Merge branch 'omap-clock-for-next' of git://git.pwsan.com/linux-2.6 into devel

7 files changed, 163 insertions, 62 deletions

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ba528f85749c..b0665f161c03 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -302,7 +302,7 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
                 udelay(1);
         }
 
-        if (i < MAX_CLOCK_ENABLE_WAIT)
+        if (i <= MAX_CLOCK_ENABLE_WAIT)
                 pr_debug("Clock %s stable after %d loops\n", name, i);
         else
                 printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 9e43fe5209d3..045da923e75b 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -286,6 +286,20 @@ static struct omap_clk omap34xx_clks[] = {
 
 #define MIN_SDRC_DLL_LOCK_FREQ          83000000
 
+#define CYCLES_PER_MHZ                  1000000
+
+/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
+#define SDRC_MPURATE_SCALE              8
+
+/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
+#define SDRC_MPURATE_BASE_SHIFT         9
+
+/*
+ * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
+ * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
+ */
+#define SDRC_MPURATE_LOOPS              96
+
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
@@ -709,7 +723,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 {
         u32 new_div = 0;
         u32 unlock_dll = 0;
-        unsigned long validrate, sdrcrate;
+        u32 c;
+        unsigned long validrate, sdrcrate, mpurate;
         struct omap_sdrc_params *sp;
 
         if (!clk || !rate)
@@ -718,18 +733,15 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
         if (clk != &dpll3_m2_ck)
                 return -EINVAL;
 
-        if (rate == clk->rate)
-                return 0;
-
         validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
         if (validrate != rate)
                 return -EINVAL;
 
         sdrcrate = sdrc_ick.rate;
         if (rate > clk->rate)
-                sdrcrate <<= ((rate / clk->rate) - 1);
+                sdrcrate <<= ((rate / clk->rate) >> 1);
         else
-                sdrcrate >>= ((clk->rate / rate) - 1);
+                sdrcrate >>= ((clk->rate / rate) >> 1);
 
         sp = omap2_sdrc_get_params(sdrcrate);
         if (!sp)
@@ -740,17 +752,25 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
                 unlock_dll = 1;
         }
 
+        /*
+         * XXX This only needs to be done when the CPU frequency changes
+         */
+        mpurate = arm_fck.rate / CYCLES_PER_MHZ;
+        c = (mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
+        c += 1;  /* for safety */
+        c *= SDRC_MPURATE_LOOPS;
+        c >>= SDRC_MPURATE_SCALE;
+        if (c == 0)
+                c = 1;
+
         pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
                  validrate);
         pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
                  sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
 
-        /* REVISIT: SRAM code doesn't support other M2 divisors yet */
-        WARN_ON(new_div != 1 && new_div != 2);
-
-        /* REVISIT: Add SDRC_MR changing to this code also */
         omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
-                                  sp->actim_ctrlb, new_div, unlock_dll);
+                                  sp->actim_ctrlb, new_div, unlock_dll, c,
+                                  sp->mr, rate > clk->rate);
 
         return 0;
 }
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 32afd9448216..3a86b0f66031 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <asm/tlb.h>
 
@@ -241,6 +242,40 @@ void __init omap2_map_common_io(void)
         omapfb_reserve_sdram();
 }
 
+/*
+ * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
+ *
+ * Sets the CORE DPLL3 M2 divider to the same value that it's at
+ * currently.  This has the effect of setting the SDRC SDRAM AC timing
+ * registers to the values currently defined by the kernel.  Currently
+ * only defined for OMAP3; will return 0 if called on OMAP2.  Returns
+ * -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2,
+ * or passes along the return value of clk_set_rate().
+ */
+static int __init _omap2_init_reprogram_sdrc(void)
+{
+        struct clk *dpll3_m2_ck;
+        int v = -EINVAL;
+        long rate;
+
+        if (!cpu_is_omap34xx())
+                return 0;
+
+        dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
+        if (!dpll3_m2_ck)
+                return -EINVAL;
+
+        rate = clk_get_rate(dpll3_m2_ck);
+        pr_info("Reprogramming SDRC clock to %ld Hz\n", rate);
+        v = clk_set_rate(dpll3_m2_ck, rate);
+        if (v)
+                pr_err("dpll3_m2_clk rate change failed: %d\n", v);
+
+        clk_put(dpll3_m2_ck);
+
+        return v;
+}
+
 void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 {
         omap2_mux_init();
@@ -249,6 +284,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
         clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
         omap2_clk_init();
         omap2_sdrc_init(sp);
+        _omap2_init_reprogram_sdrc();
 #endif
         gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 73e2971b1757..983f1cb676be 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1099,7 +1099,7 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
                (c++ < PWRDM_TRANSITION_BAILOUT))
                 udelay(1);
 
