ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring

NAND uses wait pin only to indicate device readiness after
a block/page operation. It is not use to extend individual
read/write cycle and so read/write wait pin monitoring must
be disabled for NAND.

This patch also gets rid of the below warning when NAND is
accessed for the first time.

omap_l3_noc 44000000.ocp: L3 application error: target 13 mod:1 (unclearable)

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Pekon Gupta <pekon@pek-sem.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 0 insertions, 2 deletions

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index bd64159e6b32..e7ac47fa6615 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -443,8 +443,6 @@
                 gpmc,rd-cycle-ns = <40>;
                 gpmc,wr-cycle-ns = <40>;
                 gpmc,wait-pin = <0>;
-                gpmc,wait-on-read;
-                gpmc,wait-on-write;
                 gpmc,bus-turnaround-ns = <0>;
                 gpmc,cycle2cycle-delay-ns = <0>;
                 gpmc,clk-activation-ns = <0>;