-        if (c >= PWRDM_TRANSITION_BAILOUT) {
+        if (c > PWRDM_TRANSITION_BAILOUT) {
                 printk(KERN_ERR "powerdomain: waited too long for "
                        "powerdomain %s to complete transition\n", pwrdm->name);
                 return -EAGAIN;
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index c080c82521e1..f41f8d96ddba 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -3,13 +3,12 @@
  *
  * Omap3 specific functions that need to be run in internal SRAM
  *
- * (C) Copyright 2007
- * Texas Instruments Inc.
- * Rajendra Nayak <rnayak@ti.com>
+ * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
  *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
+ * Rajendra Nayak <rnayak@ti.com>
  * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -37,61 +36,112 @@
 
         .text
 
+/* r4 parameters */
+#define SDRC_NO_UNLOCK_DLL              0x0
+#define SDRC_UNLOCK_DLL                 0x1
+
+/* SDRC_DLLA_CTRL bit settings */
+#define FIXEDDELAY_SHIFT                24
+#define FIXEDDELAY_MASK                 (0xff << FIXEDDELAY_SHIFT)
+#define DLLIDLE_MASK                    0x4
+
+/*
+ * SDRC_DLLA_CTRL default values: TI hardware team indicates that
+ * FIXEDDELAY should be initialized to 0xf.  This apparently was
+ * empirically determined during process testing, so no derivation
+ * was provided.
+ */
+#define FIXEDDELAY_DEFAULT              (0x0f << FIXEDDELAY_SHIFT)
+
+/* SDRC_DLLA_STATUS bit settings */
+#define LOCKSTATUS_MASK                 0x4
+
+/* SDRC_POWER bit settings */
+#define SRFRONIDLEREQ_MASK              0x40
+#define PWDENA_MASK                     0x4
+
+/* CM_IDLEST1_CORE bit settings */
+#define ST_SDRC_MASK                    0x2
+
+/* CM_ICLKEN1_CORE bit settings */
+#define EN_SDRC_MASK                    0x2
+
+/* CM_CLKSEL1_PLL bit settings */
+#define CORE_DPLL_CLKOUT_DIV_SHIFT      0x1b
+
 /*
- * Change frequency of core dpll
- * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
- * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
+ * r0 = new SDRC_RFR_CTRL register contents
+ * r1 = new SDRC_ACTIM_CTRLA register contents
+ * r2 = new SDRC_ACTIM_CTRLB register contents
+ * r3 = new M2 divider setting (only 1 and 2 supported right now)
+ * r4 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
  *      SDRC rates < 83MHz
+ * r5 = number of MPU cycles to wait for SDRC to stabilize after
+ *      reprogramming the SDRC when switching to a slower MPU speed
+ * r6 = new SDRC_MR_0 register value
+ * r7 = increasing SDRC rate? (1 = yes, 0 = no)
+ *
  */
 ENTRY(omap3_sram_configure_core_dpll)
         stmfd   sp!, {r1-r12, lr}       @ store regs to stack
         ldr     r4, [sp, #52]           @ pull extra args off the stack
+        ldr     r5, [sp, #56]           @ load extra args from the stack
+        ldr     r6, [sp, #60]           @ load extra args from the stack
+        ldr     r7, [sp, #64]           @ load extra args from the stack
         dsb                             @ flush buffered writes to interconnect
-        cmp     r3, #0x2
-        blne    configure_sdrc
-        cmp     r4, #0x1
+        cmp     r7, #1                  @ if increasing SDRC clk rate,
+        bleq    configure_sdrc          @ program the SDRC regs early (for RFR)
+        cmp     r4, #SDRC_UNLOCK_DLL    @ set the intended DLL state
         bleq    unlock_dll
         blne    lock_dll
-        bl      sdram_in_selfrefresh    @ put the SDRAM in self refresh
-        bl      configure_core_dpll
-        bl      enable_sdrc
-        cmp     r4, #0x1
+        bl      sdram_in_selfrefresh    @ put SDRAM in self refresh, idle SDRC
+        bl      configure_core_dpll     @ change the DPLL3 M2 divider
+        bl      enable_sdrc             @ take SDRC out of idle
+        cmp     r4, #SDRC_UNLOCK_DLL    @ wait for DLL status to change
         bleq    wait_dll_unlock
         blne    wait_dll_lock
-        cmp     r3, #0x1
-        blne    configure_sdrc
+        cmp     r7, #1                  @ if increasing SDRC clk rate,
+        beq     return_to_sdram         @ return to SDRAM code, otherwise,
+        bl      configure_sdrc          @ reprogram SDRC regs now
+        mov     r12, r5
+        bl      wait_clk_stable         @ wait for SDRC to stabilize
+return_to_sdram:
         isb                             @ prevent speculative exec past here
         mov     r0, #0                  @ return value
         ldmfd   sp!, {r1-r12, pc}       @ restore regs and return
 unlock_dll:
         ldr     r11, omap3_sdrc_dlla_ctrl
         ldr     r12, [r11]
-        orr     r12, r12, #0x4
+        and     r12, r12, #FIXEDDELAY_MASK
+        orr     r12, r12, #FIXEDDELAY_DEFAULT
+        orr     r12, r12, #DLLIDLE_MASK
         str     r12, [r11]              @ (no OCP barrier needed)
         bx      lr
 lock_dll:
         ldr     r11, omap3_sdrc_dlla_ctrl
         ldr     r12, [r11]
-        bic     r12, r12, #0x4
+        bic     r12, r12, #DLLIDLE_MASK
         str     r12, [r11]              @ (no OCP barrier needed)
         bx      lr
 sdram_in_selfrefresh:
         ldr     r11, omap3_sdrc_power   @ read the SDRC_POWER register
         ldr     r12, [r11]              @ read the contents of SDRC_POWER
         mov     r9, r12                 @ keep a copy of SDRC_POWER bits
-        orr     r12, r12, #0x40         @ enable self refresh on idle req
-        bic     r12, r12, #0x4          @ clear PWDENA
+        orr     r12, r12, #SRFRONIDLEREQ_MASK   @ enable self refresh on idle
+        bic     r12, r12, #PWDENA_MASK  @ clear PWDENA
         str     r12, [r11]              @ write back to SDRC_POWER register
         ldr     r12, [r11]              @ posted-write barrier for SDRC
+idle_sdrc:
         ldr     r11, omap3_cm_iclken1_core      @ read the CM_ICLKEN1_CORE reg
         ldr     r12, [r11]
-        bic     r12, r12, #0x2          @ disable iclk bit for SDRC
+        bic     r12, r12, #EN_SDRC_MASK         @ disable iclk bit for SDRC
         str     r12, [r11]
 wait_sdrc_idle:
         ldr     r11, omap3_cm_idlest1_core
         ldr     r12, [r11]
-        and     r12, r12, #0x2          @ check for SDRC idle
-        cmp     r12, #2
+        and     r12, r12, #ST_SDRC_MASK         @ check for SDRC idle
+        cmp     r12, #ST_SDRC_MASK
         bne     wait_sdrc_idle
         bx      lr
 configure_core_dpll:
@@ -99,36 +149,23 @@ configure_core_dpll:
         ldr     r12, [r11]
         ldr     r10, core_m2_mask_val   @ modify m2 for core dpll
         and     r12, r12, r10
-        orr     r12, r12, r3, lsl #0x1B @ r3 contains the M2 val
+        orr     r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
         str     r12, [r11]
         ldr     r12, [r11]              @ posted-write barrier for CM
-        mov     r12, #0x800             @ wait for the clock to stabilise
-        cmp     r3, #2
-        bne     wait_clk_stable
         bx      lr
 wait_clk_stable:
         subs    r12, r12, #1
         bne     wait_clk_stable
-        nop
-        nop
-        nop
-        nop
-        nop
-        nop
-        nop
-        nop
-        nop
-        nop
         bx      lr
 enable_sdrc:
         ldr     r11, omap3_cm_iclken1_core
         ldr     r12, [r11]
-        orr     r12, r12, #0x2          @ enable iclk bit for SDRC
+        orr     r12, r12, #EN_SDRC_MASK         @ enable iclk bit for SDRC
         str     r12, [r11]
 wait_sdrc_idle1:
         ldr     r11, omap3_cm_idlest1_core
         ldr     r12, [r11]
-        and     r12, r12, #0x2
+        and     r12, r12, #ST_SDRC_MASK
         cmp     r12, #0
         bne     wait_sdrc_idle1
 restore_sdrc_power_val:
@@ -138,14 +175,14 @@ restore_sdrc_power_val:
 wait_dll_lock:
         ldr     r11, omap3_sdrc_dlla_status
         ldr     r12, [r11]
-        and     r12, r12, #0x4
-        cmp     r12, #0x4
+        and     r12, r12, #LOCKSTATUS_MASK
+        cmp     r12, #LOCKSTATUS_MASK
         bne     wait_dll_lock
         bx      lr
 wait_dll_unlock:
         ldr     r11, omap3_sdrc_dlla_status
         ldr     r12, [r11]
-        and     r12, r12, #0x4
+        and     r12, r12, #LOCKSTATUS_MASK
         cmp     r12, #0x0
         bne     wait_dll_unlock
         bx      lr
@@ -156,7 +193,9 @@ configure_sdrc:
         str     r1, [r11]
         ldr     r11, omap3_sdrc_actim_ctrlb
         str     r2, [r11]
-        ldr     r2, [r11]               @ posted-write barrier for SDRC
+        ldr     r11, omap3_sdrc_mr_0
+        str     r6, [r11]
+        ldr     r6, [r11]               @ posted-write barrier for SDRC
         bx      lr
 
 omap3_sdrc_power:
@@ -173,6 +212,8 @@ omap3_sdrc_actim_ctrla:
         .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
 omap3_sdrc_actim_ctrlb:
         .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_mr_0:
+        .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
 omap3_sdrc_dlla_status:
         .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 omap3_sdrc_dlla_ctrl:
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index dca7c16ae903..4d53cc59d7a3 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -24,7 +24,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
                                      u32 sdrc_actim_ctrla,
                                      u32 sdrc_actim_ctrlb, u32 m2,
-                                     u32 unlock_dll);
+                                     u32 unlock_dll, u32 f, u32 sdrc_mr,
+                                     u32 inc);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -62,7 +63,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
                                           u32 sdrc_actim_ctrla,
                                           u32 sdrc_actim_ctrlb, u32 m2,
-                                          u32 unlock_dll);
+                                          u32 unlock_dll, u32 f, u32 sdrc_mr,
+                                          u32 inc);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
 #endif
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index a5b9bcd6b108..65006df3f1b7 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -371,15 +371,17 @@ static inline int omap243x_sram_init(void)
 static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
                                               u32 sdrc_actim_ctrla,
                                               u32 sdrc_actim_ctrlb,
-                                              u32 m2, u32 unlock_dll);
+                                              u32 m2, u32 unlock_dll,
+                                              u32 f, u32 sdrc_mr, u32 inc);
 u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
-                              u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
+                              u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
+                              u32 f, u32 sdrc_mr, u32 inc)
 {
         BUG_ON(!_omap3_sram_configure_core_dpll);
         return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
                                                sdrc_actim_ctrla,
                                                sdrc_actim_ctrlb, m2,
-                                               unlock_dll);
+                                               unlock_dll, f, sdrc_mr, inc);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */