Merge branch 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits)
  ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET
  ARM: gic, local timers: use the request_percpu_irq() interface
  ARM: gic: consolidate PPI handling
  ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H
  ARM: mach-s5p64x0: remove mach/memory.h
  ARM: mach-s3c64xx: remove mach/memory.h
  ARM: plat-mxc: remove mach/memory.h
  ARM: mach-prima2: remove mach/memory.h
  ARM: mach-zynq: remove mach/memory.h
  ARM: mach-bcmring: remove mach/memory.h
  ARM: mach-davinci: remove mach/memory.h
  ARM: mach-pxa: remove mach/memory.h
  ARM: mach-ixp4xx: remove mach/memory.h
  ARM: mach-h720x: remove mach/memory.h
  ARM: mach-vt8500: remove mach/memory.h
  ARM: mach-s5pc100: remove mach/memory.h
  ARM: mach-tegra: remove mach/memory.h
  ARM: plat-tcc: remove mach/memory.h
  ARM: mach-mmp: remove mach/memory.h
  ARM: mach-cns3xxx: remove mach/memory.h
  ...

Fix up mostly pretty trivial conflicts in:
 - arch/arm/Kconfig
 - arch/arm/include/asm/localtimer.h
 - arch/arm/kernel/Makefile
 - arch/arm/mach-shmobile/board-ap4evb.c
 - arch/arm/mach-u300/core.c
 - arch/arm/mm/dma-mapping.c
 - arch/arm/mm/proc-v7.S
 - arch/arm/plat-omap/Kconfig
largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP ->
CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and
addition of NEED_MACH_MEMORY_H next to HAVE_IDE.

524 files changed, 7566 insertions, 2887 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e91cec43f2c0..5ca86e7ab66d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -29,6 +29,7 @@ config ARM
         select HAVE_GENERIC_HARDIRQS
         select HAVE_SPARSE_IRQ
         select GENERIC_IRQ_SHOW
+        select CPU_PM if (SUSPEND || CPU_IDLE)
         help
           The ARM series is a line of low-power-consumption RISC chip designs
           licensed by ARM Ltd and targeted at embedded applications and
@@ -211,6 +212,19 @@ config ARM_PATCH_PHYS_VIRT
           this feature (eg, building a kernel for a single machine) and
           you need to shrink the kernel to the minimal size.
 
+config NEED_MACH_MEMORY_H
+        bool
+        help
+          Select this when mach/memory.h is required to provide special
+          definitions for this platform.  The need for mach/memory.h should
+          be avoided when possible.
+
+config PHYS_OFFSET
+        hex "Physical address of main memory"
+        depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+        help
+          Please provide the physical address corresponding to the
+          location of main memory in your system.
 
 config GENERIC_BUG
         def_bool y
@@ -247,6 +261,7 @@ config ARCH_INTEGRATOR
         select GENERIC_CLOCKEVENTS
         select PLAT_VERSATILE
         select PLAT_VERSATILE_FPGA_IRQ
+        select NEED_MACH_MEMORY_H
         help
           Support for ARM's Integrator platform.
 
@@ -262,6 +277,7 @@ config ARCH_REALVIEW
         select PLAT_VERSATILE_CLCD
         select ARM_TIMER_SP804
         select GPIO_PL061 if GPIOLIB
+        select NEED_MACH_MEMORY_H
         help
           This enables support for ARM Ltd RealView boards.
 
@@ -322,6 +338,7 @@ config ARCH_CLPS711X
         bool "Cirrus Logic CLPS711x/EP721x-based"
         select CPU_ARM720T
         select ARCH_USES_GETTIMEOFFSET
+        select NEED_MACH_MEMORY_H
         help
           Support for Cirrus Logic 711x/721x based boards.
 
@@ -361,6 +378,7 @@ config ARCH_EBSA110
         select ISA
         select NO_IOPORT
         select ARCH_USES_GETTIMEOFFSET
+        select NEED_MACH_MEMORY_H
         help
           This is an evaluation board for the StrongARM processor available
           from Digital. It has limited hardware on-board, including an
@@ -376,6 +394,7 @@ config ARCH_EP93XX
         select ARCH_REQUIRE_GPIOLIB
         select ARCH_HAS_HOLES_MEMORYMODEL
         select ARCH_USES_GETTIMEOFFSET
+        select NEED_MEMORY_H
         help
           This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -385,6 +404,7 @@ config ARCH_FOOTBRIDGE
         select FOOTBRIDGE
         select GENERIC_CLOCKEVENTS
         select HAVE_IDE
+        select NEED_MACH_MEMORY_H
         help
           Support for systems based on the DC21285 companion chip
           ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -434,6 +454,7 @@ config ARCH_IOP13XX
         select PCI
         select ARCH_SUPPORTS_MSI
         select VMSPLIT_1G
+        select NEED_MACH_MEMORY_H
         help
           Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -464,6 +485,7 @@ config ARCH_IXP23XX
         select CPU_XSC3
         select PCI
         select ARCH_USES_GETTIMEOFFSET
+        select NEED_MACH_MEMORY_H
         help
           Support for Intel's IXP23xx (XScale) family of processors.
 
@@ -473,6 +495,7 @@ config ARCH_IXP2000
         select CPU_XSCALE
         select PCI
         select ARCH_USES_GETTIMEOFFSET
+        select NEED_MACH_MEMORY_H
         help
           Support for Intel's IXP2400/2800 (XScale) family of processors.
 
@@ -565,6 +588,7 @@ config ARCH_KS8695
         select CPU_ARM922T
         select ARCH_REQUIRE_GPIOLIB
         select ARCH_USES_GETTIMEOFFSET
+        select NEED_MACH_MEMORY_H
         help
           Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
           System-on-Chip devices.
@@ -657,6 +681,7 @@ config ARCH_SHMOBILE
         select SPARSE_IRQ
         select MULTI_IRQ_HANDLER
         select PM_GENERIC_DOMAINS if PM
+        select NEED_MACH_MEMORY_H
         help
           Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
 
@@ -672,6 +697,7 @@ config ARCH_RPC
         select ARCH_SPARSEMEM_ENABLE
         select ARCH_USES_GETTIMEOFFSET
         select HAVE_IDE
+        select NEED_MACH_MEMORY_H
         help
           On the Acorn Risc-PC, Linux can support the internal IDE disk and
           CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -691,6 +717,7 @@ config ARCH_SA1100
         select TICK_ONESHOT
         select ARCH_REQUIRE_GPIOLIB
         select HAVE_IDE
+        select NEED_MACH_MEMORY_H
         help
           Support for StrongARM 11x0 based boards.
 
@@ -782,6 +809,7 @@ config ARCH_S5PV210
         select HAVE_S3C2410_I2C if I2C
         select HAVE_S3C_RTC if RTC_CLASS
         select HAVE_S3C2410_WATCHDOG if WATCHDOG
+        select NEED_MACH_MEMORY_H
         help
           Samsung S5PV210/S5PC110 series based systems
 
@@ -798,6 +826,7 @@ config ARCH_EXYNOS4
         select HAVE_S3C_RTC if RTC_CLASS
         select HAVE_S3C2410_I2C if I2C
         select HAVE_S3C2410_WATCHDOG if WATCHDOG
+        select NEED_MACH_MEMORY_H
         help
           Samsung EXYNOS4 series based systems
 
@@ -809,6 +838,7 @@ config ARCH_SHARK
         select ZONE_DMA
         select PCI
         select ARCH_USES_GETTIMEOFFSET
+        select NEED_MACH_MEMORY_H
         help
           Support for the StrongARM based Digital DNARD machine, also known
           as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -837,6 +867,7 @@ config ARCH_U300
         select HAVE_MACH_CLKDEV
         select GENERIC_GPIO
         select ARCH_REQUIRE_GPIOLIB
+        select NEED_MACH_MEMORY_H
         help
           Support for ST-Ericsson U300 series mobile platforms.
 
@@ -1835,6 +1866,38 @@ config ZBOOT_ROM_SH_MOBILE_SDHI
 
 endchoice
 
+config ARM_APPENDED_DTB
+        bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
+        depends on OF && !ZBOOT_ROM && EXPERIMENTAL
+        help
+          With this option, the boot code will look for a device tree binary
+          (DTB) appended to zImage
+          (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
+
+          This is meant as a backward compatibility convenience for those
+          systems with a bootloader that can't be upgraded to accommodate
+          the documented boot protocol using a device tree.
+
+          Beware that there is very little in terms of protection against
+          this option being confused by leftover garbage in memory that might
+          look like a DTB header after a reboot if no actual DTB is appended
+          to zImage.  Do not leave this option active in a production kernel
+          if you don't intend to always append a DTB.  Proper passing of the
+          location into r2 of a bootloader provided DTB is always preferable
+          to this option.
+
+config ARM_ATAG_DTB_COMPAT
+        bool "Supplement the appended DTB with traditional ATAG information"
+        depends on ARM_APPENDED_DTB
+        help
+          Some old bootloaders can't be updated to a DTB capable one, yet
+          they provide ATAGs with memory configuration, the ramdisk address,
+          the kernel cmdline string, etc.  Such information is dynamically
+          provided by the bootloader and can't always be stored in a static
+          DTB.  To allow a device tree enabled kernel to be used with such
+          bootloaders, this option allows zImage to extract the information
+          from the ATAG list and store it at run time into the appended DTB.
+
 config CMDLINE
         string "Default kernel command string"
         default ""
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index df3eb3ccd769..f283938c2fc7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -158,4 +158,10 @@ config DEBUG_S3C_UART
           The uncompressor code port configuration is now handled
           by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
+config ARM_KPROBES_TEST
+        tristate "Kprobes test module"
+        depends on KPROBES && MODULES
+        help
+          Perform tests of kprobes API and instruction set simulation.
+
 endmenu
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index c6028967d336..e0936a148516 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -5,3 +5,12 @@ piggy.lzo
 piggy.lzma
 vmlinux
 vmlinux.lds
+
+# borrowed libfdt files
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index a6b30b35ca65..21f56ff32797 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -26,6 +26,10 @@ HEAD	= head.o
 OBJS    += misc.o decompress.o
 FONTC   = $(srctree)/drivers/video/console/font_acorn_8x8.c
 
+# string library code (-Os is enforced to keep it much smaller)
+OBJS            += string.o
+CFLAGS_string.o := -Os
+
 #
 # Architecture dependencies
 #
@@ -89,21 +93,41 @@ suffix_$(CONFIG_KERNEL_GZIP) = gzip
 suffix_$(CONFIG_KERNEL_LZO)  = lzo
 suffix_$(CONFIG_KERNEL_LZMA) = lzma
 
+# Borrowed libfdt files for the ATAG compatibility mode
+
+libfdt          := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
+libfdt_hdrs     := fdt.h libfdt.h libfdt_internal.h
+
+libfdt_objs     := $(addsuffix .o, $(basename $(libfdt)))
+
+$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+        $(call cmd,shipped)
+
+$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
+        $(addprefix $(obj)/,$(libfdt_hdrs))
+
+ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+OBJS    += $(libfdt_objs) atags_to_fdt.o
+endif
+
 targets       := vmlinux vmlinux.lds \
                  piggy.$(suffix_y) piggy.$(suffix_y).o \
-                 font.o font.c head.o misc.o $(OBJS)
+                 lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS)
 
 # Make sure files are removed during clean
-extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs)
 
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
-ccflags-y := -fpic -fno-builtin
+ccflags-y := -fpic -fno-builtin -I$(obj)
 asflags-y := -Wa,-march=all
 
+# Supply kernel BSS size to the decompressor via a linker symbol.
+KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
+LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
 LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
@@ -123,7 +147,7 @@ LDFLAGS_vmlinux += -T
 # For __aeabi_uidivmod
 lib1funcs = $(obj)/lib1funcs.o
 
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
         $(call cmd,shipped)
 
 # We need to prevent any GOTOFF relocs being used with references
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
new file mode 100644
index 000000000000..6ce11c481178
--- /dev/null
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -0,0 +1,97 @@
+#include <asm/setup.h>
+#include <libfdt.h>
+
+static int node_offset(void *fdt, const char *node_path)
+{
+        int offset = fdt_path_offset(fdt, node_path);
+        if (offset == -FDT_ERR_NOTFOUND)
+                offset = fdt_add_subnode(fdt, 0, node_path);
+        return offset;
+}
+
+static int setprop(void *fdt, const char *node_path, const char *property,
+                   uint32_t *val_array, int size)
+{
+        int offset = node_offset(fdt, node_path);
+        if (offset < 0)
+                return offset;
+        return fdt_setprop(fdt, offset, property, val_array, size);
+}
+
+static int setprop_string(void *fdt, const char *node_path,
+                          const char *property, const char *string)
+{
+        int offset = node_offset(fdt, node_path);
+        if (offset < 0)
+                return offset;
+        return fdt_setprop_string(fdt, offset, property, string);
+}
+
+static int setprop_cell(void *fdt, const char *node_path,
+                        const char *property, uint32_t val)
+{
+        int offset = node_offset(fdt, node_path);
+        if (offset < 0)
+                return offset;
+        return fdt_setprop_cell(fdt, offset, property, val);
+}
+
+/*
+ * Convert and fold provided ATAGs into the provided FDT.
+ *
+ * REturn values:
+ *    = 0 -> pretend success
+ *    = 1 -> bad ATAG (may retry with another possible ATAG pointer)
+ *    < 0 -> error from libfdt
+ */
+int atags_to_fdt(void *atag_list, void *fdt, int total_space)
+{
+        struct tag *atag = atag_list;
+        uint32_t mem_reg_property[2 * NR_BANKS];
+        int memcount = 0;
+        int ret;
+
+        /* make sure we've got an aligned pointer */
+        if ((u32)atag_list & 0x3)
+                return 1;
+
+        /* if we get a DTB here we're done already */
+        if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
+               return 0;
+
+        /* validate the ATAG */
+        if (atag->hdr.tag != ATAG_CORE ||
+            (atag->hdr.size != tag_size(tag_core) &&
+             atag->hdr.size != 2))
+                return 1;
+
+        /* let's give it all the room it could need */
+        ret = fdt_open_into(fdt, fdt, total_space);
+        if (ret < 0)
+                return ret;
+
+        for_each_tag(atag, atag_list) {
+                if (atag->hdr.tag == ATAG_CMDLINE) {
+                        setprop_string(fdt, "/chosen", "bootargs",
+                                        atag->u.cmdline.cmdline);
+                } else if (atag->hdr.tag == ATAG_MEM) {
+                        if (memcount >= sizeof(mem_reg_property)/4)
+                                continue;
+                        mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
+                        mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
+                } else if (atag->hdr.tag == ATAG_INITRD2) {
+                        uint32_t initrd_start, initrd_size;
+                        initrd_start = atag->u.initrd.start;
+                        initrd_size = atag->u.initrd.size;
+                        setprop_cell(fdt, "/chosen", "linux,initrd-start",
+                                        initrd_start);
+                        setprop_cell(fdt, "/chosen", "linux,initrd-end",
+                                        initrd_start + initrd_size);
+                }
+        }
+
+        if (memcount)
+                setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
+
+        return fdt_pack(fdt);
+}
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index e95a5989602a..c2effc917254 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -216,6 +216,104 @@ restart:	adr	r0, LC0
                 mov     r10, r6
 #endif
 
+                mov     r5, #0                  @ init dtb size to 0
+#ifdef CONFIG_ARM_APPENDED_DTB
+/*
+ *   r0  = delta
+ *   r2  = BSS start
+ *   r3  = BSS end
+ *   r4  = final kernel address
+ *   r5  = appended dtb size (still unknown)
+ *   r6  = _edata
+ *   r7  = architecture ID
+ *   r8  = atags/device tree pointer
+ *   r9  = size of decompressed image
+ *   r10 = end of this image, including  bss/stack/malloc space if non XIP
+ *   r11 = GOT start
+ *   r12 = GOT end
+ *   sp  = stack pointer
+ *
+ * if there are device trees (dtb) appended to zImage, advance r10 so that the
+ * dtb data will get relocated along with the kernel if necessary.
+ */
+
+                ldr     lr, [r6, #0]
+#ifndef __ARMEB__
+                ldr     r1, =0xedfe0dd0         @ sig is 0xd00dfeed big endian
+#else
+                ldr     r1, =0xd00dfeed
+#endif
+                cmp     lr, r1
+                bne     dtb_check_done          @ not found
+
+#ifdef CONFIG_ARM_ATAG_DTB_COMPAT
+                /*
+                 * OK... Let's do some funky business here.
+                 * If we do have a DTB appended to zImage, and we do have
+                 * an ATAG list around, we want the later to be translated
+                 * and folded into the former here.  To be on the safe side,
+                 * let's temporarily move  the stack away into the malloc
+                 * area.  No GOT fixup has occurred yet, but none of the
+                 * code we're about to call uses any global variable.
+                */
+                add     sp, sp, #0x10000
+                stmfd   sp!, {r0-r3, ip, lr}
+                mov     r0, r8
+                mov     r1, r6
+                sub     r2, sp, r6
+                bl      atags_to_fdt
+
+                /*
+                 * If returned value is 1, there is no ATAG at the location
+                 * pointed by r8.  Try the typical 0x100 offset from start
+                 * of RAM and hope for the best.
+                 */
+                cmp     r0, #1
+                sub     r0, r4, #TEXT_OFFSET
+                add     r0, r0, #0x100
+                mov     r1, r6
+                sub     r2, sp, r6
+                blne    atags_to_fdt
+
+                ldmfd   sp!, {r0-r3, ip, lr}
+                sub     sp, sp, #0x10000
+#endif
+
+                mov     r8, r6                  @ use the appended device tree
+
+                /*
+                 * Make sure that the DTB doesn't end up in the final
+                 * kernel's .bss area. To do so, we adjust the decompressed
+                 * kernel size to compensate if that .bss size is larger
+                 * than the relocated code.
+                 */
+                ldr     r5, =_kernel_bss_size
+                adr     r1, wont_overwrite
+                sub     r1, r6, r1
+                subs    r1, r5, r1
+                addhi   r9, r9, r1
+
+                /* Get the dtb's size */
+                ldr     r5, [r6, #4]
+#ifndef __ARMEB__
+                /* convert r5 (dtb size) to little endian */
+                eor     r1, r5, r5, ror #16
+                bic     r1, r1, #0x00ff0000
+                mov     r5, r5, ror #8
+                eor     r5, r5, r1, lsr #8
+#endif
+
+                /* preserve 64-bit alignment */
+                add     r5, r5, #7
+                bic     r5, r5, #7
+
+                /* relocate some pointers past the appended dtb */
+                add     r6, r6, r5
+                add     r10, r10, r5
+                add     sp, sp, r5
+dtb_check_done:
+#endif
+
 /*
  * Check to see if we will overwrite ourselves.
  *   r4  = final kernel address
@@ -223,15 +321,14 @@ restart:	adr	r0, LC0
  *   r10 = end of this image, including  bss/stack/malloc space if non XIP
  * We basically want:
  *   r4 - 16k page directory >= r10 -> OK
- *   r4 + image length <= current position (pc) -> OK
+ *   r4 + image length <= address of wont_overwrite -> OK
  */
                 add     r10, r10, #16384
                 cmp     r4, r10
                 bhs     wont_overwrite
                 add     r10, r4, r9
-   ARM(         cmp     r10, pc         )
- THUMB(         mov     lr, pc          )
- THUMB(         cmp     r10, lr         )
+                adr     r9, wont_overwrite
+                cmp     r10, r9
                 bls     wont_overwrite
 
 /*
@@ -285,14 +382,16 @@ wont_overwrite:
  *   r2  = BSS start
  *   r3  = BSS end
  *   r4  = kernel execution address
+ *   r5  = appended dtb size (0 if not present)
  *   r7  = architecture ID
  *   r8  = atags pointer
  *   r11 = GOT start
  *   r12 = GOT end
  *   sp  = stack pointer
  */
-                teq     r0, #0
+                orrs    r1, r0, r5
                 beq     not_relocated
+
                 add     r11, r11, r0
                 add     r12, r12, r0
 
@@ -307,12 +406,21 @@ wont_overwrite:
 
                 /*
                  * Relocate all entries in the GOT table.
+                 * Bump bss entries to _edata + dtb size
                  */
 1:              ldr     r1, [r11, #0]           @ relocate entries in the GOT
-                add     r1, r1, r0              @ table.  This fixes up the
-                str     r1, [r11], #4           @ C references.
+                add     r1, r1, r0              @ This fixes up C references
+                cmp     r1, r2                  @ if entry >= bss_start &&
+                cmphs   r3, r1                  @       bss_end > entry
+                addhi   r1, r1, r5              @    entry += dtb size
+                str     r1, [r11], #4           @ next entry
                 cmp     r11, r12
                 blo     1b
+
+                /* bump our bss pointers too */
+                add     r2, r2, r5
+                add     r3, r3, r5
+
 #else
 
                 /*
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
new file mode 100644
index 000000000000..1f4e71876b00
--- /dev/null
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -0,0 +1,15 @@
+#ifndef _ARM_LIBFDT_ENV_H
+#define _ARM_LIBFDT_ENV_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/byteorder.h>
+
+#define fdt16_to_cpu(x)         be16_to_cpu(x)
+#define cpu_to_fdt16(x)         cpu_to_be16(x)
+#define fdt32_to_cpu(x)         be32_to_cpu(x)
+#define cpu_to_fdt32(x)         cpu_to_be32(x)
+#define fdt64_to_cpu(x)         be64_to_cpu(x)
+#define cpu_to_fdt64(x)         cpu_to_be64(x)
+
+#endif
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 832d37236c59..8e2a8fca5ed2 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -18,14 +18,9 @@
 
 unsigned int __machine_arch_type;
 
-#define _LINUX_STRING_H_
-
 #include <linux/compiler.h>     /* for inline */
-#include <linux/types.h>        /* for size_t */
-#include <linux/stddef.h>       /* for NULL */
+#include <linux/types.h>
 #include <linux/linkage.h>
-#include <asm/string.h>
-
 
 static void putstr(const char *ptr);
 extern void error(char *x);
@@ -101,41 +96,6 @@ static void putstr(const char *ptr)
         flush();
 }
 
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-        int i = 0;
-        unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
-
-        for (i = __n >> 3; i > 0; i--) {
-                *d++ = *s++;
-                *d++ = *s++;
-                *d++ = *s++;
-                *d++ = *s++;
-                *d++ = *s++;
-                *d++ = *s++;
-                *d++ = *s++;
-                *d++ = *s++;
-        }
-
-        if (__n & 1 << 2) {
-                *d++ = *s++;
-                *d++ = *s++;
-                *d++ = *s++;
-                *d++ = *s++;
-        }
-
-        if (__n & 1 << 1) {
-                *d++ = *s++;
-                *d++ = *s++;
-        }
-
-        if (__n & 1)
-                *d++ = *s++;
-
-        return __dest;
-}
-
 /*
  * gzip declarations
  */
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
new file mode 100644
index 000000000000..36e53ef9200f
--- /dev/null
+++ b/arch/arm/boot/compressed/string.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/boot/compressed/string.c
+ *
+ * Small subset of simple string routines
+ */
+
+#include <linux/string.h>
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+        int i = 0;
+        unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
+
+        for (i = __n >> 3; i > 0; i--) {
+                *d++ = *s++;
+                *d++ = *s++;
+                *d++ = *s++;
+                *d++ = *s++;
+                *d++ = *s++;
+                *d++ = *s++;
+                *d++ = *s++;
+                *d++ = *s++;
+        }
+
+        if (__n & 1 << 2) {
+                *d++ = *s++;
+                *d++ = *s++;
+                *d++ = *s++;
+                *d++ = *s++;
+        }
+
+        if (__n & 1 << 1) {
+                *d++ = *s++;
+                *d++ = *s++;
+        }
+
+        if (__n & 1)
+                *d++ = *s++;
+
+        return __dest;
+}
+
+void *memmove(void *__dest, __const void *__src, size_t count)
+{
+        unsigned char *d = __dest;
+        const unsigned char *s = __src;
+
+        if (__dest == __src)
+                return __dest;
+
+        if (__dest < __src)
+                return memcpy(__dest, __src, count);
+
+        while (count--)
+                d[count] = s[count];
+        return __dest;
+}
+
+size_t strlen(const char *s)
+{
+        const char *sc = s;
+
+        while (*sc != '\0')
+                sc++;
+        return sc - s;
+}
+
+int memcmp(const void *cs, const void *ct, size_t count)
+{
+        const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
+        int res = 0;
+
+        while (su1 < end) {
+                res = *su1++ - *su2++;
+                if (res)
+                        break;
+        }
+        return res;
+}
+
+int strcmp(const char *cs, const char *ct)
+{
+        unsigned char c1, c2;
+        int res = 0;
+
+        do {
+                c1 = *cs++;
+                c2 = *ct++;
+                res = c1 - c2;
+                if (res)
+                        break;
+        } while (c1);
+        return res;
+}
+
+void *memchr(const void *s, int c, size_t count)
+{
+        const unsigned char *p = s;
+
+        while (count--)
+                if ((unsigned char)c == *p++)
+                        return (void *)(p - 1);
+        return NULL;
+}
+
+char *strchr(const char *s, int c)
+{
+        while (*s != (char)c)
+                if (*s++ == '\0')
+                        return NULL;
+        return (char *)s;
+}
+
+#undef memset
+
+void *memset(void *s, int c, size_t count)
+{
+        char *xs = s;
+        while (count--)
+                *xs++ = c;
+        return s;
+}
+
+void __memzero(void *s, size_t count)
+{
+        memset(s, 0, count);
+}
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 4e728834a1b9..4919f2ac8b89 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -51,6 +51,10 @@ SECTIONS
   _got_start = .;
   .got                  : { *(.got) }
   _got_end = .;
+
+  /* ensure the zImage file size is always a multiple of 64 bits */
+  /* (without a dummy byte, ld just ignores the empty section) */
+  .pad                  : { BYTE(0); . = ALIGN(8); }
   _edata = .;
 
   . = BSS_START;
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index bdbb3f74f0fe..a8fc6b237592 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -26,8 +26,12 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/smp.h>
+#include <linux/cpu_pm.h>
 #include <linux/cpumask.h>
 #include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
 
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
@@ -262,6 +266,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
         u32 cpumask;
         void __iomem *base = gic->dist_base;
         u32 cpu = 0;
+        u32 nrppis = 0, ppi_base = 0;
 
 #ifdef CONFIG_SMP
         cpu = cpu_logical_map(smp_processor_id());
@@ -282,6 +287,25 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
         if (gic_irqs > 1020)
                 gic_irqs = 1020;
 
+        gic->gic_irqs = gic_irqs;
+
+        /*
+         * Nobody would be insane enough to use PPIs on a secondary
+         * GIC, right?
+         */
+        if (gic == &gic_data[0]) {
+                nrppis = (32 - irq_start) & 31;
+
+                /* The GIC only supports up to 16 PPIs. */
+                if (nrppis > 16)
+                        BUG();
+
+                ppi_base = gic->irq_offset + 32 - nrppis;
+        }
+
+        pr_info("Configuring GIC with %d sources (%d PPIs)\n",
+                gic_irqs, (gic == &gic_data[0]) ? nrppis : 0);
+
         /*
          * Set all global interrupts to be level triggered, active low.
          */
@@ -317,7 +341,17 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
         /*
          * Setup the Linux IRQ subsystem.
          */
-        for (i = irq_start; i < irq_limit; i++) {
+        for (i = 0; i < nrppis; i++) {
+                int ppi = i + ppi_base;
+
+                irq_set_percpu_devid(ppi);
+                irq_set_chip_and_handler(ppi, &gic_chip,
+                                         handle_percpu_devid_irq);
+                irq_set_chip_data(ppi, gic);
+                set_irq_flags(ppi, IRQF_VALID | IRQF_NOAUTOEN);
+        }
+
+        for (i = irq_start + nrppis; i < irq_limit; i++) {
                 irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
                 irq_set_chip_data(i, gic);
                 set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
@@ -349,6 +383,189 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
         writel_relaxed(1, base + GIC_CPU_CTRL);
 }
 
+#ifdef CONFIG_CPU_PM
+/*
+ * Saves the GIC distributor registers during suspend or idle.  Must be called
+ * with interrupts disabled but before powering down the GIC.  After calling
+ * this function, no interrupts will be delivered by the GIC, and another
+ * platform-specific wakeup source must be enabled.
+ */
+static void gic_dist_save(unsigned int gic_nr)
+{
+        unsigned int gic_irqs;
+        void __iomem *dist_base;
+        int i;
+
+        if (gic_nr >= MAX_GIC_NR)
+                BUG();
+
+        gic_irqs = gic_data[gic_nr].gic_irqs;
+        dist_base = gic_data[gic_nr].dist_base;
+
+        if (!dist_base)
+                return;
+
+        for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+                gic_data[gic_nr].saved_spi_conf[i] =
+                        readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+        for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+                gic_data[gic_nr].saved_spi_target[i] =
+                        readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
+
+        for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+                gic_data[gic_nr].saved_spi_enable[i] =
+                        readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+}
+
+/*
+ * Restores the GIC distributor registers during resume or when coming out of
+ * idle.  Must be called before enabling interrupts.  If a level interrupt
+ * that occured while the GIC was suspended is still present, it will be
+ * handled normally, but any edge interrupts that occured will not be seen by
+ * the GIC and need to be handled by the platform-specific wakeup source.
+ */
+static void gic_dist_restore(unsigned int gic_nr)
+{
+        unsigned int gic_irqs;
+        unsigned int i;
+        void __iomem *dist_base;
+
+        if (gic_nr >= MAX_GIC_NR)
+                BUG();
+
+        gic_irqs = gic_data[gic_nr].gic_irqs;
+        dist_base = gic_data[gic_nr].dist_base;
+
+        if (!dist_base)
+                return;
+
+        writel_relaxed(0, dist_base + GIC_DIST_CTRL);
+
+        for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+                writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
+                        dist_base + GIC_DIST_CONFIG + i * 4);
+
+        for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+                writel_relaxed(0xa0a0a0a0,
+                        dist_base + GIC_DIST_PRI + i * 4);
+
+        for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+                writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
+                        dist_base + GIC_DIST_TARGET + i * 4);
+
+        for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+                writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
+                        dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+        writel_relaxed(1, dist_base + GIC_DIST_CTRL);
+}
+
+static void gic_cpu_save(unsigned int gic_nr)
+{
+        int i;
+        u32 *ptr;
+        void __iomem *dist_base;
+        void __iomem *cpu_base;
+
+        if (gic_nr >= MAX_GIC_NR)
+                BUG();
+
+        dist_base = gic_data[gic_nr].dist_base;
+        cpu_base = gic_data[gic_nr].cpu_base;
+
+        if (!dist_base || !cpu_base)
+                return;
+
+        ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+        for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+                ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+        ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+        for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+                ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+}
+
+static void gic_cpu_restore(unsigned int gic_nr)
+{
+        int i;
+        u32 *ptr;
+        void __iomem *dist_base;
+        void __iomem *cpu_base;
+
+        if (gic_nr >= MAX_GIC_NR)
+                BUG();
+
+        dist_base = gic_data[gic_nr].dist_base;
+        cpu_base = gic_data[gic_nr].cpu_base;
+
+        if (!dist_base || !cpu_base)
+                return;
+
+        ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+        for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+                writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+        ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+        for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+                writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
+
+        for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
+                writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
+
+        writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
+        writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
+}
+
+static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
+{
+        int i;
+
+        for (i = 0; i < MAX_GIC_NR; i++) {
+                switch (cmd) {
+                case CPU_PM_ENTER:
+                        gic_cpu_save(i);
+                        break;
+                case CPU_PM_ENTER_FAILED:
+                case CPU_PM_EXIT:
+                        gic_cpu_restore(i);
+                        break;
+                case CPU_CLUSTER_PM_ENTER:
+                        gic_dist_save(i);
+                        break;
+                case CPU_CLUSTER_PM_ENTER_FAILED:
+                case CPU_CLUSTER_PM_EXIT:
+                        gic_dist_restore(i);
+                        break;
+                }
+        }
+
+        return NOTIFY_OK;
+}
+
+static struct notifier_block gic_notifier_block = {
+        .notifier_call = gic_notifier,
+};
+
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+        gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
+                sizeof(u32));
+        BUG_ON(!gic->saved_ppi_enable);
+
+        gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
+                sizeof(u32));
+        BUG_ON(!gic->saved_ppi_conf);
+
+        cpu_pm_register_notifier(&gic_notifier_block);
+}
+#else
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+}
+#endif
+
 void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
         void __iomem *dist_base, void __iomem *cpu_base)
 {
@@ -364,8 +581,10 @@ void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
         if (gic_nr == 0)
                 gic_cpu_base_addr = cpu_base;
 
+        gic_chip.flags |= gic_arch_extn.flags;
         gic_dist_init(gic, irq_start);
         gic_cpu_init(gic);
+        gic_pm_init(gic);
 }
 
 void __cpuinit gic_secondary_init(unsigned int gic_nr)
@@ -375,16 +594,6 @@ void __cpuinit gic_secondary_init(unsigned int gic_nr)
         gic_cpu_init(&gic_data[gic_nr]);
 }
 
-void __cpuinit gic_enable_ppi(unsigned int irq)
-{
-        unsigned long flags;
-
-        local_irq_save(flags);
-        irq_set_status_flags(irq, IRQ_NOPROBE);
-        gic_unmask_irq(irq_get_irq_data(irq));
-        local_irq_restore(flags);
-}
-
 #ifdef CONFIG_SMP
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 28b7ee8d7398..cb3b7c981c4b 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -205,6 +205,13 @@ extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *,
 int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
                 void *, dma_addr_t, size_t);
 
+/*
+ * This can be called during boot to increase the size of the consistent
+ * DMA region above it's default value of 2MB. It must be called before the
+ * memory allocator is initialised, i.e. before any core_initcall.
+ */
+extern void __init init_consistent_dma_size(unsigned long size);
+
 
 #ifdef CONFIG_DMABOUNCE
 /*
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
index 2f1e2098dfe7..88d61815f0c0 100644
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ b/arch/arm/include/asm/entry-macro-multi.S
@@ -25,13 +25,6 @@
         movne   r1, sp
         adrne   lr, BSYM(1b)
         bne     do_IPI
-
-#ifdef CONFIG_LOCAL_TIMERS
-        test_for_ltirq r0, r2, r6, lr
-        movne   r0, sp
-        adrne   lr, BSYM(1b)
-        bne     do_local_timer
-#endif
 #endif
 9997:
         .endm
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 89ad1805e579..ddf07a92a6c8 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -9,9 +9,6 @@
 
 typedef struct {
         unsigned int __softirq_pending;
-#ifdef CONFIG_LOCAL_TIMERS
-        unsigned int local_timer_irqs;
-#endif
 #ifdef CONFIG_SMP
         unsigned int ipi_irqs[NR_IPI];
 #endif
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
index c115b82fe80a..74ebc803904d 100644
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ b/arch/arm/include/asm/hardware/entry-macro-gic.S
@@ -22,15 +22,11 @@
  * interrupt controller spec.  To wit:
  *
  * Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local.  We allow 30 to be used for the watchdog.
+ * 16-31 are local.  We allow 30 to be used for the watchdog.
  * 32-1020 are global
  * 1021-1022 are reserved
  * 1023 is "spurious" (no interrupt)
  *
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
- *
  * A simple read from the controller will tell us the number of the highest
  * priority enabled interrupt.  We then just need to check whether it is in the
  * valid range for an IRQ (30-1020 inclusive).
@@ -43,7 +39,7 @@
 
         ldr     \tmp, =1021
         bic     \irqnr, \irqstat, #0x1c00
-        cmp     \irqnr, #29
+        cmp     \irqnr, #15
         cmpcc   \irqnr, \irqnr
         cmpne   \irqnr, \tmp
         cmpcs   \irqnr, \irqnr
@@ -62,14 +58,3 @@
         strcc   \irqstat, [\base, #GIC_CPU_EOI]
         cmpcs   \irqnr, \irqnr
         .endm
-
-/* As above, this assumes that irqstat and base are preserved.. */
-
-        .macro test_for_ltirq, irqnr, irqstat, base, tmp
-        bic     \irqnr, \irqstat, #0x1c00
-        mov     \tmp, #0
-        cmp     \irqnr, #29
-        moveq   \tmp, #1
-        streq   \irqstat, [\base, #GIC_CPU_EOI]
-        cmp     \tmp, #0
-        .endm
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 435d3f86c708..14867e12f205 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -40,12 +40,19 @@ void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
 void gic_secondary_init(unsigned int);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-void gic_enable_ppi(unsigned int);
 
 struct gic_chip_data {
         unsigned int irq_offset;
         void __iomem *dist_base;
         void __iomem *cpu_base;
+#ifdef CONFIG_CPU_PM
+        u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+        u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+        u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+        u32 __percpu *saved_ppi_enable;
+        u32 __percpu *saved_ppi_conf;
+#endif
+        unsigned int gic_irqs;
 };
 #endif
 
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index f389b2704d82..c190bc992f0e 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -50,6 +50,7 @@ static inline void decode_ctrl_reg(u32 reg,
 #define ARM_DEBUG_ARCH_V6_1     2
 #define ARM_DEBUG_ARCH_V7_ECP14 3
 #define ARM_DEBUG_ARCH_V7_MM    4
+#define ARM_DEBUG_ARCH_V7_1     5
 
 /* Breakpoint */
 #define ARM_BREAKPOINT_EXECUTE  0
@@ -57,6 +58,7 @@ static inline void decode_ctrl_reg(u32 reg,
 /* Watchpoints */
 #define ARM_BREAKPOINT_LOAD     1
 #define ARM_BREAKPOINT_STORE    2
+#define ARM_FSR_ACCESS_MASK     (1 << 11)
 
 /* Privilege Levels */
 #define ARM_BREAKPOINT_PRIV     1
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index 6fd955d34c65..c6a18424888e 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -11,6 +11,7 @@
 #define __ASM_ARM_LOCALTIMER_H
 
 #include <linux/errno.h>
+#include <linux/interrupt.h>
 
 struct clock_event_device;
 
@@ -19,31 +20,20 @@ struct clock_event_device;
  */
 void percpu_timer_setup(void);
 
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
-/*
- * Called from C code
- */
-void handle_local_timer(struct pt_regs *);
-
 #ifdef CONFIG_LOCAL_TIMERS
 
 #ifdef CONFIG_HAVE_ARM_TWD
 
 #include "smp_twd.h"
 
-#define local_timer_ack()       twd_timer_ack()
+#define local_timer_stop(c)     twd_timer_stop((c))
 
 #else
 
 /*
- * Platform provides this to acknowledge a local timer IRQ.
- * Returns true if the local timer IRQ is to be processed.
+ * Stop the local timer
  */
-int local_timer_ack(void);
+void local_timer_stop(struct clock_event_device *);
 
 #endif
 
@@ -58,6 +48,10 @@ static inline int local_timer_setup(struct clock_event_device *evt)
 {
         return -ENXIO;
 }
+
+static inline void local_timer_stop(struct clock_event_device *evt)
+{
+}
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index c5699987fa98..7d19425dd496 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -17,7 +17,7 @@ struct sys_timer;
 struct machine_desc {
         unsigned int            nr;             /* architecture number  */
         const char              *name;          /* architecture name    */
-        unsigned long           boot_params;    /* tagged list          */
+        unsigned long           atag_offset;    /* tagged list (relative) */
         const char              **dt_compat;    /* array of device tree
                                                  * 'compatible' strings */
 
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index d2fedb5aeb1f..b36f3654bf54 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -29,6 +29,7 @@ struct map_desc {
 #define MT_MEMORY_NONCACHED     11
 #define MT_MEMORY_DTCM          12
 #define MT_MEMORY_ITCM          13
+#define MT_MEMORY_SO            14
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 441fc4fe8263..a8997d71084e 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -16,9 +16,12 @@
 #include <linux/compiler.h>
 #include <linux/const.h>
 #include <linux/types.h>
-#include <mach/memory.h>
 #include <asm/sizes.h>
 
+#ifdef CONFIG_NEED_MACH_MEMORY_H
+#include <mach/memory.h>
+#endif
+
 /*
  * Allow for constants defined here to be used from assembly code
  * by prepending the UL suffix only with actual C code compilation.
@@ -77,16 +80,7 @@
  */
 #define IOREMAP_MAX_ORDER       24
 
-/*
- * Size of DMA-consistent memory region.  Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE     SZ_2M
-#endif
-
 #define CONSISTENT_END          (0xffe00000UL)
-#define CONSISTENT_BASE         (CONSISTENT_END - CONSISTENT_DMA_SIZE)
 
 #else /* CONFIG_MMU */
 
@@ -193,7 +187,11 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #endif
 
 #ifndef PHYS_OFFSET
+#ifdef PLAT_PHYS_OFFSET
 #define PHYS_OFFSET     PLAT_PHYS_OFFSET
+#else
+#define PHYS_OFFSET     UL(CONFIG_PHYS_OFFSET)
+#endif
 #endif
 
 /*
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 8ade1840c6f2..9451dce3a553 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -101,6 +101,9 @@ extern pgprot_t		pgprot_kernel;
 #define pgprot_writecombine(prot) \
         __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
 
+#define pgprot_stronglyordered(prot) \
+        __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+
 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 #define pgprot_dmacoherent(prot) \
         __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index b7e82c4aced6..71d99b83cdb9 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -13,7 +13,12 @@
 #define __ARM_PMU_H__
 
 #include <linux/interrupt.h>
+#include <linux/perf_event.h>
 
+/*
+ * Types of PMUs that can be accessed directly and require mutual
+ * exclusion between profiling tools.
+ */
 enum arm_pmu_type {
         ARM_PMU_DEVICE_CPU      = 0,
         ARM_NUM_PMU_DEVICES,
@@ -37,21 +42,17 @@ struct arm_pmu_platdata {
  * reserve_pmu() - reserve the hardware performance counters
  *
  * Reserve the hardware performance counters in the system for exclusive use.
- * The platform_device for the system is returned on success, ERR_PTR()
- * encoded error on failure.
+ * Returns 0 on success or -EBUSY if the lock is already held.
  */
-extern struct platform_device *
+extern int
 reserve_pmu(enum arm_pmu_type type);
 
 /**
  * release_pmu() - Relinquish control of the performance counters
  *
  * Release the performance counters and allow someone else to use them.
- * Callers must have disabled the counters and released IRQs before calling
- * this. The platform_device returned from reserve_pmu() must be passed as
- * a cookie.
  */
-extern int
+extern void
 release_pmu(enum arm_pmu_type type);
 
 /**
@@ -68,24 +69,78 @@ init_pmu(enum arm_pmu_type type);
 
 #include <linux/err.h>
 
-static inline struct platform_device *
-reserve_pmu(enum arm_pmu_type type)
-{
-        return ERR_PTR(-ENODEV);
-}
-
 static inline int
-release_pmu(enum arm_pmu_type type)
+reserve_pmu(enum arm_pmu_type type)
 {
         return -ENODEV;
 }
 
-static inline int
-init_pmu(enum arm_pmu_type type)
-{
-        return -ENODEV;
-}
+static inline void
+release_pmu(enum arm_pmu_type type)     { }
 
 #endif /* CONFIG_CPU_HAS_PMU */
 
+#ifdef CONFIG_HW_PERF_EVENTS
+
+/* The events for a given PMU register set. */
+struct pmu_hw_events {
+        /*
+         * The events that are active on the PMU for the given index.
+         */
+        struct perf_event       **events;
+
+        /*
+         * A 1 bit for an index indicates that the counter is being used for
+         * an event. A 0 means that the counter can be used.
+         */
+        unsigned long           *used_mask;
+
+        /*
+         * Hardware lock to serialize accesses to PMU registers. Needed for the
+         * read/modify/write sequences.
+         */
+        raw_spinlock_t          pmu_lock;
+};
+
+struct arm_pmu {
+        struct pmu      pmu;
+        enum arm_perf_pmu_ids id;
+        enum arm_pmu_type type;
+        cpumask_t       active_irqs;
+        const char      *name;
+        irqreturn_t     (*handle_irq)(int irq_num, void *dev);
+        void            (*enable)(struct hw_perf_event *evt, int idx);
+        void            (*disable)(struct hw_perf_event *evt, int idx);
+        int             (*get_event_idx)(struct pmu_hw_events *hw_events,
+                                         struct hw_perf_event *hwc);
+        int             (*set_event_filter)(struct hw_perf_event *evt,
+                                            struct perf_event_attr *attr);
+        u32             (*read_counter)(int idx);
+        void            (*write_counter)(int idx, u32 val);
+        void            (*start)(void);
+        void            (*stop)(void);
+        void            (*reset)(void *);
+        int             (*map_event)(struct perf_event *event);
+        int             num_events;
+        atomic_t        active_events;
+        struct mutex    reserve_mutex;
+        u64             max_period;
+        struct platform_device  *plat_device;
+        struct pmu_hw_events    *(*get_hw_events)(void);
+};
+
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
+
+u64 armpmu_event_update(struct perf_event *event,
+                        struct hw_perf_event *hwc,
+                        int idx, int overflow);
+
+int armpmu_event_set_period(struct perf_event *event,
+                            struct hw_perf_event *hwc,
+                            int idx);
+
+#endif /* CONFIG_HW_PERF_EVENTS */
+
 #endif /* __ARM_PMU_H__ */
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 633d1cb84d87..9e92cb205e65 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -81,6 +81,10 @@ extern void cpu_dcache_clean_area(void *, int);
 extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
 extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
 extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
+
+/* These three are private to arch/arm/kernel/suspend.c */
+extern void cpu_do_suspend(void *);
+extern void cpu_do_resume(void *);
 #else
 #define cpu_proc_init                   processor._proc_init
 #define cpu_proc_fin                    processor._proc_fin
@@ -89,6 +93,10 @@ extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
 #define cpu_dcache_clean_area           processor.dcache_clean_area
 #define cpu_set_pte_ext                 processor.set_pte_ext
 #define cpu_do_switch_mm                processor.switch_mm
+
+/* These three are private to arch/arm/kernel/suspend.c */
+#define cpu_do_suspend                  processor.do_suspend
+#define cpu_do_resume                   processor.do_resume
 #endif
 
 extern void cpu_resume(void);
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 0a17b62538c2..1e5717afc4ac 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -99,9 +99,4 @@ extern void platform_cpu_enable(unsigned int cpu);
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
-/*
- * show local interrupt info
- */
-extern void show_local_irqs(struct seq_file *, int);
-
 #endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index fed9981fba08..ef9ffba97ad8 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -22,7 +22,7 @@ struct clock_event_device;
 
 extern void __iomem *twd_base;
 
-int twd_timer_ack(void);
 void twd_timer_setup(struct clock_event_device *);
+void twd_timer_stop(struct clock_event_device *);
 
 #endif
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
index b0e4e1a02318..1c0a551ae375 100644
--- a/arch/arm/include/asm/suspend.h
+++ b/arch/arm/include/asm/suspend.h
@@ -1,22 +1,7 @@
 #ifndef __ASM_ARM_SUSPEND_H
 #define __ASM_ARM_SUSPEND_H
 
-#include <asm/memory.h>
-#include <asm/tlbflush.h>
-
 extern void cpu_resume(void);
-
-/*
- * Hide the first two arguments to __cpu_suspend - these are an implementation
- * detail which platform code shouldn't have to know about.
- */
-static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
-{
-        extern int __cpu_suspend(int, long, unsigned long,
-                                 int (*)(unsigned long));
-        int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn);
-        flush_tlb_all();
-        return ret;
-}
+extern int cpu_suspend(unsigned long, int (*)(unsigned long));
 
 #endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 68036eece340..16eed6aebfa4 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)            += arthur.o
 obj-$(CONFIG_ISA_DMA)           += dma-isa.o
 obj-$(CONFIG_PCI)               += bios32.o isa.o
-obj-$(CONFIG_ARM_CPU_SUSPEND)   += sleep.o
+obj-$(CONFIG_ARM_CPU_SUSPEND)   += sleep.o suspend.o
 obj-$(CONFIG_HAVE_SCHED_CLOCK)  += sched_clock.o
 obj-$(CONFIG_SMP)               += smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)      += smp_scu.o
@@ -43,6 +43,13 @@ obj-$(CONFIG_KPROBES)		+= kprobes-thumb.o
 else
 obj-$(CONFIG_KPROBES)           += kprobes-arm.o
 endif
+obj-$(CONFIG_ARM_KPROBES_TEST)  += test-kprobes.o
+test-kprobes-objs               := kprobes-test.o
+ifdef CONFIG_THUMB2_KERNEL
+test-kprobes-objs               += kprobes-test-thumb.o
+else
+test-kprobes-objs               += kprobes-test-arm.o
+endif
 obj-$(CONFIG_ATAGS_PROC)        += atags.o
 obj-$(CONFIG_OABI_COMPAT)       += sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)       += thumbee.o
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 0f852d082fcf..204e2160cfcc 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,7 +22,7 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
                 @@ debug using ARM EmbeddedICE DCC channel
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 .endm
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
@@ -106,7 +106,7 @@
 
 #ifdef CONFIG_MMU
                 .macro  addruart_current, rx, tmp1, tmp2
-                addruart        \tmp1, \tmp2
+                addruart        \tmp1, \tmp2, \rx
                 mrc             p15, 0, \rx, c1, c0
                 tst             \rx, #1
                 moveq           \rx, \tmp1
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 239703dbdf4f..566c54c2a1fe 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -99,7 +99,7 @@ ENTRY(stext)
         sub     r4, r3, r4                      @ (PHYS_OFFSET - PAGE_OFFSET)
         add     r8, r8, r4                      @ PHYS_OFFSET
 #else
-        ldr     r8, =PLAT_PHYS_OFFSET
+        ldr     r8, =PHYS_OFFSET                @ always constant in this case
 #endif
 
         /*
@@ -238,7 +238,7 @@ __create_page_tables:
          * This allows debug messages to be output
          * via a serial console before paging_init.
          */
-        addruart r7, r3
+        addruart r7, r3, r0
 
         mov     r3, r3, lsr #SECTION_SHIFT
         mov     r3, r3, lsl #PMD_ORDER
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index a927ca1f5566..814a52a9dc39 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -45,7 +45,6 @@ static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]);
 
 /* Number of BRP/WRP registers on this CPU. */
 static int core_num_brps;
-static int core_num_reserved_brps;
 static int core_num_wrps;
 
 /* Debug architecture version. */
@@ -137,10 +136,11 @@ static u8 get_debug_arch(void)
         u32 didr;
 
         /* Do we implement the extended CPUID interface? */
-        if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf),
-            "CPUID feature registers not supported. "
-            "Assuming v6 debug is present.\n"))
+        if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+                pr_warning("CPUID feature registers not supported. "
+                           "Assuming v6 debug is present.\n");
                 return ARM_DEBUG_ARCH_V6;
+        }
 
         ARM_DBG_READ(c0, 0, didr);
         return (didr >> 16) & 0xf;
@@ -154,10 +154,21 @@ u8 arch_get_debug_arch(void)
 static int debug_arch_supported(void)
 {
         u8 arch = get_debug_arch();
-        return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14;
+
+        /* We don't support the memory-mapped interface. */
+        return (arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14) ||
+                arch >= ARM_DEBUG_ARCH_V7_1;
+}
+
+/* Determine number of WRP registers available. */
+static int get_num_wrp_resources(void)
+{
+        u32 didr;
+        ARM_DBG_READ(c0, 0, didr);
+        return ((didr >> 28) & 0xf) + 1;
 }
 
-/* Determine number of BRP register available. */
+/* Determine number of BRP registers available. */
 static int get_num_brp_resources(void)
 {
         u32 didr;
@@ -176,9 +187,10 @@ static int core_has_mismatch_brps(void)
 static int get_num_wrps(void)
 {
         /*
-         * FIXME: When a watchpoint fires, the only way to work out which
-         * watchpoint it was is by disassembling the faulting instruction
-         * and working out the address of the memory access.
+         * On debug architectures prior to 7.1, when a watchpoint fires, the
+         * only way to work out which watchpoint it was is by disassembling
+         * the faulting instruction and working out the address of the memory
+         * access.
          *
          * Furthermore, we can only do this if the watchpoint was precise
          * since imprecise watchpoints prevent us from calculating register
@@ -192,36 +204,17 @@ static int get_num_wrps(void)
          * [the ARM ARM states that the DFAR is UNKNOWN, but experience shows
          * that it is set on some implementations].
          */
+        if (get_debug_arch() < ARM_DEBUG_ARCH_V7_1)
+                return 1;
 
-#if 0
-        int wrps;
-        u32 didr;
-        ARM_DBG_READ(c0, 0, didr);
-        wrps = ((didr >> 28) & 0xf) + 1;
-#endif
-        int wrps = 1;
-
-        if (core_has_mismatch_brps() && wrps >= get_num_brp_resources())
-                wrps = get_num_brp_resources() - 1;
-
-        return wrps;
-}
-
-/* We reserve one breakpoint for each watchpoint. */
-static int get_num_reserved_brps(void)
-{
-        if (core_has_mismatch_brps())
-                return get_num_wrps();
-        return 0;
+        return get_num_wrp_resources();
 }
 
 /* Determine number of usable BRPs available. */
 static int get_num_brps(void)
 {
         int brps = get_num_brp_resources();
-        if (core_has_mismatch_brps())
-                brps -= get_num_reserved_brps();
-        return brps;
+        return core_has_mismatch_brps() ? brps - 1 : brps;
 }
 
 /*
@@ -239,7 +232,7 @@ static int enable_monitor_mode(void)
 
         /* Ensure that halting mode is disabled. */
         if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN,
-                        "halting debug mode enabled. Unable to access hardware resources.\n")) {
+                "halting debug mode enabled. Unable to access hardware resources.\n")) {
                 ret = -EPERM;
                 goto out;
         }
@@ -255,6 +248,7 @@ static int enable_monitor_mode(void)
                 ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
                 break;
         case ARM_DEBUG_ARCH_V7_ECP14:
+        case ARM_DEBUG_ARCH_V7_1:
                 ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN));
                 break;
         default:
@@ -346,24 +340,10 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
                 val_base = ARM_BASE_BVR;
                 slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
                 max_slots = core_num_brps;
-                if (info->step_ctrl.enabled) {
-                        /* Override the breakpoint data with the step data. */
-                        addr = info->trigger & ~0x3;
-                        ctrl = encode_ctrl_reg(info->step_ctrl);
-                }
         } else {
                 /* Watchpoint */
-                if (info->step_ctrl.enabled) {
-                        /* Install into the reserved breakpoint region. */
-                        ctrl_base = ARM_BASE_BCR + core_num_brps;
-                        val_base = ARM_BASE_BVR + core_num_brps;
-                        /* Override the watchpoint data with the step data. */
-                        addr = info->trigger & ~0x3;
-                        ctrl = encode_ctrl_reg(info->step_ctrl);
-                } else {
-                        ctrl_base = ARM_BASE_WCR;
-                        val_base = ARM_BASE_WVR;
-                }
+                ctrl_base = ARM_BASE_WCR;
+                val_base = ARM_BASE_WVR;
                 slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
                 max_slots = core_num_wrps;
         }
@@ -382,6 +362,17 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
                 goto out;
         }
 
+        /* Override the breakpoint data with the step data. */
+        if (info->step_ctrl.enabled) {
+                addr = info->trigger & ~0x3;
+                ctrl = encode_ctrl_reg(info->step_ctrl);
+                if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE) {
+                        i = 0;
+                        ctrl_base = ARM_BASE_BCR + core_num_brps;
+                        val_base = ARM_BASE_BVR + core_num_brps;
+                }
+        }
+
         /* Setup the address register. */
         write_wb_reg(val_base + i, addr);
 
@@ -405,10 +396,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
                 max_slots = core_num_brps;
         } else {
                 /* Watchpoint */
-                if (info->step_ctrl.enabled)
-                        base = ARM_BASE_BCR + core_num_brps;
-                else
-                        base = ARM_BASE_WCR;
+                base = ARM_BASE_WCR;
                 slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
                 max_slots = core_num_wrps;
         }
@@ -426,6 +414,13 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
         if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n"))
                 return;
 
+        /* Ensure that we disable the mismatch breakpoint. */
+        if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE &&
+            info->step_ctrl.enabled) {
+                i = 0;
+                base = ARM_BASE_BCR + core_num_brps;
+        }
+
         /* Reset the control register. */
         write_wb_reg(base + i, 0);
 }
@@ -632,10 +627,9 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
          * we can use the mismatch feature as a poor-man's hardware
          * single-step, but this only works for per-task breakpoints.
          */
-        if (WARN_ONCE(!bp->overflow_handler &&
-                (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps()
-                 || !bp->hw.bp_target),
-                        "overflow handler required but none found\n")) {
+        if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
+            !core_has_mismatch_brps() || !bp->hw.bp_target)) {
+                pr_warning("overflow handler required but none found\n");
                 ret = -EINVAL;
         }
 out:
@@ -666,34 +660,62 @@ static void disable_single_step(struct perf_event *bp)
         arch_install_hw_breakpoint(bp);
 }
 
-static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
+static void watchpoint_handler(unsigned long addr, unsigned int fsr,
+                               struct pt_regs *regs)
 {
-        int i;
+        int i, access;
+        u32 val, ctrl_reg, alignment_mask;
         struct perf_event *wp, **slots;
         struct arch_hw_breakpoint *info;
+        struct arch_hw_breakpoint_ctrl ctrl;
 
         slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
 
-        /* Without a disassembler, we can only handle 1 watchpoint. */
-        BUG_ON(core_num_wrps > 1);
-
         for (i = 0; i < core_num_wrps; ++i) {
                 rcu_read_lock();
 
                 wp = slots[i];
 
-                if (wp == NULL) {
-                        rcu_read_unlock();
-                        continue;
-                }
+                if (wp == NULL)
+                        goto unlock;
 
+                info = counter_arch_bp(wp);
                 /*
-                 * The DFAR is an unknown value. Since we only allow a
-                 * single watchpoint, we can set the trigger to the lowest
-                 * possible faulting address.
+                 * The DFAR is an unknown value on debug architectures prior
+                 * to 7.1. Since we only allow a single watchpoint on these
+                 * older CPUs, we can set the trigger to the lowest possible
+                 * faulting address.
                  */
-                info = counter_arch_bp(wp);
-                info->trigger = wp->attr.bp_addr;
+                if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
+                        BUG_ON(i > 0);
+                        info->trigger = wp->attr.bp_addr;
+                } else {
+                        if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
+                                alignment_mask = 0x7;
+                        else
+                                alignment_mask = 0x3;
+
+                        /* Check if the watchpoint value matches. */
+                        val = read_wb_reg(ARM_BASE_WVR + i);
+                        if (val != (addr & ~alignment_mask))
+                                goto unlock;
+
+                        /* Possible match, check the byte address select. */
+                        ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+                        decode_ctrl_reg(ctrl_reg, &ctrl);
+                        if (!((1 << (addr & alignment_mask)) & ctrl.len))
+                                goto unlock;
+
+                        /* Check that the access type matches. */
+                        access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
+                                 HW_BREAKPOINT_R;
+                        if (!(access & hw_breakpoint_type(wp)))
+                                goto unlock;
+
+                        /* We have a winner. */
+                        info->trigger = addr;
+                }
+
                 pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
                 perf_bp_event(wp, regs);
 
@@ -705,6 +727,7 @@ static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
                 if (!wp->overflow_handler)
                         enable_single_step(wp, instruction_pointer(regs));
 
+unlock:
                 rcu_read_unlock();
         }
 }
@@ -717,7 +740,7 @@ static void watchpoint_single_step_handler(unsigned long pc)
 
         slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
 
-        for (i = 0; i < core_num_reserved_brps; ++i) {
+        for (i = 0; i < core_num_wrps; ++i) {
                 rcu_read_lock();
 
                 wp = slots[i];
@@ -820,7 +843,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
         case ARM_ENTRY_ASYNC_WATCHPOINT:
                 WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
         case ARM_ENTRY_SYNC_WATCHPOINT:
-                watchpoint_handler(addr, regs);
+                watchpoint_handler(addr, fsr, regs);
                 break;
         default:
                 ret = 1; /* Unhandled fault. */
@@ -834,11 +857,31 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 /*
  * One-time initialisation.
  */
-static void reset_ctrl_regs(void *info)
+static cpumask_t debug_err_mask;
+
+static int debug_reg_trap(struct pt_regs *regs, unsigned int instr)
 {
-        int i, cpu = smp_processor_id();
+        int cpu = smp_processor_id();
+
+        pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n",
+                   instr, cpu);
+
+        /* Set the error flag for this CPU and skip the faulting instruction. */
+        cpumask_set_cpu(cpu, &debug_err_mask);
+        instruction_pointer(regs) += 4;
+        return 0;
+}
+
+static struct undef_hook debug_reg_hook = {
+        .instr_mask     = 0x0fe80f10,
+        .instr_val      = 0x0e000e10,
+        .fn             = debug_reg_trap,
+};
+
+static void reset_ctrl_regs(void *unused)
+{
+        int i, raw_num_brps, err = 0, cpu = smp_processor_id();
         u32 dbg_power;
-        cpumask_t *cpumask = info;
 
         /*
          * v7 debug contains save and restore registers so that debug state
@@ -848,38 +891,57 @@ static void reset_ctrl_regs(void *info)
          * Access Register to avoid taking undefined instruction exceptions
          * later on.
          */
-        if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
+        switch (debug_arch) {
+        case ARM_DEBUG_ARCH_V6:
+        case ARM_DEBUG_ARCH_V6_1:
+                /* ARMv6 cores just need to reset the registers. */
+                goto reset_regs;
+        case ARM_DEBUG_ARCH_V7_ECP14:
                 /*
                  * Ensure sticky power-down is clear (i.e. debug logic is
                  * powered up).
                  */
                 asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
-                if ((dbg_power & 0x1) == 0) {
-                        pr_warning("CPU %d debug is powered down!\n", cpu);
-                        cpumask_or(cpumask, cpumask, cpumask_of(cpu));
-                        return;
-                }
-
+                if ((dbg_power & 0x1) == 0)
+                        err = -EPERM;
+                break;
+        case ARM_DEBUG_ARCH_V7_1:
                 /*
-                 * Unconditionally clear the lock by writing a value
-                 * other than 0xC5ACCE55 to the access register.
+                 * Ensure the OS double lock is clear.
                  */
-                asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
-                isb();
+                asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power));
+                if ((dbg_power & 0x1) == 1)
+                        err = -EPERM;
+                break;
+        }
 
-                /*
-                 * Clear any configured vector-catch events before
-                 * enabling monitor mode.
-                 */
-                asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
-                isb();
+        if (err) {
+                pr_warning("CPU %d debug is powered down!\n", cpu);
+                cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
+                return;
         }
 
+        /*
+         * Unconditionally clear the lock by writing a value
+         * other than 0xC5ACCE55 to the access register.
+         */
+        asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
+        isb();
+
+        /*
+         * Clear any configured vector-catch events before
+         * enabling monitor mode.
+         */
+        asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
+        isb();
+
+reset_regs:
         if (enable_monitor_mode())
                 return;
 
         /* We must also reset any reserved registers. */
-        for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) {
+        raw_num_brps = get_num_brp_resources();
+        for (i = 0; i < raw_num_brps; ++i) {
                 write_wb_reg(ARM_BASE_BCR + i, 0UL);
                 write_wb_reg(ARM_BASE_BVR + i, 0UL);
         }
@@ -895,6 +957,7 @@ static int __cpuinit dbg_reset_notify(struct notifier_block *self,
 {
         if (action == CPU_ONLINE)
                 smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
+
         return NOTIFY_OK;
 }
 
@@ -905,7 +968,6 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = {
 static int __init arch_hw_breakpoint_init(void)
 {
         u32 dscr;
-        cpumask_t cpumask = { CPU_BITS_NONE };
 
         debug_arch = get_debug_arch();
 
@@ -916,28 +978,31 @@ static int __init arch_hw_breakpoint_init(void)
 
         /* Determine how many BRPs/WRPs are available. */
         core_num_brps = get_num_brps();
-        core_num_reserved_brps = get_num_reserved_brps();
         core_num_wrps = get_num_wrps();
 
-        pr_info("found %d breakpoint and %d watchpoint registers.\n",
-                core_num_brps + core_num_reserved_brps, core_num_wrps);
-
-        if (core_num_reserved_brps)
-                pr_info("%d breakpoint(s) reserved for watchpoint "
-                                "single-step.\n", core_num_reserved_brps);
+        /*
+         * We need to tread carefully here because DBGSWENABLE may be
+         * driven low on this core and there isn't an architected way to
+         * determine that.
+         */
+        register_undef_hook(&debug_reg_hook);
 
         /*
          * Reset the breakpoint resources. We assume that a halting
          * debugger will leave the world in a nice state for us.
          */
-        on_each_cpu(reset_ctrl_regs, &cpumask, 1);
-        if (!cpumask_empty(&cpumask)) {
+        on_each_cpu(reset_ctrl_regs, NULL, 1);
+        unregister_undef_hook(&debug_reg_hook);
+        if (!cpumask_empty(&debug_err_mask)) {
                 core_num_brps = 0;
-                core_num_reserved_brps = 0;
                 core_num_wrps = 0;
                 return 0;
         }
 
+        pr_info("found %d " "%s" "breakpoint and %d watchpoint registers.\n",
+                core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " :
+                "", core_num_wrps);
+
         ARM_DBG_READ(c1, 0, dscr);
         if (dscr & ARM_DSCR_HDBGEN) {
                 max_watchpoint_len = 4;
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 53919b230e8b..7cb29261249a 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -59,9 +59,6 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 #ifdef CONFIG_SMP
         show_ipi_list(p, prec);
 #endif
-#ifdef CONFIG_LOCAL_TIMERS
-        show_local_irqs(p, prec);
-#endif
         seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
         return 0;
 }
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 79203ee1d039..9fe8910308af 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -60,6 +60,7 @@
 
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
+#include <linux/module.h>
 
 #include "kprobes.h"
 
@@ -971,6 +972,9 @@ const union decode_item kprobe_decode_arm_table[] = {
 
         DECODE_END
 };
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_arm_table);
+#endif
 
 static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs)
 {
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
new file mode 100644
index 000000000000..fc82de8bdcce
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -0,0 +1,1323 @@
+/*
+ * arch/arm/kernel/kprobes-test-arm.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "32"
+
+#define TEST_ARM_TO_THUMB_INTERWORK_R(code1, reg, val, code2)   \
+        TESTCASE_START(code1 #reg code2)                        \
+        TEST_ARG_REG(reg, val)                                  \
+        TEST_ARG_REG(14, 99f)                                   \
+        TEST_ARG_END("")                                        \
+        "50:    nop                     \n\t"                   \
+        "1:     "code1 #reg code2"      \n\t"                   \
+        "       bx      lr              \n\t"                   \
+        ".thumb                         \n\t"                   \
+        "3:     adr     lr, 2f          \n\t"                   \
+        "       bx      lr              \n\t"                   \
+        ".arm                           \n\t"                   \
+        "2:     nop                     \n\t"                   \
+        TESTCASE_END
+
+#define TEST_ARM_TO_THUMB_INTERWORK_P(code1, reg, val, code2)   \
+        TESTCASE_START(code1 #reg code2)                        \
+        TEST_ARG_PTR(reg, val)                                  \
+        TEST_ARG_REG(14, 99f)                                   \
+        TEST_ARG_MEM(15, 3f+1)                                  \
+        TEST_ARG_END("")                                        \
+        "50:    nop                     \n\t"                   \
+        "1:     "code1 #reg code2"      \n\t"                   \
+        "       bx      lr              \n\t"                   \
+        ".thumb                         \n\t"                   \
+        "3:     adr     lr, 2f          \n\t"                   \
+        "       bx      lr              \n\t"                   \
+        ".arm                           \n\t"                   \
+        "2:     nop                     \n\t"                   \
+        TESTCASE_END
+
+
+void kprobe_arm_test_cases(void)
+{
+        kprobe_test_flags = 0;
+
+        TEST_GROUP("Data-processing (register), (register-shifted register), (immediate)")
+
+#define _DATA_PROCESSING_DNM(op,s,val)                                          \
+        TEST_RR(  op "eq" s "   r0,  r",1, VAL1,", r",2, val, "")               \
+        TEST_RR(  op "ne" s "   r1,  r",1, VAL1,", r",2, val, ", lsl #3")       \
+        TEST_RR(  op "cs" s "   r2,  r",3, VAL1,", r",2, val, ", lsr #4")       \
+        TEST_RR(  op "cc" s "   r3,  r",3, VAL1,", r",2, val, ", asr #5")       \
+        TEST_RR(  op "mi" s "   r4,  r",5, VAL1,", r",2, N(val),", asr #6")     \
+        TEST_RR(  op "pl" s "   r5,  r",5, VAL1,", r",2, val, ", ror #7")       \
+        TEST_RR(  op "vs" s "   r6,  r",7, VAL1,", r",2, val, ", rrx")          \
+        TEST_R(   op "vc" s "   r6,  r",7, VAL1,", pc, lsl #3")                 \
+        TEST_R(   op "vc" s "   r6,  r",7, VAL1,", sp, lsr #4")                 \
+        TEST_R(   op "vc" s "   r6,  pc, r",7, VAL1,", asr #5")                 \
+        TEST_R(   op "vc" s "   r6,  sp, r",7, VAL1,", ror #6")                 \
+        TEST_RRR( op "hi" s "   r8,  r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")\
+        TEST_RRR( op "ls" s "   r9,  r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")\
+        TEST_RRR( op "ge" s "   r10, r",11,VAL1,", r",14,val, ", asr r",7, 5,"")\
+        TEST_RRR( op "lt" s "   r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
+        TEST_RR(  op "gt" s "   r12, r13"       ", r",14,val, ", ror r",14,7,"")\
+        TEST_RR(  op "le" s "   r14, r",0, val, ", r13"       ", lsl r",14,8,"")\
+        TEST_RR(  op s "        r12, pc"        ", r",14,val, ", ror r",14,7,"")\
+        TEST_RR(  op s "        r14, r",0, val, ", pc"        ", lsl r",14,8,"")\
+        TEST_R(   op "eq" s "   r0,  r",11,VAL1,", #0xf5")                      \
+        TEST_R(   op "ne" s "   r11, r",0, VAL1,", #0xf5000000")                \
+        TEST_R(   op s "        r7,  r",8, VAL2,", #0x000af000")                \
+        TEST(     op s "        r4,  pc"        ", #0x00005a00")
+
+#define DATA_PROCESSING_DNM(op,val)             \
+        _DATA_PROCESSING_DNM(op,"",val)         \
+        _DATA_PROCESSING_DNM(op,"s",val)
+
+#define DATA_PROCESSING_NM(op,val)                                              \
+        TEST_RR(  op "ne        r",1, VAL1,", r",2, val, "")                    \
+        TEST_RR(  op "eq        r",1, VAL1,", r",2, val, ", lsl #3")            \
+        TEST_RR(  op "cc        r",3, VAL1,", r",2, val, ", lsr #4")            \
+        TEST_RR(  op "cs        r",3, VAL1,", r",2, val, ", asr #5")            \
+        TEST_RR(  op "pl        r",5, VAL1,", r",2, N(val),", asr #6")          \
+        TEST_RR(  op "mi        r",5, VAL1,", r",2, val, ", ror #7")            \
+        TEST_RR(  op "vc        r",7, VAL1,", r",2, val, ", rrx")               \
+        TEST_R (  op "vs        r",7, VAL1,", pc, lsl #3")                      \
+        TEST_R (  op "vs        r",7, VAL1,", sp, lsr #4")                      \
+        TEST_R(   op "vs        pc, r",7, VAL1,", asr #5")                      \
+        TEST_R(   op "vs        sp, r",7, VAL1,", ror #6")                      \
+        TEST_RRR( op "ls        r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")     \
+        TEST_RRR( op "hi        r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")     \
+        TEST_RRR( op "lt        r",11,VAL1,", r",14,val, ", asr r",7, 5,"")     \
+        TEST_RRR( op "ge        r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")   \
+        TEST_RR(  op "le        r13"       ", r",14,val, ", ror r",14,7,"")     \
+        TEST_RR(  op "gt        r",0, val, ", r13"       ", lsl r",14,8,"")     \
+        TEST_RR(  op "  pc"        ", r",14,val, ", ror r",14,7,"")             \
+        TEST_RR(  op "  r",0, val, ", pc"        ", lsl r",14,8,"")             \
+        TEST_R(   op "eq        r",11,VAL1,", #0xf5")                           \
+        TEST_R(   op "ne        r",0, VAL1,", #0xf5000000")                     \
+        TEST_R(   op "  r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING_DM(op,s,val)                                   \
+        TEST_R(   op "eq" s "   r0,  r",1, val, "")                     \
+        TEST_R(   op "ne" s "   r1,  r",1, val, ", lsl #3")             \
+        TEST_R(   op "cs" s "   r2,  r",3, val, ", lsr #4")             \
+        TEST_R(   op "cc" s "   r3,  r",3, val, ", asr #5")             \
+        TEST_R(   op "mi" s "   r4,  r",5, N(val),", asr #6")           \
+        TEST_R(   op "pl" s "   r5,  r",5, val, ", ror #7")             \
+        TEST_R(   op "vs" s "   r6,  r",10,val, ", rrx")                \
+        TEST(     op "vs" s "   r7,  pc, lsl #3")                       \
+        TEST(     op "vs" s "   r7,  sp, lsr #4")                       \
+        TEST_RR(  op "vc" s "   r8,  r",7, val, ", lsl r",0, 3,"")      \
+        TEST_RR(  op "hi" s "   r9,  r",9, val, ", lsr r",7, 4,"")      \
+        TEST_RR(  op "ls" s "   r10, r",9, val, ", asr r",7, 5,"")      \
+        TEST_RR(  op "ge" s "   r11, r",11,N(val),", asr r",7, 6,"")    \
+        TEST_RR(  op "lt" s "   r12, r",11,val, ", ror r",14,7,"")      \
+        TEST_R(   op "gt" s "   r14, r13"       ", lsl r",14,8,"")      \
+        TEST_R(   op "le" s "   r14, pc"        ", lsl r",14,8,"")      \
+        TEST(     op "eq" s "   r0,  #0xf5")                            \
+        TEST(     op "ne" s "   r11, #0xf5000000")                      \
+        TEST(     op s "        r7,  #0x000af000")                      \
+        TEST(     op s "        r4,  #0x00005a00")
+
+#define DATA_PROCESSING_DM(op,val)              \
+        _DATA_PROCESSING_DM(op,"",val)          \
+        _DATA_PROCESSING_DM(op,"s",val)
+
+        DATA_PROCESSING_DNM("and",0xf00f00ff)
+        DATA_PROCESSING_DNM("eor",0xf00f00ff)
+        DATA_PROCESSING_DNM("sub",VAL2)
+        DATA_PROCESSING_DNM("rsb",VAL2)
+        DATA_PROCESSING_DNM("add",VAL2)
+        DATA_PROCESSING_DNM("adc",VAL2)
+        DATA_PROCESSING_DNM("sbc",VAL2)
+        DATA_PROCESSING_DNM("rsc",VAL2)
+        DATA_PROCESSING_NM("tst",0xf00f00ff)
+        DATA_PROCESSING_NM("teq",0xf00f00ff)
+        DATA_PROCESSING_NM("cmp",VAL2)
+        DATA_PROCESSING_NM("cmn",VAL2)
+        DATA_PROCESSING_DNM("orr",0xf00f00ff)
+        DATA_PROCESSING_DM("mov",VAL2)
+        DATA_PROCESSING_DNM("bic",0xf00f00ff)
+        DATA_PROCESSING_DM("mvn",VAL2)
+
+        TEST("mov       ip, sp") /* This has special case emulation code */
+
+        TEST_SUPPORTED("mov     pc, #0x1000");
+        TEST_SUPPORTED("mov     sp, #0x1000");
+        TEST_SUPPORTED("cmp     pc, #0x1000");
+        TEST_SUPPORTED("cmp     sp, #0x1000");
+
+        /* Data-processing with PC as shift*/
+        TEST_UNSUPPORTED(".word 0xe15c0f1e      @ cmp   r12, r14, asl pc")
+        TEST_UNSUPPORTED(".word 0xe1a0cf1e      @ mov   r12, r14, asl pc")
+        TEST_UNSUPPORTED(".word 0xe08caf1e      @ add   r10, r12, r14, asl pc")
+
+        /* Data-processing with PC as shift*/
+        TEST_UNSUPPORTED("movs  pc, r1")
+        TEST_UNSUPPORTED("movs  pc, r1, lsl r2")
+        TEST_UNSUPPORTED("movs  pc, #0x10000")
+        TEST_UNSUPPORTED("adds  pc, lr, r1")
+        TEST_UNSUPPORTED("adds  pc, lr, r1, lsl r2")
+        TEST_UNSUPPORTED("adds  pc, lr, #4")
+
+        /* Data-processing with SP as target */
+        TEST("add       sp, sp, #16")
+        TEST("sub       sp, sp, #8")
+        TEST("bic       sp, sp, #0x20")
+        TEST("orr       sp, sp, #0x20")
+        TEST_PR( "add   sp, r",10,0,", r",11,4,"")
+        TEST_PRR("add   sp, r",10,0,", r",11,4,", asl r",12,1,"")
+        TEST_P(  "mov   sp, r",10,0,"")
+        TEST_PR( "mov   sp, r",10,0,", asl r",12,0,"")
+
+        /* Data-processing with PC as target */
+        TEST_BF(   "add pc, pc, #2f-1b-8")
+        TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"")
+        TEST_BF_R ("add pc, r",14,2f-1f-8,", pc")
+        TEST_BF_R ("mov pc, r",0,2f,"")
+        TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
+        TEST_BB(   "sub pc, pc, #1b-2b+8")
+#if __LINUX_ARM_ARCH__ >= 6
+        TEST_BB(   "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#endif
+        TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
+        TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
+        TEST_RR(   "add pc, pc, r",10,-2,", asl r",11,1,"")
+#ifdef CONFIG_THUMB2_KERNEL
+        TEST_ARM_TO_THUMB_INTERWORK_R("add      pc, pc, r",0,3f-1f-8+1,"")
+        TEST_ARM_TO_THUMB_INTERWORK_R("sub      pc, r",0,3f+8+1,", #8")
+#endif
+        TEST_GROUP("Miscellaneous instructions")
+
+        TEST("mrs       r0, cpsr")
+        TEST("mrspl     r7, cpsr")
+        TEST("mrs       r14, cpsr")
+        TEST_UNSUPPORTED(".word 0xe10ff000      @ mrs r15, cpsr")
+        TEST_UNSUPPORTED("mrs   r0, spsr")
+        TEST_UNSUPPORTED("mrs   lr, spsr")
+
+        TEST_UNSUPPORTED("msr   cpsr, r0")
+        TEST_UNSUPPORTED("msr   cpsr_f, lr")
+        TEST_UNSUPPORTED("msr   spsr, r0")
+
+        TEST_BF_R("bx   r",0,2f,"")
+        TEST_BB_R("bx   r",7,2f,"")
+        TEST_BF_R("bxeq r",14,2f,"")
+
+        TEST_R("clz     r0, r",0, 0x0,"")
+        TEST_R("clzeq   r7, r",14,0x1,"")
+        TEST_R("clz     lr, r",7, 0xffffffff,"")
+        TEST(  "clz     r4, sp")
+        TEST_UNSUPPORTED(".word 0x016fff10      @ clz pc, r0")
+        TEST_UNSUPPORTED(".word 0x016f0f1f      @ clz r0, pc")
+
+#if __LINUX_ARM_ARCH__ >= 6
+        TEST_UNSUPPORTED("bxj   r0")
+#endif
+
+        TEST_BF_R("blx  r",0,2f,"")
+        TEST_BB_R("blx  r",7,2f,"")
+        TEST_BF_R("blxeq        r",14,2f,"")
+        TEST_UNSUPPORTED(".word 0x0120003f      @ blx pc")
+
+        TEST_RR(   "qadd        r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(   "qaddvs      lr, r",9, VAL2,", r",8, VAL1,"")
+        TEST_R(    "qadd        lr, r",9, VAL2,", r13")
+        TEST_RR(   "qsub        r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(   "qsubvs      lr, r",9, VAL2,", r",8, VAL1,"")
+        TEST_R(    "qsub        lr, r",9, VAL2,", r13")
+        TEST_RR(   "qdadd       r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(   "qdaddvs     lr, r",9, VAL2,", r",8, VAL1,"")
+        TEST_R(    "qdadd       lr, r",9, VAL2,", r13")
+        TEST_RR(   "qdsub       r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(   "qdsubvs     lr, r",9, VAL2,", r",8, VAL1,"")
+        TEST_R(    "qdsub       lr, r",9, VAL2,", r13")
+        TEST_UNSUPPORTED(".word 0xe101f050      @ qadd pc, r0, r1")
+        TEST_UNSUPPORTED(".word 0xe121f050      @ qsub pc, r0, r1")
+        TEST_UNSUPPORTED(".word 0xe141f050      @ qdadd pc, r0, r1")
+        TEST_UNSUPPORTED(".word 0xe161f050      @ qdsub pc, r0, r1")
+        TEST_UNSUPPORTED(".word 0xe16f2050      @ qdsub r2, r0, pc")
+        TEST_UNSUPPORTED(".word 0xe161205f      @ qdsub r2, pc, r1")
+
+        TEST_UNSUPPORTED("bkpt  0xffff")
+        TEST_UNSUPPORTED("bkpt  0x0000")
+
+        TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0")
+
+        TEST_GROUP("Halfword multiply and multiply-accumulate")
+
+        TEST_RRR(    "smlabb    r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(    "smlabbge  r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(     "smlabb    lr, r",1, VAL2,", r",2, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe10f3281 @ smlabb pc, r1, r2, r3")
+        TEST_RRR(    "smlatb    r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(    "smlatbge  r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(     "smlatb    lr, r",1, VAL2,", r",2, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe10f32a1 @ smlatb pc, r1, r2, r3")
+        TEST_RRR(    "smlabt    r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(    "smlabtge  r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(     "smlabt    lr, r",1, VAL2,", r",2, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe10f32c1 @ smlabt pc, r1, r2, r3")
+        TEST_RRR(    "smlatt    r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(    "smlattge  r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(     "smlatt    lr, r",1, VAL2,", r",2, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe10f32e1 @ smlatt pc, r1, r2, r3")
+
+        TEST_RRR(    "smlawb    r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(    "smlawbge  r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(     "smlawb    lr, r",1, VAL2,", r",2, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe12f3281 @ smlawb pc, r1, r2, r3")
+        TEST_RRR(    "smlawt    r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(    "smlawtge  r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(     "smlawt    lr, r",1, VAL2,", r",2, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe12f32c1 @ smlawt pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe12032cf @ smlawt r0, pc, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe1203fc1 @ smlawt r0, r1, pc, r3")
+        TEST_UNSUPPORTED(".word 0xe120f2c1 @ smlawt r0, r1, r2, pc")
+
+        TEST_RR(    "smulwb     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smulwbge   r7, r",8, VAL3,", r",9, VAL1,"")
+        TEST_R(     "smulwb     lr, r",1, VAL2,", r13")
+        TEST_UNSUPPORTED(".word 0xe12f02a1 @ smulwb pc, r1, r2")
+        TEST_RR(    "smulwt     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smulwtge   r7, r",8, VAL3,", r",9, VAL1,"")
+        TEST_R(     "smulwt     lr, r",1, VAL2,", r13")
+        TEST_UNSUPPORTED(".word 0xe12f02e1 @ smulwt pc, r1, r2")
+
+        TEST_RRRR(  "smlalbb    r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR(  "smlalbble  r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRR(   "smlalbb    r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+        TEST_UNSUPPORTED(".word 0xe14f1382 @ smlalbb pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe141f382 @ smlalbb r1, pc, r2, r3")
+        TEST_RRRR(  "smlaltb    r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR(  "smlaltble  r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRR(   "smlaltb    r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+        TEST_UNSUPPORTED(".word 0xe14f13a2 @ smlaltb pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe141f3a2 @ smlaltb r1, pc, r2, r3")
+        TEST_RRRR(  "smlalbt    r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR(  "smlalbtle  r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRR(   "smlalbt    r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+        TEST_UNSUPPORTED(".word 0xe14f13c2 @ smlalbt pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe141f3c2 @ smlalbt r1, pc, r2, r3")
+        TEST_RRRR(  "smlaltt    r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR(  "smlalttle  r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRR(   "smlaltt    r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+        TEST_UNSUPPORTED(".word 0xe14f13e2 @ smlalbb pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe140f3e2 @ smlalbb r0, pc, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe14013ef @ smlalbb r0, r1, pc, r3")
+        TEST_UNSUPPORTED(".word 0xe1401fe2 @ smlalbb r0, r1, r2, pc")
+
+        TEST_RR(    "smulbb     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smulbbge   r7, r",8, VAL3,", r",9, VAL1,"")
+        TEST_R(     "smulbb     lr, r",1, VAL2,", r13")
+        TEST_UNSUPPORTED(".word 0xe16f0281 @ smulbb pc, r1, r2")
+        TEST_RR(    "smultb     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smultbge   r7, r",8, VAL3,", r",9, VAL1,"")
+        TEST_R(     "smultb     lr, r",1, VAL2,", r13")
+        TEST_UNSUPPORTED(".word 0xe16f02a1 @ smultb pc, r1, r2")
+        TEST_RR(    "smulbt     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smulbtge   r7, r",8, VAL3,", r",9, VAL1,"")
+        TEST_R(     "smulbt     lr, r",1, VAL2,", r13")
+        TEST_UNSUPPORTED(".word 0xe16f02c1 @ smultb pc, r1, r2")
+        TEST_RR(    "smultt     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smulttge   r7, r",8, VAL3,", r",9, VAL1,"")
+        TEST_R(     "smultt     lr, r",1, VAL2,", r13")
+        TEST_UNSUPPORTED(".word 0xe16f02e1 @ smultt pc, r1, r2")
+        TEST_UNSUPPORTED(".word 0xe16002ef @ smultt r0, pc, r2")
+        TEST_UNSUPPORTED(".word 0xe1600fe1 @ smultt r0, r1, pc")
+
+        TEST_GROUP("Multiply and multiply-accumulate")
+
+        TEST_RR(    "mul        r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "mulls      r7, r",8, VAL2,", r",9, VAL2,"")
+        TEST_R(     "mul        lr, r",4, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe00f0291 @ mul pc, r1, r2")
+        TEST_UNSUPPORTED(".word 0xe000029f @ mul r0, pc, r2")
+        TEST_UNSUPPORTED(".word 0xe0000f91 @ mul r0, r1, pc")
+        TEST_RR(    "muls       r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "mullss     r7, r",8, VAL2,", r",9, VAL2,"")
+        TEST_R(     "muls       lr, r",4, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe01f0291 @ muls pc, r1, r2")
+
+        TEST_RRR(    "mla       r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(    "mlahi     r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(     "mla       lr, r",1, VAL2,", r",2, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe02f3291 @ mla pc, r1, r2, r3")
+        TEST_RRR(    "mlas      r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(    "mlahis    r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(     "mlas      lr, r",1, VAL2,", r",2, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe03f3291 @ mlas pc, r1, r2, r3")
+
+#if __LINUX_ARM_ARCH__ >= 6
+        TEST_RR(  "umaal        r0, r1, r",2, VAL1,", r",3, VAL2,"")
+        TEST_RR(  "umaalls      r7, r8, r",9, VAL2,", r",10, VAL1,"")
+        TEST_R(   "umaal        lr, r12, r",11,VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe041f392 @ umaal pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
+        TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+
+        TEST_RRR(  "mls         r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(  "mlshi       r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(   "mls         lr, r",1, VAL2,", r",2, VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe06f3291 @ mls pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe060329f @ mls r0, pc, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe0603f91 @ mls r0, r1, pc, r3")
+        TEST_UNSUPPORTED(".word 0xe060f291 @ mls r0, r1, r2, pc")
+#endif
+
+        TEST_UNSUPPORTED(".word 0xe0700090 @ undef")
+        TEST_UNSUPPORTED(".word 0xe07fff9f @ undef")
+
+        TEST_RR(  "umull        r0, r1, r",2, VAL1,", r",3, VAL2,"")
+        TEST_RR(  "umullls      r7, r8, r",9, VAL2,", r",10, VAL1,"")
+        TEST_R(   "umull        lr, r12, r",11,VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe081f392 @ umull pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe08f1392 @ umull r1, pc, r2, r3")
+        TEST_RR(  "umulls       r0, r1, r",2, VAL1,", r",3, VAL2,"")
+        TEST_RR(  "umulllss     r7, r8, r",9, VAL2,", r",10, VAL1,"")
+        TEST_R(   "umulls       lr, r12, r",11,VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe091f392 @ umulls pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe09f1392 @ umulls r1, pc, r2, r3")
+
+        TEST_RRRR(  "umlal      r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR(  "umlalle    r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRR(   "umlal      r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+        TEST_UNSUPPORTED(".word 0xe0af1392 @ umlal pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe0a1f392 @ umlal r1, pc, r2, r3")
+        TEST_RRRR(  "umlals     r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR(  "umlalles   r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRR(   "umlals     r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+        TEST_UNSUPPORTED(".word 0xe0bf1392 @ umlals pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe0b1f392 @ umlals r1, pc, r2, r3")
+
+        TEST_RR(  "smull        r0, r1, r",2, VAL1,", r",3, VAL2,"")
+        TEST_RR(  "smullls      r7, r8, r",9, VAL2,", r",10, VAL1,"")
+        TEST_R(   "smull        lr, r12, r",11,VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe0c1f392 @ smull pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe0cf1392 @ smull r1, pc, r2, r3")
+        TEST_RR(  "smulls       r0, r1, r",2, VAL1,", r",3, VAL2,"")
+        TEST_RR(  "smulllss     r7, r8, r",9, VAL2,", r",10, VAL1,"")
+        TEST_R(   "smulls       lr, r12, r",11,VAL3,", r13")
+        TEST_UNSUPPORTED(".word 0xe0d1f392 @ smulls pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe0df1392 @ smulls r1, pc, r2, r3")
+
+        TEST_RRRR(  "smlal      r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR(  "smlalle    r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRR(   "smlal      r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+        TEST_UNSUPPORTED(".word 0xe0ef1392 @ smlal pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe0e1f392 @ smlal r1, pc, r2, r3")
+        TEST_RRRR(  "smlals     r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR(  "smlalles   r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRR(   "smlals     r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+        TEST_UNSUPPORTED(".word 0xe0ff1392 @ smlals pc, r1, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe0f0f392 @ smlals r0, pc, r2, r3")
+        TEST_UNSUPPORTED(".word 0xe0f0139f @ smlals r0, r1, pc, r3")
+        TEST_UNSUPPORTED(".word 0xe0f01f92 @ smlals r0, r1, r2, pc")
+
+        TEST_GROUP("Synchronization primitives")
+
+        /*
+         * Use hard coded constants for SWP instructions to avoid warnings
+         * about deprecated instructions.
+         */
+        TEST_RP( ".word 0xe108e097 @ swp        lr, r",7,VAL2,", [r",8,0,"]")
+        TEST_R(  ".word 0x610d0091 @ swpvs      r0, r",1,VAL1,", [sp]")
+        TEST_RP( ".word 0xe10cd09e @ swp        sp, r",14,VAL2,", [r",12,13*4,"]")
+        TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
+        TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
+        TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
+        TEST_RP( ".word 0xe148e097 @ swpb       lr, r",7,VAL2,", [r",8,0,"]")
+        TEST_R(  ".word 0x614d0091 @ swpvsb     r0, r",1,VAL1,", [sp]")
+        TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
+
+        TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe1200090") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe1300090") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe1500090") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe1600090") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */
+#if __LINUX_ARM_ARCH__ >= 6
+        TEST_UNSUPPORTED("ldrex r2, [sp]")
+        TEST_UNSUPPORTED("strexd        r0, r2, r3, [sp]")
+        TEST_UNSUPPORTED("ldrexd        r2, r3, [sp]")
+        TEST_UNSUPPORTED("strexb        r0, r2, [sp]")
+        TEST_UNSUPPORTED("ldrexb        r2, [sp]")
+        TEST_UNSUPPORTED("strexh        r0, r2, [sp]")
+        TEST_UNSUPPORTED("ldrexh        r2, [sp]")
+#endif
+        TEST_GROUP("Extra load/store instructions")
+
+        TEST_RPR(  "strh        r",0, VAL1,", [r",1, 48,", -r",2, 24,"]")
+        TEST_RPR(  "streqh      r",14,VAL2,", [r",13,0, ", r",12, 48,"]")
+        TEST_RPR(  "strh        r",1, VAL1,", [r",2, 24,", r",3,  48,"]!")
+        TEST_RPR(  "strneh      r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
+        TEST_RPR(  "strh        r",2, VAL1,", [r",3, 24,"], r",4, 48,"")
+        TEST_RPR(  "strh        r",10,VAL2,", [r",9, 48,"], -r",11,24,"")
+        TEST_UNSUPPORTED(".word 0xe1afc0ba      @ strh r12, [pc, r10]!")
+        TEST_UNSUPPORTED(".word 0xe089f0bb      @ strh pc, [r9], r11")
+        TEST_UNSUPPORTED(".word 0xe089a0bf      @ strh r10, [r9], pc")
+
+        TEST_PR(   "ldrh        r0, [r",0,  48,", -r",2, 24,"]")
+        TEST_PR(   "ldrcsh      r14, [r",13,0, ", r",12, 48,"]")
+        TEST_PR(   "ldrh        r1, [r",2,  24,", r",3,  48,"]!")
+        TEST_PR(   "ldrcch      r12, [r",11,48,", -r",10,24,"]!")
+        TEST_PR(   "ldrh        r2, [r",3,  24,"], r",4, 48,"")
+        TEST_PR(   "ldrh        r10, [r",9, 48,"], -r",11,24,"")
+        TEST_UNSUPPORTED(".word 0xe1bfc0ba      @ ldrh r12, [pc, r10]!")
+        TEST_UNSUPPORTED(".word 0xe099f0bb      @ ldrh pc, [r9], r11")
+        TEST_UNSUPPORTED(".word 0xe099a0bf      @ ldrh r10, [r9], pc")
+
+        TEST_RP(   "strh        r",0, VAL1,", [r",1, 24,", #-2]")
+        TEST_RP(   "strmih      r",14,VAL2,", [r",13,0, ", #2]")
+        TEST_RP(   "strh        r",1, VAL1,", [r",2, 24,", #4]!")
+        TEST_RP(   "strplh      r",12,VAL2,", [r",11,24,", #-4]!")
+        TEST_RP(   "strh        r",2, VAL1,", [r",3, 24,"], #48")
+        TEST_RP(   "strh        r",10,VAL2,", [r",9, 64,"], #-48")
+        TEST_UNSUPPORTED(".word 0xe1efc3b0      @ strh r12, [pc, #48]!")
+        TEST_UNSUPPORTED(".word 0xe0c9f3b0      @ strh pc, [r9], #48")
+
+        TEST_P(    "ldrh        r0, [r",0,  24,", #-2]")
+        TEST_P(    "ldrvsh      r14, [r",13,0, ", #2]")
+        TEST_P(    "ldrh        r1, [r",2,  24,", #4]!")
+        TEST_P(    "ldrvch      r12, [r",11,24,", #-4]!")
+        TEST_P(    "ldrh        r2, [r",3,  24,"], #48")
+        TEST_P(    "ldrh        r10, [r",9, 64,"], #-48")
+        TEST(      "ldrh        r0, [pc, #0]")
+        TEST_UNSUPPORTED(".word 0xe1ffc3b0      @ ldrh r12, [pc, #48]!")
+        TEST_UNSUPPORTED(".word 0xe0d9f3b0      @ ldrh pc, [r9], #48")
+
+        TEST_PR(   "ldrsb       r0, [r",0,  48,", -r",2, 24,"]")
+        TEST_PR(   "ldrhisb     r14, [r",13,0,", r",12,  48,"]")
+        TEST_PR(   "ldrsb       r1, [r",2,  24,", r",3,  48,"]!")
+        TEST_PR(   "ldrlssb     r12, [r",11,48,", -r",10,24,"]!")
+        TEST_PR(   "ldrsb       r2, [r",3,  24,"], r",4, 48,"")
+        TEST_PR(   "ldrsb       r10, [r",9, 48,"], -r",11,24,"")
+        TEST_UNSUPPORTED(".word 0xe1bfc0da      @ ldrsb r12, [pc, r10]!")
+        TEST_UNSUPPORTED(".word 0xe099f0db      @ ldrsb pc, [r9], r11")
+
+        TEST_P(    "ldrsb       r0, [r",0,  24,", #-1]")
+        TEST_P(    "ldrgesb     r14, [r",13,0, ", #1]")
+        TEST_P(    "ldrsb       r1, [r",2,  24,", #4]!")
+        TEST_P(    "ldrltsb     r12, [r",11,24,", #-4]!")
+        TEST_P(    "ldrsb       r2, [r",3,  24,"], #48")
+        TEST_P(    "ldrsb       r10, [r",9, 64,"], #-48")
+        TEST(      "ldrsb       r0, [pc, #0]")
+        TEST_UNSUPPORTED(".word 0xe1ffc3d0      @ ldrsb r12, [pc, #48]!")
+        TEST_UNSUPPORTED(".word 0xe0d9f3d0      @ ldrsb pc, [r9], #48")
+
+        TEST_PR(   "ldrsh       r0, [r",0,  48,", -r",2, 24,"]")
+        TEST_PR(   "ldrgtsh     r14, [r",13,0, ", r",12, 48,"]")
+        TEST_PR(   "ldrsh       r1, [r",2,  24,", r",3,  48,"]!")
+        TEST_PR(   "ldrlesh     r12, [r",11,48,", -r",10,24,"]!")
+        TEST_PR(   "ldrsh       r2, [r",3,  24,"], r",4, 48,"")
+        TEST_PR(   "ldrsh       r10, [r",9, 48,"], -r",11,24,"")
+        TEST_UNSUPPORTED(".word 0xe1bfc0fa      @ ldrsh r12, [pc, r10]!")
+        TEST_UNSUPPORTED(".word 0xe099f0fb      @ ldrsh pc, [r9], r11")
+
+        TEST_P(    "ldrsh       r0, [r",0,  24,", #-1]")
+        TEST_P(    "ldreqsh     r14, [r",13,0 ,", #1]")
+        TEST_P(    "ldrsh       r1, [r",2,  24,", #4]!")
+        TEST_P(    "ldrnesh     r12, [r",11,24,", #-4]!")
+        TEST_P(    "ldrsh       r2, [r",3,  24,"], #48")
+        TEST_P(    "ldrsh       r10, [r",9, 64,"], #-48")
+        TEST(      "ldrsh       r0, [pc, #0]")
+        TEST_UNSUPPORTED(".word 0xe1ffc3f0      @ ldrsh r12, [pc, #48]!")
+        TEST_UNSUPPORTED(".word 0xe0d9f3f0      @ ldrsh pc, [r9], #48")
+
+#if __LINUX_ARM_ARCH__ >= 7
+        TEST_UNSUPPORTED("strht r1, [r2], r3")
+        TEST_UNSUPPORTED("ldrht r1, [r2], r3")
+        TEST_UNSUPPORTED("strht r1, [r2], #48")
+        TEST_UNSUPPORTED("ldrht r1, [r2], #48")
+        TEST_UNSUPPORTED("ldrsbt        r1, [r2], r3")
+        TEST_UNSUPPORTED("ldrsbt        r1, [r2], #48")
+        TEST_UNSUPPORTED("ldrsht        r1, [r2], r3")
+        TEST_UNSUPPORTED("ldrsht        r1, [r2], #48")
+#endif
+
+        TEST_RPR(  "strd        r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
+        TEST_RPR(  "strccd      r",8, VAL2,", [r",13,0, ", r",12,48,"]")
+        TEST_RPR(  "strd        r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
+        TEST_RPR(  "strcsd      r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
+        TEST_RPR(  "strd        r",2, VAL1,", [r",3, 24,"], r",4,48,"")
+        TEST_RPR(  "strd        r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
+        TEST_UNSUPPORTED(".word 0xe1afc0fa      @ strd r12, [pc, r10]!")
+
+        TEST_PR(   "ldrd        r0, [r",0, 48,", -r",2,24,"]")
+        TEST_PR(   "ldrmid      r8, [r",13,0, ", r",12,48,"]")
+        TEST_PR(   "ldrd        r4, [r",2, 24,", r",3, 48,"]!")
+        TEST_PR(   "ldrpld      r6, [r",11,48,", -r",10,24,"]!")
+        TEST_PR(   "ldrd        r2, [r",5, 24,"], r",4,48,"")
+        TEST_PR(   "ldrd        r10, [r",9,48,"], -r",7,24,"")
+        TEST_UNSUPPORTED(".word 0xe1afc0da      @ ldrd r12, [pc, r10]!")
+        TEST_UNSUPPORTED(".word 0xe089f0db      @ ldrd pc, [r9], r11")
+        TEST_UNSUPPORTED(".word 0xe089e0db      @ ldrd lr, [r9], r11")
+        TEST_UNSUPPORTED(".word 0xe089c0df      @ ldrd r12, [r9], pc")
+
+        TEST_RP(   "strd        r",0, VAL1,", [r",1, 24,", #-8]")
+        TEST_RP(   "strvsd      r",8, VAL2,", [r",13,0, ", #8]")
+        TEST_RP(   "strd        r",4, VAL1,", [r",2, 24,", #16]!")
+        TEST_RP(   "strvcd      r",12,VAL2,", [r",11,24,", #-16]!")
+        TEST_RP(   "strd        r",2, VAL1,", [r",4, 24,"], #48")
+        TEST_RP(   "strd        r",10,VAL2,", [r",9, 64,"], #-48")
+        TEST_UNSUPPORTED(".word 0xe1efc3f0      @ strd r12, [pc, #48]!")
+
+        TEST_P(    "ldrd        r0, [r",0, 24,", #-8]")
+        TEST_P(    "ldrhid      r8, [r",13,0, ", #8]")
+        TEST_P(    "ldrd        r4, [r",2, 24,", #16]!")
+        TEST_P(    "ldrlsd      r6, [r",11,24,", #-16]!")
+        TEST_P(    "ldrd        r2, [r",5, 24,"], #48")
+        TEST_P(    "ldrd        r10, [r",9,6,"], #-48")
+        TEST_UNSUPPORTED(".word 0xe1efc3d0      @ ldrd r12, [pc, #48]!")
+        TEST_UNSUPPORTED(".word 0xe0c9f3d0      @ ldrd pc, [r9], #48")
+        TEST_UNSUPPORTED(".word 0xe0c9e3d0      @ ldrd lr, [r9], #48")
+
+        TEST_GROUP("Miscellaneous")
+
+#if __LINUX_ARM_ARCH__ >= 7
+        TEST("movw      r0, #0")
+        TEST("movw      r0, #0xffff")
+        TEST("movw      lr, #0xffff")
+        TEST_UNSUPPORTED(".word 0xe300f000      @ movw pc, #0")
+        TEST_R("movt    r",0, VAL1,", #0")
+        TEST_R("movt    r",0, VAL2,", #0xffff")
+        TEST_R("movt    r",14,VAL1,", #0xffff")
+        TEST_UNSUPPORTED(".word 0xe340f000      @ movt pc, #0")
+#endif
+
+        TEST_UNSUPPORTED("msr   cpsr, 0x13")
+        TEST_UNSUPPORTED("msr   cpsr_f, 0xf0000000")
+        TEST_UNSUPPORTED("msr   spsr, 0x13")
+
+#if __LINUX_ARM_ARCH__ >= 7
+        TEST_SUPPORTED("yield")
+        TEST("sev")
+        TEST("nop")
+        TEST("wfi")
+        TEST_SUPPORTED("wfe")
+        TEST_UNSUPPORTED("dbg #0")
+#endif
+
+        TEST_GROUP("Load/store word and unsigned byte")
+
+#define LOAD_STORE(byte)                                                        \
+        TEST_RP( "str"byte"     r",0, VAL1,", [r",1, 24,", #-2]")               \
+        TEST_RP( "str"byte"     r",14,VAL2,", [r",13,0, ", #2]")                \
+        TEST_RP( "str"byte"     r",1, VAL1,", [r",2, 24,", #4]!")               \
+        TEST_RP( "str"byte"     r",12,VAL2,", [r",11,24,", #-4]!")              \
+        TEST_RP( "str"byte"     r",2, VAL1,", [r",3, 24,"], #48")               \
+        TEST_RP( "str"byte"     r",10,VAL2,", [r",9, 64,"], #-48")              \
+        TEST_RPR("str"byte"     r",0, VAL1,", [r",1, 48,", -r",2, 24,"]")       \
+        TEST_RPR("str"byte"     r",14,VAL2,", [r",13,0, ", r",12, 48,"]")       \
+        TEST_RPR("str"byte"     r",1, VAL1,", [r",2, 24,", r",3,  48,"]!")      \
+        TEST_RPR("str"byte"     r",12,VAL2,", [r",11,48,", -r",10,24,"]!")      \
+        TEST_RPR("str"byte"     r",2, VAL1,", [r",3, 24,"], r",4, 48,"")        \
+        TEST_RPR("str"byte"     r",10,VAL2,", [r",9, 48,"], -r",11,24,"")       \
+        TEST_RPR("str"byte"     r",0, VAL1,", [r",1, 24,", r",2,  32,", asl #1]")\
+        TEST_RPR("str"byte"     r",14,VAL2,", [r",13,0, ", r",12, 32,", lsr #2]")\
+        TEST_RPR("str"byte"     r",1, VAL1,", [r",2, 24,", r",3,  32,", asr #3]!")\
+        TEST_RPR("str"byte"     r",12,VAL2,", [r",11,24,", r",10, 4,", ror #31]!")\
+        TEST_P(  "ldr"byte"     r0, [r",0,  24,", #-2]")                        \
+        TEST_P(  "ldr"byte"     r14, [r",13,0, ", #2]")                         \
+        TEST_P(  "ldr"byte"     r1, [r",2,  24,", #4]!")                        \
+        TEST_P(  "ldr"byte"     r12, [r",11,24,", #-4]!")                       \
+        TEST_P(  "ldr"byte"     r2, [r",3,  24,"], #48")                        \
+        TEST_P(  "ldr"byte"     r10, [r",9, 64,"], #-48")                       \
+        TEST_PR( "ldr"byte"     r0, [r",0,  48,", -r",2, 24,"]")                \
+        TEST_PR( "ldr"byte"     r14, [r",13,0, ", r",12, 48,"]")                \
+        TEST_PR( "ldr"byte"     r1, [r",2,  24,", r",3, 48,"]!")                \
+        TEST_PR( "ldr"byte"     r12, [r",11,48,", -r",10,24,"]!")               \
+        TEST_PR( "ldr"byte"     r2, [r",3,  24,"], r",4, 48,"")                 \
+        TEST_PR( "ldr"byte"     r10, [r",9, 48,"], -r",11,24,"")                \
+        TEST_PR( "ldr"byte"     r0, [r",0,  24,", r",2,  32,", asl #1]")        \
+        TEST_PR( "ldr"byte"     r14, [r",13,0, ", r",12, 32,", lsr #2]")        \
+        TEST_PR( "ldr"byte"     r1, [r",2,  24,", r",3,  32,", asr #3]!")       \
+        TEST_PR( "ldr"byte"     r12, [r",11,24,", r",10, 4,", ror #31]!")       \
+        TEST(    "ldr"byte"     r0, [pc, #0]")                                  \
+        TEST_R(  "ldr"byte"     r12, [pc, r",14,0,"]")
+
+        LOAD_STORE("")
+        TEST_P(   "str  pc, [r",0,0,", #15*4]")
+        TEST_R(   "str  pc, [sp, r",2,15*4,"]")
+        TEST_BF(  "ldr  pc, [sp, #15*4]")
+        TEST_BF_R("ldr  pc, [sp, r",2,15*4,"]")
+
+        TEST_P(   "str  sp, [r",0,0,", #13*4]")
+        TEST_R(   "str  sp, [sp, r",2,13*4,"]")
+        TEST_BF(  "ldr  sp, [sp, #13*4]")
+        TEST_BF_R("ldr  sp, [sp, r",2,13*4,"]")
+
+#ifdef CONFIG_THUMB2_KERNEL
+        TEST_ARM_TO_THUMB_INTERWORK_P("ldr      pc, [r",0,0,", #15*4]")
+#endif
+        TEST_UNSUPPORTED(".word 0xe5af6008      @ str r6, [pc, #8]!")
+        TEST_UNSUPPORTED(".word 0xe7af6008      @ str r6, [pc, r8]!")
+        TEST_UNSUPPORTED(".word 0xe5bf6008      @ ldr r6, [pc, #8]!")
+        TEST_UNSUPPORTED(".word 0xe7bf6008      @ ldr r6, [pc, r8]!")
+        TEST_UNSUPPORTED(".word 0xe788600f      @ str r6, [r8, pc]")
+        TEST_UNSUPPORTED(".word 0xe798600f      @ ldr r6, [r8, pc]")
+
+        LOAD_STORE("b")
+        TEST_UNSUPPORTED(".word 0xe5f7f008      @ ldrb pc, [r7, #8]!")
+        TEST_UNSUPPORTED(".word 0xe7f7f008      @ ldrb pc, [r7, r8]!")
+        TEST_UNSUPPORTED(".word 0xe5ef6008      @ strb r6, [pc, #8]!")
+        TEST_UNSUPPORTED(".word 0xe7ef6008      @ strb r6, [pc, r3]!")
+        TEST_UNSUPPORTED(".word 0xe5ff6008      @ ldrb r6, [pc, #8]!")
+        TEST_UNSUPPORTED(".word 0xe7ff6008      @ ldrb r6, [pc, r3]!")
+
+        TEST_UNSUPPORTED("ldrt  r0, [r1], #4")
+        TEST_UNSUPPORTED("ldrt  r1, [r2], r3")
+        TEST_UNSUPPORTED("strt  r2, [r3], #4")
+        TEST_UNSUPPORTED("strt  r3, [r4], r5")
+        TEST_UNSUPPORTED("ldrbt r4, [r5], #4")
+        TEST_UNSUPPORTED("ldrbt r5, [r6], r7")
+        TEST_UNSUPPORTED("strbt r6, [r7], #4")
+        TEST_UNSUPPORTED("strbt r7, [r8], r9")
+
+#if __LINUX_ARM_ARCH__ >= 7
+        TEST_GROUP("Parallel addition and subtraction, signed")
+
+        TEST_UNSUPPORTED(".word 0xe6000010") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe60fffff") /* Unallocated space */
+
+        TEST_RR(    "sadd16     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "sadd16     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe61cff1a      @ sadd16        pc, r12, r10")
+        TEST_RR(    "sasx       r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "sasx       r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe61cff3a      @ sasx  pc, r12, r10")
+        TEST_RR(    "ssax       r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "ssax       r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe61cff5a      @ ssax  pc, r12, r10")
+        TEST_RR(    "ssub16     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "ssub16     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe61cff7a      @ ssub16        pc, r12, r10")
+        TEST_RR(    "sadd8      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "sadd8      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe61cff9a      @ sadd8 pc, r12, r10")
+        TEST_UNSUPPORTED(".word 0xe61000b0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe61fffbf") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe61000d0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe61fffdf") /* Unallocated space */
+        TEST_RR(    "ssub8      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "ssub8      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe61cfffa      @ ssub8 pc, r12, r10")
+
+        TEST_RR(    "qadd16     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "qadd16     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe62cff1a      @ qadd16        pc, r12, r10")
+        TEST_RR(    "qasx       r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "qasx       r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe62cff3a      @ qasx  pc, r12, r10")
+        TEST_RR(    "qsax       r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "qsax       r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe62cff5a      @ qsax  pc, r12, r10")
+        TEST_RR(    "qsub16     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "qsub16     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe62cff7a      @ qsub16        pc, r12, r10")
+        TEST_RR(    "qadd8      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "qadd8      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe62cff9a      @ qadd8 pc, r12, r10")
+        TEST_UNSUPPORTED(".word 0xe62000b0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe62fffbf") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe62000d0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe62fffdf") /* Unallocated space */
+        TEST_RR(    "qsub8      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "qsub8      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe62cfffa      @ qsub8 pc, r12, r10")
+
+        TEST_RR(    "shadd16    r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "shadd16    r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe63cff1a      @ shadd16       pc, r12, r10")
+        TEST_RR(    "shasx      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "shasx      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe63cff3a      @ shasx pc, r12, r10")
+        TEST_RR(    "shsax      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "shsax      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe63cff5a      @ shsax pc, r12, r10")
+        TEST_RR(    "shsub16    r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "shsub16    r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe63cff7a      @ shsub16       pc, r12, r10")
+        TEST_RR(    "shadd8     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "shadd8     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe63cff9a      @ shadd8        pc, r12, r10")
+        TEST_UNSUPPORTED(".word 0xe63000b0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe63fffbf") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe63000d0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe63fffdf") /* Unallocated space */
+        TEST_RR(    "shsub8     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "shsub8     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe63cfffa      @ shsub8        pc, r12, r10")
+
+        TEST_GROUP("Parallel addition and subtraction, unsigned")
+
+        TEST_UNSUPPORTED(".word 0xe6400010") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe64fffff") /* Unallocated space */
+
+        TEST_RR(    "uadd16     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uadd16     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe65cff1a      @ uadd16        pc, r12, r10")
+        TEST_RR(    "uasx       r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uasx       r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe65cff3a      @ uasx  pc, r12, r10")
+        TEST_RR(    "usax       r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "usax       r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe65cff5a      @ usax  pc, r12, r10")
+        TEST_RR(    "usub16     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "usub16     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe65cff7a      @ usub16        pc, r12, r10")
+        TEST_RR(    "uadd8      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uadd8      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe65cff9a      @ uadd8 pc, r12, r10")
+        TEST_UNSUPPORTED(".word 0xe65000b0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe65fffbf") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe65000d0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe65fffdf") /* Unallocated space */
+        TEST_RR(    "usub8      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "usub8      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe65cfffa      @ usub8 pc, r12, r10")
+
+        TEST_RR(    "uqadd16    r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uqadd16    r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe66cff1a      @ uqadd16       pc, r12, r10")
+        TEST_RR(    "uqasx      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uqasx      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe66cff3a      @ uqasx pc, r12, r10")
+        TEST_RR(    "uqsax      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uqsax      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe66cff5a      @ uqsax pc, r12, r10")
+        TEST_RR(    "uqsub16    r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uqsub16    r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe66cff7a      @ uqsub16       pc, r12, r10")
+        TEST_RR(    "uqadd8     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uqadd8     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe66cff9a      @ uqadd8        pc, r12, r10")
+        TEST_UNSUPPORTED(".word 0xe66000b0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe66fffbf") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe66000d0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe66fffdf") /* Unallocated space */
+        TEST_RR(    "uqsub8     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uqsub8     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe66cfffa      @ uqsub8        pc, r12, r10")
+
+        TEST_RR(    "uhadd16    r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uhadd16    r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe67cff1a      @ uhadd16       pc, r12, r10")
+        TEST_RR(    "uhasx      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uhasx      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe67cff3a      @ uhasx pc, r12, r10")
+        TEST_RR(    "uhsax      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uhsax      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe67cff5a      @ uhsax pc, r12, r10")
+        TEST_RR(    "uhsub16    r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uhsub16    r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe67cff7a      @ uhsub16       pc, r12, r10")
+        TEST_RR(    "uhadd8     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uhadd8     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe67cff9a      @ uhadd8        pc, r12, r10")
+        TEST_UNSUPPORTED(".word 0xe67000b0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe67fffbf") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe67000d0") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe67fffdf") /* Unallocated space */
+        TEST_RR(    "uhsub8     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uhsub8     r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe67cfffa      @ uhsub8        pc, r12, r10")
+        TEST_UNSUPPORTED(".word 0xe67feffa      @ uhsub8        r14, pc, r10")
+        TEST_UNSUPPORTED(".word 0xe67cefff      @ uhsub8        r14, r12, pc")
+#endif /* __LINUX_ARM_ARCH__ >= 7 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+        TEST_GROUP("Packing, unpacking, saturation, and reversal")
+
+        TEST_RR(    "pkhbt      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "pkhbt      r14,r",12, HH1,", r",10,HH2,", lsl #2")
+        TEST_UNSUPPORTED(".word 0xe68cf11a      @ pkhbt pc, r12, r10, lsl #2")
+        TEST_RR(    "pkhtb      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "pkhtb      r14,r",12, HH1,", r",10,HH2,", asr #2")
+        TEST_UNSUPPORTED(".word 0xe68cf15a      @ pkhtb pc, r12, r10, asr #2")
+        TEST_UNSUPPORTED(".word 0xe68fe15a      @ pkhtb r14, pc, r10, asr #2")
+        TEST_UNSUPPORTED(".word 0xe68ce15f      @ pkhtb r14, r12, pc, asr #2")
+        TEST_UNSUPPORTED(".word 0xe6900010") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe69fffdf") /* Unallocated space */
+
+        TEST_R(     "ssat       r0, #24, r",0,   VAL1,"")
+        TEST_R(     "ssat       r14, #24, r",12, VAL2,"")
+        TEST_R(     "ssat       r0, #24, r",0,   VAL1,", lsl #8")
+        TEST_R(     "ssat       r14, #24, r",12, VAL2,", asr #8")
+        TEST_UNSUPPORTED(".word 0xe6b7f01c      @ ssat  pc, #24, r12")
+
+        TEST_R(     "usat       r0, #24, r",0,   VAL1,"")
+        TEST_R(     "usat       r14, #24, r",12, VAL2,"")
+        TEST_R(     "usat       r0, #24, r",0,   VAL1,", lsl #8")
+        TEST_R(     "usat       r14, #24, r",12, VAL2,", asr #8")
+        TEST_UNSUPPORTED(".word 0xe6f7f01c      @ usat  pc, #24, r12")
+
+        TEST_RR(    "sxtab16    r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "sxtab16    r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "sxtb16     r8, r",7,  HH1,"")
+        TEST_UNSUPPORTED(".word 0xe68cf47a      @ sxtab16       pc,r12, r10, ror #8")
+
+        TEST_RR(    "sel        r0, r",0,  VAL1,", r",1, VAL2,"")
+        TEST_RR(    "sel        r14, r",12,VAL1,", r",10, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe68cffba      @ sel   pc, r12, r10")
+        TEST_UNSUPPORTED(".word 0xe68fefba      @ sel   r14, pc, r10")
+        TEST_UNSUPPORTED(".word 0xe68cefbf      @ sel   r14, r12, pc")
+
+        TEST_R(     "ssat16     r0, #12, r",0,   HH1,"")
+        TEST_R(     "ssat16     r14, #12, r",12, HH2,"")
+        TEST_UNSUPPORTED(".word 0xe6abff3c      @ ssat16        pc, #12, r12")
+
+        TEST_RR(    "sxtab      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "sxtab      r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "sxtb       r8, r",7,  HH1,"")
+        TEST_UNSUPPORTED(".word 0xe6acf47a      @ sxtab pc,r12, r10, ror #8")
+
+        TEST_R(     "rev        r0, r",0,   VAL1,"")
+        TEST_R(     "rev        r14, r",12, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe6bfff3c      @ rev   pc, r12")
+
+        TEST_RR(    "sxtah      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "sxtah      r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "sxth       r8, r",7,  HH1,"")
+        TEST_UNSUPPORTED(".word 0xe6bcf47a      @ sxtah pc,r12, r10, ror #8")
+
+        TEST_R(     "rev16      r0, r",0,   VAL1,"")
+        TEST_R(     "rev16      r14, r",12, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe6bfffbc      @ rev16 pc, r12")
+
+        TEST_RR(    "uxtab16    r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uxtab16    r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "uxtb16     r8, r",7,  HH1,"")
+        TEST_UNSUPPORTED(".word 0xe6ccf47a      @ uxtab16       pc,r12, r10, ror #8")
+
+        TEST_R(     "usat16     r0, #12, r",0,   HH1,"")
+        TEST_R(     "usat16     r14, #12, r",12, HH2,"")
+        TEST_UNSUPPORTED(".word 0xe6ecff3c      @ usat16        pc, #12, r12")
+        TEST_UNSUPPORTED(".word 0xe6ecef3f      @ usat16        r14, #12, pc")
+
+        TEST_RR(    "uxtab      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uxtab      r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "uxtb       r8, r",7,  HH1,"")
+        TEST_UNSUPPORTED(".word 0xe6ecf47a      @ uxtab pc,r12, r10, ror #8")
+
+#if __LINUX_ARM_ARCH__ >= 7
+        TEST_R(     "rbit       r0, r",0,   VAL1,"")
+        TEST_R(     "rbit       r14, r",12, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe6ffff3c      @ rbit  pc, r12")
+#endif
+
+        TEST_RR(    "uxtah      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uxtah      r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "uxth       r8, r",7,  HH1,"")
+        TEST_UNSUPPORTED(".word 0xe6fff077      @ uxth  pc, r7")
+        TEST_UNSUPPORTED(".word 0xe6ff807f      @ uxth  r8, pc")
+        TEST_UNSUPPORTED(".word 0xe6fcf47a      @ uxtah pc, r12, r10, ror #8")
+        TEST_UNSUPPORTED(".word 0xe6fce47f      @ uxtah r14, r12, pc, ror #8")
+
+        TEST_R(     "revsh      r0, r",0,   VAL1,"")
+        TEST_R(     "revsh      r14, r",12, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe6ffff3c      @ revsh pc, r12")
+        TEST_UNSUPPORTED(".word 0xe6ffef3f      @ revsh r14, pc")
+
+        TEST_UNSUPPORTED(".word 0xe6900070") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe69fff7f") /* Unallocated space */
+
+        TEST_UNSUPPORTED(".word 0xe6d00070") /* Unallocated space */
+        TEST_UNSUPPORTED(".word 0xe6dfff7f") /* Unallocated space */
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+        TEST_GROUP("Signed multiplies")
+
+        TEST_RRR(   "smlad      r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
+        TEST_RRR(   "smlad      r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe70f8a1c      @ smlad pc, r12, r10, r8")
+        TEST_RRR(   "smladx     r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
+        TEST_RRR(   "smladx     r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe70f8a3c      @ smladx        pc, r12, r10, r8")
+
+        TEST_RR(   "smuad       r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(   "smuad       r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe70ffa1c      @ smuad pc, r12, r10")
+        TEST_RR(   "smuadx      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(   "smuadx      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe70ffa3c      @ smuadx        pc, r12, r10")
+
+        TEST_RRR(   "smlsd      r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
+        TEST_RRR(   "smlsd      r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe70f8a5c      @ smlsd pc, r12, r10, r8")
+        TEST_RRR(   "smlsdx     r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
+        TEST_RRR(   "smlsdx     r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe70f8a7c      @ smlsdx        pc, r12, r10, r8")
+
+        TEST_RR(   "smusd       r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(   "smusd       r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe70ffa5c      @ smusd pc, r12, r10")
+        TEST_RR(   "smusdx      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(   "smusdx      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_UNSUPPORTED(".word 0xe70ffa7c      @ smusdx        pc, r12, r10")
+
+        TEST_RRRR( "smlald      r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+        TEST_RRRR( "smlald      r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+        TEST_UNSUPPORTED(".word 0xe74af819      @ smlald        pc, r10, r9, r8")
+        TEST_UNSUPPORTED(".word 0xe74fb819      @ smlald        r11, pc, r9, r8")
+        TEST_UNSUPPORTED(".word 0xe74ab81f      @ smlald        r11, r10, pc, r8")
+        TEST_UNSUPPORTED(".word 0xe74abf19      @ smlald        r11, r10, r9, pc")
+
+        TEST_RRRR( "smlaldx     r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+        TEST_RRRR( "smlaldx     r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+        TEST_UNSUPPORTED(".word 0xe74af839      @ smlaldx       pc, r10, r9, r8")
+        TEST_UNSUPPORTED(".word 0xe74fb839      @ smlaldx       r11, pc, r9, r8")
+
+        TEST_RRR(  "smmla       r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
+        TEST_RRR(  "smmla       r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe75f8a1c      @ smmla pc, r12, r10, r8")
+        TEST_RRR(  "smmlar      r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
+        TEST_RRR(  "smmlar      r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe75f8a3c      @ smmlar        pc, r12, r10, r8")
+
+        TEST_RR(   "smmul       r0, r",0,  VAL1,", r",1, VAL2,"")
+        TEST_RR(   "smmul       r14, r",12,VAL2,", r",10,VAL1,"")
+        TEST_UNSUPPORTED(".word 0xe75ffa1c      @ smmul pc, r12, r10")
+        TEST_RR(   "smmulr      r0, r",0,  VAL1,", r",1, VAL2,"")
+        TEST_RR(   "smmulr      r14, r",12,VAL2,", r",10,VAL1,"")
+        TEST_UNSUPPORTED(".word 0xe75ffa3c      @ smmulr        pc, r12, r10")
+
+        TEST_RRR(  "smmls       r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
+        TEST_RRR(  "smmls       r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe75f8adc      @ smmls pc, r12, r10, r8")
+        TEST_RRR(  "smmlsr      r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
+        TEST_RRR(  "smmlsr      r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+        TEST_UNSUPPORTED(".word 0xe75f8afc      @ smmlsr        pc, r12, r10, r8")
+        TEST_UNSUPPORTED(".word 0xe75e8aff      @ smmlsr        r14, pc, r10, r8")
+        TEST_UNSUPPORTED(".word 0xe75e8ffc      @ smmlsr        r14, r12, pc, r8")
+        TEST_UNSUPPORTED(".word 0xe75efafc      @ smmlsr        r14, r12, r10, pc")
+
+        TEST_RR(   "usad8       r0, r",0,  VAL1,", r",1, VAL2,"")
+        TEST_RR(   "usad8       r14, r",12,VAL2,", r",10,VAL1,"")
+        TEST_UNSUPPORTED(".word 0xe75ffa1c      @ usad8 pc, r12, r10")
+        TEST_UNSUPPORTED(".word 0xe75efa1f      @ usad8 r14, pc, r10")
+        TEST_UNSUPPORTED(".word 0xe75eff1c      @ usad8 r14, r12, pc")
+
+        TEST_RRR(  "usada8      r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL3,"")
+        TEST_RRR(  "usada8      r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
+        TEST_UNSUPPORTED(".word 0xe78f8a1c      @ usada8        pc, r12, r10, r8")
+        TEST_UNSUPPORTED(".word 0xe78e8a1f      @ usada8        r14, pc, r10, r8")
+        TEST_UNSUPPORTED(".word 0xe78e8f1c      @ usada8        r14, r12, pc, r8")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 7
+        TEST_GROUP("Bit Field")
+
+        TEST_R(     "sbfx       r0, r",0  , VAL1,", #0, #31")
+        TEST_R(     "sbfxeq     r14, r",12, VAL2,", #8, #16")
+        TEST_R(     "sbfx       r4, r",10,  VAL1,", #16, #15")
+        TEST_UNSUPPORTED(".word 0xe7aff45c      @ sbfx  pc, r12, #8, #16")
+
+        TEST_R(     "ubfx       r0, r",0  , VAL1,", #0, #31")
+        TEST_R(     "ubfxcs     r14, r",12, VAL2,", #8, #16")
+        TEST_R(     "ubfx       r4, r",10,  VAL1,", #16, #15")
+        TEST_UNSUPPORTED(".word 0xe7eff45c      @ ubfx  pc, r12, #8, #16")
+        TEST_UNSUPPORTED(".word 0xe7efc45f      @ ubfx  r12, pc, #8, #16")
+
+        TEST_R(     "bfc        r",0, VAL1,", #4, #20")
+        TEST_R(     "bfcvs      r",14,VAL2,", #4, #20")
+        TEST_R(     "bfc        r",7, VAL1,", #0, #31")
+        TEST_R(     "bfc        r",8, VAL2,", #0, #31")
+        TEST_UNSUPPORTED(".word 0xe7def01f      @ bfc   pc, #0, #31");
+
+        TEST_RR(    "bfi        r",0, VAL1,", r",0  , VAL2,", #0, #31")
+        TEST_RR(    "bfipl      r",12,VAL1,", r",14 , VAL2,", #4, #20")
+        TEST_UNSUPPORTED(".word 0xe7d7f21e      @ bfi   pc, r14, #4, #20")
+
+        TEST_UNSUPPORTED(".word 0x07f000f0")  /* Permanently UNDEFINED */
+        TEST_UNSUPPORTED(".word 0x07ffffff")  /* Permanently UNDEFINED */
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+        TEST_GROUP("Branch, branch with link, and block data transfer")
+
+        TEST_P(   "stmda        r",0, 16*4,", {r0}")
+        TEST_P(   "stmeqda      r",4, 16*4,", {r0-r15}")
+        TEST_P(   "stmneda      r",8, 16*4,"!, {r8-r15}")
+        TEST_P(   "stmda        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+        TEST_P(   "stmda        r",13,0,   "!, {pc}")
+
+        TEST_P(   "ldmda        r",0, 16*4,", {r0}")
+        TEST_BF_P("ldmcsda      r",4, 15*4,", {r0-r15}")
+        TEST_BF_P("ldmccda      r",7, 15*4,"!, {r8-r15}")
+        TEST_P(   "ldmda        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+        TEST_BF_P("ldmda        r",14,15*4,"!, {pc}")
+
+        TEST_P(   "stmia        r",0, 16*4,", {r0}")
+        TEST_P(   "stmmiia      r",4, 16*4,", {r0-r15}")
+        TEST_P(   "stmplia      r",8, 16*4,"!, {r8-r15}")
+        TEST_P(   "stmia        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+        TEST_P(   "stmia        r",14,0,   "!, {pc}")
+
+        TEST_P(   "ldmia        r",0, 16*4,", {r0}")
+        TEST_BF_P("ldmvsia      r",4, 0,   ", {r0-r15}")
+        TEST_BF_P("ldmvcia      r",7, 8*4, "!, {r8-r15}")
+        TEST_P(   "ldmia        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+        TEST_BF_P("ldmia        r",14,15*4,"!, {pc}")
+
+        TEST_P(   "stmdb        r",0, 16*4,", {r0}")
+        TEST_P(   "stmhidb      r",4, 16*4,", {r0-r15}")
+        TEST_P(   "stmlsdb      r",8, 16*4,"!, {r8-r15}")
+        TEST_P(   "stmdb        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+        TEST_P(   "stmdb        r",13,4,   "!, {pc}")
+
+        TEST_P(   "ldmdb        r",0, 16*4,", {r0}")
+        TEST_BF_P("ldmgedb      r",4, 16*4,", {r0-r15}")
+        TEST_BF_P("ldmltdb      r",7, 16*4,"!, {r8-r15}")
+        TEST_P(   "ldmdb        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+        TEST_BF_P("ldmdb        r",14,16*4,"!, {pc}")
+
+        TEST_P(   "stmib        r",0, 16*4,", {r0}")
+        TEST_P(   "stmgtib      r",4, 16*4,", {r0-r15}")
+        TEST_P(   "stmleib      r",8, 16*4,"!, {r8-r15}")
+        TEST_P(   "stmib        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+        TEST_P(   "stmib        r",13,-4,  "!, {pc}")
+
+        TEST_P(   "ldmib        r",0, 16*4,", {r0}")
+        TEST_BF_P("ldmeqib      r",4, -4,", {r0-r15}")
+        TEST_BF_P("ldmneib      r",7, 7*4,"!, {r8-r15}")
+        TEST_P(   "ldmib        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+        TEST_BF_P("ldmib        r",14,14*4,"!, {pc}")
+
+        TEST_P(   "stmdb        r",13,16*4,"!, {r3-r12,lr}")
+        TEST_P(   "stmeqdb      r",13,16*4,"!, {r3-r12}")
+        TEST_P(   "stmnedb      r",2, 16*4,", {r3-r12,lr}")
+        TEST_P(   "stmdb        r",13,16*4,"!, {r2-r12,lr}")
+        TEST_P(   "stmdb        r",0, 16*4,", {r0-r12}")
+        TEST_P(   "stmdb        r",0, 16*4,", {r0-r12,lr}")
+
+        TEST_BF_P("ldmia        r",13,5*4, "!, {r3-r12,pc}")
+        TEST_P(   "ldmccia      r",13,5*4, "!, {r3-r12}")
+        TEST_BF_P("ldmcsia      r",2, 5*4, "!, {r3-r12,pc}")
+        TEST_BF_P("ldmia        r",13,4*4, "!, {r2-r12,pc}")
+        TEST_P(   "ldmia        r",0, 16*4,", {r0-r12}")
+        TEST_P(   "ldmia        r",0, 16*4,", {r0-r12,lr}")
+
+#ifdef CONFIG_THUMB2_KERNEL
+        TEST_ARM_TO_THUMB_INTERWORK_P("ldmplia  r",0,15*4,", {pc}")
+        TEST_ARM_TO_THUMB_INTERWORK_P("ldmmiia  r",13,0,", {r0-r15}")
+#endif
+        TEST_BF("b      2f")
+        TEST_BF("bl     2f")
+        TEST_BB("b      2b")
+        TEST_BB("bl     2b")
+
+        TEST_BF("beq    2f")
+        TEST_BF("bleq   2f")
+        TEST_BB("bne    2b")
+        TEST_BB("blne   2b")
+
+        TEST_BF("bgt    2f")
+        TEST_BF("blgt   2f")
+        TEST_BB("blt    2b")
+        TEST_BB("bllt   2b")
+
+        TEST_GROUP("Supervisor Call, and coprocessor instructions")
+
+        /*
+         * We can't really test these by executing them, so all
+         * we can do is check that probes are, or are not allowed.
+         * At the moment none are allowed...
+         */
+#define TEST_COPROCESSOR(code) TEST_UNSUPPORTED(code)
+
+#define COPROCESSOR_INSTRUCTIONS_ST_LD(two,cc)                                  \
+        TEST_COPROCESSOR("stc"two"      0, cr0, [r13, #4]")                     \
+        TEST_COPROCESSOR("stc"two"      0, cr0, [r13, #-4]")                    \
+        TEST_COPROCESSOR("stc"two"      0, cr0, [r13, #4]!")                    \
+        TEST_COPROCESSOR("stc"two"      0, cr0, [r13, #-4]!")                   \
+        TEST_COPROCESSOR("stc"two"      0, cr0, [r13], #4")                     \
+        TEST_COPROCESSOR("stc"two"      0, cr0, [r13], #-4")                    \
+        TEST_COPROCESSOR("stc"two"      0, cr0, [r13], {1}")                    \
+        TEST_COPROCESSOR("stc"two"l     0, cr0, [r13, #4]")                     \
+        TEST_COPROCESSOR("stc"two"l     0, cr0, [r13, #-4]")                    \
+        TEST_COPROCESSOR("stc"two"l     0, cr0, [r13, #4]!")                    \
+        TEST_COPROCESSOR("stc"two"l     0, cr0, [r13, #-4]!")                   \
+        TEST_COPROCESSOR("stc"two"l     0, cr0, [r13], #4")                     \
+        TEST_COPROCESSOR("stc"two"l     0, cr0, [r13], #-4")                    \
+        TEST_COPROCESSOR("stc"two"l     0, cr0, [r13], {1}")                    \
+        TEST_COPROCESSOR("ldc"two"      0, cr0, [r13, #4]")                     \
+        TEST_COPROCESSOR("ldc"two"      0, cr0, [r13, #-4]")                    \
+        TEST_COPROCESSOR("ldc"two"      0, cr0, [r13, #4]!")                    \
+        TEST_COPROCESSOR("ldc"two"      0, cr0, [r13, #-4]!")                   \
+        TEST_COPROCESSOR("ldc"two"      0, cr0, [r13], #4")                     \
+        TEST_COPROCESSOR("ldc"two"      0, cr0, [r13], #-4")                    \
+        TEST_COPROCESSOR("ldc"two"      0, cr0, [r13], {1}")                    \
+        TEST_COPROCESSOR("ldc"two"l     0, cr0, [r13, #4]")                     \
+        TEST_COPROCESSOR("ldc"two"l     0, cr0, [r13, #-4]")                    \
+        TEST_COPROCESSOR("ldc"two"l     0, cr0, [r13, #4]!")                    \
+        TEST_COPROCESSOR("ldc"two"l     0, cr0, [r13, #-4]!")                   \
+        TEST_COPROCESSOR("ldc"two"l     0, cr0, [r13], #4")                     \
+        TEST_COPROCESSOR("ldc"two"l     0, cr0, [r13], #-4")                    \
+        TEST_COPROCESSOR("ldc"two"l     0, cr0, [r13], {1}")                    \
+                                                                                \
+        TEST_COPROCESSOR( "stc"two"     0, cr0, [r15, #4]")                     \
+        TEST_COPROCESSOR( "stc"two"     0, cr0, [r15, #-4]")                    \
+        TEST_UNSUPPORTED(".word 0x"cc"daf0001   @ stc"two"      0, cr0, [r15, #4]!")    \
+        TEST_UNSUPPORTED(".word 0x"cc"d2f0001   @ stc"two"      0, cr0, [r15, #-4]!")   \
+        TEST_UNSUPPORTED(".word 0x"cc"caf0001   @ stc"two"      0, cr0, [r15], #4")     \
+        TEST_UNSUPPORTED(".word 0x"cc"c2f0001   @ stc"two"      0, cr0, [r15], #-4")    \
+        TEST_COPROCESSOR( "stc"two"     0, cr0, [r15], {1}")                    \
+        TEST_COPROCESSOR( "stc"two"l    0, cr0, [r15, #4]")                     \
+        TEST_COPROCESSOR( "stc"two"l    0, cr0, [r15, #-4]")                    \
+        TEST_UNSUPPORTED(".word 0x"cc"def0001   @ stc"two"l     0, cr0, [r15, #4]!")    \
+        TEST_UNSUPPORTED(".word 0x"cc"d6f0001   @ stc"two"l     0, cr0, [r15, #-4]!")   \
+        TEST_UNSUPPORTED(".word 0x"cc"cef0001   @ stc"two"l     0, cr0, [r15], #4")     \
+        TEST_UNSUPPORTED(".word 0x"cc"c6f0001   @ stc"two"l     0, cr0, [r15], #-4")    \
+        TEST_COPROCESSOR( "stc"two"l    0, cr0, [r15], {1}")                    \
+        TEST_COPROCESSOR( "ldc"two"     0, cr0, [r15, #4]")                     \
+        TEST_COPROCESSOR( "ldc"two"     0, cr0, [r15, #-4]")                    \
+        TEST_UNSUPPORTED(".word 0x"cc"dbf0001   @ ldc"two"      0, cr0, [r15, #4]!")    \
+        TEST_UNSUPPORTED(".word 0x"cc"d3f0001   @ ldc"two"      0, cr0, [r15, #-4]!")   \
+        TEST_UNSUPPORTED(".word 0x"cc"cbf0001   @ ldc"two"      0, cr0, [r15], #4")     \
+        TEST_UNSUPPORTED(".word 0x"cc"c3f0001   @ ldc"two"      0, cr0, [r15], #-4")    \
+        TEST_COPROCESSOR( "ldc"two"     0, cr0, [r15], {1}")                    \
+        TEST_COPROCESSOR( "ldc"two"l    0, cr0, [r15, #4]")                     \
+        TEST_COPROCESSOR( "ldc"two"l    0, cr0, [r15, #-4]")                    \
+        TEST_UNSUPPORTED(".word 0x"cc"dff0001   @ ldc"two"l     0, cr0, [r15, #4]!")    \
+        TEST_UNSUPPORTED(".word 0x"cc"d7f0001   @ ldc"two"l     0, cr0, [r15, #-4]!")   \
+        TEST_UNSUPPORTED(".word 0x"cc"cff0001   @ ldc"two"l     0, cr0, [r15], #4")     \
+        TEST_UNSUPPORTED(".word 0x"cc"c7f0001   @ ldc"two"l     0, cr0, [r15], #-4")    \
+        TEST_COPROCESSOR( "ldc"two"l    0, cr0, [r15], {1}")
+
+#define COPROCESSOR_INSTRUCTIONS_MC_MR(two,cc)                                  \
+                                                                                \
+        TEST_COPROCESSOR( "mcrr"two"    0, 15, r0, r14, cr0")                   \
+        TEST_COPROCESSOR( "mcrr"two"    15, 0, r14, r0, cr15")                  \
+        TEST_UNSUPPORTED(".word 0x"cc"c4f00f0   @ mcrr"two"     0, 15, r0, r15, cr0")   \
+        TEST_UNSUPPORTED(".word 0x"cc"c40ff0f   @ mcrr"two"     15, 0, r15, r0, cr15")  \
+        TEST_COPROCESSOR( "mrrc"two"    0, 15, r0, r14, cr0")                   \
+        TEST_COPROCESSOR( "mrrc"two"    15, 0, r14, r0, cr15")                  \
+        TEST_UNSUPPORTED(".word 0x"cc"c5f00f0   @ mrrc"two"     0, 15, r0, r15, cr0")   \
+        TEST_UNSUPPORTED(".word 0x"cc"c50ff0f   @ mrrc"two"     15, 0, r15, r0, cr15")  \
+        TEST_COPROCESSOR( "cdp"two"     15, 15, cr15, cr15, cr15, 7")           \
+        TEST_COPROCESSOR( "cdp"two"     0, 0, cr0, cr0, cr0, 0")                \
+        TEST_COPROCESSOR( "mcr"two"     15, 7, r15, cr15, cr15, 7")             \
+        TEST_COPROCESSOR( "mcr"two"     0, 0, r0, cr0, cr0, 0")                 \
+        TEST_COPROCESSOR( "mrc"two"     15, 7, r15, cr15, cr15, 7")             \
+        TEST_COPROCESSOR( "mrc"two"     0, 0, r0, cr0, cr0, 0")
+
+        COPROCESSOR_INSTRUCTIONS_ST_LD("","e")
+        COPROCESSOR_INSTRUCTIONS_MC_MR("","e")
+        TEST_UNSUPPORTED("svc   0")
+        TEST_UNSUPPORTED("svc   0xffffff")
+
+        TEST_UNSUPPORTED("svc   0")
+
+        TEST_GROUP("Unconditional instruction")
+
+#if __LINUX_ARM_ARCH__ >= 6
+        TEST_UNSUPPORTED("srsda sp, 0x13")
+        TEST_UNSUPPORTED("srsdb sp, 0x13")
+        TEST_UNSUPPORTED("srsia sp, 0x13")
+        TEST_UNSUPPORTED("srsib sp, 0x13")
+        TEST_UNSUPPORTED("srsda sp!, 0x13")
+        TEST_UNSUPPORTED("srsdb sp!, 0x13")
+        TEST_UNSUPPORTED("srsia sp!, 0x13")
+        TEST_UNSUPPORTED("srsib sp!, 0x13")
+
+        TEST_UNSUPPORTED("rfeda sp")
+        TEST_UNSUPPORTED("rfedb sp")
+        TEST_UNSUPPORTED("rfeia sp")
+        TEST_UNSUPPORTED("rfeib sp")
+        TEST_UNSUPPORTED("rfeda sp!")
+        TEST_UNSUPPORTED("rfedb sp!")
+        TEST_UNSUPPORTED("rfeia sp!")
+        TEST_UNSUPPORTED("rfeib sp!")
+        TEST_UNSUPPORTED(".word 0xf81d0a00      @ rfeda pc")
+        TEST_UNSUPPORTED(".word 0xf91d0a00      @ rfedb pc")
+        TEST_UNSUPPORTED(".word 0xf89d0a00      @ rfeia pc")
+        TEST_UNSUPPORTED(".word 0xf99d0a00      @ rfeib pc")
+        TEST_UNSUPPORTED(".word 0xf83d0a00      @ rfeda pc!")
+        TEST_UNSUPPORTED(".word 0xf93d0a00      @ rfedb pc!")
+        TEST_UNSUPPORTED(".word 0xf8bd0a00      @ rfeia pc!")
+        TEST_UNSUPPORTED(".word 0xf9bd0a00      @ rfeib pc!")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+        TEST_X( "blx    __dummy_thumb_subroutine_even",
+                ".thumb                         \n\t"
+                ".space 4                       \n\t"
+                ".type __dummy_thumb_subroutine_even, %%function \n\t"
+                "__dummy_thumb_subroutine_even: \n\t"
+                "mov    r0, pc                  \n\t"
+                "bx     lr                      \n\t"
+                ".arm                           \n\t"
+        )
+        TEST(   "blx    __dummy_thumb_subroutine_even")
+
+        TEST_X( "blx    __dummy_thumb_subroutine_odd",
+                ".thumb                         \n\t"
+                ".space 2                       \n\t"
+                ".type __dummy_thumb_subroutine_odd, %%function \n\t"
+                "__dummy_thumb_subroutine_odd:  \n\t"
+                "mov    r0, pc                  \n\t"
+                "bx     lr                      \n\t"
+                ".arm                           \n\t"
+        )
+        TEST(   "blx    __dummy_thumb_subroutine_odd")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+        COPROCESSOR_INSTRUCTIONS_ST_LD("2","f")
+#if __LINUX_ARM_ARCH__ >= 6
+        COPROCESSOR_INSTRUCTIONS_MC_MR("2","f")
+#endif
+
+        TEST_GROUP("Miscellaneous instructions, memory hints, and Advanced SIMD instructions")
+
+#if __LINUX_ARM_ARCH__ >= 6
+        TEST_UNSUPPORTED("cps   0x13")
+        TEST_UNSUPPORTED("cpsie i")
+        TEST_UNSUPPORTED("cpsid i")
+        TEST_UNSUPPORTED("cpsie i,0x13")
+        TEST_UNSUPPORTED("cpsid i,0x13")
+        TEST_UNSUPPORTED("setend        le")
+        TEST_UNSUPPORTED("setend        be")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+        TEST_P("pli     [r",0,0b,", #16]")
+        TEST(  "pli     [pc, #0]")
+        TEST_RR("pli    [r",12,0b,", r",0, 16,"]")
+        TEST_RR("pli    [r",0, 0b,", -r",12,16,", lsl #4]")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 5
+        TEST_P("pld     [r",0,32,", #-16]")
+        TEST(  "pld     [pc, #0]")
+        TEST_PR("pld    [r",7, 24, ", r",0, 16,"]")
+        TEST_PR("pld    [r",8, 24, ", -r",12,16,", lsl #4]")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+        TEST_SUPPORTED(  ".word 0xf590f000      @ pldw [r0, #0]")
+        TEST_SUPPORTED(  ".word 0xf797f000      @ pldw  [r7, r0]")
+        TEST_SUPPORTED(  ".word 0xf798f18c      @ pldw  [r8, r12, lsl #3]");
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+        TEST_UNSUPPORTED("clrex")
+        TEST_UNSUPPORTED("dsb")
+        TEST_UNSUPPORTED("dmb")
+        TEST_UNSUPPORTED("isb")
+#endif
+
+        verbose("\n");
+}
+
diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c
new file mode 100644
index 000000000000..5e726c31c45a
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-thumb.c
@@ -0,0 +1,1187 @@
+/*
+ * arch/arm/kernel/kprobes-test-thumb.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "16"
+
+#define DONT_TEST_IN_ITBLOCK(tests)                     \
+        kprobe_test_flags |= TEST_FLAG_NO_ITBLOCK;      \
+        tests                                           \
+        kprobe_test_flags &= ~TEST_FLAG_NO_ITBLOCK;
+
+#define CONDITION_INSTRUCTIONS(cc_pos, tests)           \
+        kprobe_test_cc_position = cc_pos;               \
+        DONT_TEST_IN_ITBLOCK(tests)                     \
+        kprobe_test_cc_position = 0;
+
+#define TEST_ITBLOCK(code)                              \
+        kprobe_test_flags |= TEST_FLAG_FULL_ITBLOCK;    \
+        TESTCASE_START(code)                            \
+        TEST_ARG_END("")                                \
+        "50:    nop                     \n\t"           \
+        "1:     "code"                  \n\t"           \
+        "       mov r1, #0x11           \n\t"           \
+        "       mov r2, #0x22           \n\t"           \
+        "       mov r3, #0x33           \n\t"           \
+        "2:     nop                     \n\t"           \
+        TESTCASE_END                                    \
+        kprobe_test_flags &= ~TEST_FLAG_FULL_ITBLOCK;
+
+#define TEST_THUMB_TO_ARM_INTERWORK_P(code1, reg, val, code2)   \
+        TESTCASE_START(code1 #reg code2)                        \
+        TEST_ARG_PTR(reg, val)                                  \
+        TEST_ARG_REG(14, 99f+1)                                 \
+        TEST_ARG_MEM(15, 3f)                                    \
+        TEST_ARG_END("")                                        \
+        "       nop                     \n\t" /* To align 1f */ \
+        "50:    nop                     \n\t"                   \
+        "1:     "code1 #reg code2"      \n\t"                   \
+        "       bx      lr              \n\t"                   \
+        ".arm                           \n\t"                   \
+        "3:     adr     lr, 2f+1        \n\t"                   \
+        "       bx      lr              \n\t"                   \
+        ".thumb                         \n\t"                   \
+        "2:     nop                     \n\t"                   \
+        TESTCASE_END
+
+
+void kprobe_thumb16_test_cases(void)
+{
+        kprobe_test_flags = TEST_FLAG_NARROW_INSTR;
+
+        TEST_GROUP("Shift (immediate), add, subtract, move, and compare")
+
+        TEST_R(    "lsls        r7, r",0,VAL1,", #5")
+        TEST_R(    "lsls        r0, r",7,VAL2,", #11")
+        TEST_R(    "lsrs        r7, r",0,VAL1,", #5")
+        TEST_R(    "lsrs        r0, r",7,VAL2,", #11")
+        TEST_R(    "asrs        r7, r",0,VAL1,", #5")
+        TEST_R(    "asrs        r0, r",7,VAL2,", #11")
+        TEST_RR(   "adds        r2, r",0,VAL1,", r",7,VAL2,"")
+        TEST_RR(   "adds        r5, r",7,VAL2,", r",0,VAL2,"")
+        TEST_RR(   "subs        r2, r",0,VAL1,", r",7,VAL2,"")
+        TEST_RR(   "subs        r5, r",7,VAL2,", r",0,VAL2,"")
+        TEST_R(    "adds        r7, r",0,VAL1,", #5")
+        TEST_R(    "adds        r0, r",7,VAL2,", #2")
+        TEST_R(    "subs        r7, r",0,VAL1,", #5")
+        TEST_R(    "subs        r0, r",7,VAL2,", #2")
+        TEST(      "movs.n      r0, #0x5f")
+        TEST(      "movs.n      r7, #0xa0")
+        TEST_R(    "cmp.n       r",0,0x5e, ", #0x5f")
+        TEST_R(    "cmp.n       r",5,0x15f,", #0x5f")
+        TEST_R(    "cmp.n       r",7,0xa0, ", #0xa0")
+        TEST_R(    "adds.n      r",0,VAL1,", #0x5f")
+        TEST_R(    "adds.n      r",7,VAL2,", #0xa0")
+        TEST_R(    "subs.n      r",0,VAL1,", #0x5f")
+        TEST_R(    "subs.n      r",7,VAL2,", #0xa0")
+
+        TEST_GROUP("16-bit Thumb data-processing instructions")
+
+#define DATA_PROCESSING16(op,val)                       \
+        TEST_RR(   op"  r",0,VAL1,", r",7,val,"")       \
+        TEST_RR(   op"  r",7,VAL2,", r",0,val,"")
+
+        DATA_PROCESSING16("ands",0xf00f00ff)
+        DATA_PROCESSING16("eors",0xf00f00ff)
+        DATA_PROCESSING16("lsls",11)
+        DATA_PROCESSING16("lsrs",11)
+        DATA_PROCESSING16("asrs",11)
+        DATA_PROCESSING16("adcs",VAL2)
+        DATA_PROCESSING16("sbcs",VAL2)
+        DATA_PROCESSING16("rors",11)
+        DATA_PROCESSING16("tst",0xf00f00ff)
+        TEST_R("rsbs    r",0,VAL1,", #0")
+        TEST_R("rsbs    r",7,VAL2,", #0")
+        DATA_PROCESSING16("cmp",0xf00f00ff)
+        DATA_PROCESSING16("cmn",0xf00f00ff)
+        DATA_PROCESSING16("orrs",0xf00f00ff)
+        DATA_PROCESSING16("muls",VAL2)
+        DATA_PROCESSING16("bics",0xf00f00ff)
+        DATA_PROCESSING16("mvns",VAL2)
+
+        TEST_GROUP("Special data instructions and branch and exchange")
+
+        TEST_RR(  "add  r",0, VAL1,", r",7,VAL2,"")
+        TEST_RR(  "add  r",3, VAL2,", r",8,VAL3,"")
+        TEST_RR(  "add  r",8, VAL3,", r",0,VAL1,"")
+        TEST_R(   "add  sp"        ", r",8,-8,  "")
+        TEST_R(   "add  r",14,VAL1,", pc")
+        TEST_BF_R("add  pc"        ", r",0,2f-1f-8,"")
+        TEST_UNSUPPORTED(".short 0x44ff @ add pc, pc")
+
+        TEST_RR(  "cmp  r",3,VAL1,", r",8,VAL2,"")
+        TEST_RR(  "cmp  r",8,VAL2,", r",0,VAL1,"")
+        TEST_R(   "cmp  sp"       ", r",8,-8,  "")
+
+        TEST_R(   "mov  r0, r",7,VAL2,"")
+        TEST_R(   "mov  r3, r",8,VAL3,"")
+        TEST_R(   "mov  r8, r",0,VAL1,"")
+        TEST_P(   "mov  sp, r",8,-8,  "")
+        TEST(     "mov  lr, pc")
+        TEST_BF_R("mov  pc, r",0,2f,  "")
+
+        TEST_BF_R("bx   r",0, 2f+1,"")
+        TEST_BF_R("bx   r",14,2f+1,"")
+        TESTCASE_START("bx      pc")
+                TEST_ARG_REG(14, 99f+1)
+                TEST_ARG_END("")
+                "       nop                     \n\t" /* To align the bx pc*/
+                "50:    nop                     \n\t"
+                "1:     bx      pc              \n\t"
+                "       bx      lr              \n\t"
+                ".arm                           \n\t"
+                "       adr     lr, 2f+1        \n\t"
+                "       bx      lr              \n\t"
+                ".thumb                         \n\t"
+                "2:     nop                     \n\t"
+        TESTCASE_END
+
+        TEST_BF_R("blx  r",0, 2f+1,"")
+        TEST_BB_R("blx  r",14,2f+1,"")
+        TEST_UNSUPPORTED(".short 0x47f8 @ blx pc")
+
+        TEST_GROUP("Load from Literal Pool")
+
+        TEST_X( "ldr    r0, 3f",
+                ".align                                 \n\t"
+                "3:     .word   "__stringify(VAL1))
+        TEST_X( "ldr    r7, 3f",
+                ".space 128                             \n\t"
+                ".align                                 \n\t"
+                "3:     .word   "__stringify(VAL2))
+
+        TEST_GROUP("16-bit Thumb Load/store instructions")
+
+        TEST_RPR("str   r",0, VAL1,", [r",1, 24,", r",2,  48,"]")
+        TEST_RPR("str   r",7, VAL2,", [r",6, 24,", r",5,  48,"]")
+        TEST_RPR("strh  r",0, VAL1,", [r",1, 24,", r",2,  48,"]")
+        TEST_RPR("strh  r",7, VAL2,", [r",6, 24,", r",5,  48,"]")
+        TEST_RPR("strb  r",0, VAL1,", [r",1, 24,", r",2,  48,"]")
+        TEST_RPR("strb  r",7, VAL2,", [r",6, 24,", r",5,  48,"]")
+        TEST_PR( "ldrsb r0, [r",1, 24,", r",2,  48,"]")
+        TEST_PR( "ldrsb r7, [r",6, 24,", r",5,  50,"]")
+        TEST_PR( "ldr   r0, [r",1, 24,", r",2,  48,"]")
+        TEST_PR( "ldr   r7, [r",6, 24,", r",5,  48,"]")
+        TEST_PR( "ldrh  r0, [r",1, 24,", r",2,  48,"]")
+        TEST_PR( "ldrh  r7, [r",6, 24,", r",5,  50,"]")
+        TEST_PR( "ldrb  r0, [r",1, 24,", r",2,  48,"]")
+        TEST_PR( "ldrb  r7, [r",6, 24,", r",5,  50,"]")
+        TEST_PR( "ldrsh r0, [r",1, 24,", r",2,  48,"]")
+        TEST_PR( "ldrsh r7, [r",6, 24,", r",5,  50,"]")
+
+        TEST_RP("str    r",0, VAL1,", [r",1, 24,", #120]")
+        TEST_RP("str    r",7, VAL2,", [r",6, 24,", #120]")
+        TEST_P( "ldr    r0, [r",1, 24,", #120]")
+        TEST_P( "ldr    r7, [r",6, 24,", #120]")
+        TEST_RP("strb   r",0, VAL1,", [r",1, 24,", #30]")
+        TEST_RP("strb   r",7, VAL2,", [r",6, 24,", #30]")
+        TEST_P( "ldrb   r0, [r",1, 24,", #30]")
+        TEST_P( "ldrb   r7, [r",6, 24,", #30]")
+        TEST_RP("strh   r",0, VAL1,", [r",1, 24,", #60]")
+        TEST_RP("strh   r",7, VAL2,", [r",6, 24,", #60]")
+        TEST_P( "ldrh   r0, [r",1, 24,", #60]")
+        TEST_P( "ldrh   r7, [r",6, 24,", #60]")
+
+        TEST_R( "str    r",0, VAL1,", [sp, #0]")
+        TEST_R( "str    r",7, VAL2,", [sp, #160]")
+        TEST(   "ldr    r0, [sp, #0]")
+        TEST(   "ldr    r7, [sp, #160]")
+
+        TEST_RP("str    r",0, VAL1,", [r",0, 24,"]")
+        TEST_P( "ldr    r0, [r",0, 24,"]")
+
+        TEST_GROUP("Generate PC-/SP-relative address")
+
+        TEST("add       r0, pc, #4")
+        TEST("add       r7, pc, #1020")
+        TEST("add       r0, sp, #4")
+        TEST("add       r7, sp, #1020")
+
+        TEST_GROUP("Miscellaneous 16-bit instructions")
+
+        TEST_UNSUPPORTED( "cpsie        i")
+        TEST_UNSUPPORTED( "cpsid        i")
+        TEST_UNSUPPORTED( "setend       le")
+        TEST_UNSUPPORTED( "setend       be")
+
+        TEST("add       sp, #"__stringify(TEST_MEMORY_SIZE)) /* Assumes TEST_MEMORY_SIZE < 0x400 */
+        TEST("sub       sp, #0x7f*4")
+
+DONT_TEST_IN_ITBLOCK(
+        TEST_BF_R(  "cbnz       r",0,0, ", 2f")
+        TEST_BF_R(  "cbz        r",2,-1,", 2f")
+        TEST_BF_RX( "cbnz       r",4,1, ", 2f",0x20)
+        TEST_BF_RX( "cbz        r",7,0, ", 2f",0x40)
+)
+        TEST_R("sxth    r0, r",7, HH1,"")
+        TEST_R("sxth    r7, r",0, HH2,"")
+        TEST_R("sxtb    r0, r",7, HH1,"")
+        TEST_R("sxtb    r7, r",0, HH2,"")
+        TEST_R("uxth    r0, r",7, HH1,"")
+        TEST_R("uxth    r7, r",0, HH2,"")
+        TEST_R("uxtb    r0, r",7, HH1,"")
+        TEST_R("uxtb    r7, r",0, HH2,"")
+        TEST_R("rev     r0, r",7, VAL1,"")
+        TEST_R("rev     r7, r",0, VAL2,"")
+        TEST_R("rev16   r0, r",7, VAL1,"")
+        TEST_R("rev16   r7, r",0, VAL2,"")
+        TEST_UNSUPPORTED(".short 0xba80")
+        TEST_UNSUPPORTED(".short 0xbabf")
+        TEST_R("revsh   r0, r",7, VAL1,"")
+        TEST_R("revsh   r7, r",0, VAL2,"")
+
+#define TEST_POPPC(code, offset)        \
+        TESTCASE_START(code)            \
+        TEST_ARG_PTR(13, offset)        \
+        TEST_ARG_END("")                \
+        TEST_BRANCH_F(code,0)           \
+        TESTCASE_END
+
+        TEST("push      {r0}")
+        TEST("push      {r7}")
+        TEST("push      {r14}")
+        TEST("push      {r0-r7,r14}")
+        TEST("push      {r0,r2,r4,r6,r14}")
+        TEST("push      {r1,r3,r5,r7}")
+        TEST("pop       {r0}")
+        TEST("pop       {r7}")
+        TEST("pop       {r0,r2,r4,r6}")
+        TEST_POPPC("pop {pc}",15*4)
+        TEST_POPPC("pop {r0-r7,pc}",7*4)
+        TEST_POPPC("pop {r1,r3,r5,r7,pc}",11*4)
+        TEST_THUMB_TO_ARM_INTERWORK_P("pop      {pc}    @ ",13,15*4,"")
+        TEST_THUMB_TO_ARM_INTERWORK_P("pop      {r0-r7,pc}      @ ",13,7*4,"")
+
+        TEST_UNSUPPORTED("bkpt.n        0")
+        TEST_UNSUPPORTED("bkpt.n        255")
+
+        TEST_SUPPORTED("yield")
+        TEST("sev")
+        TEST("nop")
+        TEST("wfi")
+        TEST_SUPPORTED("wfe")
+        TEST_UNSUPPORTED(".short 0xbf50") /* Unassigned hints */
+        TEST_UNSUPPORTED(".short 0xbff0") /* Unassigned hints */
+
+#define TEST_IT(code, code2)                    \
+        TESTCASE_START(code)                    \
+        TEST_ARG_END("")                        \
+        "50:    nop                     \n\t"   \
+        "1:     "code"                  \n\t"   \
+        "       "code2"                 \n\t"   \
+        "2:     nop                     \n\t"   \
+        TESTCASE_END
+
+DONT_TEST_IN_ITBLOCK(
+        TEST_IT("it     eq","moveq r0,#0")
+        TEST_IT("it     vc","movvc r0,#0")
+        TEST_IT("it     le","movle r0,#0")
+        TEST_IT("ite    eq","moveq r0,#0\n\t  movne r1,#1")
+        TEST_IT("itet   vc","movvc r0,#0\n\t  movvs r1,#1\n\t  movvc r2,#2")
+        TEST_IT("itete  le","movle r0,#0\n\t  movgt r1,#1\n\t  movle r2,#2\n\t  movgt r3,#3")
+        TEST_IT("itttt  le","movle r0,#0\n\t  movle r1,#1\n\t  movle r2,#2\n\t  movle r3,#3")
+        TEST_IT("iteee  le","movle r0,#0\n\t  movgt r1,#1\n\t  movgt r2,#2\n\t  movgt r3,#3")
+)
+
+        TEST_GROUP("Load and store multiple")
+
+        TEST_P("ldmia   r",4, 16*4,"!, {r0,r7}")
+        TEST_P("ldmia   r",7, 16*4,"!, {r0-r6}")
+        TEST_P("stmia   r",4, 16*4,"!, {r0,r7}")
+        TEST_P("stmia   r",0, 16*4,"!, {r0-r7}")
+
+        TEST_GROUP("Conditional branch and Supervisor Call instructions")
+
+CONDITION_INSTRUCTIONS(8,
+        TEST_BF("beq    2f")
+        TEST_BB("bne    2b")
+        TEST_BF("bgt    2f")
+        TEST_BB("blt    2b")
+)
+        TEST_UNSUPPORTED(".short 0xde00")
+        TEST_UNSUPPORTED(".short 0xdeff")
+        TEST_UNSUPPORTED("svc   #0x00")
+        TEST_UNSUPPORTED("svc   #0xff")
+
+        TEST_GROUP("Unconditional branch")
+
+        TEST_BF(  "b    2f")
+        TEST_BB(  "b    2b")
+        TEST_BF_X("b    2f", 0x400)
+        TEST_BB_X("b    2b", 0x400)
+
+        TEST_GROUP("Testing instructions in IT blocks")
+
+        TEST_ITBLOCK("subs.n r0, r0")
+
+        verbose("\n");
+}
+
+
+void kprobe_thumb32_test_cases(void)
+{
+        kprobe_test_flags = 0;
+
+        TEST_GROUP("Load/store multiple")
+
+        TEST_UNSUPPORTED("rfedb sp")
+        TEST_UNSUPPORTED("rfeia sp")
+        TEST_UNSUPPORTED("rfedb sp!")
+        TEST_UNSUPPORTED("rfeia sp!")
+
+        TEST_P(   "stmia        r",0, 16*4,", {r0,r8}")
+        TEST_P(   "stmia        r",4, 16*4,", {r0-r12,r14}")
+        TEST_P(   "stmia        r",7, 16*4,"!, {r8-r12,r14}")
+        TEST_P(   "stmia        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+
+        TEST_P(   "ldmia        r",0, 16*4,", {r0,r8}")
+        TEST_P(   "ldmia        r",4, 0,   ", {r0-r12,r14}")
+        TEST_BF_P("ldmia        r",5, 8*4, "!, {r6-r12,r15}")
+        TEST_P(   "ldmia        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+        TEST_BF_P("ldmia        r",14,14*4,"!, {r4,pc}")
+
+        TEST_P(   "stmdb        r",0, 16*4,", {r0,r8}")
+        TEST_P(   "stmdb        r",4, 16*4,", {r0-r12,r14}")
+        TEST_P(   "stmdb        r",5, 16*4,"!, {r8-r12,r14}")
+        TEST_P(   "stmdb        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+
+        TEST_P(   "ldmdb        r",0, 16*4,", {r0,r8}")
+        TEST_P(   "ldmdb        r",4, 16*4,", {r0-r12,r14}")
+        TEST_BF_P("ldmdb        r",5, 16*4,"!, {r6-r12,r15}")
+        TEST_P(   "ldmdb        r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+        TEST_BF_P("ldmdb        r",14,16*4,"!, {r4,pc}")
+
+        TEST_P(   "stmdb        r",13,16*4,"!, {r3-r12,lr}")
+        TEST_P(   "stmdb        r",13,16*4,"!, {r3-r12}")
+        TEST_P(   "stmdb        r",2, 16*4,", {r3-r12,lr}")
+        TEST_P(   "stmdb        r",13,16*4,"!, {r2-r12,lr}")
+        TEST_P(   "stmdb        r",0, 16*4,", {r0-r12}")
+        TEST_P(   "stmdb        r",0, 16*4,", {r0-r12,lr}")
+
+        TEST_BF_P("ldmia        r",13,5*4, "!, {r3-r12,pc}")
+        TEST_P(   "ldmia        r",13,5*4, "!, {r3-r12}")
+        TEST_BF_P("ldmia        r",2, 5*4, "!, {r3-r12,pc}")
+        TEST_BF_P("ldmia        r",13,4*4, "!, {r2-r12,pc}")
+        TEST_P(   "ldmia        r",0, 16*4,", {r0-r12}")
+        TEST_P(   "ldmia        r",0, 16*4,", {r0-r12,lr}")
+
+        TEST_THUMB_TO_ARM_INTERWORK_P("ldmia    r",0,14*4,", {r12,pc}")
+        TEST_THUMB_TO_ARM_INTERWORK_P("ldmia    r",13,2*4,", {r0-r12,pc}")
+
+        TEST_UNSUPPORTED(".short 0xe88f,0x0101  @ stmia pc, {r0,r8}")
+        TEST_UNSUPPORTED(".short 0xe92f,0x5f00  @ stmdb pc!, {r8-r12,r14}")
+        TEST_UNSUPPORTED(".short 0xe8bd,0xc000  @ ldmia r13!, {r14,pc}")
+        TEST_UNSUPPORTED(".short 0xe93e,0xc000  @ ldmdb r14!, {r14,pc}")
+        TEST_UNSUPPORTED(".short 0xe8a7,0x3f00  @ stmia r7!, {r8-r12,sp}")
+        TEST_UNSUPPORTED(".short 0xe8a7,0x9f00  @ stmia r7!, {r8-r12,pc}")
+        TEST_UNSUPPORTED(".short 0xe93e,0x2010  @ ldmdb r14!, {r4,sp}")
+
+        TEST_GROUP("Load/store double or exclusive, table branch")
+
+        TEST_P(  "ldrd  r0, r1, [r",1, 24,", #-16]")
+        TEST(    "ldrd  r12, r14, [sp, #16]")
+        TEST_P(  "ldrd  r1, r0, [r",7, 24,", #-16]!")
+        TEST(    "ldrd  r14, r12, [sp, #16]!")
+        TEST_P(  "ldrd  r1, r0, [r",7, 24,"], #16")
+        TEST(    "ldrd  r7, r8, [sp], #-16")
+
+        TEST_X( "ldrd   r12, r14, 3f",
+                ".align 3                               \n\t"
+                "3:     .word   "__stringify(VAL1)"     \n\t"
+                "       .word   "__stringify(VAL2))
+
+        TEST_UNSUPPORTED(".short 0xe9ff,0xec04  @ ldrd  r14, r12, [pc, #16]!")
+        TEST_UNSUPPORTED(".short 0xe8ff,0xec04  @ ldrd  r14, r12, [pc], #16")
+        TEST_UNSUPPORTED(".short 0xe9d4,0xd800  @ ldrd  sp, r8, [r4]")
+        TEST_UNSUPPORTED(".short 0xe9d4,0xf800  @ ldrd  pc, r8, [r4]")
+        TEST_UNSUPPORTED(".short 0xe9d4,0x7d00  @ ldrd  r7, sp, [r4]")
+        TEST_UNSUPPORTED(".short 0xe9d4,0x7f00  @ ldrd  r7, pc, [r4]")
+
+        TEST_RRP("strd  r",0, VAL1,", r",1, VAL2,", [r",1, 24,", #-16]")
+        TEST_RR( "strd  r",12,VAL2,", r",14,VAL1,", [sp, #16]")
+        TEST_RRP("strd  r",1, VAL1,", r",0, VAL2,", [r",7, 24,", #-16]!")
+        TEST_RR( "strd  r",14,VAL2,", r",12,VAL1,", [sp, #16]!")
+        TEST_RRP("strd  r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16")
+        TEST_RR( "strd  r",7, VAL2,", r",8, VAL1,", [sp], #-16")
+        TEST_UNSUPPORTED(".short 0xe9ef,0xec04  @ strd  r14, r12, [pc, #16]!")
+        TEST_UNSUPPORTED(".short 0xe8ef,0xec04  @ strd  r14, r12, [pc], #16")
+
+        TEST_RX("tbb    [pc, r",0, (9f-(1f+4)),"]",
+                "9:                     \n\t"
+                ".byte  (2f-1b-4)>>1    \n\t"
+                ".byte  (3f-1b-4)>>1    \n\t"
+                "3:     mvn     r0, r0  \n\t"
+                "2:     nop             \n\t")
+
+        TEST_RX("tbb    [pc, r",4, (9f-(1f+4)+1),"]",
+                "9:                     \n\t"
+                ".byte  (2f-1b-4)>>1    \n\t"
+                ".byte  (3f-1b-4)>>1    \n\t"
+                "3:     mvn     r0, r0  \n\t"
+                "2:     nop             \n\t")
+
+        TEST_RRX("tbb   [r",1,9f,", r",2,0,"]",
+                "9:                     \n\t"
+                ".byte  (2f-1b-4)>>1    \n\t"
+                ".byte  (3f-1b-4)>>1    \n\t"
+                "3:     mvn     r0, r0  \n\t"
+                "2:     nop             \n\t")
+
+        TEST_RX("tbh    [pc, r",7, (9f-(1f+4))>>1,"]",
+                "9:                     \n\t"
+                ".short (2f-1b-4)>>1    \n\t"
+                ".short (3f-1b-4)>>1    \n\t"
+                "3:     mvn     r0, r0  \n\t"
+                "2:     nop             \n\t")
+
+        TEST_RX("tbh    [pc, r",12, ((9f-(1f+4))>>1)+1,"]",
+                "9:                     \n\t"
+                ".short (2f-1b-4)>>1    \n\t"
+                ".short (3f-1b-4)>>1    \n\t"
+                "3:     mvn     r0, r0  \n\t"
+                "2:     nop             \n\t")
+
+        TEST_RRX("tbh   [r",1,9f, ", r",14,1,"]",
+                "9:                     \n\t"
+                ".short (2f-1b-4)>>1    \n\t"
+                ".short (3f-1b-4)>>1    \n\t"
+                "3:     mvn     r0, r0  \n\t"
+                "2:     nop             \n\t")
+
+        TEST_UNSUPPORTED(".short 0xe8d1,0xf01f  @ tbh [r1, pc]")
+        TEST_UNSUPPORTED(".short 0xe8d1,0xf01d  @ tbh [r1, sp]")
+        TEST_UNSUPPORTED(".short 0xe8dd,0xf012  @ tbh [sp, r2]")
+
+        TEST_UNSUPPORTED("strexb        r0, r1, [r2]")
+        TEST_UNSUPPORTED("strexh        r0, r1, [r2]")
+        TEST_UNSUPPORTED("strexd        r0, r1, [r2]")
+        TEST_UNSUPPORTED("ldrexb        r0, [r1]")
+        TEST_UNSUPPORTED("ldrexh        r0, [r1]")
+        TEST_UNSUPPORTED("ldrexd        r0, [r1]")
+
+        TEST_GROUP("Data-processing (shifted register) and (modified immediate)")
+
+#define _DATA_PROCESSING32_DNM(op,s,val)                                        \
+        TEST_RR(op s".w r0,  r",1, VAL1,", r",2, val, "")                       \
+        TEST_RR(op s"   r1,  r",1, VAL1,", r",2, val, ", lsl #3")               \
+        TEST_RR(op s"   r2,  r",3, VAL1,", r",2, val, ", lsr #4")               \
+        TEST_RR(op s"   r3,  r",3, VAL1,", r",2, val, ", asr #5")               \
+        TEST_RR(op s"   r4,  r",5, VAL1,", r",2, N(val),", asr #6")             \
+        TEST_RR(op s"   r5,  r",5, VAL1,", r",2, val, ", ror #7")               \
+        TEST_RR(op s"   r8,  r",9, VAL1,", r",10,val, ", rrx")                  \
+        TEST_R( op s"   r0,  r",11,VAL1,", #0x00010001")                        \
+        TEST_R( op s"   r11, r",0, VAL1,", #0xf5000000")                        \
+        TEST_R( op s"   r7,  r",8, VAL2,", #0x000af000")
+
+#define DATA_PROCESSING32_DNM(op,val)           \
+        _DATA_PROCESSING32_DNM(op,"",val)       \
+        _DATA_PROCESSING32_DNM(op,"s",val)
+
+#define DATA_PROCESSING32_NM(op,val)                                    \
+        TEST_RR(op".w   r",1, VAL1,", r",2, val, "")                    \
+        TEST_RR(op"     r",1, VAL1,", r",2, val, ", lsl #3")            \
+        TEST_RR(op"     r",3, VAL1,", r",2, val, ", lsr #4")            \
+        TEST_RR(op"     r",3, VAL1,", r",2, val, ", asr #5")            \
+        TEST_RR(op"     r",5, VAL1,", r",2, N(val),", asr #6")          \
+        TEST_RR(op"     r",5, VAL1,", r",2, val, ", ror #7")            \
+        TEST_RR(op"     r",9, VAL1,", r",10,val, ", rrx")               \
+        TEST_R( op"     r",11,VAL1,", #0x00010001")                     \
+        TEST_R( op"     r",0, VAL1,", #0xf5000000")                     \
+        TEST_R( op"     r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING32_DM(op,s,val)                         \
+        TEST_R( op s".w r0,  r",14, val, "")                    \
+        TEST_R( op s"   r1,  r",12, val, ", lsl #3")            \
+        TEST_R( op s"   r2,  r",11, val, ", lsr #4")            \
+        TEST_R( op s"   r3,  r",10, val, ", asr #5")            \
+        TEST_R( op s"   r4,  r",9, N(val),", asr #6")           \
+        TEST_R( op s"   r5,  r",8, val, ", ror #7")             \
+        TEST_R( op s"   r8,  r",7,val, ", rrx")                 \
+        TEST(   op s"   r0,  #0x00010001")                      \
+        TEST(   op s"   r11, #0xf5000000")                      \
+        TEST(   op s"   r7,  #0x000af000")                      \
+        TEST(   op s"   r4,  #0x00005a00")
+
+#define DATA_PROCESSING32_DM(op,val)            \
+        _DATA_PROCESSING32_DM(op,"",val)        \
+        _DATA_PROCESSING32_DM(op,"s",val)
+
+        DATA_PROCESSING32_DNM("and",0xf00f00ff)
+        DATA_PROCESSING32_NM("tst",0xf00f00ff)
+        DATA_PROCESSING32_DNM("bic",0xf00f00ff)
+        DATA_PROCESSING32_DNM("orr",0xf00f00ff)
+        DATA_PROCESSING32_DM("mov",VAL2)
+        DATA_PROCESSING32_DNM("orn",0xf00f00ff)
+        DATA_PROCESSING32_DM("mvn",VAL2)
+        DATA_PROCESSING32_DNM("eor",0xf00f00ff)
+        DATA_PROCESSING32_NM("teq",0xf00f00ff)
+        DATA_PROCESSING32_DNM("add",VAL2)
+        DATA_PROCESSING32_NM("cmn",VAL2)
+        DATA_PROCESSING32_DNM("adc",VAL2)
+        DATA_PROCESSING32_DNM("sbc",VAL2)
+        DATA_PROCESSING32_DNM("sub",VAL2)
+        DATA_PROCESSING32_NM("cmp",VAL2)
+        DATA_PROCESSING32_DNM("rsb",VAL2)
+
+        TEST_RR("pkhbt  r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR("pkhbt  r14,r",12, HH1,", r",10,HH2,", lsl #2")
+        TEST_RR("pkhtb  r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR("pkhtb  r14,r",12, HH1,", r",10,HH2,", asr #2")
+
+        TEST_UNSUPPORTED(".short 0xea17,0x0f0d  @ tst.w r7, sp")
+        TEST_UNSUPPORTED(".short 0xea17,0x0f0f  @ tst.w r7, pc")
+        TEST_UNSUPPORTED(".short 0xea1d,0x0f07  @ tst.w sp, r7")
+        TEST_UNSUPPORTED(".short 0xea1f,0x0f07  @ tst.w pc, r7")
+        TEST_UNSUPPORTED(".short 0xf01d,0x1f08  @ tst sp, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf01f,0x1f08  @ tst pc, #0x00080008")
+
+        TEST_UNSUPPORTED(".short 0xea97,0x0f0d  @ teq.w r7, sp")
+        TEST_UNSUPPORTED(".short 0xea97,0x0f0f  @ teq.w r7, pc")
+        TEST_UNSUPPORTED(".short 0xea9d,0x0f07  @ teq.w sp, r7")
+        TEST_UNSUPPORTED(".short 0xea9f,0x0f07  @ teq.w pc, r7")
+        TEST_UNSUPPORTED(".short 0xf09d,0x1f08  @ tst sp, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf09f,0x1f08  @ tst pc, #0x00080008")
+
+        TEST_UNSUPPORTED(".short 0xeb17,0x0f0d  @ cmn.w r7, sp")
+        TEST_UNSUPPORTED(".short 0xeb17,0x0f0f  @ cmn.w r7, pc")
+        TEST_P("cmn.w   sp, r",7,0,"")
+        TEST_UNSUPPORTED(".short 0xeb1f,0x0f07  @ cmn.w pc, r7")
+        TEST(  "cmn     sp, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf11f,0x1f08  @ cmn pc, #0x00080008")
+
+        TEST_UNSUPPORTED(".short 0xebb7,0x0f0d  @ cmp.w r7, sp")
+        TEST_UNSUPPORTED(".short 0xebb7,0x0f0f  @ cmp.w r7, pc")
+        TEST_P("cmp.w   sp, r",7,0,"")
+        TEST_UNSUPPORTED(".short 0xebbf,0x0f07  @ cmp.w pc, r7")
+        TEST(  "cmp     sp, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf1bf,0x1f08  @ cmp pc, #0x00080008")
+
+        TEST_UNSUPPORTED(".short 0xea5f,0x070d  @ movs.w r7, sp")
+        TEST_UNSUPPORTED(".short 0xea5f,0x070f  @ movs.w r7, pc")
+        TEST_UNSUPPORTED(".short 0xea5f,0x0d07  @ movs.w sp, r7")
+        TEST_UNSUPPORTED(".short 0xea4f,0x0f07  @ mov.w  pc, r7")
+        TEST_UNSUPPORTED(".short 0xf04f,0x1d08  @ mov sp, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf04f,0x1f08  @ mov pc, #0x00080008")
+
+        TEST_R("add.w   r0, sp, r",1, 4,"")
+        TEST_R("adds    r0, sp, r",1, 4,", asl #3")
+        TEST_R("add     r0, sp, r",1, 4,", asl #4")
+        TEST_R("add     r0, sp, r",1, 16,", ror #1")
+        TEST_R("add.w   sp, sp, r",1, 4,"")
+        TEST_R("add     sp, sp, r",1, 4,", asl #3")
+        TEST_UNSUPPORTED(".short 0xeb0d,0x1d01  @ add sp, sp, r1, asl #4")
+        TEST_UNSUPPORTED(".short 0xeb0d,0x0d71  @ add sp, sp, r1, ror #1")
+        TEST(  "add.w   r0, sp, #24")
+        TEST(  "add.w   sp, sp, #24")
+        TEST_UNSUPPORTED(".short 0xeb0d,0x0f01  @ add pc, sp, r1")
+        TEST_UNSUPPORTED(".short 0xeb0d,0x000f  @ add r0, sp, pc")
+        TEST_UNSUPPORTED(".short 0xeb0d,0x000d  @ add r0, sp, sp")
+        TEST_UNSUPPORTED(".short 0xeb0d,0x0d0f  @ add sp, sp, pc")
+        TEST_UNSUPPORTED(".short 0xeb0d,0x0d0d  @ add sp, sp, sp")
+
+        TEST_R("sub.w   r0, sp, r",1, 4,"")
+        TEST_R("subs    r0, sp, r",1, 4,", asl #3")
+        TEST_R("sub     r0, sp, r",1, 4,", asl #4")
+        TEST_R("sub     r0, sp, r",1, 16,", ror #1")
+        TEST_R("sub.w   sp, sp, r",1, 4,"")
+        TEST_R("sub     sp, sp, r",1, 4,", asl #3")
+        TEST_UNSUPPORTED(".short 0xebad,0x1d01  @ sub sp, sp, r1, asl #4")
+        TEST_UNSUPPORTED(".short 0xebad,0x0d71  @ sub sp, sp, r1, ror #1")
+        TEST_UNSUPPORTED(".short 0xebad,0x0f01  @ sub pc, sp, r1")
+        TEST(  "sub.w   r0, sp, #24")
+        TEST(  "sub.w   sp, sp, #24")
+
+        TEST_UNSUPPORTED(".short 0xea02,0x010f  @ and r1, r2, pc")
+        TEST_UNSUPPORTED(".short 0xea0f,0x0103  @ and r1, pc, r3")
+        TEST_UNSUPPORTED(".short 0xea02,0x0f03  @ and pc, r2, r3")
+        TEST_UNSUPPORTED(".short 0xea02,0x010d  @ and r1, r2, sp")
+        TEST_UNSUPPORTED(".short 0xea0d,0x0103  @ and r1, sp, r3")
+        TEST_UNSUPPORTED(".short 0xea02,0x0d03  @ and sp, r2, r3")
+        TEST_UNSUPPORTED(".short 0xf00d,0x1108  @ and r1, sp, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf00f,0x1108  @ and r1, pc, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf002,0x1d08  @ and sp, r8, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf002,0x1f08  @ and pc, r8, #0x00080008")
+
+        TEST_UNSUPPORTED(".short 0xeb02,0x010f  @ add r1, r2, pc")
+        TEST_UNSUPPORTED(".short 0xeb0f,0x0103  @ add r1, pc, r3")
+        TEST_UNSUPPORTED(".short 0xeb02,0x0f03  @ add pc, r2, r3")
+        TEST_UNSUPPORTED(".short 0xeb02,0x010d  @ add r1, r2, sp")
+        TEST_SUPPORTED(  ".short 0xeb0d,0x0103  @ add r1, sp, r3")
+        TEST_UNSUPPORTED(".short 0xeb02,0x0d03  @ add sp, r2, r3")
+        TEST_SUPPORTED(  ".short 0xf10d,0x1108  @ add r1, sp, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf10d,0x1f08  @ add pc, sp, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf10f,0x1108  @ add r1, pc, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf102,0x1d08  @ add sp, r8, #0x00080008")
+        TEST_UNSUPPORTED(".short 0xf102,0x1f08  @ add pc, r8, #0x00080008")
+
+        TEST_UNSUPPORTED(".short 0xeaa0,0x0000")
+        TEST_UNSUPPORTED(".short 0xeaf0,0x0000")
+        TEST_UNSUPPORTED(".short 0xeb20,0x0000")
+        TEST_UNSUPPORTED(".short 0xeb80,0x0000")
+        TEST_UNSUPPORTED(".short 0xebe0,0x0000")
+
+        TEST_UNSUPPORTED(".short 0xf0a0,0x0000")
+        TEST_UNSUPPORTED(".short 0xf0c0,0x0000")
+        TEST_UNSUPPORTED(".short 0xf0f0,0x0000")
+        TEST_UNSUPPORTED(".short 0xf120,0x0000")
+        TEST_UNSUPPORTED(".short 0xf180,0x0000")
+        TEST_UNSUPPORTED(".short 0xf1e0,0x0000")
+
+        TEST_GROUP("Coprocessor instructions")
+
+        TEST_UNSUPPORTED(".short 0xec00,0x0000")
+        TEST_UNSUPPORTED(".short 0xeff0,0x0000")
+        TEST_UNSUPPORTED(".short 0xfc00,0x0000")
+        TEST_UNSUPPORTED(".short 0xfff0,0x0000")
+
+        TEST_GROUP("Data-processing (plain binary immediate)")
+
+        TEST_R("addw    r0,  r",1, VAL1,", #0x123")
+        TEST(  "addw    r14, sp, #0xf5a")
+        TEST(  "addw    sp, sp, #0x20")
+        TEST(  "addw    r7,  pc, #0x888")
+        TEST_UNSUPPORTED(".short 0xf20f,0x1f20  @ addw pc, pc, #0x120")
+        TEST_UNSUPPORTED(".short 0xf20d,0x1f20  @ addw pc, sp, #0x120")
+        TEST_UNSUPPORTED(".short 0xf20f,0x1d20  @ addw sp, pc, #0x120")
+        TEST_UNSUPPORTED(".short 0xf200,0x1d20  @ addw sp, r0, #0x120")
+
+        TEST_R("subw    r0,  r",1, VAL1,", #0x123")
+        TEST(  "subw    r14, sp, #0xf5a")
+        TEST(  "subw    sp, sp, #0x20")
+        TEST(  "subw    r7,  pc, #0x888")
+        TEST_UNSUPPORTED(".short 0xf2af,0x1f20  @ subw pc, pc, #0x120")
+        TEST_UNSUPPORTED(".short 0xf2ad,0x1f20  @ subw pc, sp, #0x120")
+        TEST_UNSUPPORTED(".short 0xf2af,0x1d20  @ subw sp, pc, #0x120")
+        TEST_UNSUPPORTED(".short 0xf2a0,0x1d20  @ subw sp, r0, #0x120")
+
+        TEST("movw      r0, #0")
+        TEST("movw      r0, #0xffff")
+        TEST("movw      lr, #0xffff")
+        TEST_UNSUPPORTED(".short 0xf240,0x0d00  @ movw sp, #0")
+        TEST_UNSUPPORTED(".short 0xf240,0x0f00  @ movw pc, #0")
+
+        TEST_R("movt    r",0, VAL1,", #0")
+        TEST_R("movt    r",0, VAL2,", #0xffff")
+        TEST_R("movt    r",14,VAL1,", #0xffff")
+        TEST_UNSUPPORTED(".short 0xf2c0,0x0d00  @ movt sp, #0")
+        TEST_UNSUPPORTED(".short 0xf2c0,0x0f00  @ movt pc, #0")
+
+        TEST_R(     "ssat       r0, #24, r",0,   VAL1,"")
+        TEST_R(     "ssat       r14, #24, r",12, VAL2,"")
+        TEST_R(     "ssat       r0, #24, r",0,   VAL1,", lsl #8")
+        TEST_R(     "ssat       r14, #24, r",12, VAL2,", asr #8")
+        TEST_UNSUPPORTED(".short 0xf30c,0x0d17  @ ssat  sp, #24, r12")
+        TEST_UNSUPPORTED(".short 0xf30c,0x0f17  @ ssat  pc, #24, r12")
+        TEST_UNSUPPORTED(".short 0xf30d,0x0c17  @ ssat  r12, #24, sp")
+        TEST_UNSUPPORTED(".short 0xf30f,0x0c17  @ ssat  r12, #24, pc")
+
+        TEST_R(     "usat       r0, #24, r",0,   VAL1,"")
+        TEST_R(     "usat       r14, #24, r",12, VAL2,"")
+        TEST_R(     "usat       r0, #24, r",0,   VAL1,", lsl #8")
+        TEST_R(     "usat       r14, #24, r",12, VAL2,", asr #8")
+        TEST_UNSUPPORTED(".short 0xf38c,0x0d17  @ usat  sp, #24, r12")
+        TEST_UNSUPPORTED(".short 0xf38c,0x0f17  @ usat  pc, #24, r12")
+        TEST_UNSUPPORTED(".short 0xf38d,0x0c17  @ usat  r12, #24, sp")
+        TEST_UNSUPPORTED(".short 0xf38f,0x0c17  @ usat  r12, #24, pc")
+
+        TEST_R(     "ssat16     r0, #12, r",0,   HH1,"")
+        TEST_R(     "ssat16     r14, #12, r",12, HH2,"")
+        TEST_UNSUPPORTED(".short 0xf32c,0x0d0b  @ ssat16        sp, #12, r12")
+        TEST_UNSUPPORTED(".short 0xf32c,0x0f0b  @ ssat16        pc, #12, r12")
+        TEST_UNSUPPORTED(".short 0xf32d,0x0c0b  @ ssat16        r12, #12, sp")
+        TEST_UNSUPPORTED(".short 0xf32f,0x0c0b  @ ssat16        r12, #12, pc")
+
+        TEST_R(     "usat16     r0, #12, r",0,   HH1,"")
+        TEST_R(     "usat16     r14, #12, r",12, HH2,"")
+        TEST_UNSUPPORTED(".short 0xf3ac,0x0d0b  @ usat16        sp, #12, r12")
+        TEST_UNSUPPORTED(".short 0xf3ac,0x0f0b  @ usat16        pc, #12, r12")
+        TEST_UNSUPPORTED(".short 0xf3ad,0x0c0b  @ usat16        r12, #12, sp")
+        TEST_UNSUPPORTED(".short 0xf3af,0x0c0b  @ usat16        r12, #12, pc")
+
+        TEST_R(     "sbfx       r0, r",0  , VAL1,", #0, #31")
+        TEST_R(     "sbfx       r14, r",12, VAL2,", #8, #16")
+        TEST_R(     "sbfx       r4, r",10,  VAL1,", #16, #15")
+        TEST_UNSUPPORTED(".short 0xf34c,0x2d0f  @ sbfx  sp, r12, #8, #16")
+        TEST_UNSUPPORTED(".short 0xf34c,0x2f0f  @ sbfx  pc, r12, #8, #16")
+        TEST_UNSUPPORTED(".short 0xf34d,0x2c0f  @ sbfx  r12, sp, #8, #16")
+        TEST_UNSUPPORTED(".short 0xf34f,0x2c0f  @ sbfx  r12, pc, #8, #16")
+
+        TEST_R(     "ubfx       r0, r",0  , VAL1,", #0, #31")
+        TEST_R(     "ubfx       r14, r",12, VAL2,", #8, #16")
+        TEST_R(     "ubfx       r4, r",10,  VAL1,", #16, #15")
+        TEST_UNSUPPORTED(".short 0xf3cc,0x2d0f  @ ubfx  sp, r12, #8, #16")
+        TEST_UNSUPPORTED(".short 0xf3cc,0x2f0f  @ ubfx  pc, r12, #8, #16")
+        TEST_UNSUPPORTED(".short 0xf3cd,0x2c0f  @ ubfx  r12, sp, #8, #16")
+        TEST_UNSUPPORTED(".short 0xf3cf,0x2c0f  @ ubfx  r12, pc, #8, #16")
+
+        TEST_R(     "bfc        r",0, VAL1,", #4, #20")
+        TEST_R(     "bfc        r",14,VAL2,", #4, #20")
+        TEST_R(     "bfc        r",7, VAL1,", #0, #31")
+        TEST_R(     "bfc        r",8, VAL2,", #0, #31")
+        TEST_UNSUPPORTED(".short 0xf36f,0x0d1e  @ bfc   sp, #0, #31")
+        TEST_UNSUPPORTED(".short 0xf36f,0x0f1e  @ bfc   pc, #0, #31")
+
+        TEST_RR(    "bfi        r",0, VAL1,", r",0  , VAL2,", #0, #31")
+        TEST_RR(    "bfi        r",12,VAL1,", r",14 , VAL2,", #4, #20")
+        TEST_UNSUPPORTED(".short 0xf36e,0x1d17  @ bfi   sp, r14, #4, #20")
+        TEST_UNSUPPORTED(".short 0xf36e,0x1f17  @ bfi   pc, r14, #4, #20")
+        TEST_UNSUPPORTED(".short 0xf36d,0x1e17  @ bfi   r14, sp, #4, #20")
+
+        TEST_GROUP("Branches and miscellaneous control")
+
+CONDITION_INSTRUCTIONS(22,
+        TEST_BF("beq.w  2f")
+        TEST_BB("bne.w  2b")
+        TEST_BF("bgt.w  2f")
+        TEST_BB("blt.w  2b")
+        TEST_BF_X("bpl.w        2f",0x1000)
+)
+
+        TEST_UNSUPPORTED("msr   cpsr, r0")
+        TEST_UNSUPPORTED("msr   cpsr_f, r1")
+        TEST_UNSUPPORTED("msr   spsr, r2")
+
+        TEST_UNSUPPORTED("cpsie.w       i")
+        TEST_UNSUPPORTED("cpsid.w       i")
+        TEST_UNSUPPORTED("cps   0x13")
+
+        TEST_SUPPORTED("yield.w")
+        TEST("sev.w")
+        TEST("nop.w")
+        TEST("wfi.w")
+        TEST_SUPPORTED("wfe.w")
+        TEST_UNSUPPORTED("dbg.w #0")
+
+        TEST_UNSUPPORTED("clrex")
+        TEST_UNSUPPORTED("dsb")
+        TEST_UNSUPPORTED("dmb")
+        TEST_UNSUPPORTED("isb")
+
+        TEST_UNSUPPORTED("bxj   r0")
+
+        TEST_UNSUPPORTED("subs  pc, lr, #4")
+
+        TEST("mrs       r0, cpsr")
+        TEST("mrs       r14, cpsr")
+        TEST_UNSUPPORTED(".short 0xf3ef,0x8d00  @ mrs   sp, spsr")
+        TEST_UNSUPPORTED(".short 0xf3ef,0x8f00  @ mrs   pc, spsr")
+        TEST_UNSUPPORTED("mrs   r0, spsr")
+        TEST_UNSUPPORTED("mrs   lr, spsr")
+
+        TEST_UNSUPPORTED(".short 0xf7f0,0x8000 @ smc #0")
+
+        TEST_UNSUPPORTED(".short 0xf7f0,0xa000 @ undefeined")
+
+        TEST_BF(  "b.w  2f")
+        TEST_BB(  "b.w  2b")
+        TEST_BF_X("b.w  2f", 0x1000)
+
+        TEST_BF(  "bl.w 2f")
+        TEST_BB(  "bl.w 2b")
+        TEST_BB_X("bl.w 2b", 0x1000)
+
+        TEST_X( "blx    __dummy_arm_subroutine",
+                ".arm                           \n\t"
+                ".align                         \n\t"
+                ".type __dummy_arm_subroutine, %%function \n\t"
+                "__dummy_arm_subroutine:        \n\t"
+                "mov    r0, pc                  \n\t"
+                "bx     lr                      \n\t"
+                ".thumb                         \n\t"
+        )
+        TEST(   "blx    __dummy_arm_subroutine")
+
+        TEST_GROUP("Store single data item")
+
+#define SINGLE_STORE(size)                                                      \
+        TEST_RP( "str"size"     r",0, VAL1,", [r",11,-1024,", #1024]")          \
+        TEST_RP( "str"size"     r",14,VAL2,", [r",1, -1024,", #1080]")          \
+        TEST_RP( "str"size"     r",0, VAL1,", [r",11,256,  ", #-120]")          \
+        TEST_RP( "str"size"     r",14,VAL2,", [r",1, 256,  ", #-128]")          \
+        TEST_RP( "str"size"     r",0, VAL1,", [r",11,24,  "], #120")            \
+        TEST_RP( "str"size"     r",14,VAL2,", [r",1, 24,  "], #128")            \
+        TEST_RP( "str"size"     r",0, VAL1,", [r",11,24,  "], #-120")           \
+        TEST_RP( "str"size"     r",14,VAL2,", [r",1, 24,  "], #-128")           \
+        TEST_RP( "str"size"     r",0, VAL1,", [r",11,24,   ", #120]!")          \
+        TEST_RP( "str"size"     r",14,VAL2,", [r",1, 24,   ", #128]!")          \
+        TEST_RP( "str"size"     r",0, VAL1,", [r",11,256,  ", #-120]!")         \
+        TEST_RP( "str"size"     r",14,VAL2,", [r",1, 256,  ", #-128]!")         \
+        TEST_RPR("str"size".w   r",0, VAL1,", [r",1, 0,", r",2, 4,"]")          \
+        TEST_RPR("str"size"     r",14,VAL2,", [r",10,0,", r",11,4,", lsl #1]")  \
+        TEST_R(  "str"size".w   r",7, VAL1,", [sp, #24]")                       \
+        TEST_RP( "str"size".w   r",0, VAL2,", [r",0,0, "]")                     \
+        TEST_UNSUPPORTED("str"size"t    r0, [r1, #4]")
+
+        SINGLE_STORE("b")
+        SINGLE_STORE("h")
+        SINGLE_STORE("")
+
+        TEST("str       sp, [sp]")
+        TEST_UNSUPPORTED(".short 0xf8cf,0xe000  @ str   r14, [pc]")
+        TEST_UNSUPPORTED(".short 0xf8ce,0xf000  @ str   pc, [r14]")
+
+        TEST_GROUP("Advanced SIMD element or structure load/store instructions")
+
+        TEST_UNSUPPORTED(".short 0xf900,0x0000")
+        TEST_UNSUPPORTED(".short 0xf92f,0xffff")
+        TEST_UNSUPPORTED(".short 0xf980,0x0000")
+        TEST_UNSUPPORTED(".short 0xf9ef,0xffff")
+
+        TEST_GROUP("Load single data item and memory hints")
+
+#define SINGLE_LOAD(size)                                               \
+        TEST_P( "ldr"size"      r0, [r",11,-1024, ", #1024]")           \
+        TEST_P( "ldr"size"      r14, [r",1, -1024,", #1080]")           \
+        TEST_P( "ldr"size"      r0, [r",11,256,   ", #-120]")           \
+        TEST_P( "ldr"size"      r14, [r",1, 256,  ", #-128]")           \
+        TEST_P( "ldr"size"      r0, [r",11,24,   "], #120")             \
+        TEST_P( "ldr"size"      r14, [r",1, 24,  "], #128")             \
+        TEST_P( "ldr"size"      r0, [r",11,24,   "], #-120")            \
+        TEST_P( "ldr"size"      r14, [r",1,24,   "], #-128")            \
+        TEST_P( "ldr"size"      r0, [r",11,24,    ", #120]!")           \
+        TEST_P( "ldr"size"      r14, [r",1, 24,   ", #128]!")           \
+        TEST_P( "ldr"size"      r0, [r",11,256,   ", #-120]!")          \
+        TEST_P( "ldr"size"      r14, [r",1, 256,  ", #-128]!")          \
+        TEST_PR("ldr"size".w    r0, [r",1, 0,", r",2, 4,"]")            \
+        TEST_PR("ldr"size"      r14, [r",10,0,", r",11,4,", lsl #1]")   \
+        TEST_X( "ldr"size".w    r0, 3f",                                \
+                ".align 3                               \n\t"           \
+                "3:     .word   "__stringify(VAL1))                     \
+        TEST_X( "ldr"size".w    r14, 3f",                               \
+                ".align 3                               \n\t"           \
+                "3:     .word   "__stringify(VAL2))                     \
+        TEST(   "ldr"size".w    r7, 3b")                                \
+        TEST(   "ldr"size".w    r7, [sp, #24]")                         \
+        TEST_P( "ldr"size".w    r0, [r",0,0, "]")                       \
+        TEST_UNSUPPORTED("ldr"size"t    r0, [r1, #4]")
+
+        SINGLE_LOAD("b")
+        SINGLE_LOAD("sb")
+        SINGLE_LOAD("h")
+        SINGLE_LOAD("sh")
+        SINGLE_LOAD("")
+
+        TEST_BF_P("ldr  pc, [r",14, 15*4,"]")
+        TEST_P(   "ldr  sp, [r",14, 13*4,"]")
+        TEST_BF_R("ldr  pc, [sp, r",14, 15*4,"]")
+        TEST_R(   "ldr  sp, [sp, r",14, 13*4,"]")
+        TEST_THUMB_TO_ARM_INTERWORK_P("ldr      pc, [r",0,0,", #15*4]")
+        TEST_SUPPORTED("ldr     sp, 99f")
+        TEST_SUPPORTED("ldr     pc, 99f")
+
+        TEST_UNSUPPORTED(".short 0xf854,0x700d  @ ldr   r7, [r4, sp]")
+        TEST_UNSUPPORTED(".short 0xf854,0x700f  @ ldr   r7, [r4, pc]")
+        TEST_UNSUPPORTED(".short 0xf814,0x700d  @ ldrb  r7, [r4, sp]")
+        TEST_UNSUPPORTED(".short 0xf814,0x700f  @ ldrb  r7, [r4, pc]")
+        TEST_UNSUPPORTED(".short 0xf89f,0xd004  @ ldrb  sp, 99f")
+        TEST_UNSUPPORTED(".short 0xf814,0xd008  @ ldrb  sp, [r4, r8]")
+        TEST_UNSUPPORTED(".short 0xf894,0xd000  @ ldrb  sp, [r4]")
+
+        TEST_UNSUPPORTED(".short 0xf860,0x0000") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xf9ff,0xffff") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xf950,0x0000") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xf95f,0xffff") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xf800,0x0800") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xf97f,0xfaff") /* Unallocated space */
+
+        TEST(   "pli    [pc, #4]")
+        TEST(   "pli    [pc, #-4]")
+        TEST(   "pld    [pc, #4]")
+        TEST(   "pld    [pc, #-4]")
+
+        TEST_P( "pld    [r",0,-1024,", #1024]")
+        TEST(   ".short 0xf8b0,0xf400   @ pldw  [r0, #1024]")
+        TEST_P( "pli    [r",4, 0b,", #1024]")
+        TEST_P( "pld    [r",7, 120,", #-120]")
+        TEST(   ".short 0xf837,0xfc78   @ pldw  [r7, #-120]")
+        TEST_P( "pli    [r",11,120,", #-120]")
+        TEST(   "pld    [sp, #0]")
+
+        TEST_PR("pld    [r",7, 24, ", r",0, 16,"]")
+        TEST_PR("pld    [r",8, 24, ", r",12,16,", lsl #3]")
+        TEST_SUPPORTED(".short 0xf837,0xf000    @ pldw  [r7, r0]")
+        TEST_SUPPORTED(".short 0xf838,0xf03c    @ pldw  [r8, r12, lsl #3]");
+        TEST_RR("pli    [r",12,0b,", r",0, 16,"]")
+        TEST_RR("pli    [r",0, 0b,", r",12,16,", lsl #3]")
+        TEST_R( "pld    [sp, r",1, 16,"]")
+        TEST_UNSUPPORTED(".short 0xf817,0xf00d  @pld    [r7, sp]")
+        TEST_UNSUPPORTED(".short 0xf817,0xf00f  @pld    [r7, pc]")
+
+        TEST_GROUP("Data-processing (register)")
+
+#define SHIFTS32(op)                                    \
+        TEST_RR(op"     r0,  r",1, VAL1,", r",2, 3, "") \
+        TEST_RR(op"     r14, r",12,VAL2,", r",11,10,"")
+
+        SHIFTS32("lsl")
+        SHIFTS32("lsls")
+        SHIFTS32("lsr")
+        SHIFTS32("lsrs")
+        SHIFTS32("asr")
+        SHIFTS32("asrs")
+        SHIFTS32("ror")
+        SHIFTS32("rors")
+
+        TEST_UNSUPPORTED(".short 0xfa01,0xff02  @ lsl   pc, r1, r2")
+        TEST_UNSUPPORTED(".short 0xfa01,0xfd02  @ lsl   sp, r1, r2")
+        TEST_UNSUPPORTED(".short 0xfa0f,0xf002  @ lsl   r0, pc, r2")
+        TEST_UNSUPPORTED(".short 0xfa0d,0xf002  @ lsl   r0, sp, r2")
+        TEST_UNSUPPORTED(".short 0xfa01,0xf00f  @ lsl   r0, r1, pc")
+        TEST_UNSUPPORTED(".short 0xfa01,0xf00d  @ lsl   r0, r1, sp")
+
+        TEST_RR(    "sxtah      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "sxtah      r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "sxth       r8, r",7,  HH1,"")
+
+        TEST_UNSUPPORTED(".short 0xfa0f,0xff87  @ sxth  pc, r7");
+        TEST_UNSUPPORTED(".short 0xfa0f,0xfd87  @ sxth  sp, r7");
+        TEST_UNSUPPORTED(".short 0xfa0f,0xf88f  @ sxth  r8, pc");
+        TEST_UNSUPPORTED(".short 0xfa0f,0xf88d  @ sxth  r8, sp");
+
+        TEST_RR(    "uxtah      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uxtah      r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "uxth       r8, r",7,  HH1,"")
+
+        TEST_RR(    "sxtab16    r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "sxtab16    r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "sxtb16     r8, r",7,  HH1,"")
+
+        TEST_RR(    "uxtab16    r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uxtab16    r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "uxtb16     r8, r",7,  HH1,"")
+
+        TEST_RR(    "sxtab      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "sxtab      r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "sxtb       r8, r",7,  HH1,"")
+
+        TEST_RR(    "uxtab      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "uxtab      r14,r",12, HH2,", r",10,HH1,", ror #8")
+        TEST_R(     "uxtb       r8, r",7,  HH1,"")
+
+        TEST_UNSUPPORTED(".short 0xfa60,0x00f0")
+        TEST_UNSUPPORTED(".short 0xfa7f,0xffff")
+
+#define PARALLEL_ADD_SUB(op)                                    \
+        TEST_RR(  op"add16      r0, r",0,  HH1,", r",1, HH2,"") \
+        TEST_RR(  op"add16      r14, r",12,HH2,", r",10,HH1,"") \
+        TEST_RR(  op"asx        r0, r",0,  HH1,", r",1, HH2,"") \
+        TEST_RR(  op"asx        r14, r",12,HH2,", r",10,HH1,"") \
+        TEST_RR(  op"sax        r0, r",0,  HH1,", r",1, HH2,"") \
+        TEST_RR(  op"sax        r14, r",12,HH2,", r",10,HH1,"") \
+        TEST_RR(  op"sub16      r0, r",0,  HH1,", r",1, HH2,"") \
+        TEST_RR(  op"sub16      r14, r",12,HH2,", r",10,HH1,"") \
+        TEST_RR(  op"add8       r0, r",0,  HH1,", r",1, HH2,"") \
+        TEST_RR(  op"add8       r14, r",12,HH2,", r",10,HH1,"") \
+        TEST_RR(  op"sub8       r0, r",0,  HH1,", r",1, HH2,"") \
+        TEST_RR(  op"sub8       r14, r",12,HH2,", r",10,HH1,"")
+
+        TEST_GROUP("Parallel addition and subtraction, signed")
+
+        PARALLEL_ADD_SUB("s")
+        PARALLEL_ADD_SUB("q")
+        PARALLEL_ADD_SUB("sh")
+
+        TEST_GROUP("Parallel addition and subtraction, unsigned")
+
+        PARALLEL_ADD_SUB("u")
+        PARALLEL_ADD_SUB("uq")
+        PARALLEL_ADD_SUB("uh")
+
+        TEST_GROUP("Miscellaneous operations")
+
+        TEST_RR("qadd   r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR("qadd   lr, r",9, VAL2,", r",8, VAL1,"")
+        TEST_RR("qsub   r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR("qsub   lr, r",9, VAL2,", r",8, VAL1,"")
+        TEST_RR("qdadd  r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR("qdadd  lr, r",9, VAL2,", r",8, VAL1,"")
+        TEST_RR("qdsub  r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR("qdsub  lr, r",9, VAL2,", r",8, VAL1,"")
+
+        TEST_R("rev.w   r0, r",0,   VAL1,"")
+        TEST_R("rev     r14, r",12, VAL2,"")
+        TEST_R("rev16.w r0, r",0,   VAL1,"")
+        TEST_R("rev16   r14, r",12, VAL2,"")
+        TEST_R("rbit    r0, r",0,   VAL1,"")
+        TEST_R("rbit    r14, r",12, VAL2,"")
+        TEST_R("revsh.w r0, r",0,   VAL1,"")
+        TEST_R("revsh   r14, r",12, VAL2,"")
+
+        TEST_UNSUPPORTED(".short 0xfa9c,0xff8c  @ rev   pc, r12");
+        TEST_UNSUPPORTED(".short 0xfa9c,0xfd8c  @ rev   sp, r12");
+        TEST_UNSUPPORTED(".short 0xfa9f,0xfe8f  @ rev   r14, pc");
+        TEST_UNSUPPORTED(".short 0xfa9d,0xfe8d  @ rev   r14, sp");
+
+        TEST_RR("sel    r0, r",0,  VAL1,", r",1, VAL2,"")
+        TEST_RR("sel    r14, r",12,VAL1,", r",10, VAL2,"")
+
+        TEST_R("clz     r0, r",0, 0x0,"")
+        TEST_R("clz     r7, r",14,0x1,"")
+        TEST_R("clz     lr, r",7, 0xffffffff,"")
+
+        TEST_UNSUPPORTED(".short 0xfa80,0xf030") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xfab0,0xf000") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+
+        TEST_GROUP("Multiply, multiply accumulate, and absolute difference operations")
+
+        TEST_RR(    "mul        r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "mul        r7, r",8, VAL2,", r",9, VAL2,"")
+        TEST_UNSUPPORTED(".short 0xfb08,0xff09  @ mul   pc, r8, r9")
+        TEST_UNSUPPORTED(".short 0xfb08,0xfd09  @ mul   sp, r8, r9")
+        TEST_UNSUPPORTED(".short 0xfb0f,0xf709  @ mul   r7, pc, r9")
+        TEST_UNSUPPORTED(".short 0xfb0d,0xf709  @ mul   r7, sp, r9")
+        TEST_UNSUPPORTED(".short 0xfb08,0xf70f  @ mul   r7, r8, pc")
+        TEST_UNSUPPORTED(".short 0xfb08,0xf70d  @ mul   r7, r8, sp")
+
+        TEST_RRR(   "mla        r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(   "mla        r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_UNSUPPORTED(".short 0xfb08,0xaf09  @ mla   pc, r8, r9, r10");
+        TEST_UNSUPPORTED(".short 0xfb08,0xad09  @ mla   sp, r8, r9, r10");
+        TEST_UNSUPPORTED(".short 0xfb0f,0xa709  @ mla   r7, pc, r9, r10");
+        TEST_UNSUPPORTED(".short 0xfb0d,0xa709  @ mla   r7, sp, r9, r10");
+        TEST_UNSUPPORTED(".short 0xfb08,0xa70f  @ mla   r7, r8, pc, r10");
+        TEST_UNSUPPORTED(".short 0xfb08,0xa70d  @ mla   r7, r8, sp, r10");
+        TEST_UNSUPPORTED(".short 0xfb08,0xd709  @ mla   r7, r8, r9, sp");
+
+        TEST_RRR(   "mls        r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(   "mls        r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+
+        TEST_RRR(   "smlabb     r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(   "smlabb     r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RRR(   "smlatb     r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(   "smlatb     r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RRR(   "smlabt     r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(   "smlabt     r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RRR(   "smlatt     r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(   "smlatt     r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(    "smulbb     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smulbb     r7, r",8, VAL3,", r",9, VAL1,"")
+        TEST_RR(    "smultb     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smultb     r7, r",8, VAL3,", r",9, VAL1,"")
+        TEST_RR(    "smulbt     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smulbt     r7, r",8, VAL3,", r",9, VAL1,"")
+        TEST_RR(    "smultt     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smultt     r7, r",8, VAL3,", r",9, VAL1,"")
+
+        TEST_RRR(   "smlad      r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
+        TEST_RRR(   "smlad      r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+        TEST_RRR(   "smladx     r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
+        TEST_RRR(   "smladx     r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+        TEST_RR(    "smuad      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "smuad      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_RR(    "smuadx     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "smuadx     r14, r",12,HH2,", r",10,HH1,"")
+
+        TEST_RRR(   "smlawb     r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(   "smlawb     r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RRR(   "smlawt     r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
+        TEST_RRR(   "smlawt     r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+        TEST_RR(    "smulwb     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smulwb     r7, r",8, VAL3,", r",9, VAL1,"")
+        TEST_RR(    "smulwt     r0, r",1, VAL1,", r",2, VAL2,"")
+        TEST_RR(    "smulwt     r7, r",8, VAL3,", r",9, VAL1,"")
+
+        TEST_RRR(   "smlsd      r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
+        TEST_RRR(   "smlsd      r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+        TEST_RRR(   "smlsdx     r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
+        TEST_RRR(   "smlsdx     r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+        TEST_RR(    "smusd      r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "smusd      r14, r",12,HH2,", r",10,HH1,"")
+        TEST_RR(    "smusdx     r0, r",0,  HH1,", r",1, HH2,"")
+        TEST_RR(    "smusdx     r14, r",12,HH2,", r",10,HH1,"")
+
+        TEST_RRR(   "smmla      r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
+        TEST_RRR(   "smmla      r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+        TEST_RRR(   "smmlar     r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
+        TEST_RRR(   "smmlar     r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+        TEST_RR(    "smmul      r0, r",0,  VAL1,", r",1, VAL2,"")
+        TEST_RR(    "smmul      r14, r",12,VAL2,", r",10,VAL1,"")
+        TEST_RR(    "smmulr     r0, r",0,  VAL1,", r",1, VAL2,"")
+        TEST_RR(    "smmulr     r14, r",12,VAL2,", r",10,VAL1,"")
+
+        TEST_RRR(   "smmls      r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
+        TEST_RRR(   "smmls      r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+        TEST_RRR(   "smmlsr     r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
+        TEST_RRR(   "smmlsr     r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+
+        TEST_RRR(   "usada8     r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL3,"")
+        TEST_RRR(   "usada8     r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
+        TEST_RR(    "usad8      r0, r",0,  VAL1,", r",1, VAL2,"")
+        TEST_RR(    "usad8      r14, r",12,VAL2,", r",10,VAL1,"")
+
+        TEST_UNSUPPORTED(".short 0xfb00,0xf010") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xfb0f,0xff1f") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xfb70,0xf010") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xfb70,0x0010") /* Unallocated space */
+        TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+
+        TEST_GROUP("Long multiply, long multiply accumulate, and divide")
+
+        TEST_RR(   "smull       r0, r1, r",2, VAL1,", r",3, VAL2,"")
+        TEST_RR(   "smull       r7, r8, r",9, VAL2,", r",10, VAL1,"")
+        TEST_UNSUPPORTED(".short 0xfb89,0xf80a  @ smull pc, r8, r9, r10");
+        TEST_UNSUPPORTED(".short 0xfb89,0xd80a  @ smull sp, r8, r9, r10");
+        TEST_UNSUPPORTED(".short 0xfb89,0x7f0a  @ smull r7, pc, r9, r10");
+        TEST_UNSUPPORTED(".short 0xfb89,0x7d0a  @ smull r7, sp, r9, r10");
+        TEST_UNSUPPORTED(".short 0xfb8f,0x780a  @ smull r7, r8, pc, r10");
+        TEST_UNSUPPORTED(".short 0xfb8d,0x780a  @ smull r7, r8, sp, r10");
+        TEST_UNSUPPORTED(".short 0xfb89,0x780f  @ smull r7, r8, r9, pc");
+        TEST_UNSUPPORTED(".short 0xfb89,0x780d  @ smull r7, r8, r9, sp");
+
+        TEST_RR(   "umull       r0, r1, r",2, VAL1,", r",3, VAL2,"")
+        TEST_RR(   "umull       r7, r8, r",9, VAL2,", r",10, VAL1,"")
+
+        TEST_RRRR( "smlal       r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR( "smlal       r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+        TEST_RRRR( "smlalbb     r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR( "smlalbb     r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRRR( "smlalbt     r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR( "smlalbt     r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRRR( "smlaltb     r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR( "smlaltb     r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRRR( "smlaltt     r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR( "smlaltt     r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+        TEST_RRRR( "smlald      r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+        TEST_RRRR( "smlald      r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+        TEST_RRRR( "smlaldx     r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+        TEST_RRRR( "smlaldx     r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+
+        TEST_RRRR( "smlsld      r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+        TEST_RRRR( "smlsld      r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+        TEST_RRRR( "smlsldx     r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+        TEST_RRRR( "smlsldx     r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+
+        TEST_RRRR( "umlal       r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR( "umlal       r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+        TEST_RRRR( "umaal       r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+        TEST_RRRR( "umaal       r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+        TEST_GROUP("Coprocessor instructions")
+
+        TEST_UNSUPPORTED(".short 0xfc00,0x0000")
+        TEST_UNSUPPORTED(".short 0xffff,0xffff")
+
+        TEST_GROUP("Testing instructions in IT blocks")
+
+        TEST_ITBLOCK("sub.w     r0, r0")
+
+        verbose("\n");
+}
+
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
new file mode 100644
index 000000000000..e17cdd6d90d8
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test.c
@@ -0,0 +1,1748 @@
+/*
+ * arch/arm/kernel/kprobes-test.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This file contains test code for ARM kprobes.
+ *
+ * The top level function run_all_tests() executes tests for all of the
+ * supported instruction sets: ARM, 16-bit Thumb, and 32-bit Thumb. These tests
+ * fall into two categories; run_api_tests() checks basic functionality of the
+ * kprobes API, and run_test_cases() is a comprehensive test for kprobes
+ * instruction decoding and simulation.
+ *
+ * run_test_cases() first checks the kprobes decoding table for self consistency
+ * (using table_test()) then executes a series of test cases for each of the CPU
+ * instruction forms. coverage_start() and coverage_end() are used to verify
+ * that these test cases cover all of the possible combinations of instructions
+ * described by the kprobes decoding tables.
+ *
+ * The individual test cases are in kprobes-test-arm.c and kprobes-test-thumb.c
+ * which use the macros defined in kprobes-test.h. The rest of this
+ * documentation will describe the operation of the framework used by these
+ * test cases.
+ */
+
+/*
+ * TESTING METHODOLOGY
+ * -------------------
+ *
+ * The methodology used to test an ARM instruction 'test_insn' is to use
+ * inline assembler like:
+ *
+ * test_before: nop
+ * test_case:   test_insn
+ * test_after:  nop
+ *
+ * When the test case is run a kprobe is placed of each nop. The
+ * post-handler of the test_before probe is used to modify the saved CPU
+ * register context to that which we require for the test case. The
+ * pre-handler of the of the test_after probe saves a copy of the CPU
+ * register context. In this way we can execute test_insn with a specific
+ * register context and see the results afterwards.
+ *
+ * To actually test the kprobes instruction emulation we perform the above
+ * step a second time but with an additional kprobe on the test_case
+ * instruction itself. If the emulation is accurate then the results seen
+ * by the test_after probe will be identical to the first run which didn't
+ * have a probe on test_case.
+ *
+ * Each test case is run several times with a variety of variations in the
+ * flags value of stored in CPSR, and for Thumb code, different ITState.
+ *
+ * For instructions which can modify PC, a second test_after probe is used
+ * like this:
+ *
+ * test_before: nop
+ * test_case:   test_insn
+ * test_after:  nop
+ *              b test_done
+ * test_after2: nop
+ * test_done:
+ *
+ * The test case is constructed such that test_insn branches to
+ * test_after2, or, if testing a conditional instruction, it may just
+ * continue to test_after. The probes inserted at both locations let us
+ * determine which happened. A similar approach is used for testing
+ * backwards branches...
+ *
+ *              b test_before
+ *              b test_done  @ helps to cope with off by 1 branches
+ * test_after2: nop
+ *              b test_done
+ * test_before: nop
+ * test_case:   test_insn
+ * test_after:  nop
+ * test_done:
+ *
+ * The macros used to generate the assembler instructions describe above
+ * are TEST_INSTRUCTION, TEST_BRANCH_F (branch forwards) and TEST_BRANCH_B
+ * (branch backwards). In these, the local variables numbered 1, 50, 2 and
+ * 99 represent: test_before, test_case, test_after2 and test_done.
+ *
+ * FRAMEWORK
+ * ---------
+ *
+ * Each test case is wrapped between the pair of macros TESTCASE_START and
+ * TESTCASE_END. As well as performing the inline assembler boilerplate,
+ * these call out to the kprobes_test_case_start() and
+ * kprobes_test_case_end() functions which drive the execution of the test
+ * case. The specific arguments to use for each test case are stored as
+ * inline data constructed using the various TEST_ARG_* macros. Putting
+ * this all together, a simple test case may look like:
+ *
+ *      TESTCASE_START("Testing mov r0, r7")
+ *      TEST_ARG_REG(7, 0x12345678) // Set r7=0x12345678
+ *      TEST_ARG_END("")
+ *      TEST_INSTRUCTION("mov r0, r7")
+ *      TESTCASE_END
+ *
+ * Note, in practice the single convenience macro TEST_R would be used for this
+ * instead.
+ *
+ * The above would expand to assembler looking something like:
+ *
+ *      @ TESTCASE_START
+ *      bl      __kprobes_test_case_start
+ *      @ start of inline data...
+ *      .ascii "mov r0, r7"     @ text title for test case
+ *      .byte   0
+ *      .align  2
+ *
+ *      @ TEST_ARG_REG
+ *      .byte   ARG_TYPE_REG
+ *      .byte   7
+ *      .short  0
+ *      .word   0x1234567
+ *
+ *      @ TEST_ARG_END
+ *      .byte   ARG_TYPE_END
+ *      .byte   TEST_ISA        @ flags, including ISA being tested
+ *      .short  50f-0f          @ offset of 'test_before'
+ *      .short  2f-0f           @ offset of 'test_after2' (if relevent)
+ *      .short  99f-0f          @ offset of 'test_done'
+ *      @ start of test case code...
+ *      0:
+ *      .code   TEST_ISA        @ switch to ISA being tested
+ *
+ *      @ TEST_INSTRUCTION
+ *      50:     nop             @ location for 'test_before' probe
+ *      1:      mov r0, r7      @ the test case instruction 'test_insn'
+ *              nop             @ location for 'test_after' probe
+ *
+ *      // TESTCASE_END
+ *      2:
+ *      99:     bl __kprobes_test_case_end_##TEST_ISA
+ *      .code   NONMAL_ISA
+ *
+ * When the above is execute the following happens...
+ *
+ * __kprobes_test_case_start() is an assembler wrapper which sets up space
+ * for a stack buffer and calls the C function kprobes_test_case_start().
+ * This C function will do some initial processing of the inline data and
+ * setup some global state. It then inserts the test_before and test_after
+ * kprobes and returns a value which causes the assembler wrapper to jump
+ * to the start of the test case code, (local label '0').
+ *
+ * When the test case code executes, the test_before probe will be hit and
+ * test_before_post_handler will call setup_test_context(). This fills the
+ * stack buffer and CPU registers with a test pattern and then processes
+ * the test case arguments. In our example there is one TEST_ARG_REG which
+ * indicates that R7 should be loaded with the value 0x12345678.
+ *
+ * When the test_before probe ends, the test case continues and executes
+ * the "mov r0, r7" instruction. It then hits the test_after probe and the
+ * pre-handler for this (test_after_pre_handler) will save a copy of the
+ * CPU register context. This should now have R0 holding the same value as
+ * R7.
+ *
+ * Finally we get to the call to __kprobes_test_case_end_{32,16}. This is
+ * an assembler wrapper which switches back to the ISA used by the test
+ * code and calls the C function kprobes_test_case_end().
+ *
+ * For each run through the test case, test_case_run_count is incremented
+ * by one. For even runs, kprobes_test_case_end() saves a copy of the
+ * register and stack buffer contents from the test case just run. It then
+ * inserts a kprobe on the test case instruction 'test_insn' and returns a
+ * value to cause the test case code to be re-run.
+ *
+ * For odd numbered runs, kprobes_test_case_end() compares the register and
+ * stack buffer contents to those that were saved on the previous even
+ * numbered run (the one without the kprobe on test_insn). These should be
+ * the same if the kprobe instruction simulation routine is correct.
+ *
+ * The pair of test case runs is repeated with different combinations of
+ * flag values in CPSR and, for Thumb, different ITState. This is
+ * controlled by test_context_cpsr().
+ *
+ * BUILDING TEST CASES
+ * -------------------
+ *
+ *
+ * As an aid to building test cases, the stack buffer is initialised with
+ * some special values:
+ *
+ *   [SP+13*4]  Contains SP+120. This can be used to test instructions
+ *              which load a value into SP.
+ *
+ *   [SP+15*4]  When testing branching instructions using TEST_BRANCH_{F,B},
+ *              this holds the target address of the branch, 'test_after2'.
+ *              This can be used to test instructions which load a PC value
+ *              from memory.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kprobes.h>
+
+#include "kprobes.h"
+#include "kprobes-test.h"
+
+
+#define BENCHMARKING    1
+
+
+/*
+ * Test basic API
+ */
+
+static bool test_regs_ok;
+static int test_func_instance;
+static int pre_handler_called;
+static int post_handler_called;
+static int jprobe_func_called;
+static int kretprobe_handler_called;
+
+#define FUNC_ARG1 0x12345678
+#define FUNC_ARG2 0xabcdef
+
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+long arm_func(long r0, long r1);
+
+static void __used __naked __arm_kprobes_test_func(void)
+{
+        __asm__ __volatile__ (
+                ".arm                                   \n\t"
+                ".type arm_func, %%function             \n\t"
+                "arm_func:                              \n\t"
+                "adds   r0, r0, r1                      \n\t"
+                "bx     lr                              \n\t"
+                ".code "NORMAL_ISA       /* Back to Thumb if necessary */
+                : : : "r0", "r1", "cc"
+        );
+}
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+long thumb16_func(long r0, long r1);
+long thumb32even_func(long r0, long r1);
+long thumb32odd_func(long r0, long r1);
+
+static void __used __naked __thumb_kprobes_test_funcs(void)
+{
+        __asm__ __volatile__ (
+                ".type thumb16_func, %%function         \n\t"
+                "thumb16_func:                          \n\t"
+                "adds.n r0, r0, r1                      \n\t"
+                "bx     lr                              \n\t"
+
+                ".align                                 \n\t"
+                ".type thumb32even_func, %%function     \n\t"
+                "thumb32even_func:                      \n\t"
+                "adds.w r0, r0, r1                      \n\t"
+                "bx     lr                              \n\t"
+
+                ".align                                 \n\t"
+                "nop.n                                  \n\t"
+                ".type thumb32odd_func, %%function      \n\t"
+                "thumb32odd_func:                       \n\t"
+                "adds.w r0, r0, r1                      \n\t"
+                "bx     lr                              \n\t"
+
+                : : : "r0", "r1", "cc"
+        );
+}
+
+#endif /* CONFIG_THUMB2_KERNEL */
+
+
+static int call_test_func(long (*func)(long, long), bool check_test_regs)
+{
+        long ret;
+
+        ++test_func_instance;
+        test_regs_ok = false;
+
+        ret = (*func)(FUNC_ARG1, FUNC_ARG2);
+        if (ret != FUNC_ARG1 + FUNC_ARG2) {
+                pr_err("FAIL: call_test_func: func returned %lx\n", ret);
+                return false;
+        }
+
+        if (check_test_regs && !test_regs_ok) {
+                pr_err("FAIL: test regs not OK\n");
+                return false;
+        }
+
+        return true;
+}
+
+static int __kprobes pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+        pre_handler_called = test_func_instance;
+        if (regs->ARM_r0 == FUNC_ARG1 && regs->ARM_r1 == FUNC_ARG2)
+                test_regs_ok = true;
+        return 0;
+}
+
+static void __kprobes post_handler(struct kprobe *p, struct pt_regs *regs,
+                                unsigned long flags)
+{
+        post_handler_called = test_func_instance;
+        if (regs->ARM_r0 != FUNC_ARG1 + FUNC_ARG2 || regs->ARM_r1 != FUNC_ARG2)
+                test_regs_ok = false;
+}
+
+static struct kprobe the_kprobe = {
+        .addr           = 0,
+        .pre_handler    = pre_handler,
+        .post_handler   = post_handler
+};
+
+static int test_kprobe(long (*func)(long, long))
+{
+        int ret;
+
+        the_kprobe.addr = (kprobe_opcode_t *)func;
+        ret = register_kprobe(&the_kprobe);
+        if (ret < 0) {
+                pr_err("FAIL: register_kprobe failed with %d\n", ret);
+                return ret;
+        }
+
+        ret = call_test_func(func, true);
+
+        unregister_kprobe(&the_kprobe);
+        the_kprobe.flags = 0; /* Clear disable flag to allow reuse */
+
+        if (!ret)
+                return -EINVAL;
+        if (pre_handler_called != test_func_instance) {
+                pr_err("FAIL: kprobe pre_handler not called\n");
+                return -EINVAL;
+        }
+        if (post_handler_called != test_func_instance) {
+                pr_err("FAIL: kprobe post_handler not called\n");
+                return -EINVAL;
+        }
+        if (!call_test_func(func, false))
+                return -EINVAL;
+        if (pre_handler_called == test_func_instance ||
+                                post_handler_called == test_func_instance) {
+                pr_err("FAIL: probe called after unregistering\n");
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+static void __kprobes jprobe_func(long r0, long r1)
+{
+        jprobe_func_called = test_func_instance;
+        if (r0 == FUNC_ARG1 && r1 == FUNC_ARG2)
+                test_regs_ok = true;
+        jprobe_return();
+}
+
+static struct jprobe the_jprobe = {
+        .entry          = jprobe_func,
+};
+
+static int test_jprobe(long (*func)(long, long))
+{
+        int ret;
+
+        the_jprobe.kp.addr = (kprobe_opcode_t *)func;
+        ret = register_jprobe(&the_jprobe);
+        if (ret < 0) {
+                pr_err("FAIL: register_jprobe failed with %d\n", ret);
+                return ret;
+        }
+
+        ret = call_test_func(func, true);
+
+        unregister_jprobe(&the_jprobe);
+        the_jprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
+
+        if (!ret)
+                return -EINVAL;
+        if (jprobe_func_called != test_func_instance) {
+                pr_err("FAIL: jprobe handler function not called\n");
+                return -EINVAL;
+        }
+        if (!call_test_func(func, false))
+                return -EINVAL;
+        if (jprobe_func_called == test_func_instance) {
+                pr_err("FAIL: probe called after unregistering\n");
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+static int __kprobes
+kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+        kretprobe_handler_called = test_func_instance;
+        if (regs_return_value(regs) == FUNC_ARG1 + FUNC_ARG2)
+                test_regs_ok = true;
+        return 0;
+}
+
+static struct kretprobe the_kretprobe = {
+        .handler        = kretprobe_handler,
+};
+
+static int test_kretprobe(long (*func)(long, long))
+{
+        int ret;
+
+        the_kretprobe.kp.addr = (kprobe_opcode_t *)func;
+        ret = register_kretprobe(&the_kretprobe);
+        if (ret < 0) {
+                pr_err("FAIL: register_kretprobe failed with %d\n", ret);
+                return ret;
+        }
+
+        ret = call_test_func(func, true);
+
+        unregister_kretprobe(&the_kretprobe);
+        the_kretprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
+
+        if (!ret)
+                return -EINVAL;
+        if (kretprobe_handler_called != test_func_instance) {
+                pr_err("FAIL: kretprobe handler not called\n");
+                return -EINVAL;
+        }
+        if (!call_test_func(func, false))
+                return -EINVAL;
+        if (jprobe_func_called == test_func_instance) {
+                pr_err("FAIL: kretprobe called after unregistering\n");
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+static int run_api_tests(long (*func)(long, long))
+{
+        int ret;
+
+        pr_info("    kprobe\n");
+        ret = test_kprobe(func);
+        if (ret < 0)
+                return ret;
+
+        pr_info("    jprobe\n");
+        ret = test_jprobe(func);
+        if (ret < 0)
+                return ret;
+
+        pr_info("    kretprobe\n");
+        ret = test_kretprobe(func);
+        if (ret < 0)
+                return ret;
+
+        return 0;
+}
+
+
+/*
+ * Benchmarking
+ */
+
+#if BENCHMARKING
+
+static void __naked benchmark_nop(void)
+{
+        __asm__ __volatile__ (
+                "nop            \n\t"
+                "bx     lr"
+        );
+}
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define wide ".w"
+#else
+#define wide
+#endif
+
+static void __naked benchmark_pushpop1(void)
+{
+        __asm__ __volatile__ (
+                "stmdb"wide"    sp!, {r3-r11,lr}  \n\t"
+                "ldmia"wide"    sp!, {r3-r11,pc}"
+        );
+}
+
+static void __naked benchmark_pushpop2(void)
+{
+        __asm__ __volatile__ (
+                "stmdb"wide"    sp!, {r0-r8,lr}  \n\t"
+                "ldmia"wide"    sp!, {r0-r8,pc}"
+        );
+}
+
+static void __naked benchmark_pushpop3(void)
+{
+        __asm__ __volatile__ (
+                "stmdb"wide"    sp!, {r4,lr}  \n\t"
+                "ldmia"wide"    sp!, {r4,pc}"
+        );
+}
+
+static void __naked benchmark_pushpop4(void)
+{
+        __asm__ __volatile__ (
+                "stmdb"wide"    sp!, {r0,lr}  \n\t"
+                "ldmia"wide"    sp!, {r0,pc}"
+        );
+}
+
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+static void __naked benchmark_pushpop_thumb(void)
+{
+        __asm__ __volatile__ (
+                "push.n {r0-r7,lr}  \n\t"
+                "pop.n  {r0-r7,pc}"
+        );
+}
+
+#endif
+
+static int __kprobes
+benchmark_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+        return 0;
+}
+
+static int benchmark(void(*fn)(void))
+{
+        unsigned n, i, t, t0;
+
+        for (n = 1000; ; n *= 2) {
+                t0 = sched_clock();
+                for (i = n; i > 0; --i)
+                        fn();
+                t = sched_clock() - t0;
+                if (t >= 250000000)
+                        break; /* Stop once we took more than 0.25 seconds */
+        }
+        return t / n; /* Time for one iteration in nanoseconds */
+};
+
+static int kprobe_benchmark(void(*fn)(void), unsigned offset)
+{
+        struct kprobe k = {
+                .addr           = (kprobe_opcode_t *)((uintptr_t)fn + offset),
+                .pre_handler    = benchmark_pre_handler,
+        };
+
+        int ret = register_kprobe(&k);
+        if (ret < 0) {
+                pr_err("FAIL: register_kprobe failed with %d\n", ret);
+                return ret;
+        }
+
+        ret = benchmark(fn);
+
+        unregister_kprobe(&k);
+        return ret;
+};
+
+struct benchmarks {
+        void            (*fn)(void);
+        unsigned        offset;
+        const char      *title;
+};
+
+static int run_benchmarks(void)
+{
+        int ret;
+        struct benchmarks list[] = {
+                {&benchmark_nop, 0, "nop"},
+                /*
+                 * benchmark_pushpop{1,3} will have the optimised
+                 * instruction emulation, whilst benchmark_pushpop{2,4} will
+                 * be the equivalent unoptimised instructions.
+                 */
+                {&benchmark_pushpop1, 0, "stmdb sp!, {r3-r11,lr}"},
+                {&benchmark_pushpop1, 4, "ldmia sp!, {r3-r11,pc}"},
+                {&benchmark_pushpop2, 0, "stmdb sp!, {r0-r8,lr}"},
+                {&benchmark_pushpop2, 4, "ldmia sp!, {r0-r8,pc}"},
+                {&benchmark_pushpop3, 0, "stmdb sp!, {r4,lr}"},
+                {&benchmark_pushpop3, 4, "ldmia sp!, {r4,pc}"},
+                {&benchmark_pushpop4, 0, "stmdb sp!, {r0,lr}"},
+                {&benchmark_pushpop4, 4, "ldmia sp!, {r0,pc}"},
+#ifdef CONFIG_THUMB2_KERNEL
+                {&benchmark_pushpop_thumb, 0, "push.n   {r0-r7,lr}"},
+                {&benchmark_pushpop_thumb, 2, "pop.n    {r0-r7,pc}"},
+#endif
+                {0}
+        };
+
+        struct benchmarks *b;
+        for (b = list; b->fn; ++b) {
+                ret = kprobe_benchmark(b->fn, b->offset);
+                if (ret < 0)
+                        return ret;
+                pr_info("    %dns for kprobe %s\n", ret, b->title);
+        }
+
+        pr_info("\n");
+        return 0;
+}
+
+#endif /* BENCHMARKING */
+
+
+/*
+ * Decoding table self-consistency tests
+ */
+
+static const int decode_struct_sizes[NUM_DECODE_TYPES] = {
+        [DECODE_TYPE_TABLE]     = sizeof(struct decode_table),
+        [DECODE_TYPE_CUSTOM]    = sizeof(struct decode_custom),
+        [DECODE_TYPE_SIMULATE]  = sizeof(struct decode_simulate),
+        [DECODE_TYPE_EMULATE]   = sizeof(struct decode_emulate),
+        [DECODE_TYPE_OR]        = sizeof(struct decode_or),
+        [DECODE_TYPE_REJECT]    = sizeof(struct decode_reject)
+};
+
+static int table_iter(const union decode_item *table,
+                        int (*fn)(const struct decode_header *, void *),
+                        void *args)
+{
+        const struct decode_header *h = (struct decode_header *)table;
+        int result;
+
+        for (;;) {
+                enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+                if (type == DECODE_TYPE_END)
+                        return 0;
+
+                result = fn(h, args);
+                if (result)
+                        return result;
+
+                h = (struct decode_header *)
+                        ((uintptr_t)h + decode_struct_sizes[type]);
+
+        }
+}
+
+static int table_test_fail(const struct decode_header *h, const char* message)
+{
+
+        pr_err("FAIL: kprobes test failure \"%s\" (mask %08x, value %08x)\n",
+                                        message, h->mask.bits, h->value.bits);
+        return -EINVAL;
+}
+
+struct table_test_args {
+        const union decode_item *root_table;
+        u32                     parent_mask;
+        u32                     parent_value;
+};
+
+static int table_test_fn(const struct decode_header *h, void *args)
+{
+        struct table_test_args *a = (struct table_test_args *)args;
+        enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+        if (h->value.bits & ~h->mask.bits)
+                return table_test_fail(h, "Match value has bits not in mask");
+
+        if ((h->mask.bits & a->parent_mask) != a->parent_mask)
+                return table_test_fail(h, "Mask has bits not in parent mask");
+
+        if ((h->value.bits ^ a->parent_value) & a->parent_mask)
+                return table_test_fail(h, "Value is inconsistent with parent");
+
+        if (type == DECODE_TYPE_TABLE) {
+                struct decode_table *d = (struct decode_table *)h;
+                struct table_test_args args2 = *a;
+                args2.parent_mask = h->mask.bits;
+                args2.parent_value = h->value.bits;
+                return table_iter(d->table.table, table_test_fn, &args2);
+        }
+
+        return 0;
+}
+
+static int table_test(const union decode_item *table)
+{
+        struct table_test_args args = {
+                .root_table     = table,
+                .parent_mask    = 0,
+                .parent_value   = 0
+        };
+        return table_iter(args.root_table, table_test_fn, &args);
+}
+
+
+/*
+ * Decoding table test coverage analysis
+ *
+ * coverage_start() builds a coverage_table which contains a list of
+ * coverage_entry's to match each entry in the specified kprobes instruction
+ * decoding table.
+ *
+ * When test cases are run, coverage_add() is called to process each case.
+ * This looks up the corresponding entry in the coverage_table and sets it as
+ * being matched, as well as clearing the regs flag appropriate for the test.
+ *
+ * After all test cases have been run, coverage_end() is called to check that
+ * all entries in coverage_table have been matched and that all regs flags are
+ * cleared. I.e. that all possible combinations of instructions described by
+ * the kprobes decoding tables have had a test case executed for them.
+ */
+
+bool coverage_fail;
+
+#define MAX_COVERAGE_ENTRIES 256
+
+struct coverage_entry {
+        const struct decode_header      *header;
+        unsigned                        regs;
+        unsigned                        nesting;
+        char                            matched;
+};
+
+struct coverage_table {
+        struct coverage_entry   *base;
+        unsigned                num_entries;
+        unsigned                nesting;
+};
+
+struct coverage_table coverage;
+
+#define COVERAGE_ANY_REG        (1<<0)
+#define COVERAGE_SP             (1<<1)
+#define COVERAGE_PC             (1<<2)
+#define COVERAGE_PCWB           (1<<3)
+
+static const char coverage_register_lookup[16] = {
+        [REG_TYPE_ANY]          = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
+        [REG_TYPE_SAMEAS16]     = COVERAGE_ANY_REG,
+        [REG_TYPE_SP]           = COVERAGE_SP,
+        [REG_TYPE_PC]           = COVERAGE_PC,
+        [REG_TYPE_NOSP]         = COVERAGE_ANY_REG | COVERAGE_SP,
+        [REG_TYPE_NOSPPC]       = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
+        [REG_TYPE_NOPC]         = COVERAGE_ANY_REG | COVERAGE_PC,
+        [REG_TYPE_NOPCWB]       = COVERAGE_ANY_REG | COVERAGE_PC | COVERAGE_PCWB,
+        [REG_TYPE_NOPCX]        = COVERAGE_ANY_REG,
+        [REG_TYPE_NOSPPCX]      = COVERAGE_ANY_REG | COVERAGE_SP,
+};
+
+unsigned coverage_start_registers(const struct decode_header *h)
+{
+        unsigned regs = 0;
+        int i;
+        for (i = 0; i < 20; i += 4) {
+                int r = (h->type_regs.bits >> (DECODE_TYPE_BITS + i)) & 0xf;
+                regs |= coverage_register_lookup[r] << i;
+        }
+        return regs;
+}
+
+static int coverage_start_fn(const struct decode_header *h, void *args)
+{
+        struct coverage_table *coverage = (struct coverage_table *)args;
+        enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+        struct coverage_entry *entry = coverage->base + coverage->num_entries;
+
+        if (coverage->num_entries == MAX_COVERAGE_ENTRIES - 1) {
+                pr_err("FAIL: Out of space for test coverage data");
+                return -ENOMEM;
+        }
+
+        ++coverage->num_entries;
+
+        entry->header = h;
+        entry->regs = coverage_start_registers(h);
+        entry->nesting = coverage->nesting;
+        entry->matched = false;
+
+        if (type == DECODE_TYPE_TABLE) {
+                struct decode_table *d = (struct decode_table *)h;
+                int ret;
+                ++coverage->nesting;
+                ret = table_iter(d->table.table, coverage_start_fn, coverage);
+                --coverage->nesting;
+                return ret;
+        }
+
+        return 0;
+}
+
+static int coverage_start(const union decode_item *table)
+{
+        coverage.base = kmalloc(MAX_COVERAGE_ENTRIES *
+                                sizeof(struct coverage_entry), GFP_KERNEL);
+        coverage.num_entries = 0;
+        coverage.nesting = 0;
+        return table_iter(table, coverage_start_fn, &coverage);
+}
+
+static void
+coverage_add_registers(struct coverage_entry *entry, kprobe_opcode_t insn)
+{
+        int regs = entry->header->type_regs.bits >> DECODE_TYPE_BITS;
+        int i;
+        for (i = 0; i < 20; i += 4) {
+                enum decode_reg_type reg_type = (regs >> i) & 0xf;
+                int reg = (insn >> i) & 0xf;
+                int flag;
+
+                if (!reg_type)
+                        continue;
+
+                if (reg == 13)
+                        flag = COVERAGE_SP;
+                else if (reg == 15)
+                        flag = COVERAGE_PC;
+                else
+                        flag = COVERAGE_ANY_REG;
+                entry->regs &= ~(flag << i);
+
+                switch (reg_type) {
+
+                case REG_TYPE_NONE:
+                case REG_TYPE_ANY:
+                case REG_TYPE_SAMEAS16:
+                        break;
+
+                case REG_TYPE_SP:
+                        if (reg != 13)
+                                return;
+                        break;
+
+                case REG_TYPE_PC:
+                        if (reg != 15)
+                                return;
+                        break;
+
+                case REG_TYPE_NOSP:
+                        if (reg == 13)
+                                return;
+                        break;
+
+                case REG_TYPE_NOSPPC:
+                case REG_TYPE_NOSPPCX:
+                        if (reg == 13 || reg == 15)
+                                return;
+                        break;
+
+                case REG_TYPE_NOPCWB:
+                        if (!is_writeback(insn))
+                                break;
+                        if (reg == 15) {
+                                entry->regs &= ~(COVERAGE_PCWB << i);
+                                return;
+                        }
+                        break;
+
+                case REG_TYPE_NOPC:
+                case REG_TYPE_NOPCX:
+                        if (reg == 15)
+                                return;
+                        break;
+                }
+
+        }
+}
+
+static void coverage_add(kprobe_opcode_t insn)
+{
+        struct coverage_entry *entry = coverage.base;
+        struct coverage_entry *end = coverage.base + coverage.num_entries;
+        bool matched = false;
+        unsigned nesting = 0;
+
+        for (; entry < end; ++entry) {
+                const struct decode_header *h = entry->header;
+                enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+                if (entry->nesting > nesting)
+                        continue; /* Skip sub-table we didn't match */
+
+                if (entry->nesting < nesting)
+                        break; /* End of sub-table we were scanning */
+
+                if (!matched) {
+                        if ((insn & h->mask.bits) != h->value.bits)
+                                continue;
+                        entry->matched = true;
+                }
+
+                switch (type) {
+
+                case DECODE_TYPE_TABLE:
+                        ++nesting;
+                        break;
+
+                case DECODE_TYPE_CUSTOM:
+                case DECODE_TYPE_SIMULATE:
+                case DECODE_TYPE_EMULATE:
+                        coverage_add_registers(entry, insn);
+                        return;
+
+                case DECODE_TYPE_OR:
+                        matched = true;
+                        break;
+
+                case DECODE_TYPE_REJECT:
+                default:
+                        return;
+                }
+
+        }
+}
+
+static void coverage_end(void)
+{
+        struct coverage_entry *entry = coverage.base;
+        struct coverage_entry *end = coverage.base + coverage.num_entries;
+
+        for (; entry < end; ++entry) {
+                u32 mask = entry->header->mask.bits;
+                u32 value = entry->header->value.bits;
+
+                if (entry->regs) {
+                        pr_err("FAIL: Register test coverage missing for %08x %08x (%05x)\n",
+                                mask, value, entry->regs);
+                        coverage_fail = true;
+                }
+                if (!entry->matched) {
+                        pr_err("FAIL: Test coverage entry missing for %08x %08x\n",
+                                mask, value);
+                        coverage_fail = true;
+                }
+        }
+
+        kfree(coverage.base);
+}
+
+
+/*
+ * Framework for instruction set test cases
+ */
+
+void __naked __kprobes_test_case_start(void)
+{
+        __asm__ __volatile__ (
+                "stmdb  sp!, {r4-r11}                           \n\t"
+                "sub    sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+                "bic    r0, lr, #1  @ r0 = inline title string  \n\t"
+                "mov    r1, sp                                  \n\t"
+                "bl     kprobes_test_case_start                 \n\t"
+                "bx     r0                                      \n\t"
+        );
+}
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+void __naked __kprobes_test_case_end_32(void)
+{
+        __asm__ __volatile__ (
+                "mov    r4, lr                                  \n\t"
+                "bl     kprobes_test_case_end                   \n\t"
+                "cmp    r0, #0                                  \n\t"
+                "movne  pc, r0                                  \n\t"
+                "mov    r0, r4                                  \n\t"
+                "add    sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+                "ldmia  sp!, {r4-r11}                           \n\t"
+                "mov    pc, r0                                  \n\t"
+        );
+}
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+void __naked __kprobes_test_case_end_16(void)
+{
+        __asm__ __volatile__ (
+                "mov    r4, lr                                  \n\t"
+                "bl     kprobes_test_case_end                   \n\t"
+                "cmp    r0, #0                                  \n\t"
+                "bxne   r0                                      \n\t"
+                "mov    r0, r4                                  \n\t"
+                "add    sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+                "ldmia  sp!, {r4-r11}                           \n\t"
+                "bx     r0                                      \n\t"
+        );
+}
+
+void __naked __kprobes_test_case_end_32(void)
+{
+        __asm__ __volatile__ (
+                ".arm                                           \n\t"
+                "orr    lr, lr, #1  @ will return to Thumb code \n\t"
+                "ldr    pc, 1f                                  \n\t"
+                "1:                                             \n\t"
+                ".word  __kprobes_test_case_end_16              \n\t"
+        );
+}
+
+#endif
+
+
+int kprobe_test_flags;
+int kprobe_test_cc_position;
+
+static int test_try_count;
+static int test_pass_count;
+static int test_fail_count;
+
+static struct pt_regs initial_regs;
+static struct pt_regs expected_regs;
+static struct pt_regs result_regs;
+
+static u32 expected_memory[TEST_MEMORY_SIZE/sizeof(u32)];
+
+static const char *current_title;
+static struct test_arg *current_args;
+static u32 *current_stack;
+static uintptr_t current_branch_target;
+
+static uintptr_t current_code_start;
+static kprobe_opcode_t current_instruction;
+
+
+#define TEST_CASE_PASSED -1
+#define TEST_CASE_FAILED -2
+
+static int test_case_run_count;
+static bool test_case_is_thumb;
+static int test_instance;
+
+/*
+ * We ignore the state of the imprecise abort disable flag (CPSR.A) because this
+ * can change randomly as the kernel doesn't take care to preserve or initialise
+ * this across context switches. Also, with Security Extentions, the flag may
+ * not be under control of the kernel; for this reason we ignore the state of
+ * the FIQ disable flag CPSR.F as well.
+ */
+#define PSR_IGNORE_BITS (PSR_A_BIT | PSR_F_BIT)
+
+static unsigned long test_check_cc(int cc, unsigned long cpsr)
+{
+        unsigned long temp;
+
+        switch (cc) {
+        case 0x0: /* eq */
+                return cpsr & PSR_Z_BIT;
+
+        case 0x1: /* ne */
+                return (~cpsr) & PSR_Z_BIT;
+
+        case 0x2: /* cs */
+                return cpsr & PSR_C_BIT;
+
+        case 0x3: /* cc */
+                return (~cpsr) & PSR_C_BIT;
+
+        case 0x4: /* mi */
+                return cpsr & PSR_N_BIT;
+
+        case 0x5: /* pl */
+                return (~cpsr) & PSR_N_BIT;
+
+        case 0x6: /* vs */
+                return cpsr & PSR_V_BIT;
+
+        case 0x7: /* vc */
+                return (~cpsr) & PSR_V_BIT;
+
+        case 0x8: /* hi */
+                cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+                return cpsr & PSR_C_BIT;
+
+        case 0x9: /* ls */
+                cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+                return (~cpsr) & PSR_C_BIT;
+
+        case 0xa: /* ge */
+                cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+                return (~cpsr) & PSR_N_BIT;
+
+        case 0xb: /* lt */
+                cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+                return cpsr & PSR_N_BIT;
+
+        case 0xc: /* gt */
+                temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+                temp |= (cpsr << 1);       /* PSR_N_BIT |= PSR_Z_BIT */
+                return (~temp) & PSR_N_BIT;
+
+        case 0xd: /* le */
+                temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+                temp |= (cpsr << 1);       /* PSR_N_BIT |= PSR_Z_BIT */
+                return temp & PSR_N_BIT;
+
+        case 0xe: /* al */
+        case 0xf: /* unconditional */
+                return true;
+        }
+        BUG();
+        return false;
+}
+
+static int is_last_scenario;
+static int probe_should_run; /* 0 = no, 1 = yes, -1 = unknown */
+static int memory_needs_checking;
+
+static unsigned long test_context_cpsr(int scenario)
+{
+        unsigned long cpsr;
+
+        probe_should_run = 1;
+
+        /* Default case is that we cycle through 16 combinations of flags */
+        cpsr  = (scenario & 0xf) << 28; /* N,Z,C,V flags */
+        cpsr |= (scenario & 0xf) << 16; /* GE flags */
+        cpsr |= (scenario & 0x1) << 27; /* Toggle Q flag */
+
+        if (!test_case_is_thumb) {
+                /* Testing ARM code */
+                probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0;
+                if (scenario == 15)
+                        is_last_scenario = true;
+
+        } else if (kprobe_test_flags & TEST_FLAG_NO_ITBLOCK) {
+                /* Testing Thumb code without setting ITSTATE */
+                if (kprobe_test_cc_position) {
+                        int cc = (current_instruction >> kprobe_test_cc_position) & 0xf;
+                        probe_should_run = test_check_cc(cc, cpsr) != 0;
+                }
+
+                if (scenario == 15)
+                        is_last_scenario = true;
+
+        } else if (kprobe_test_flags & TEST_FLAG_FULL_ITBLOCK) {
+                /* Testing Thumb code with all combinations of ITSTATE */
+                unsigned x = (scenario >> 4);
+                unsigned cond_base = x % 7; /* ITSTATE<7:5> */
+                unsigned mask = x / 7 + 2;  /* ITSTATE<4:0>, bits reversed */
+
+                if (mask > 0x1f) {
+                        /* Finish by testing state from instruction 'itt al' */
+                        cond_base = 7;
+                        mask = 0x4;
+                        if ((scenario & 0xf) == 0xf)
+                                is_last_scenario = true;
+                }
+
+                cpsr |= cond_base << 13;        /* ITSTATE<7:5> */
+                cpsr |= (mask & 0x1) << 12;     /* ITSTATE<4> */
+                cpsr |= (mask & 0x2) << 10;     /* ITSTATE<3> */
+                cpsr |= (mask & 0x4) << 8;      /* ITSTATE<2> */
+                cpsr |= (mask & 0x8) << 23;     /* ITSTATE<1> */
+                cpsr |= (mask & 0x10) << 21;    /* ITSTATE<0> */
+
+                probe_should_run = test_check_cc((cpsr >> 12) & 0xf, cpsr) != 0;
+
+        } else {
+                /* Testing Thumb code with several combinations of ITSTATE */
+                switch (scenario) {
+                case 16: /* Clear NZCV flags and 'it eq' state (false as Z=0) */
+                        cpsr = 0x00000800;
+                        probe_should_run = 0;
+                        break;
+                case 17: /* Set NZCV flags and 'it vc' state (false as V=1) */
+                        cpsr = 0xf0007800;
+                        probe_should_run = 0;
+                        break;
+                case 18: /* Clear NZCV flags and 'it ls' state (true as C=0) */
+                        cpsr = 0x00009800;
+                        break;
+                case 19: /* Set NZCV flags and 'it cs' state (true as C=1) */
+                        cpsr = 0xf0002800;
+                        is_last_scenario = true;
+                        break;
+                }
+        }
+
+        return cpsr;
+}
+
+static void setup_test_context(struct pt_regs *regs)
+{
+        int scenario = test_case_run_count>>1;
+        unsigned long val;
+        struct test_arg *args;
+        int i;
+
+        is_last_scenario = false;
+        memory_needs_checking = false;
+
+        /* Initialise test memory on stack */
+        val = (scenario & 1) ? VALM : ~VALM;
+        for (i = 0; i < TEST_MEMORY_SIZE / sizeof(current_stack[0]); ++i)
+                current_stack[i] = val + (i << 8);
+        /* Put target of branch on stack for tests which load PC from memory */
+        if (current_branch_target)
+                current_stack[15] = current_branch_target;
+        /* Put a value for SP on stack for tests which load SP from memory */
+        current_stack[13] = (u32)current_stack + 120;
+
+        /* Initialise register values to their default state */
+        val = (scenario & 2) ? VALR : ~VALR;
+        for (i = 0; i < 13; ++i)
+                regs->uregs[i] = val ^ (i << 8);
+        regs->ARM_lr = val ^ (14 << 8);
+        regs->ARM_cpsr &= ~(APSR_MASK | PSR_IT_MASK);
+        regs->ARM_cpsr |= test_context_cpsr(scenario);
+
+        /* Perform testcase specific register setup  */
+        args = current_args;
+        for (; args[0].type != ARG_TYPE_END; ++args)
+                switch (args[0].type) {
+                case ARG_TYPE_REG: {
+                        struct test_arg_regptr *arg =
+                                (struct test_arg_regptr *)args;
+                        regs->uregs[arg->reg] = arg->val;
+                        break;
+                }
+                case ARG_TYPE_PTR: {
+                        struct test_arg_regptr *arg =
+                                (struct test_arg_regptr *)args;
+                        regs->uregs[arg->reg] =
+                                (unsigned long)current_stack + arg->val;
+                        memory_needs_checking = true;
+                        break;
+                }
+                case ARG_TYPE_MEM: {
+                        struct test_arg_mem *arg = (struct test_arg_mem *)args;
+                        current_stack[arg->index] = arg->val;
+                        break;
+                }
+                default:
+                        break;
+                }
+}
+
+struct test_probe {
+        struct kprobe   kprobe;
+        bool            registered;
+        int             hit;
+};
+
+static void unregister_test_probe(struct test_probe *probe)
+{
+        if (probe->registered) {
+                unregister_kprobe(&probe->kprobe);
+                probe->kprobe.flags = 0; /* Clear disable flag to allow reuse */
+        }
+        probe->registered = false;
+}
+
+static int register_test_probe(struct test_probe *probe)
+{
+        int ret;
+
+        if (probe->registered)
+                BUG();
+
+        ret = register_kprobe(&probe->kprobe);
+        if (ret >= 0) {
+                probe->registered = true;
+                probe->hit = -1;
+        }
+        return ret;
+}
+
+static int __kprobes
+test_before_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+        container_of(p, struct test_probe, kprobe)->hit = test_instance;
+        return 0;
+}
+
+static void __kprobes
+test_before_post_handler(struct kprobe *p, struct pt_regs *regs,
+                                                        unsigned long flags)
+{
+        setup_test_context(regs);
+        initial_regs = *regs;
+        initial_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
+}
+
+static int __kprobes
+test_case_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+        container_of(p, struct test_probe, kprobe)->hit = test_instance;
+        return 0;
+}
+
+static int __kprobes
+test_after_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+        if (container_of(p, struct test_probe, kprobe)->hit == test_instance)
+                return 0; /* Already run for this test instance */
+
+        result_regs = *regs;
+        result_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
+
+        /* Undo any changes done to SP by the test case */
+        regs->ARM_sp = (unsigned long)current_stack;
+
+        container_of(p, struct test_probe, kprobe)->hit = test_instance;
+        return 0;
+}
+
+static struct test_probe test_before_probe = {
+        .kprobe.pre_handler     = test_before_pre_handler,
+        .kprobe.post_handler    = test_before_post_handler,
+};
+
+static struct test_probe test_case_probe = {
+        .kprobe.pre_handler     = test_case_pre_handler,
+};
+
+static struct test_probe test_after_probe = {
+        .kprobe.pre_handler     = test_after_pre_handler,
+};
+
+static struct test_probe test_after2_probe = {
+        .kprobe.pre_handler     = test_after_pre_handler,
+};
+
+static void test_case_cleanup(void)
+{
+        unregister_test_probe(&test_before_probe);
+        unregister_test_probe(&test_case_probe);
+        unregister_test_probe(&test_after_probe);
+        unregister_test_probe(&test_after2_probe);
+}
+
+static void print_registers(struct pt_regs *regs)
+{
+        pr_err("r0  %08lx | r1  %08lx | r2  %08lx | r3  %08lx\n",
+                regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
+        pr_err("r4  %08lx | r5  %08lx | r6  %08lx | r7  %08lx\n",
+                regs->ARM_r4, regs->ARM_r5, regs->ARM_r6, regs->ARM_r7);
+        pr_err("r8  %08lx | r9  %08lx | r10 %08lx | r11 %08lx\n",
+                regs->ARM_r8, regs->ARM_r9, regs->ARM_r10, regs->ARM_fp);
+        pr_err("r12 %08lx | sp  %08lx | lr  %08lx | pc  %08lx\n",
+                regs->ARM_ip, regs->ARM_sp, regs->ARM_lr, regs->ARM_pc);
+        pr_err("cpsr %08lx\n", regs->ARM_cpsr);
+}
+
+static void print_memory(u32 *mem, size_t size)
+{
+        int i;
+        for (i = 0; i < size / sizeof(u32); i += 4)
+                pr_err("%08x %08x %08x %08x\n", mem[i], mem[i+1],
+                                                mem[i+2], mem[i+3]);
+}
+
+static size_t expected_memory_size(u32 *sp)
+{
+        size_t size = sizeof(expected_memory);
+        int offset = (uintptr_t)sp - (uintptr_t)current_stack;
+        if (offset > 0)
+                size -= offset;
+        return size;
+}
+
+static void test_case_failed(const char *message)
+{
+        test_case_cleanup();
+
+        pr_err("FAIL: %s\n", message);
+        pr_err("FAIL: Test %s\n", current_title);
+        pr_err("FAIL: Scenario %d\n", test_case_run_count >> 1);
+}
+
+static unsigned long next_instruction(unsigned long pc)
+{
+#ifdef CONFIG_THUMB2_KERNEL
+        if ((pc & 1) && !is_wide_instruction(*(u16 *)(pc - 1)))
+                return pc + 2;
+        else
+#endif
+        return pc + 4;
+}
+
+static uintptr_t __used kprobes_test_case_start(const char *title, void *stack)
+{
+        struct test_arg *args;
+        struct test_arg_end *end_arg;
+        unsigned long test_code;
+
+        args = (struct test_arg *)PTR_ALIGN(title + strlen(title) + 1, 4);
+
+        current_title = title;
+        current_args = args;
+        current_stack = stack;
+
+        ++test_try_count;
+
+        while (args->type != ARG_TYPE_END)
+                ++args;
+        end_arg = (struct test_arg_end *)args;
+
+        test_code = (unsigned long)(args + 1); /* Code starts after args */
+
+        test_case_is_thumb = end_arg->flags & ARG_FLAG_THUMB;
+        if (test_case_is_thumb)
+                test_code |= 1;
+
+        current_code_start = test_code;
+
+        current_branch_target = 0;
+        if (end_arg->branch_offset != end_arg->end_offset)
+                current_branch_target = test_code + end_arg->branch_offset;
+
+        test_code += end_arg->code_offset;
+        test_before_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+        test_code = next_instruction(test_code);
+        test_case_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+        if (test_case_is_thumb) {
+                u16 *p = (u16 *)(test_code & ~1);
+                current_instruction = p[0];
+                if (is_wide_instruction(current_instruction)) {
+                        current_instruction <<= 16;
+                        current_instruction |= p[1];
+                }
+        } else {
+                current_instruction = *(u32 *)test_code;
+        }
+
+        if (current_title[0] == '.')
+                verbose("%s\n", current_title);
+        else
+                verbose("%s\t@ %0*x\n", current_title,
+                                        test_case_is_thumb ? 4 : 8,
+                                        current_instruction);
+
+        test_code = next_instruction(test_code);
+        test_after_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+        if (kprobe_test_flags & TEST_FLAG_NARROW_INSTR) {
+                if (!test_case_is_thumb ||
+                        is_wide_instruction(current_instruction)) {
+                                test_case_failed("expected 16-bit instruction");
+                                goto fail;
+                }
+        } else {
+                if (test_case_is_thumb &&
+                        !is_wide_instruction(current_instruction)) {
+                                test_case_failed("expected 32-bit instruction");
+                                goto fail;
+                }
+        }
+
+        coverage_add(current_instruction);
+
+        if (end_arg->flags & ARG_FLAG_UNSUPPORTED) {
+                if (register_test_probe(&test_case_probe) < 0)
+                        goto pass;
+                test_case_failed("registered probe for unsupported instruction");
+                goto fail;
+        }
+
+        if (end_arg->flags & ARG_FLAG_SUPPORTED) {
+                if (register_test_probe(&test_case_probe) >= 0)
+                        goto pass;
+                test_case_failed("couldn't register probe for supported instruction");
+                goto fail;
+        }
+
+        if (register_test_probe(&test_before_probe) < 0) {
+                test_case_failed("register test_before_probe failed");
+                goto fail;
+        }
+        if (register_test_probe(&test_after_probe) < 0) {
+                test_case_failed("register test_after_probe failed");
+                goto fail;
+        }
+        if (current_branch_target) {
+                test_after2_probe.kprobe.addr =
+                                (kprobe_opcode_t *)current_branch_target;
+                if (register_test_probe(&test_after2_probe) < 0) {
+                        test_case_failed("register test_after2_probe failed");
+                        goto fail;
+                }
+        }
+
+        /* Start first run of test case */
+        test_case_run_count = 0;
+        ++test_instance;
+        return current_code_start;
+pass:
+        test_case_run_count = TEST_CASE_PASSED;
+        return (uintptr_t)test_after_probe.kprobe.addr;
+fail:
+        test_case_run_count = TEST_CASE_FAILED;
+        return (uintptr_t)test_after_probe.kprobe.addr;
+}
+
+static bool check_test_results(void)
+{
+        size_t mem_size = 0;
+        u32 *mem = 0;
+
+        if (memcmp(&expected_regs, &result_regs, sizeof(expected_regs))) {
+                test_case_failed("registers differ");
+                goto fail;
+        }
+
+        if (memory_needs_checking) {
+                mem = (u32 *)result_regs.ARM_sp;
+                mem_size = expected_memory_size(mem);
+                if (memcmp(expected_memory, mem, mem_size)) {
+                        test_case_failed("test memory differs");
+                        goto fail;
+                }
+        }
+
+        return true;
+
+fail:
+        pr_err("initial_regs:\n");
+        print_registers(&initial_regs);
+        pr_err("expected_regs:\n");
+        print_registers(&expected_regs);
+        pr_err("result_regs:\n");
+        print_registers(&result_regs);
+
+        if (mem) {
+                pr_err("current_stack=%p\n", current_stack);
+                pr_err("expected_memory:\n");
+                print_memory(expected_memory, mem_size);
+                pr_err("result_memory:\n");
+                print_memory(mem, mem_size);
+        }
+
+        return false;
+}
+
+static uintptr_t __used kprobes_test_case_end(void)
+{
+        if (test_case_run_count < 0) {
+                if (test_case_run_count == TEST_CASE_PASSED)
+                        /* kprobes_test_case_start did all the needed testing */
+                        goto pass;
+                else
+                        /* kprobes_test_case_start failed */
+                        goto fail;
+        }
+
+        if (test_before_probe.hit != test_instance) {
+                test_case_failed("test_before_handler not run");
+                goto fail;
+        }
+
+        if (test_after_probe.hit != test_instance &&
+                                test_after2_probe.hit != test_instance) {
+                test_case_failed("test_after_handler not run");
+                goto fail;
+        }
+
+        /*
+         * Even numbered test runs ran without a probe on the test case so
+         * we can gather reference results. The subsequent odd numbered run
+         * will have the probe inserted.
+        */
+        if ((test_case_run_count & 1) == 0) {
+                /* Save results from run without probe */
+                u32 *mem = (u32 *)result_regs.ARM_sp;
+                expected_regs = result_regs;
+                memcpy(expected_memory, mem, expected_memory_size(mem));
+
+                /* Insert probe onto test case instruction */
+                if (register_test_probe(&test_case_probe) < 0) {
+                        test_case_failed("register test_case_probe failed");
+                        goto fail;
+                }
+        } else {
+                /* Check probe ran as expected */
+                if (probe_should_run == 1) {
+                        if (test_case_probe.hit != test_instance) {
+                                test_case_failed("test_case_handler not run");
+                                goto fail;
+                        }
+                } else if (probe_should_run == 0) {
+                        if (test_case_probe.hit == test_instance) {
+                                test_case_failed("test_case_handler ran");
+                                goto fail;
+                        }
+                }
+
+                /* Remove probe for any subsequent reference run */
+                unregister_test_probe(&test_case_probe);
+
+                if (!check_test_results())
+                        goto fail;
+
+                if (is_last_scenario)
+                        goto pass;
+        }
+
+        /* Do next test run */
+        ++test_case_run_count;
+        ++test_instance;
+        return current_code_start;
+fail:
+        ++test_fail_count;
+        goto end;
+pass:
+        ++test_pass_count;
+end:
+        test_case_cleanup();
+        return 0;
+}
+
+
+/*
+ * Top level test functions
+ */
+
+static int run_test_cases(void (*tests)(void), const union decode_item *table)
+{
+        int ret;
+
+        pr_info("    Check decoding tables\n");
+        ret = table_test(table);
+        if (ret)
+                return ret;
+
+        pr_info("    Run test cases\n");
+        ret = coverage_start(table);
+        if (ret)
+                return ret;
+
+        tests();
+
+        coverage_end();
+        return 0;
+}
+
+
+static int __init run_all_tests(void)
+{
+        int ret = 0;
+
+        pr_info("Begining kprobe tests...\n");
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+        pr_info("Probe ARM code\n");
+        ret = run_api_tests(arm_func);
+        if (ret)
+                goto out;
+
+        pr_info("ARM instruction simulation\n");
+        ret = run_test_cases(kprobe_arm_test_cases, kprobe_decode_arm_table);
+        if (ret)
+                goto out;
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+        pr_info("Probe 16-bit Thumb code\n");
+        ret = run_api_tests(thumb16_func);
+        if (ret)
+                goto out;
+
+        pr_info("Probe 32-bit Thumb code, even halfword\n");
+        ret = run_api_tests(thumb32even_func);
+        if (ret)
+                goto out;
+
+        pr_info("Probe 32-bit Thumb code, odd halfword\n");
+        ret = run_api_tests(thumb32odd_func);
+        if (ret)
+                goto out;
+
+        pr_info("16-bit Thumb instruction simulation\n");
+        ret = run_test_cases(kprobe_thumb16_test_cases,
+                                kprobe_decode_thumb16_table);
+        if (ret)
+                goto out;
+
+        pr_info("32-bit Thumb instruction simulation\n");
+        ret = run_test_cases(kprobe_thumb32_test_cases,
+                                kprobe_decode_thumb32_table);
+        if (ret)
+                goto out;
+#endif
+
+        pr_info("Total instruction simulation tests=%d, pass=%d fail=%d\n",
+                test_try_count, test_pass_count, test_fail_count);
+        if (test_fail_count) {
+                ret = -EINVAL;
+                goto out;
+        }
+
+#if BENCHMARKING
+        pr_info("Benchmarks\n");
+        ret = run_benchmarks();
+        if (ret)
+                goto out;
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+        /* We are able to run all test cases so coverage should be complete */
+        if (coverage_fail) {
+                pr_err("FAIL: Test coverage checks failed\n");
+                ret = -EINVAL;
+                goto out;
+        }
+#endif
+
+out:
+        if (ret == 0)
+                pr_info("Finished kprobe tests OK\n");
+        else
+                pr_err("kprobe tests failed\n");
+
+        return ret;
+}
+
+
+/*
+ * Module setup
+ */
+
+#ifdef MODULE
+
+static void __exit kprobe_test_exit(void)
+{
+}
+
+module_init(run_all_tests)
+module_exit(kprobe_test_exit)
+MODULE_LICENSE("GPL");
+
+#else /* !MODULE */
+
+late_initcall(run_all_tests);
+
+#endif
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h
new file mode 100644
index 000000000000..0dc5d77b9356
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test.h
@@ -0,0 +1,392 @@
+/*
+ * arch/arm/kernel/kprobes-test.h
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define VERBOSE 0 /* Set to '1' for more logging of test cases */
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define NORMAL_ISA "16"
+#else
+#define NORMAL_ISA "32"
+#endif
+
+
+/* Flags used in kprobe_test_flags */
+#define TEST_FLAG_NO_ITBLOCK    (1<<0)
+#define TEST_FLAG_FULL_ITBLOCK  (1<<1)
+#define TEST_FLAG_NARROW_INSTR  (1<<2)
+
+extern int kprobe_test_flags;
+extern int kprobe_test_cc_position;
+
+
+#define TEST_MEMORY_SIZE 256
+
+
+/*
+ * Test case structures.
+ *
+ * The arguments given to test cases can be one of three types.
+ *
+ *   ARG_TYPE_REG
+ *      Load a register with the given value.
+ *
+ *   ARG_TYPE_PTR
+ *      Load a register with a pointer into the stack buffer (SP + given value).
+ *
+ *   ARG_TYPE_MEM
+ *      Store the given value into the stack buffer at [SP+index].
+ *
+ */
+
+#define ARG_TYPE_END    0
+#define ARG_TYPE_REG    1
+#define ARG_TYPE_PTR    2
+#define ARG_TYPE_MEM    3
+
+#define ARG_FLAG_UNSUPPORTED    0x01
+#define ARG_FLAG_SUPPORTED      0x02
+#define ARG_FLAG_THUMB          0x10    /* Must be 16 so TEST_ISA can be used */
+#define ARG_FLAG_ARM            0x20    /* Must be 32 so TEST_ISA can be used */
+
+struct test_arg {
+        u8      type;           /* ARG_TYPE_x */
+        u8      _padding[7];
+};
+
+struct test_arg_regptr {
+        u8      type;           /* ARG_TYPE_REG or ARG_TYPE_PTR */
+        u8      reg;
+        u8      _padding[2];
+        u32     val;
+};
+
+struct test_arg_mem {
+        u8      type;           /* ARG_TYPE_MEM */
+        u8      index;
+        u8      _padding[2];
+        u32     val;
+};
+
+struct test_arg_end {
+        u8      type;           /* ARG_TYPE_END */
+        u8      flags;          /* ARG_FLAG_x */
+        u16     code_offset;
+        u16     branch_offset;
+        u16     end_offset;
+};
+
+
+/*
+ * Building blocks for test cases.
+ *
+ * Each test case is wrapped between TESTCASE_START and TESTCASE_END.
+ *
+ * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are
+ * used followed by a terminating TEST_ARG_END.
+ *
+ * After this, the instruction to be tested is defined with TEST_INSTRUCTION.
+ * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards).
+ *
+ * Some specific test cases may make use of other custom constructs.
+ */
+
+#if VERBOSE
+#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__)
+#else
+#define verbose(fmt, ...)
+#endif
+
+#define TEST_GROUP(title)                                       \
+        verbose("\n");                                          \
+        verbose(title"\n");                                     \
+        verbose("---------------------------------------------------------\n");
+
+#define TESTCASE_START(title)                                   \
+        __asm__ __volatile__ (                                  \
+        "bl     __kprobes_test_case_start               \n\t"   \
+        /* don't use .asciz here as 'title' may be */           \
+        /* multiple strings to be concatenated.  */             \
+        ".ascii "#title"                                \n\t"   \
+        ".byte  0                                       \n\t"   \
+        ".align 2                                       \n\t"
+
+#define TEST_ARG_REG(reg, val)                                  \
+        ".byte  "__stringify(ARG_TYPE_REG)"             \n\t"   \
+        ".byte  "#reg"                                  \n\t"   \
+        ".short 0                                       \n\t"   \
+        ".word  "#val"                                  \n\t"
+
+#define TEST_ARG_PTR(reg, val)                                  \
+        ".byte  "__stringify(ARG_TYPE_PTR)"             \n\t"   \
+        ".byte  "#reg"                                  \n\t"   \
+        ".short 0                                       \n\t"   \
+        ".word  "#val"                                  \n\t"
+
+#define TEST_ARG_MEM(index, val)                                \
+        ".byte  "__stringify(ARG_TYPE_MEM)"             \n\t"   \
+        ".byte  "#index"                                \n\t"   \
+        ".short 0                                       \n\t"   \
+        ".word  "#val"                                  \n\t"
+
+#define TEST_ARG_END(flags)                                     \
+        ".byte  "__stringify(ARG_TYPE_END)"             \n\t"   \
+        ".byte  "TEST_ISA flags"                        \n\t"   \
+        ".short 50f-0f                                  \n\t"   \
+        ".short 2f-0f                                   \n\t"   \
+        ".short 99f-0f                                  \n\t"   \
+        ".code "TEST_ISA"                               \n\t"   \
+        "0:                                             \n\t"
+
+#define TEST_INSTRUCTION(instruction)                           \
+        "50:    nop                                     \n\t"   \
+        "1:     "instruction"                           \n\t"   \
+        "       nop                                     \n\t"
+
+#define TEST_BRANCH_F(instruction, xtra_dist)                   \
+        TEST_INSTRUCTION(instruction)                           \
+        ".if "#xtra_dist"                               \n\t"   \
+        "       b       99f                             \n\t"   \
+        ".space "#xtra_dist"                            \n\t"   \
+        ".endif                                         \n\t"   \
+        "       b       99f                             \n\t"   \
+        "2:     nop                                     \n\t"
+
+#define TEST_BRANCH_B(instruction, xtra_dist)                   \
+        "       b       50f                             \n\t"   \
+        "       b       99f                             \n\t"   \
+        "2:     nop                                     \n\t"   \
+        "       b       99f                             \n\t"   \
+        ".if "#xtra_dist"                               \n\t"   \
+        ".space "#xtra_dist"                            \n\t"   \
+        ".endif                                         \n\t"   \
+        TEST_INSTRUCTION(instruction)
+
+#define TESTCASE_END                                            \
+        "2:                                             \n\t"   \
+        "99:                                            \n\t"   \
+        "       bl __kprobes_test_case_end_"TEST_ISA"   \n\t"   \
+        ".code "NORMAL_ISA"                             \n\t"   \
+        : :                                                     \
+        : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc"    \
+        );
+
+
+/*
+ * Macros to define test cases.
+ *
+ * Those of the form TEST_{R,P,M}* can be used to define test cases
+ * which take combinations of the three basic types of arguments. E.g.
+ *
+ *   TEST_R     One register argument
+ *   TEST_RR    Two register arguments
+ *   TEST_RPR   A register, a pointer, then a register argument
+ *
+ * For testing instructions which may branch, there are macros TEST_BF_*
+ * and TEST_BB_* for branching forwards and backwards.
+ *
+ * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed,
+ * the just verify that a kprobe is or is not allowed on the given instruction.
+ */
+
+#define TEST(code)                              \
+        TESTCASE_START(code)                    \
+        TEST_ARG_END("")                        \
+        TEST_INSTRUCTION(code)                  \
+        TESTCASE_END
+
+#define TEST_UNSUPPORTED(code)                                  \
+        TESTCASE_START(code)                                    \
+        TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED))      \
+        TEST_INSTRUCTION(code)                                  \
+        TESTCASE_END
+
+#define TEST_SUPPORTED(code)                                    \
+        TESTCASE_START(code)                                    \
+        TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED))        \
+        TEST_INSTRUCTION(code)                                  \
+        TESTCASE_END
+
+#define TEST_R(code1, reg, val, code2)                  \
+        TESTCASE_START(code1 #reg code2)                \
+        TEST_ARG_REG(reg, val)                          \
+        TEST_ARG_END("")                                \
+        TEST_INSTRUCTION(code1 #reg code2)              \
+        TESTCASE_END
+
+#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3)    \
+        TESTCASE_START(code1 #reg1 code2 #reg2 code3)           \
+        TEST_ARG_REG(reg1, val1)                                \
+        TEST_ARG_REG(reg2, val2)                                \
+        TEST_ARG_END("")                                        \
+        TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3)         \
+        TESTCASE_END
+
+#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+        TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)               \
+        TEST_ARG_REG(reg1, val1)                                                \
+        TEST_ARG_REG(reg2, val2)                                                \
+        TEST_ARG_REG(reg3, val3)                                                \
+        TEST_ARG_END("")                                                        \
+        TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)             \
+        TESTCASE_END
+
+#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4)   \
+        TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4)         \
+        TEST_ARG_REG(reg1, val1)                                                \
+        TEST_ARG_REG(reg2, val2)                                                \
+        TEST_ARG_REG(reg3, val3)                                                \
+        TEST_ARG_REG(reg4, val4)                                                \
+        TEST_ARG_END("")                                                        \
+        TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4)       \
+        TESTCASE_END
+
+#define TEST_P(code1, reg1, val1, code2)        \
+        TESTCASE_START(code1 #reg1 code2)       \
+        TEST_ARG_PTR(reg1, val1)                \
+        TEST_ARG_END("")                        \
+        TEST_INSTRUCTION(code1 #reg1 code2)     \
+        TESTCASE_END
+
+#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3)    \
+        TESTCASE_START(code1 #reg1 code2 #reg2 code3)           \
+        TEST_ARG_PTR(reg1, val1)                                \
+        TEST_ARG_REG(reg2, val2)                                \
+        TEST_ARG_END("")                                        \
+        TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3)         \
+        TESTCASE_END
+
+#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3)    \
+        TESTCASE_START(code1 #reg1 code2 #reg2 code3)           \
+        TEST_ARG_REG(reg1, val1)                                \
+        TEST_ARG_PTR(reg2, val2)                                \
+        TEST_ARG_END("")                                        \
+        TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3)         \
+        TESTCASE_END
+
+#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+        TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)               \
+        TEST_ARG_PTR(reg1, val1)                                                \
+        TEST_ARG_REG(reg2, val2)                                                \
+        TEST_ARG_REG(reg3, val3)                                                \
+        TEST_ARG_END("")                                                        \
+        TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)             \
+        TESTCASE_END
+
+#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+        TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)               \
+        TEST_ARG_REG(reg1, val1)                                                \
+        TEST_ARG_PTR(reg2, val2)                                                \
+        TEST_ARG_REG(reg3, val3)                                                \
+        TEST_ARG_END("")                                                        \
+        TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)             \
+        TESTCASE_END
+
+#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+        TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)               \
+        TEST_ARG_REG(reg1, val1)                                                \
+        TEST_ARG_REG(reg2, val2)                                                \
+        TEST_ARG_PTR(reg3, val3)                                                \
+        TEST_ARG_END("")                                                        \
+        TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)             \
+        TESTCASE_END
+
+#define TEST_BF_P(code1, reg1, val1, code2)     \
+        TESTCASE_START(code1 #reg1 code2)       \
+        TEST_ARG_PTR(reg1, val1)                \
+        TEST_ARG_END("")                        \
+        TEST_BRANCH_F(code1 #reg1 code2, 0)     \
+        TESTCASE_END
+
+#define TEST_BF_X(code, xtra_dist)              \
+        TESTCASE_START(code)                    \
+        TEST_ARG_END("")                        \
+        TEST_BRANCH_F(code, xtra_dist)          \
+        TESTCASE_END
+
+#define TEST_BB_X(code, xtra_dist)              \
+        TESTCASE_START(code)                    \
+        TEST_ARG_END("")                        \
+        TEST_BRANCH_B(code, xtra_dist)          \
+        TESTCASE_END
+
+#define TEST_BF_RX(code1, reg, val, code2, xtra_dist)   \
+        TESTCASE_START(code1 #reg code2)                \
+        TEST_ARG_REG(reg, val)                          \
+        TEST_ARG_END("")                                \
+        TEST_BRANCH_F(code1 #reg code2, xtra_dist)      \
+        TESTCASE_END
+
+#define TEST_BB_RX(code1, reg, val, code2, xtra_dist)   \
+        TESTCASE_START(code1 #reg code2)                \
+        TEST_ARG_REG(reg, val)                          \
+        TEST_ARG_END("")                                \
+        TEST_BRANCH_B(code1 #reg code2, xtra_dist)      \
+        TESTCASE_END
+
+#define TEST_BF(code)   TEST_BF_X(code, 0)
+#define TEST_BB(code)   TEST_BB_X(code, 0)
+
+#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
+#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
+
+#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \
+        TESTCASE_START(code1 #reg1 code2 #reg2 code3)           \
+        TEST_ARG_REG(reg1, val1)                                \
+        TEST_ARG_REG(reg2, val2)                                \
+        TEST_ARG_END("")                                        \
+        TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0)         \
+        TESTCASE_END
+
+#define TEST_X(code, codex)                     \
+        TESTCASE_START(code)                    \
+        TEST_ARG_END("")                        \
+        TEST_INSTRUCTION(code)                  \
+        "       b       99f             \n\t"   \
+        "       "codex"                 \n\t"   \
+        TESTCASE_END
+
+#define TEST_RX(code1, reg, val, code2, codex)          \
+        TESTCASE_START(code1 #reg code2)                \
+        TEST_ARG_REG(reg, val)                          \
+        TEST_ARG_END("")                                \
+        TEST_INSTRUCTION(code1 __stringify(reg) code2)  \
+        "       b       99f             \n\t"           \
+        "       "codex"                 \n\t"           \
+        TESTCASE_END
+
+#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex)            \
+        TESTCASE_START(code1 #reg1 code2 #reg2 code3)                           \
+        TEST_ARG_REG(reg1, val1)                                                \
+        TEST_ARG_REG(reg2, val2)                                                \
+        TEST_ARG_END("")                                                        \
+        TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3) \
+        "       b       99f             \n\t"                                   \
+        "       "codex"                 \n\t"                                   \
+        TESTCASE_END
+
+
+/* Various values used in test cases... */
+#define N(val)  (val ^ 0xffffffff)
+#define VAL1    0x12345678
+#define VAL2    N(VAL1)
+#define VAL3    0xa5f801
+#define VAL4    N(VAL3)
+#define VALM    0x456789ab
+#define VALR    0xdeaddead
+#define HH1     0x0123fecb
+#define HH2     0xa9874567
+
+
+#ifdef CONFIG_THUMB2_KERNEL
+void kprobe_thumb16_test_cases(void);
+void kprobe_thumb32_test_cases(void);
+#else
+void kprobe_arm_test_cases(void);
+#endif
diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c
index 902ca59e8b11..8f96ec778e8d 100644
--- a/arch/arm/kernel/kprobes-thumb.c
+++ b/arch/arm/kernel/kprobes-thumb.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
+#include <linux/module.h>
 
 #include "kprobes.h"
 
@@ -943,6 +944,9 @@ const union decode_item kprobe_decode_thumb32_table[] = {
          */
         DECODE_END
 };
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_thumb32_table);
+#endif
 
 static void __kprobes
 t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs)
@@ -1423,6 +1427,9 @@ const union decode_item kprobe_decode_thumb16_table[] = {
 
         DECODE_END
 };
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_thumb16_table);
+#endif
 
 static unsigned long __kprobes thumb_check_cc(unsigned long cpsr)
 {
diff --git a/arch/arm/kernel/kprobes.h b/arch/arm/kernel/kprobes.h
index a6aeda0a6c7f..38945f78f9f1 100644
--- a/arch/arm/kernel/kprobes.h
+++ b/arch/arm/kernel/kprobes.h
@@ -413,6 +413,14 @@ struct decode_reject {
         DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0)
 
 
+#ifdef CONFIG_THUMB2_KERNEL
+extern const union decode_item kprobe_decode_thumb16_table[];
+extern const union decode_item kprobe_decode_thumb32_table[];
+#else
+extern const union decode_item kprobe_decode_arm_table[];
+#endif
+
+
 int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
                         const union decode_item *table, bool thumb16);
 
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 53c9c2610cbc..e6e5d7c84f1a 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -12,6 +12,7 @@
  */
 #define pr_fmt(fmt) "hw perfevents: " fmt
 
+#include <linux/bitmap.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -26,16 +27,8 @@
 #include <asm/pmu.h>
 #include <asm/stacktrace.h>
 
-static struct platform_device *pmu_device;
-
-/*
- * Hardware lock to serialize accesses to PMU registers. Needed for the
- * read/modify/write sequences.
- */
-static DEFINE_RAW_SPINLOCK(pmu_lock);
-
 /*
- * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
+ * ARMv6 supports a maximum of 3 events, starting from index 0. If we add
  * another platform that supports more, we need to increase this to be the
  * largest of all platforms.
  *
@@ -43,62 +36,24 @@ static DEFINE_RAW_SPINLOCK(pmu_lock);
  *  cycle counter CCNT + 31 events counters CNT0..30.
  *  Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
  */
-#define ARMPMU_MAX_HWEVENTS             33
+#define ARMPMU_MAX_HWEVENTS             32
 
-/* The events for a given CPU. */
-struct cpu_hw_events {
-        /*
-         * The events that are active on the CPU for the given index. Index 0
-         * is reserved.
-         */
-        struct perf_event       *events[ARMPMU_MAX_HWEVENTS];
-
-        /*
-         * A 1 bit for an index indicates that the counter is being used for
-         * an event. A 0 means that the counter can be used.
-         */
-        unsigned long           used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
+static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
+static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
+static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
 
-        /*
-         * A 1 bit for an index indicates that the counter is actively being
-         * used.
-         */
-        unsigned long           active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
-};
-static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-struct arm_pmu {
-        enum arm_perf_pmu_ids id;
-        const char      *name;
-        irqreturn_t     (*handle_irq)(int irq_num, void *dev);
-        void            (*enable)(struct hw_perf_event *evt, int idx);
-        void            (*disable)(struct hw_perf_event *evt, int idx);
-        int             (*get_event_idx)(struct cpu_hw_events *cpuc,
-                                         struct hw_perf_event *hwc);
-        u32             (*read_counter)(int idx);
-        void            (*write_counter)(int idx, u32 val);
-        void            (*start)(void);
-        void            (*stop)(void);
-        void            (*reset)(void *);
-        const unsigned  (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
-                                    [PERF_COUNT_HW_CACHE_OP_MAX]
-                                    [PERF_COUNT_HW_CACHE_RESULT_MAX];
-        const unsigned  (*event_map)[PERF_COUNT_HW_MAX];
-        u32             raw_event_mask;
-        int             num_events;
-        u64             max_period;
-};
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
 
 /* Set at runtime when we know what CPU type we are. */
-static const struct arm_pmu *armpmu;
+static struct arm_pmu *cpu_pmu;
 
 enum arm_perf_pmu_ids
 armpmu_get_pmu_id(void)
 {
         int id = -ENODEV;
 
-        if (armpmu != NULL)
-                id = armpmu->id;
+        if (cpu_pmu != NULL)
+                id = cpu_pmu->id;
 
         return id;
 }
@@ -109,8 +64,8 @@ armpmu_get_max_events(void)
 {
         int max_events = 0;
 
-        if (armpmu != NULL)
-                max_events = armpmu->num_events;
+        if (cpu_pmu != NULL)
+                max_events = cpu_pmu->num_events;
 
         return max_events;
 }
@@ -130,7 +85,11 @@ EXPORT_SYMBOL_GPL(perf_num_counters);
 #define CACHE_OP_UNSUPPORTED            0xFFFF
 
 static int
-armpmu_map_cache_event(u64 config)
+armpmu_map_cache_event(const unsigned (*cache_map)
+                                      [PERF_COUNT_HW_CACHE_MAX]
+                                      [PERF_COUNT_HW_CACHE_OP_MAX]
+                                      [PERF_COUNT_HW_CACHE_RESULT_MAX],
+                       u64 config)
 {
         unsigned int cache_type, cache_op, cache_result, ret;
 
@@ -146,7 +105,7 @@ armpmu_map_cache_event(u64 config)
         if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
                 return -EINVAL;
 
-        ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result];
+        ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
 
         if (ret == CACHE_OP_UNSUPPORTED)
                 return -ENOENT;
@@ -155,23 +114,46 @@ armpmu_map_cache_event(u64 config)
 }
 
 static int
-armpmu_map_event(u64 config)
+armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
 {
-        int mapping = (*armpmu->event_map)[config];
-        return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping;
+        int mapping = (*event_map)[config];
+        return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
 }
 
 static int
-armpmu_map_raw_event(u64 config)
+armpmu_map_raw_event(u32 raw_event_mask, u64 config)
 {
-        return (int)(config & armpmu->raw_event_mask);
+        return (int)(config & raw_event_mask);
 }
 
-static int
+static int map_cpu_event(struct perf_event *event,
+                         const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+                         const unsigned (*cache_map)
+                                        [PERF_COUNT_HW_CACHE_MAX]
+                                        [PERF_COUNT_HW_CACHE_OP_MAX]
+                                        [PERF_COUNT_HW_CACHE_RESULT_MAX],
+                         u32 raw_event_mask)
+{
+        u64 config = event->attr.config;
+
+        switch (event->attr.type) {
+        case PERF_TYPE_HARDWARE:
+                return armpmu_map_event(event_map, config);
+        case PERF_TYPE_HW_CACHE:
+                return armpmu_map_cache_event(cache_map, config);
+        case PERF_TYPE_RAW:
+                return armpmu_map_raw_event(raw_event_mask, config);
+        }
+
+        return -ENOENT;
+}
+
+int
 armpmu_event_set_period(struct perf_event *event,
                         struct hw_perf_event *hwc,
                         int idx)
 {
+        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
         s64 left = local64_read(&hwc->period_left);
         s64 period = hwc->sample_period;
         int ret = 0;
@@ -202,11 +184,12 @@ armpmu_event_set_period(struct perf_event *event,
         return ret;
 }
 
-static u64
+u64
 armpmu_event_update(struct perf_event *event,
                     struct hw_perf_event *hwc,
                     int idx, int overflow)
 {
+        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
         u64 delta, prev_raw_count, new_raw_count;
 
 again:
@@ -246,11 +229,9 @@ armpmu_read(struct perf_event *event)
 static void
 armpmu_stop(struct perf_event *event, int flags)
 {
+        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
         struct hw_perf_event *hwc = &event->hw;
 
-        if (!armpmu)
-                return;
-
         /*
          * ARM pmu always has to update the counter, so ignore
          * PERF_EF_UPDATE, see comments in armpmu_start().
@@ -266,11 +247,9 @@ armpmu_stop(struct perf_event *event, int flags)
 static void
 armpmu_start(struct perf_event *event, int flags)
 {
+        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
         struct hw_perf_event *hwc = &event->hw;
 
-        if (!armpmu)
-                return;
-
         /*
          * ARM pmu always has to reprogram the period, so ignore
          * PERF_EF_RELOAD, see the comment below.
@@ -293,16 +272,16 @@ armpmu_start(struct perf_event *event, int flags)
 static void
 armpmu_del(struct perf_event *event, int flags)
 {
-        struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+        struct pmu_hw_events *hw_events = armpmu->get_hw_events();
         struct hw_perf_event *hwc = &event->hw;
         int idx = hwc->idx;
 
         WARN_ON(idx < 0);
 
-        clear_bit(idx, cpuc->active_mask);
         armpmu_stop(event, PERF_EF_UPDATE);
-        cpuc->events[idx] = NULL;
-        clear_bit(idx, cpuc->used_mask);
+        hw_events->events[idx] = NULL;
+        clear_bit(idx, hw_events->used_mask);
 
         perf_event_update_userpage(event);
 }
@@ -310,7 +289,8 @@ armpmu_del(struct perf_event *event, int flags)
 static int
 armpmu_add(struct perf_event *event, int flags)
 {
-        struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+        struct pmu_hw_events *hw_events = armpmu->get_hw_events();
         struct hw_perf_event *hwc = &event->hw;
         int idx;
         int err = 0;
@@ -318,7 +298,7 @@ armpmu_add(struct perf_event *event, int flags)
         perf_pmu_disable(event->pmu);
 
         /* If we don't have a space for the counter then finish early. */
-        idx = armpmu->get_event_idx(cpuc, hwc);
+        idx = armpmu->get_event_idx(hw_events, hwc);
         if (idx < 0) {
                 err = idx;
                 goto out;
@@ -330,8 +310,7 @@ armpmu_add(struct perf_event *event, int flags)
          */
         event->hw.idx = idx;
         armpmu->disable(hwc, idx);
-        cpuc->events[idx] = event;
-        set_bit(idx, cpuc->active_mask);
+        hw_events->events[idx] = event;
 
         hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
         if (flags & PERF_EF_START)
@@ -345,25 +324,25 @@ out:
         return err;
 }
 
-static struct pmu pmu;
-
 static int
-validate_event(struct cpu_hw_events *cpuc,
+validate_event(struct pmu_hw_events *hw_events,
                struct perf_event *event)
 {
+        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
         struct hw_perf_event fake_event = event->hw;
+        struct pmu *leader_pmu = event->group_leader->pmu;
 
-        if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+        if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
                 return 1;
 
-        return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
+        return armpmu->get_event_idx(hw_events, &fake_event) >= 0;
 }
 
 static int
 validate_group(struct perf_event *event)
 {
         struct perf_event *sibling, *leader = event->group_leader;
-        struct cpu_hw_events fake_pmu;
+        struct pmu_hw_events fake_pmu;
 
         memset(&fake_pmu, 0, sizeof(fake_pmu));
 
@@ -383,110 +362,119 @@ validate_group(struct perf_event *event)
 
 static irqreturn_t armpmu_platform_irq(int irq, void *dev)
 {
-        struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev);
+        struct arm_pmu *armpmu = (struct arm_pmu *) dev;
+        struct platform_device *plat_device = armpmu->plat_device;
+        struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev);
 
         return plat->handle_irq(irq, dev, armpmu->handle_irq);
 }
 
+static void
+armpmu_release_hardware(struct arm_pmu *armpmu)
+{
+        int i, irq, irqs;
+        struct platform_device *pmu_device = armpmu->plat_device;
+
+        irqs = min(pmu_device->num_resources, num_possible_cpus());
+
+        for (i = 0; i < irqs; ++i) {
+                if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
+                        continue;
+                irq = platform_get_irq(pmu_device, i);
+                if (irq >= 0)
+                        free_irq(irq, armpmu);
+        }
+
+        release_pmu(armpmu->type);
+}
+
 static int
-armpmu_reserve_hardware(void)
+armpmu_reserve_hardware(struct arm_pmu *armpmu)
 {
         struct arm_pmu_platdata *plat;
         irq_handler_t handle_irq;
-        int i, err = -ENODEV, irq;
+        int i, err, irq, irqs;
+        struct platform_device *pmu_device = armpmu->plat_device;
 
-        pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU);
-        if (IS_ERR(pmu_device)) {
+        err = reserve_pmu(armpmu->type);
+        if (err) {
                 pr_warning("unable to reserve pmu\n");
-                return PTR_ERR(pmu_device);
+                return err;
         }
 
-        init_pmu(ARM_PMU_DEVICE_CPU);
-
         plat = dev_get_platdata(&pmu_device->dev);
         if (plat && plat->handle_irq)
                 handle_irq = armpmu_platform_irq;
         else
                 handle_irq = armpmu->handle_irq;
 
-        if (pmu_device->num_resources < 1) {
+        irqs = min(pmu_device->num_resources, num_possible_cpus());
+        if (irqs < 1) {
                 pr_err("no irqs for PMUs defined\n");
                 return -ENODEV;
         }
 
-        for (i = 0; i < pmu_device->num_resources; ++i) {
+        for (i = 0; i < irqs; ++i) {
+                err = 0;
                 irq = platform_get_irq(pmu_device, i);
                 if (irq < 0)
                         continue;
 
+                /*
+                 * If we have a single PMU interrupt that we can't shift,
+                 * assume that we're running on a uniprocessor machine and
+                 * continue. Otherwise, continue without this interrupt.
+                 */
+                if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+                        pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+                                    irq, i);
+                        continue;
+                }
+
                 err = request_irq(irq, handle_irq,
                                   IRQF_DISABLED | IRQF_NOBALANCING,
-                                  "armpmu", NULL);
+                                  "arm-pmu", armpmu);
                 if (err) {
-                        pr_warning("unable to request IRQ%d for ARM perf "
-                                "counters\n", irq);
-                        break;
+                        pr_err("unable to request IRQ%d for ARM PMU counters\n",
+                                irq);
+                        armpmu_release_hardware(armpmu);
+                        return err;
                 }
-        }
 
-        if (err) {
-                for (i = i - 1; i >= 0; --i) {
-                        irq = platform_get_irq(pmu_device, i);
-                        if (irq >= 0)
-                                free_irq(irq, NULL);
-                }
-                release_pmu(ARM_PMU_DEVICE_CPU);
-                pmu_device = NULL;
+                cpumask_set_cpu(i, &armpmu->active_irqs);
         }
 
-        return err;
+        return 0;
 }
 
 static void
-armpmu_release_hardware(void)
+hw_perf_event_destroy(struct perf_event *event)
 {
-        int i, irq;
+        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+        atomic_t *active_events  = &armpmu->active_events;
+        struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex;
 
-        for (i = pmu_device->num_resources - 1; i >= 0; --i) {
-                irq = platform_get_irq(pmu_device, i);
-                if (irq >= 0)
-                        free_irq(irq, NULL);
+        if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) {
+                armpmu_release_hardware(armpmu);
+                mutex_unlock(pmu_reserve_mutex);
         }
-        armpmu->stop();
-
-        release_pmu(ARM_PMU_DEVICE_CPU);
-        pmu_device = NULL;
 }
 
-static atomic_t active_events = ATOMIC_INIT(0);
-static DEFINE_MUTEX(pmu_reserve_mutex);
-
-static void
-hw_perf_event_destroy(struct perf_event *event)
+static int
+event_requires_mode_exclusion(struct perf_event_attr *attr)
 {
-        if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) {
-                armpmu_release_hardware();
-                mutex_unlock(&pmu_reserve_mutex);
-        }
+        return attr->exclude_idle || attr->exclude_user ||
+               attr->exclude_kernel || attr->exclude_hv;
 }
 
 static int
 __hw_perf_event_init(struct perf_event *event)
 {
+        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
         struct hw_perf_event *hwc = &event->hw;
         int mapping, err;
 
-        /* Decode the generic type into an ARM event identifier. */
-        if (PERF_TYPE_HARDWARE == event->attr.type) {
-                mapping = armpmu_map_event(event->attr.config);
-        } else if (PERF_TYPE_HW_CACHE == event->attr.type) {
-                mapping = armpmu_map_cache_event(event->attr.config);
-        } else if (PERF_TYPE_RAW == event->attr.type) {
-                mapping = armpmu_map_raw_event(event->attr.config);
-        } else {
-                pr_debug("event type %x not supported\n", event->attr.type);
-                return -EOPNOTSUPP;
-        }
+        mapping = armpmu->map_event(event);
 
         if (mapping < 0) {
                 pr_debug("event %x:%llx not supported\n", event->attr.type,
@@ -495,34 +483,31 @@ __hw_perf_event_init(struct perf_event *event)
         }
 
         /*
+         * We don't assign an index until we actually place the event onto
+         * hardware. Use -1 to signify that we haven't decided where to put it
+         * yet. For SMP systems, each core has it's own PMU so we can't do any
+         * clever allocation or constraints checking at this point.
+         */
+        hwc->idx                = -1;
+        hwc->config_base        = 0;
+        hwc->config             = 0;
+        hwc->event_base         = 0;
+
+        /*
          * Check whether we need to exclude the counter from certain modes.
-         * The ARM performance counters are on all of the time so if someone
-         * has asked us for some excludes then we have to fail.
          */
-        if (event->attr.exclude_kernel || event->attr.exclude_user ||
-            event->attr.exclude_hv || event->attr.exclude_idle) {
+        if ((!armpmu->set_event_filter ||
+             armpmu->set_event_filter(hwc, &event->attr)) &&
+             event_requires_mode_exclusion(&event->attr)) {
                 pr_debug("ARM performance counters do not support "
                          "mode exclusion\n");
                 return -EPERM;
         }
 
         /*
-         * We don't assign an index until we actually place the event onto
-         * hardware. Use -1 to signify that we haven't decided where to put it
-         * yet. For SMP systems, each core has it's own PMU so we can't do any
-         * clever allocation or constraints checking at this point.
+         * Store the event encoding into the config_base field.
          */
-        hwc->idx = -1;
-
-        /*
-         * Store the event encoding into the config_base field. config and
-         * event_base are unused as the only 2 things we need to know are
-         * the event mapping and the counter to use. The counter to use is
-         * also the indx and the config_base is the event type.
-         */
-        hwc->config_base            = (unsigned long)mapping;
-        hwc->config                 = 0;
-        hwc->event_base             = 0;
+        hwc->config_base            |= (unsigned long)mapping;
 
         if (!hwc->sample_period) {
                 hwc->sample_period  = armpmu->max_period;
@@ -542,32 +527,23 @@ __hw_perf_event_init(struct perf_event *event)
 
 static int armpmu_event_init(struct perf_event *event)
 {
+        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
         int err = 0;
+        atomic_t *active_events = &armpmu->active_events;
 
-        switch (event->attr.type) {
-        case PERF_TYPE_RAW:
-        case PERF_TYPE_HARDWARE:
-        case PERF_TYPE_HW_CACHE:
-                break;
-
-        default:
+        if (armpmu->map_event(event) == -ENOENT)
                 return -ENOENT;
-        }
-
-        if (!armpmu)
-                return -ENODEV;
 
         event->destroy = hw_perf_event_destroy;
 
-        if (!atomic_inc_not_zero(&active_events)) {
-                mutex_lock(&pmu_reserve_mutex);
-                if (atomic_read(&active_events) == 0) {
-                        err = armpmu_reserve_hardware();
-                }
+        if (!atomic_inc_not_zero(active_events)) {
+                mutex_lock(&armpmu->reserve_mutex);
+                if (atomic_read(active_events) == 0)
+                        err = armpmu_reserve_hardware(armpmu);
 
                 if (!err)
-                        atomic_inc(&active_events);
-                mutex_unlock(&pmu_reserve_mutex);
+                        atomic_inc(active_events);
+                mutex_unlock(&armpmu->reserve_mutex);
         }
 
         if (err)
@@ -582,22 +558,9 @@ static int armpmu_event_init(struct perf_event *event)
 
 static void armpmu_enable(struct pmu *pmu)
 {
-        /* Enable all of the perf events on hardware. */
-        int idx, enabled = 0;
-        struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
-        if (!armpmu)
-                return;
-
-        for (idx = 0; idx <= armpmu->num_events; ++idx) {
-                struct perf_event *event = cpuc->events[idx];
-
-                if (!event)
-                        continue;
-
-                armpmu->enable(&event->hw, idx);
-                enabled = 1;
-        }
+        struct arm_pmu *armpmu = to_arm_pmu(pmu);
+        struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+        int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
 
         if (enabled)
                 armpmu->start();
@@ -605,20 +568,32 @@ static void armpmu_enable(struct pmu *pmu)
 
 static void armpmu_disable(struct pmu *pmu)
 {
-        if (armpmu)
-                armpmu->stop();
+        struct arm_pmu *armpmu = to_arm_pmu(pmu);
+        armpmu->stop();
 }
 
-static struct pmu pmu = {
-        .pmu_enable     = armpmu_enable,
-        .pmu_disable    = armpmu_disable,
-        .event_init     = armpmu_event_init,
-        .add            = armpmu_add,
-        .del            = armpmu_del,
-        .start          = armpmu_start,
-        .stop           = armpmu_stop,
-        .read           = armpmu_read,
-};
+static void __init armpmu_init(struct arm_pmu *armpmu)
+{
+        atomic_set(&armpmu->active_events, 0);
+        mutex_init(&armpmu->reserve_mutex);
+
+        armpmu->pmu = (struct pmu) {
+                .pmu_enable     = armpmu_enable,
+                .pmu_disable    = armpmu_disable,
+                .event_init     = armpmu_event_init,
+                .add            = armpmu_add,
+                .del            = armpmu_del,
+                .start          = armpmu_start,
+                .stop           = armpmu_stop,
+                .read           = armpmu_read,
+        };
+}
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
+{
+        armpmu_init(armpmu);
+        return perf_pmu_register(&armpmu->pmu, name, type);
+}
 
 /* Include the PMU-specific implementations. */
 #include "perf_event_xscale.c"
@@ -630,14 +605,72 @@ static struct pmu pmu = {
  * This requires SMP to be available, so exists as a separate initcall.
  */
 static int __init
-armpmu_reset(void)
+cpu_pmu_reset(void)
+{
+        if (cpu_pmu && cpu_pmu->reset)
+                return on_each_cpu(cpu_pmu->reset, NULL, 1);
+        return 0;
+}
+arch_initcall(cpu_pmu_reset);
+
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static struct of_device_id armpmu_of_device_ids[] = {
+        {.compatible = "arm,cortex-a9-pmu"},
+        {.compatible = "arm,cortex-a8-pmu"},
+        {.compatible = "arm,arm1136-pmu"},
+        {.compatible = "arm,arm1176-pmu"},
+        {},
+};
+
+static struct platform_device_id armpmu_plat_device_ids[] = {
+        {.name = "arm-pmu"},
+        {},
+};
+
+static int __devinit armpmu_device_probe(struct platform_device *pdev)
 {
-        if (armpmu && armpmu->reset)
-                return on_each_cpu(armpmu->reset, NULL, 1);
+        cpu_pmu->plat_device = pdev;
         return 0;
 }
-arch_initcall(armpmu_reset);
 
+static struct platform_driver armpmu_driver = {
+        .driver         = {
+                .name   = "arm-pmu",
+                .of_match_table = armpmu_of_device_ids,
+        },
+        .probe          = armpmu_device_probe,
+        .id_table       = armpmu_plat_device_ids,
+};
+
+static int __init register_pmu_driver(void)
+{
+        return platform_driver_register(&armpmu_driver);
+}
+device_initcall(register_pmu_driver);
+
+static struct pmu_hw_events *armpmu_get_cpu_events(void)
+{
+        return &__get_cpu_var(cpu_hw_events);
+}
+
+static void __init cpu_pmu_init(struct arm_pmu *armpmu)
+{
+        int cpu;
+        for_each_possible_cpu(cpu) {
+                struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
+                events->events = per_cpu(hw_events, cpu);
+                events->used_mask = per_cpu(used_mask, cpu);
+                raw_spin_lock_init(&events->pmu_lock);
+        }
+        armpmu->get_hw_events = armpmu_get_cpu_events;
+        armpmu->type = ARM_PMU_DEVICE_CPU;
+}
+
+/*
+ * CPU PMU identification and registration.
+ */
 static int __init
 init_hw_perf_events(void)
 {
@@ -651,22 +684,22 @@ init_hw_perf_events(void)
                 case 0xB360:    /* ARM1136 */
                 case 0xB560:    /* ARM1156 */
                 case 0xB760:    /* ARM1176 */
-                        armpmu = armv6pmu_init();
+                        cpu_pmu = armv6pmu_init();
                         break;
                 case 0xB020:    /* ARM11mpcore */
-                        armpmu = armv6mpcore_pmu_init();
+                        cpu_pmu = armv6mpcore_pmu_init();
                         break;
                 case 0xC080:    /* Cortex-A8 */
-                        armpmu = armv7_a8_pmu_init();
+                        cpu_pmu = armv7_a8_pmu_init();
                         break;
                 case 0xC090:    /* Cortex-A9 */
-                        armpmu = armv7_a9_pmu_init();
+                        cpu_pmu = armv7_a9_pmu_init();
                         break;
                 case 0xC050:    /* Cortex-A5 */
-                        armpmu = armv7_a5_pmu_init();
+                        cpu_pmu = armv7_a5_pmu_init();
                         break;
                 case 0xC0F0:    /* Cortex-A15 */
-                        armpmu = armv7_a15_pmu_init();
+                        cpu_pmu = armv7_a15_pmu_init();
                         break;
                 }
         /* Intel CPUs [xscale]. */
@@ -674,23 +707,23 @@ init_hw_perf_events(void)
                 part_number = (cpuid >> 13) & 0x7;
                 switch (part_number) {
                 case 1:
-                        armpmu = xscale1pmu_init();
+                        cpu_pmu = xscale1pmu_init();
                         break;
                 case 2:
-                        armpmu = xscale2pmu_init();
+                        cpu_pmu = xscale2pmu_init();
                         break;
                 }
         }
 
-        if (armpmu) {
+        if (cpu_pmu) {
                 pr_info("enabled with %s PMU driver, %d counters available\n",
-                        armpmu->name, armpmu->num_events);
+                        cpu_pmu->name, cpu_pmu->num_events);
+                cpu_pmu_init(cpu_pmu);
+                armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
         } else {
                 pr_info("no hardware support available\n");
         }
 
-        perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
-
         return 0;
 }
 early_initcall(init_hw_perf_events);
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index dd7f3b9f4cb3..e63d8115c01b 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -54,7 +54,7 @@ enum armv6_perf_types {
 };
 
 enum armv6_counters {
-        ARMV6_CYCLE_COUNTER = 1,
+        ARMV6_CYCLE_COUNTER = 0,
         ARMV6_COUNTER0,
         ARMV6_COUNTER1,
 };
@@ -433,6 +433,7 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
                       int idx)
 {
         unsigned long val, mask, evt, flags;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
         if (ARMV6_CYCLE_COUNTER == idx) {
                 mask    = 0;
@@ -454,12 +455,29 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
          * Mask out the current event and set the counter to count the event
          * that we're interested in.
          */
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = armv6_pmcr_read();
         val &= ~mask;
         val |= evt;
         armv6_pmcr_write(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static int counter_is_active(unsigned long pmcr, int idx)
+{
+        unsigned long mask = 0;
+        if (idx == ARMV6_CYCLE_COUNTER)
+                mask = ARMV6_PMCR_CCOUNT_IEN;
+        else if (idx == ARMV6_COUNTER0)
+                mask = ARMV6_PMCR_COUNT0_IEN;
+        else if (idx == ARMV6_COUNTER1)
+                mask = ARMV6_PMCR_COUNT1_IEN;
+
+        if (mask)
+                return pmcr & mask;
+
+        WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+        return 0;
 }
 
 static irqreturn_t
@@ -468,7 +486,7 @@ armv6pmu_handle_irq(int irq_num,
 {
         unsigned long pmcr = armv6_pmcr_read();
         struct perf_sample_data data;
-        struct cpu_hw_events *cpuc;
+        struct pmu_hw_events *cpuc;
         struct pt_regs *regs;
         int idx;
 
@@ -487,11 +505,11 @@ armv6pmu_handle_irq(int irq_num,
         perf_sample_data_init(&data, 0);
 
         cpuc = &__get_cpu_var(cpu_hw_events);
-        for (idx = 0; idx <= armpmu->num_events; ++idx) {
+        for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
                 struct perf_event *event = cpuc->events[idx];
                 struct hw_perf_event *hwc;
 
-                if (!test_bit(idx, cpuc->active_mask))
+                if (!counter_is_active(pmcr, idx))
                         continue;
 
                 /*
@@ -508,7 +526,7 @@ armv6pmu_handle_irq(int irq_num,
                         continue;
 
                 if (perf_event_overflow(event, &data, regs))
-                        armpmu->disable(hwc, idx);
+                        cpu_pmu->disable(hwc, idx);
         }
 
         /*
@@ -527,28 +545,30 @@ static void
 armv6pmu_start(void)
 {
         unsigned long flags, val;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = armv6_pmcr_read();
         val |= ARMV6_PMCR_ENABLE;
         armv6_pmcr_write(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void
 armv6pmu_stop(void)
 {
         unsigned long flags, val;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = armv6_pmcr_read();
         val &= ~ARMV6_PMCR_ENABLE;
         armv6_pmcr_write(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int
-armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+armv6pmu_get_event_idx(struct pmu_hw_events *cpuc,
                        struct hw_perf_event *event)
 {
         /* Always place a cycle counter into the cycle counter. */
@@ -578,6 +598,7 @@ armv6pmu_disable_event(struct hw_perf_event *hwc,
                        int idx)
 {
         unsigned long val, mask, evt, flags;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
         if (ARMV6_CYCLE_COUNTER == idx) {
                 mask    = ARMV6_PMCR_CCOUNT_IEN;
@@ -598,12 +619,12 @@ armv6pmu_disable_event(struct hw_perf_event *hwc,
          * of ETM bus signal assertion cycles. The external reporting should
          * be disabled and so this should never increment.
          */
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = armv6_pmcr_read();
         val &= ~mask;
         val |= evt;
         armv6_pmcr_write(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void
@@ -611,6 +632,7 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
                               int idx)
 {
         unsigned long val, mask, flags, evt = 0;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
         if (ARMV6_CYCLE_COUNTER == idx) {
                 mask    = ARMV6_PMCR_CCOUNT_IEN;
@@ -627,15 +649,21 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
          * Unlike UP ARMv6, we don't have a way of stopping the counters. We
          * simply disable the interrupt reporting.
          */
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = armv6_pmcr_read();
         val &= ~mask;
         val |= evt;
         armv6_pmcr_write(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static int armv6_map_event(struct perf_event *event)
+{
+        return map_cpu_event(event, &armv6_perf_map,
+                                &armv6_perf_cache_map, 0xFF);
 }
 
-static const struct arm_pmu armv6pmu = {
+static struct arm_pmu armv6pmu = {
         .id                     = ARM_PERF_PMU_ID_V6,
         .name                   = "v6",
         .handle_irq             = armv6pmu_handle_irq,
@@ -646,14 +674,12 @@ static const struct arm_pmu armv6pmu = {
         .get_event_idx          = armv6pmu_get_event_idx,
         .start                  = armv6pmu_start,
         .stop                   = armv6pmu_stop,
-        .cache_map              = &armv6_perf_cache_map,
-        .event_map              = &armv6_perf_map,
-        .raw_event_mask         = 0xFF,
+        .map_event              = armv6_map_event,
         .num_events             = 3,
         .max_period             = (1LLU << 32) - 1,
 };
 
-static const struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__init armv6pmu_init(void)
 {
         return &armv6pmu;
 }
@@ -665,7 +691,14 @@ static const struct arm_pmu *__init armv6pmu_init(void)
  * disable the interrupt reporting and update the event. When unthrottling we
  * reset the period and enable the interrupt reporting.
  */
-static const struct arm_pmu armv6mpcore_pmu = {
+
+static int armv6mpcore_map_event(struct perf_event *event)
+{
+        return map_cpu_event(event, &armv6mpcore_perf_map,
+                                &armv6mpcore_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu armv6mpcore_pmu = {
         .id                     = ARM_PERF_PMU_ID_V6MP,
         .name                   = "v6mpcore",
         .handle_irq             = armv6pmu_handle_irq,
@@ -676,24 +709,22 @@ static const struct arm_pmu armv6mpcore_pmu = {
         .get_event_idx          = armv6pmu_get_event_idx,
         .start                  = armv6pmu_start,
         .stop                   = armv6pmu_stop,
-        .cache_map              = &armv6mpcore_perf_cache_map,
-        .event_map              = &armv6mpcore_perf_map,
-        .raw_event_mask         = 0xFF,
+        .map_event              = armv6mpcore_map_event,
         .num_events             = 3,
         .max_period             = (1LLU << 32) - 1,
 };
 
-static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__init armv6mpcore_pmu_init(void)
 {
         return &armv6mpcore_pmu;
 }
 #else
-static const struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__init armv6pmu_init(void)
 {
         return NULL;
 }
 
-static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__init armv6mpcore_pmu_init(void)
 {
         return NULL;
 }
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 6be3e2e4d838..1ef6d0034b85 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -17,6 +17,9 @@
  */
 
 #ifdef CONFIG_CPU_V7
+
+static struct arm_pmu armv7pmu;
+
 /*
  * Common ARMv7 event types
  *
@@ -676,23 +679,24 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 };
 
 /*
- * Perf Events counters
+ * Perf Events' indices
  */
-enum armv7_counters {
-        ARMV7_CYCLE_COUNTER             = 1,    /* Cycle counter */
-        ARMV7_COUNTER0                  = 2,    /* First event counter */
-};
+#define ARMV7_IDX_CYCLE_COUNTER 0
+#define ARMV7_IDX_COUNTER0      1
+#define ARMV7_IDX_COUNTER_LAST  (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
+
+#define ARMV7_MAX_COUNTERS      32
+#define ARMV7_COUNTER_MASK      (ARMV7_MAX_COUNTERS - 1)
 
 /*
- * The cycle counter is ARMV7_CYCLE_COUNTER.
- * The first event counter is ARMV7_COUNTER0.
- * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
+ * ARMv7 low level PMNC access
  */
-#define ARMV7_COUNTER_LAST      (ARMV7_COUNTER0 + armpmu->num_events - 1)
 
 /*
- * ARMv7 low level PMNC access
+ * Perf Event to low level counters mapping
  */
+#define ARMV7_IDX_TO_COUNTER(x) \
+        (((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK)
 
 /*
  * Per-CPU PMNC: config reg
@@ -708,103 +712,76 @@ enum armv7_counters {
 #define ARMV7_PMNC_MASK         0x3f     /* Mask for writable bits */
 
 /*
- * Available counters
- */
-#define ARMV7_CNT0              0       /* First event counter */
-#define ARMV7_CCNT              31      /* Cycle counter */
-
-/* Perf Event to low level counters mapping */
-#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
-
-/*
- * CNTENS: counters enable reg
- */
-#define ARMV7_CNTENS_P(idx)     (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENS_C          (1 << ARMV7_CCNT)
-
-/*
- * CNTENC: counters disable reg
- */
-#define ARMV7_CNTENC_P(idx)     (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENC_C          (1 << ARMV7_CCNT)
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define ARMV7_INTENS_P(idx)     (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENS_C          (1 << ARMV7_CCNT)
-
-/*
- * INTENC: counters overflow interrupt disable reg
- */
-#define ARMV7_INTENC_P(idx)     (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENC_C          (1 << ARMV7_CCNT)
-
-/*
- * EVTSEL: Event selection reg
+ * FLAG: counters overflow flag status reg
  */
-#define ARMV7_EVTSEL_MASK       0xff            /* Mask for writable bits */
+#define ARMV7_FLAG_MASK         0xffffffff      /* Mask for writable bits */
+#define ARMV7_OVERFLOWED_MASK   ARMV7_FLAG_MASK
 
 /*
- * SELECT: Counter selection reg
+ * PMXEVTYPER: Event selection reg
  */
-#define ARMV7_SELECT_MASK       0x1f            /* Mask for writable bits */
+#define ARMV7_EVTYPE_MASK       0xc00000ff      /* Mask for writable bits */
+#define ARMV7_EVTYPE_EVENT      0xff            /* Mask for EVENT bits */
 
 /*
- * FLAG: counters overflow flag status reg
+ * Event filters for PMUv2
  */
-#define ARMV7_FLAG_P(idx)       (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_FLAG_C            (1 << ARMV7_CCNT)
-#define ARMV7_FLAG_MASK         0xffffffff      /* Mask for writable bits */
-#define ARMV7_OVERFLOWED_MASK   ARMV7_FLAG_MASK
+#define ARMV7_EXCLUDE_PL1       (1 << 31)
+#define ARMV7_EXCLUDE_USER      (1 << 30)
+#define ARMV7_INCLUDE_HYP       (1 << 27)
 
-static inline unsigned long armv7_pmnc_read(void)
+static inline u32 armv7_pmnc_read(void)
 {
         u32 val;
         asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
         return val;
 }
 
-static inline void armv7_pmnc_write(unsigned long val)
+static inline void armv7_pmnc_write(u32 val)
 {
         val &= ARMV7_PMNC_MASK;
         isb();
         asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
 }
 
-static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+static inline int armv7_pmnc_has_overflowed(u32 pmnc)
 {
         return pmnc & ARMV7_OVERFLOWED_MASK;
 }
 
-static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
-                                        enum armv7_counters counter)
+static inline int armv7_pmnc_counter_valid(int idx)
+{
+        return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx)
 {
         int ret = 0;
+        u32 counter;
 
-        if (counter == ARMV7_CYCLE_COUNTER)
-                ret = pmnc & ARMV7_FLAG_C;
-        else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
-                ret = pmnc & ARMV7_FLAG_P(counter);
-        else
+        if (!armv7_pmnc_counter_valid(idx)) {
                 pr_err("CPU%u checking wrong counter %d overflow status\n",
-                        smp_processor_id(), counter);
+                        smp_processor_id(), idx);
+        } else {
+                counter = ARMV7_IDX_TO_COUNTER(idx);
+                ret = pmnc & BIT(counter);
+        }
 
         return ret;
 }
 
-static inline int armv7_pmnc_select_counter(unsigned int idx)
+static inline int armv7_pmnc_select_counter(int idx)
 {
-        u32 val;
+        u32 counter;
 
-        if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
-                pr_err("CPU%u selecting wrong PMNC counter"
-                        " %d\n", smp_processor_id(), idx);
-                return -1;
+        if (!armv7_pmnc_counter_valid(idx)) {
+                pr_err("CPU%u selecting wrong PMNC counter %d\n",
+                        smp_processor_id(), idx);
+                return -EINVAL;
         }
 
-        val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
-        asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+        counter = ARMV7_IDX_TO_COUNTER(idx);
+        asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter));
         isb();
 
         return idx;
@@ -812,124 +789,95 @@ static inline int armv7_pmnc_select_counter(unsigned int idx)
 
 static inline u32 armv7pmu_read_counter(int idx)
 {
-        unsigned long value = 0;
+        u32 value = 0;
 
-        if (idx == ARMV7_CYCLE_COUNTER)
-                asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
-        else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
-                if (armv7_pmnc_select_counter(idx) == idx)
-                        asm volatile("mrc p15, 0, %0, c9, c13, 2"
-                                     : "=r" (value));
-        } else
+        if (!armv7_pmnc_counter_valid(idx))
                 pr_err("CPU%u reading wrong counter %d\n",
                         smp_processor_id(), idx);
+        else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+                asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+        else if (armv7_pmnc_select_counter(idx) == idx)
+                asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value));
 
         return value;
 }
 
 static inline void armv7pmu_write_counter(int idx, u32 value)
 {
-        if (idx == ARMV7_CYCLE_COUNTER)
-                asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
-        else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
-                if (armv7_pmnc_select_counter(idx) == idx)
-                        asm volatile("mcr p15, 0, %0, c9, c13, 2"
-                                     : : "r" (value));
-        } else
+        if (!armv7_pmnc_counter_valid(idx))
                 pr_err("CPU%u writing wrong counter %d\n",
                         smp_processor_id(), idx);
+        else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+                asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+        else if (armv7_pmnc_select_counter(idx) == idx)
+                asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
 }
 
-static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+static inline void armv7_pmnc_write_evtsel(int idx, u32 val)
 {
         if (armv7_pmnc_select_counter(idx) == idx) {
-                val &= ARMV7_EVTSEL_MASK;
+                val &= ARMV7_EVTYPE_MASK;
                 asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
         }
 }
 
-static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+static inline int armv7_pmnc_enable_counter(int idx)
 {
-        u32 val;
+        u32 counter;
 
-        if ((idx != ARMV7_CYCLE_COUNTER) &&
-            ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-                pr_err("CPU%u enabling wrong PMNC counter"
-                        " %d\n", smp_processor_id(), idx);
-                return -1;
+        if (!armv7_pmnc_counter_valid(idx)) {
+                pr_err("CPU%u enabling wrong PMNC counter %d\n",
+                        smp_processor_id(), idx);
+                return -EINVAL;
         }
 
-        if (idx == ARMV7_CYCLE_COUNTER)
-                val = ARMV7_CNTENS_C;
-        else
-                val = ARMV7_CNTENS_P(idx);
-
-        asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
+        counter = ARMV7_IDX_TO_COUNTER(idx);
+        asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter)));
         return idx;
 }
 
-static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+static inline int armv7_pmnc_disable_counter(int idx)
 {
-        u32 val;
-
+        u32 counter;
 
-        if ((idx != ARMV7_CYCLE_COUNTER) &&
-            ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-                pr_err("CPU%u disabling wrong PMNC counter"
-                        " %d\n", smp_processor_id(), idx);
-                return -1;
+        if (!armv7_pmnc_counter_valid(idx)) {
+                pr_err("CPU%u disabling wrong PMNC counter %d\n",
+                        smp_processor_id(), idx);
+                return -EINVAL;
         }
 
-        if (idx == ARMV7_CYCLE_COUNTER)
-                val = ARMV7_CNTENC_C;
-        else
-                val = ARMV7_CNTENC_P(idx);
-
-        asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
+        counter = ARMV7_IDX_TO_COUNTER(idx);
+        asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter)));
         return idx;
 }
 
-static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+static inline int armv7_pmnc_enable_intens(int idx)
 {
-        u32 val;
+        u32 counter;
 
-        if ((idx != ARMV7_CYCLE_COUNTER) &&
-            ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-                pr_err("CPU%u enabling wrong PMNC counter"
-                        " interrupt enable %d\n", smp_processor_id(), idx);
-                return -1;
+        if (!armv7_pmnc_counter_valid(idx)) {
+                pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n",
+                        smp_processor_id(), idx);
+                return -EINVAL;
         }
 
-        if (idx == ARMV7_CYCLE_COUNTER)
-                val = ARMV7_INTENS_C;
-        else
-                val = ARMV7_INTENS_P(idx);
-
-        asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
+        counter = ARMV7_IDX_TO_COUNTER(idx);
+        asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter)));
         return idx;
 }
 
-static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+static inline int armv7_pmnc_disable_intens(int idx)
 {
-        u32 val;
+        u32 counter;
 
-        if ((idx != ARMV7_CYCLE_COUNTER) &&
-            ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-                pr_err("CPU%u disabling wrong PMNC counter"
-                        " interrupt enable %d\n", smp_processor_id(), idx);
-                return -1;
+        if (!armv7_pmnc_counter_valid(idx)) {
+                pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n",
+                        smp_processor_id(), idx);
+                return -EINVAL;
         }
 
-        if (idx == ARMV7_CYCLE_COUNTER)
-                val = ARMV7_INTENC_C;
-        else
-                val = ARMV7_INTENC_P(idx);
-
-        asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
-
+        counter = ARMV7_IDX_TO_COUNTER(idx);
+        asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
         return idx;
 }
 
@@ -973,14 +921,14 @@ static void armv7_pmnc_dump_regs(void)
         asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
         printk(KERN_INFO "CCNT  =0x%08x\n", val);
 
-        for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+        for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) {
                 armv7_pmnc_select_counter(cnt);
                 asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
                 printk(KERN_INFO "CNT[%d] count =0x%08x\n",
-                        cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+                        ARMV7_IDX_TO_COUNTER(cnt), val);
                 asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
                 printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
-                        cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+                        ARMV7_IDX_TO_COUNTER(cnt), val);
         }
 }
 #endif
@@ -988,12 +936,13 @@ static void armv7_pmnc_dump_regs(void)
 static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
 {
         unsigned long flags;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
         /*
          * Enable counter and interrupt, and set the counter to count
          * the event that we're interested in.
          */
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
         /*
          * Disable counter
@@ -1002,9 +951,10 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
 
         /*
          * Set event (if destined for PMNx counters)
-         * We don't need to set the event if it's a cycle count
+         * We only need to set the event for the cycle counter if we
+         * have the ability to perform event filtering.
          */
-        if (idx != ARMV7_CYCLE_COUNTER)
+        if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER)
                 armv7_pmnc_write_evtsel(idx, hwc->config_base);
 
         /*
@@ -1017,17 +967,18 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
          */
         armv7_pmnc_enable_counter(idx);
 
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
         unsigned long flags;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
         /*
          * Disable counter and interrupt
          */
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
         /*
          * Disable counter
@@ -1039,14 +990,14 @@ static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
          */
         armv7_pmnc_disable_intens(idx);
 
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 {
-        unsigned long pmnc;
+        u32 pmnc;
         struct perf_sample_data data;
-        struct cpu_hw_events *cpuc;
+        struct pmu_hw_events *cpuc;
         struct pt_regs *regs;
         int idx;
 
@@ -1069,13 +1020,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
         perf_sample_data_init(&data, 0);
 
         cpuc = &__get_cpu_var(cpu_hw_events);
-        for (idx = 0; idx <= armpmu->num_events; ++idx) {
+        for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
                 struct perf_event *event = cpuc->events[idx];
                 struct hw_perf_event *hwc;
 
-                if (!test_bit(idx, cpuc->active_mask))
-                        continue;
-
                 /*
                  * We have a single interrupt for all counters. Check that
                  * each counter has overflowed before we process it.
@@ -1090,7 +1038,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
                         continue;
 
                 if (perf_event_overflow(event, &data, regs))
-                        armpmu->disable(hwc, idx);
+                        cpu_pmu->disable(hwc, idx);
         }
 
         /*
@@ -1108,61 +1056,114 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 static void armv7pmu_start(void)
 {
         unsigned long flags;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         /* Enable all counters */
         armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void armv7pmu_stop(void)
 {
         unsigned long flags;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         /* Disable all counters */
         armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc,
                                   struct hw_perf_event *event)
 {
         int idx;
+        unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT;
 
         /* Always place a cycle counter into the cycle counter. */
-        if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
-                if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+        if (evtype == ARMV7_PERFCTR_CPU_CYCLES) {
+                if (test_and_set_bit(ARMV7_IDX_CYCLE_COUNTER, cpuc->used_mask))
                         return -EAGAIN;
 
-                return ARMV7_CYCLE_COUNTER;
-        } else {
-                /*
-                 * For anything other than a cycle counter, try and use
-                 * the events counters
-                 */
-                for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
-                        if (!test_and_set_bit(idx, cpuc->used_mask))
-                                return idx;
-                }
+                return ARMV7_IDX_CYCLE_COUNTER;
+        }
 
-                /* The counters are all in use. */
-                return -EAGAIN;
+        /*
+         * For anything other than a cycle counter, try and use
+         * the events counters
+         */
+        for (idx = ARMV7_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) {
+                if (!test_and_set_bit(idx, cpuc->used_mask))
+                        return idx;
         }
+
+        /* The counters are all in use. */
+        return -EAGAIN;
+}
+
+/*
+ * Add an event filter to a given event. This will only work for PMUv2 PMUs.
+ */
+static int armv7pmu_set_event_filter(struct hw_perf_event *event,
+                                     struct perf_event_attr *attr)
+{
+        unsigned long config_base = 0;
+
+        if (attr->exclude_idle)
+                return -EPERM;
+        if (attr->exclude_user)
+                config_base |= ARMV7_EXCLUDE_USER;
+        if (attr->exclude_kernel)
+                config_base |= ARMV7_EXCLUDE_PL1;
+        if (!attr->exclude_hv)
+                config_base |= ARMV7_INCLUDE_HYP;
+
+        /*
+         * Install the filter into config_base as this is used to
+         * construct the event type.
+         */
+        event->config_base = config_base;
+
+        return 0;
 }
 
 static void armv7pmu_reset(void *info)
 {
-        u32 idx, nb_cnt = armpmu->num_events;
+        u32 idx, nb_cnt = cpu_pmu->num_events;
 
         /* The counter and interrupt enable registers are unknown at reset. */
-        for (idx = 1; idx < nb_cnt; ++idx)
+        for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx)
                 armv7pmu_disable_event(NULL, idx);
 
         /* Initialize & Reset PMNC: C and P bits */
         armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
 }
 
+static int armv7_a8_map_event(struct perf_event *event)
+{
+        return map_cpu_event(event, &armv7_a8_perf_map,
+                                &armv7_a8_perf_cache_map, 0xFF);
+}
+
+static int armv7_a9_map_event(struct perf_event *event)
+{
+        return map_cpu_event(event, &armv7_a9_perf_map,
+                                &armv7_a9_perf_cache_map, 0xFF);
+}
+
+static int armv7_a5_map_event(struct perf_event *event)
+{
+        return map_cpu_event(event, &armv7_a5_perf_map,
+                                &armv7_a5_perf_cache_map, 0xFF);
+}
+
+static int armv7_a15_map_event(struct perf_event *event)
+{
+        return map_cpu_event(event, &armv7_a15_perf_map,
+                                &armv7_a15_perf_cache_map, 0xFF);
+}
+
 static struct arm_pmu armv7pmu = {
         .handle_irq             = armv7pmu_handle_irq,
         .enable                 = armv7pmu_enable_event,
@@ -1173,7 +1174,6 @@ static struct arm_pmu armv7pmu = {
         .start                  = armv7pmu_start,
         .stop                   = armv7pmu_stop,
         .reset                  = armv7pmu_reset,
-        .raw_event_mask         = 0xFF,
         .max_period             = (1LLU << 32) - 1,
 };
 
@@ -1188,62 +1188,59 @@ static u32 __init armv7_read_num_pmnc_events(void)
         return nb_cnt + 1;
 }
 
-static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__init armv7_a8_pmu_init(void)
 {
         armv7pmu.id             = ARM_PERF_PMU_ID_CA8;
         armv7pmu.name           = "ARMv7 Cortex-A8";
-        armv7pmu.cache_map      = &armv7_a8_perf_cache_map;
-        armv7pmu.event_map      = &armv7_a8_perf_map;
+        armv7pmu.map_event      = armv7_a8_map_event;
         armv7pmu.num_events     = armv7_read_num_pmnc_events();
         return &armv7pmu;
 }
 
-static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__init armv7_a9_pmu_init(void)
 {
         armv7pmu.id             = ARM_PERF_PMU_ID_CA9;
         armv7pmu.name           = "ARMv7 Cortex-A9";
-        armv7pmu.cache_map      = &armv7_a9_perf_cache_map;
-        armv7pmu.event_map      = &armv7_a9_perf_map;
+        armv7pmu.map_event      = armv7_a9_map_event;
         armv7pmu.num_events     = armv7_read_num_pmnc_events();
         return &armv7pmu;
 }
 
-static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__init armv7_a5_pmu_init(void)
 {
         armv7pmu.id             = ARM_PERF_PMU_ID_CA5;
         armv7pmu.name           = "ARMv7 Cortex-A5";
-        armv7pmu.cache_map      = &armv7_a5_perf_cache_map;
-        armv7pmu.event_map      = &armv7_a5_perf_map;
+        armv7pmu.map_event      = armv7_a5_map_event;
         armv7pmu.num_events     = armv7_read_num_pmnc_events();
         return &armv7pmu;
 }
 
-static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__init armv7_a15_pmu_init(void)
 {
         armv7pmu.id             = ARM_PERF_PMU_ID_CA15;
         armv7pmu.name           = "ARMv7 Cortex-A15";
-        armv7pmu.cache_map      = &armv7_a15_perf_cache_map;
-        armv7pmu.event_map      = &armv7_a15_perf_map;
+        armv7pmu.map_event      = armv7_a15_map_event;
         armv7pmu.num_events     = armv7_read_num_pmnc_events();
+        armv7pmu.set_event_filter = armv7pmu_set_event_filter;
         return &armv7pmu;
 }
 #else
-static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__init armv7_a8_pmu_init(void)
 {
         return NULL;
 }
 
-static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__init armv7_a9_pmu_init(void)
 {
         return NULL;
 }
 
-static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__init armv7_a5_pmu_init(void)
 {
         return NULL;
 }
 
-static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__init armv7_a15_pmu_init(void)
 {
         return NULL;
 }
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 3c4397491d08..e0cca10a8411 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -40,7 +40,7 @@ enum xscale_perf_types {
 };
 
 enum xscale_counters {
-        XSCALE_CYCLE_COUNTER    = 1,
+        XSCALE_CYCLE_COUNTER    = 0,
         XSCALE_COUNTER0,
         XSCALE_COUNTER1,
         XSCALE_COUNTER2,
@@ -222,7 +222,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 {
         unsigned long pmnc;
         struct perf_sample_data data;
-        struct cpu_hw_events *cpuc;
+        struct pmu_hw_events *cpuc;
         struct pt_regs *regs;
         int idx;
 
@@ -249,13 +249,10 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
         perf_sample_data_init(&data, 0);
 
         cpuc = &__get_cpu_var(cpu_hw_events);
-        for (idx = 0; idx <= armpmu->num_events; ++idx) {
+        for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
                 struct perf_event *event = cpuc->events[idx];
                 struct hw_perf_event *hwc;
 
-                if (!test_bit(idx, cpuc->active_mask))
-                        continue;
-
                 if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
                         continue;
 
@@ -266,7 +263,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
                         continue;
 
                 if (perf_event_overflow(event, &data, regs))
-                        armpmu->disable(hwc, idx);
+                        cpu_pmu->disable(hwc, idx);
         }
 
         irq_work_run();
@@ -284,6 +281,7 @@ static void
 xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
 {
         unsigned long val, mask, evt, flags;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
         switch (idx) {
         case XSCALE_CYCLE_COUNTER:
@@ -305,18 +303,19 @@ xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
                 return;
         }
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = xscale1pmu_read_pmnc();
         val &= ~mask;
         val |= evt;
         xscale1pmu_write_pmnc(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void
 xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
         unsigned long val, mask, evt, flags;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
         switch (idx) {
         case XSCALE_CYCLE_COUNTER:
@@ -336,16 +335,16 @@ xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
                 return;
         }
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = xscale1pmu_read_pmnc();
         val &= ~mask;
         val |= evt;
         xscale1pmu_write_pmnc(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int
-xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
+xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc,
                         struct hw_perf_event *event)
 {
         if (XSCALE_PERFCTR_CCNT == event->config_base) {
@@ -368,24 +367,26 @@ static void
 xscale1pmu_start(void)
 {
         unsigned long flags, val;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = xscale1pmu_read_pmnc();
         val |= XSCALE_PMU_ENABLE;
         xscale1pmu_write_pmnc(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void
 xscale1pmu_stop(void)
 {
         unsigned long flags, val;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = xscale1pmu_read_pmnc();
         val &= ~XSCALE_PMU_ENABLE;
         xscale1pmu_write_pmnc(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static inline u32
@@ -424,7 +425,13 @@ xscale1pmu_write_counter(int counter, u32 val)
         }
 }
 
-static const struct arm_pmu xscale1pmu = {
+static int xscale_map_event(struct perf_event *event)
+{
+        return map_cpu_event(event, &xscale_perf_map,
+                                &xscale_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu xscale1pmu = {
         .id             = ARM_PERF_PMU_ID_XSCALE1,
         .name           = "xscale1",
         .handle_irq     = xscale1pmu_handle_irq,
@@ -435,14 +442,12 @@ static const struct arm_pmu xscale1pmu = {
         .get_event_idx  = xscale1pmu_get_event_idx,
         .start          = xscale1pmu_start,
         .stop           = xscale1pmu_stop,
-        .cache_map      = &xscale_perf_cache_map,
-        .event_map      = &xscale_perf_map,
-        .raw_event_mask = 0xFF,
+        .map_event      = xscale_map_event,
         .num_events     = 3,
         .max_period     = (1LLU << 32) - 1,
 };
 
-static const struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__init xscale1pmu_init(void)
 {
         return &xscale1pmu;
 }
@@ -560,7 +565,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 {
         unsigned long pmnc, of_flags;
         struct perf_sample_data data;
-        struct cpu_hw_events *cpuc;
+        struct pmu_hw_events *cpuc;
         struct pt_regs *regs;
         int idx;
 
@@ -581,13 +586,10 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
         perf_sample_data_init(&data, 0);
 
         cpuc = &__get_cpu_var(cpu_hw_events);
-        for (idx = 0; idx <= armpmu->num_events; ++idx) {
+        for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
                 struct perf_event *event = cpuc->events[idx];
                 struct hw_perf_event *hwc;
 
-                if (!test_bit(idx, cpuc->active_mask))
-                        continue;
-
                 if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
                         continue;
 
@@ -598,7 +600,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
                         continue;
 
                 if (perf_event_overflow(event, &data, regs))
-                        armpmu->disable(hwc, idx);
+                        cpu_pmu->disable(hwc, idx);
         }
 
         irq_work_run();
@@ -616,6 +618,7 @@ static void
 xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
 {
         unsigned long flags, ien, evtsel;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
         ien = xscale2pmu_read_int_enable();
         evtsel = xscale2pmu_read_event_select();
@@ -649,16 +652,17 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
                 return;
         }
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         xscale2pmu_write_event_select(evtsel);
         xscale2pmu_write_int_enable(ien);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
         unsigned long flags, ien, evtsel;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
         ien = xscale2pmu_read_int_enable();
         evtsel = xscale2pmu_read_event_select();
@@ -692,14 +696,14 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
                 return;
         }
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         xscale2pmu_write_event_select(evtsel);
         xscale2pmu_write_int_enable(ien);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int
-xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
+xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc,
                         struct hw_perf_event *event)
 {
         int idx = xscale1pmu_get_event_idx(cpuc, event);
@@ -718,24 +722,26 @@ static void
 xscale2pmu_start(void)
 {
         unsigned long flags, val;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
         val |= XSCALE_PMU_ENABLE;
         xscale2pmu_write_pmnc(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void
 xscale2pmu_stop(void)
 {
         unsigned long flags, val;
+        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
-        raw_spin_lock_irqsave(&pmu_lock, flags);
+        raw_spin_lock_irqsave(&events->pmu_lock, flags);
         val = xscale2pmu_read_pmnc();
         val &= ~XSCALE_PMU_ENABLE;
         xscale2pmu_write_pmnc(val);
-        raw_spin_unlock_irqrestore(&pmu_lock, flags);
+        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static inline u32
@@ -786,7 +792,7 @@ xscale2pmu_write_counter(int counter, u32 val)
         }
 }
 
-static const struct arm_pmu xscale2pmu = {
+static struct arm_pmu xscale2pmu = {
         .id             = ARM_PERF_PMU_ID_XSCALE2,
         .name           = "xscale2",
         .handle_irq     = xscale2pmu_handle_irq,
@@ -797,24 +803,22 @@ static const struct arm_pmu xscale2pmu = {
         .get_event_idx  = xscale2pmu_get_event_idx,
         .start          = xscale2pmu_start,
         .stop           = xscale2pmu_stop,
-        .cache_map      = &xscale_perf_cache_map,
-        .event_map      = &xscale_perf_map,
-        .raw_event_mask = 0xFF,
+        .map_event      = xscale_map_event,
         .num_events     = 5,
         .max_period     = (1LLU << 32) - 1,
 };
 
-static const struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__init xscale2pmu_init(void)
 {
         return &xscale2pmu;
 }
 #else
-static const struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__init xscale1pmu_init(void)
 {
         return NULL;
 }
 
-static const struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__init xscale2pmu_init(void)
 {
         return NULL;
 }
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index c53474fe84df..2c3407ee8576 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -10,192 +10,26 @@
  *
  */
 
-#define pr_fmt(fmt) "PMU: " fmt
-
-#include <linux/cpumask.h>
 #include <linux/err.h>
-#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
 
 #include <asm/pmu.h>
 
-static volatile long pmu_lock;
-
-static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES];
-
-static int __devinit pmu_register(struct platform_device *pdev,
-                                        enum arm_pmu_type type)
-{
-        if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
-                pr_warning("received registration request for unknown "
-                                "PMU device type %d\n", type);
-                return -EINVAL;
-        }
-
-        if (pmu_devices[type]) {
-                pr_warning("rejecting duplicate registration of PMU device "
-                        "type %d.", type);
-                return -ENOSPC;
-        }
-
-        pr_info("registered new PMU device of type %d\n", type);
-        pmu_devices[type] = pdev;
-        return 0;
-}
-
-#define OF_MATCH_PMU(_name, _type) {    \
-        .compatible = _name,            \
-        .data = (void *)_type,          \
-}
-
-#define OF_MATCH_CPU(name)      OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU)
-
-static struct of_device_id armpmu_of_device_ids[] = {
-        OF_MATCH_CPU("arm,cortex-a9-pmu"),
-        OF_MATCH_CPU("arm,cortex-a8-pmu"),
-        OF_MATCH_CPU("arm,arm1136-pmu"),
-        OF_MATCH_CPU("arm,arm1176-pmu"),
-        {},
-};
-
-#define PLAT_MATCH_PMU(_name, _type) {  \
-        .name           = _name,        \
-        .driver_data    = _type,        \
-}
-
-#define PLAT_MATCH_CPU(_name)   PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU)
-
-static struct platform_device_id armpmu_plat_device_ids[] = {
-        PLAT_MATCH_CPU("arm-pmu"),
-        {},
-};
-
-enum arm_pmu_type armpmu_device_type(struct platform_device *pdev)
-{
-        const struct of_device_id       *of_id;
-        const struct platform_device_id *pdev_id;
-
-        /* provided by of_device_id table */
-        if (pdev->dev.of_node) {
-                of_id = of_match_device(armpmu_of_device_ids, &pdev->dev);
-                BUG_ON(!of_id);
-                return (enum arm_pmu_type)of_id->data;
-        }
-
-        /* Provided by platform_device_id table */
-        pdev_id = platform_get_device_id(pdev);
-        BUG_ON(!pdev_id);
-        return pdev_id->driver_data;
-}
-
-static int __devinit armpmu_device_probe(struct platform_device *pdev)
-{
-        return pmu_register(pdev, armpmu_device_type(pdev));
-}
-
-static struct platform_driver armpmu_driver = {
-        .driver         = {
-                .name   = "arm-pmu",
-                .of_match_table = armpmu_of_device_ids,
-        },
-        .probe          = armpmu_device_probe,
-        .id_table       = armpmu_plat_device_ids,
-};
-
-static int __init register_pmu_driver(void)
-{
-        return platform_driver_register(&armpmu_driver);
-}
-device_initcall(register_pmu_driver);
+/*
+ * PMU locking to ensure mutual exclusion between different subsystems.
+ */
+static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)];
 
-struct platform_device *
+int
 reserve_pmu(enum arm_pmu_type type)
 {
-        struct platform_device *pdev;
-
-        if (test_and_set_bit_lock(type, &pmu_lock)) {
-                pdev = ERR_PTR(-EBUSY);
-        } else if (pmu_devices[type] == NULL) {
-                clear_bit_unlock(type, &pmu_lock);
-                pdev = ERR_PTR(-ENODEV);
-        } else {
-                pdev = pmu_devices[type];
-        }
-
-        return pdev;
+        return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0;
 }
 EXPORT_SYMBOL_GPL(reserve_pmu);
 
-int
+void
 release_pmu(enum arm_pmu_type type)
 {
-        if (WARN_ON(!pmu_devices[type]))
-                return -EINVAL;
-        clear_bit_unlock(type, &pmu_lock);
-        return 0;
-}
-EXPORT_SYMBOL_GPL(release_pmu);
-
-static int
-set_irq_affinity(int irq,
-                 unsigned int cpu)
-{
-#ifdef CONFIG_SMP
-        int err = irq_set_affinity(irq, cpumask_of(cpu));
-        if (err)
-                pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
-                           irq, cpu);
-        return err;
-#else
-        return -EINVAL;
-#endif
-}
-
-static int
-init_cpu_pmu(void)
-{
-        int i, irqs, err = 0;
-        struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU];
-
-        if (!pdev)
-                return -ENODEV;
-
-        irqs = pdev->num_resources;
-
-        /*
-         * If we have a single PMU interrupt that we can't shift, assume that
-         * we're running on a uniprocessor machine and continue.
-         */
-        if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0)))
-                return 0;
-
-        for (i = 0; i < irqs; ++i) {
-                err = set_irq_affinity(platform_get_irq(pdev, i), i);
-                if (err)
-                        break;
-        }
-
-        return err;
-}
-
-int
-init_pmu(enum arm_pmu_type type)
-{
-        int err = 0;
-
-        switch (type) {
-        case ARM_PMU_DEVICE_CPU:
-                err = init_cpu_pmu();
-                break;
-        default:
-                pr_warning("attempt to initialise PMU of unknown "
-                           "type %d\n", type);
-                err = -EINVAL;
-        }
-
-        return err;
+        clear_bit_unlock(type, pmu_lock);
 }
-EXPORT_SYMBOL_GPL(init_pmu);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 3fe93f75b55a..bda0a218f4a5 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -849,25 +849,8 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
 
         if (__atags_pointer)
                 tags = phys_to_virt(__atags_pointer);
-        else if (mdesc->boot_params) {
-#ifdef CONFIG_MMU
-                /*
-                 * We still are executing with a minimal MMU mapping created
-                 * with the presumption that the machine default for this
-                 * is located in the first MB of RAM.  Anything else will
-                 * fault and silently hang the kernel at this point.
-                 */
-                if (mdesc->boot_params < PHYS_OFFSET ||
-                    mdesc->boot_params >= PHYS_OFFSET + SZ_1M) {
-                        printk(KERN_WARNING
-                               "Default boot params at physical 0x%08lx out of reach\n",
-                               mdesc->boot_params);
-                } else
-#endif
-                {
-                        tags = phys_to_virt(mdesc->boot_params);
-                }
-        }
+        else if (mdesc->atag_offset)
+                tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
 
 #if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
         /*
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index dc902f2c6845..020e99c845e7 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -8,92 +8,61 @@
         .text
 
 /*
- * Save CPU state for a suspend
- *  r1 = v:p offset
- *  r2 = suspend function arg0
- *  r3 = suspend function
+ * Save CPU state for a suspend.  This saves the CPU general purpose
+ * registers, and allocates space on the kernel stack to save the CPU
+ * specific registers and some other data for resume.
+ *  r0 = suspend function arg0
+ *  r1 = suspend function
  */
 ENTRY(__cpu_suspend)
         stmfd   sp!, {r4 - r11, lr}
 #ifdef MULTI_CPU
         ldr     r10, =processor
-        ldr     r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
-        ldr     ip, [r10, #CPU_DO_RESUME] @ virtual resume function
+        ldr     r4, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
 #else
-        ldr     r5, =cpu_suspend_size
-        ldr     ip, =cpu_do_resume
+        ldr     r4, =cpu_suspend_size
 #endif
-        mov     r6, sp                  @ current virtual SP
-        sub     sp, sp, r5              @ allocate CPU state on stack
-        mov     r0, sp                  @ save pointer to CPU save block
-        add     ip, ip, r1              @ convert resume fn to phys
-        stmfd   sp!, {r1, r6, ip}       @ save v:p, virt SP, phys resume fn
-        ldr     r5, =sleep_save_sp
-        add     r6, sp, r1              @ convert SP to phys
-        stmfd   sp!, {r2, r3}           @ save suspend func arg and pointer
+        mov     r5, sp                  @ current virtual SP
+        add     r4, r4, #12             @ Space for pgd, virt sp, phys resume fn
+        sub     sp, sp, r4              @ allocate CPU state on stack
+        stmfd   sp!, {r0, r1}           @ save suspend func arg and pointer
+        add     r0, sp, #8              @ save pointer to save block
+        mov     r1, r4                  @ size of save block
+        mov     r2, r5                  @ virtual SP
+        ldr     r3, =sleep_save_sp
 #ifdef CONFIG_SMP
         ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
         ALT_UP(mov lr, #0)
         and     lr, lr, #15
-        str     r6, [r5, lr, lsl #2]    @ save phys SP
-#else
-        str     r6, [r5]                @ save phys SP
-#endif
-#ifdef MULTI_CPU
-        mov     lr, pc
-        ldr     pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
-#else
-        bl      cpu_do_suspend
-#endif
-
-        @ flush data cache
-#ifdef MULTI_CACHE
-        ldr     r10, =cpu_cache
-        mov     lr, pc
-        ldr     pc, [r10, #CACHE_FLUSH_KERN_ALL]
-#else
-        bl      __cpuc_flush_kern_all
+        add     r3, r3, lr, lsl #2
 #endif
+        bl      __cpu_suspend_save
         adr     lr, BSYM(cpu_suspend_abort)
         ldmfd   sp!, {r0, pc}           @ call suspend fn
 ENDPROC(__cpu_suspend)
         .ltorg
 
 cpu_suspend_abort:
-        ldmia   sp!, {r1 - r3}          @ pop v:p, virt SP, phys resume fn
+        ldmia   sp!, {r1 - r3}          @ pop phys pgd, virt SP, phys resume fn
+        teq     r0, #0
+        moveq   r0, #1                  @ force non-zero value
         mov     sp, r2
         ldmfd   sp!, {r4 - r11, pc}
 ENDPROC(cpu_suspend_abort)
 
 /*
  * r0 = control register value
- * r1 = v:p offset (preserved by cpu_do_resume)
- * r2 = phys page table base
- * r3 = L1 section flags
  */
+        .align  5
 ENTRY(cpu_resume_mmu)
-        adr     r4, cpu_resume_turn_mmu_on
-        mov     r4, r4, lsr #20
-        orr     r3, r3, r4, lsl #20
-        ldr     r5, [r2, r4, lsl #2]    @ save old mapping
-        str     r3, [r2, r4, lsl #2]    @ setup 1:1 mapping for mmu code
-        sub     r2, r2, r1
         ldr     r3, =cpu_resume_after_mmu
-        bic     r1, r0, #CR_C           @ ensure D-cache is disabled
-        b       cpu_resume_turn_mmu_on
-ENDPROC(cpu_resume_mmu)
-        .ltorg
-        .align  5
-cpu_resume_turn_mmu_on:
-        mcr     p15, 0, r1, c1, c0, 0   @ turn on MMU, I-cache, etc
-        mrc     p15, 0, r1, c0, c0, 0   @ read id reg
-        mov     r1, r1
-        mov     r1, r1
+        mcr     p15, 0, r0, c1, c0, 0   @ turn on MMU, I-cache, etc
+        mrc     p15, 0, r0, c0, c0, 0   @ read id reg
+        mov     r0, r0
+        mov     r0, r0
         mov     pc, r3                  @ jump to virtual address
-ENDPROC(cpu_resume_turn_mmu_on)
+ENDPROC(cpu_resume_mmu)
 cpu_resume_after_mmu:
-        str     r5, [r2, r4, lsl #2]    @ restore old mapping
-        mcr     p15, 0, r0, c1, c0, 0   @ turn on D-cache
         bl      cpu_init                @ restore the und/abt/irq banked regs
         mov     r0, #0                  @ return zero on success
         ldmfd   sp!, {r4 - r11, pc}
@@ -119,7 +88,7 @@ ENTRY(cpu_resume)
         ldr     r0, sleep_save_sp       @ stack phys addr
 #endif
         setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1  @ set SVC, irqs off
-        @ load v:p, stack, resume fn
+        @ load phys pgd, stack, resume fn
   ARM(  ldmia   r0!, {r1, sp, pc}       )
 THUMB(  ldmia   r0!, {r1, r2, r3}       )
 THUMB(  mov     sp, r2                  )
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 94f34a6c8610..ef5640b9e218 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -460,10 +460,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu)
         for (i = 0; i < NR_IPI; i++)
                 sum += __get_irq_stat(cpu, ipi_irqs[i]);
 
-#ifdef CONFIG_LOCAL_TIMERS
-        sum += __get_irq_stat(cpu, local_timer_irqs);
-#endif
-
         return sum;
 }
 
@@ -480,38 +476,6 @@ static void ipi_timer(void)
         irq_exit();
 }
 
-#ifdef CONFIG_LOCAL_TIMERS
-asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs)
-{
-        handle_local_timer(regs);
-}
-
-void handle_local_timer(struct pt_regs *regs)
-{
-        struct pt_regs *old_regs = set_irq_regs(regs);
-        int cpu = smp_processor_id();
-
-        if (local_timer_ack()) {
-                __inc_irq_stat(cpu, local_timer_irqs);
-                ipi_timer();
-        }
-
-        set_irq_regs(old_regs);
-}
-
-void show_local_irqs(struct seq_file *p, int prec)
-{
-        unsigned int cpu;
-
-        seq_printf(p, "%*s: ", prec, "LOC");
-
-        for_each_present_cpu(cpu)
-                seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs));
-
-        seq_printf(p, " Local timer interrupts\n");
-}
-#endif
-
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 static void smp_timer_broadcast(const struct cpumask *mask)
 {
@@ -562,7 +526,7 @@ static void percpu_timer_stop(void)
         unsigned int cpu = smp_processor_id();
         struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
 
-        evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+        local_timer_stop(evt);
 }
 #endif
 
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 01c186222f3b..a8a6682d6b52 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 
 #include <asm/smp_twd.h>
+#include <asm/localtimer.h>
 #include <asm/hardware/gic.h>
 
 /* set up by the platform code */
@@ -26,6 +27,8 @@ void __iomem *twd_base;
 
 static unsigned long twd_timer_rate;
 
+static struct clock_event_device __percpu **twd_evt;
+
 static void twd_set_mode(enum clock_event_mode mode,
                         struct clock_event_device *clk)
 {
@@ -80,6 +83,12 @@ int twd_timer_ack(void)
         return 0;
 }
 
+void twd_timer_stop(struct clock_event_device *clk)
+{
+        twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+        disable_percpu_irq(clk->irq);
+}
+
 static void __cpuinit twd_calibrate_rate(void)
 {
         unsigned long count;
@@ -119,11 +128,43 @@ static void __cpuinit twd_calibrate_rate(void)
         }
 }
 
+static irqreturn_t twd_handler(int irq, void *dev_id)
+{
+        struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+
+        if (twd_timer_ack()) {
+                evt->event_handler(evt);
+                return IRQ_HANDLED;
+        }
+
+        return IRQ_NONE;
+}
+
 /*
  * Setup the local clock events for a CPU.
  */
 void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 {
+        struct clock_event_device **this_cpu_clk;
+
+        if (!twd_evt) {
+                int err;
+
+                twd_evt = alloc_percpu(struct clock_event_device *);
+                if (!twd_evt) {
+                        pr_err("twd: can't allocate memory\n");
+                        return;
+                }
+
+                err = request_percpu_irq(clk->irq, twd_handler,
+                                         "twd", twd_evt);
+                if (err) {
+                        pr_err("twd: can't register interrupt %d (%d)\n",
+                               clk->irq, err);
+                        return;
+                }
+        }
+
         twd_calibrate_rate();
 
         clk->name = "local_timer";
@@ -137,8 +178,10 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
         clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
         clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
 
+        this_cpu_clk = __this_cpu_ptr(twd_evt);
+        *this_cpu_clk = clk;
+
         clockevents_register_device(clk);
 
-        /* Make sure our local interrupt controller has this enabled */
-        gic_enable_ppi(clk->irq);
+        enable_percpu_irq(clk->irq, 0);
 }
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
new file mode 100644
index 000000000000..93a22d282c16
--- /dev/null
+++ b/arch/arm/kernel/suspend.c
@@ -0,0 +1,72 @@
+#include <linux/init.h>
+
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/memory.h>
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
+
+static pgd_t *suspend_pgd;
+
+extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
+extern void cpu_resume_mmu(void);
+
+/*
+ * This is called by __cpu_suspend() to save the state, and do whatever
+ * flushing is required to ensure that when the CPU goes to sleep we have
+ * the necessary data available when the caches are not searched.
+ */
+void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
+{
+        *save_ptr = virt_to_phys(ptr);
+
+        /* This must correspond to the LDM in cpu_resume() assembly */
+        *ptr++ = virt_to_phys(suspend_pgd);
+        *ptr++ = sp;
+        *ptr++ = virt_to_phys(cpu_do_resume);
+
+        cpu_do_suspend(ptr);
+
+        flush_cache_all();
+        outer_clean_range(*save_ptr, *save_ptr + ptrsz);
+        outer_clean_range(virt_to_phys(save_ptr),
+                          virt_to_phys(save_ptr) + sizeof(*save_ptr));
+}
+
+/*
+ * Hide the first two arguments to __cpu_suspend - these are an implementation
+ * detail which platform code shouldn't have to know about.
+ */
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+        struct mm_struct *mm = current->active_mm;
+        int ret;
+
+        if (!suspend_pgd)
+                return -EINVAL;
+
+        /*
+         * Provide a temporary page table with an identity mapping for
+         * the MMU-enable code, required for resuming.  On successful
+         * resume (indicated by a zero return code), we need to switch
+         * back to the correct page tables.
+         */
+        ret = __cpu_suspend(arg, fn);
+        if (ret == 0) {
+                cpu_switch_mm(mm->pgd, mm);
+                local_flush_tlb_all();
+        }
+
+        return ret;
+}
+
+static int __init cpu_suspend_init(void)
+{
+        suspend_pgd = pgd_alloc(&init_mm);
+        if (suspend_pgd) {
+                unsigned long addr = virt_to_phys(cpu_resume_mmu);
+                identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE);
+        }
+        return suspend_pgd ? 0 : -ENOMEM;
+}
+core_initcall(cpu_suspend_init);
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index e04c5fb6f1ee..1532b508c814 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 #include <linux/pm.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -319,6 +320,7 @@ static void at91sam9g45_poweroff(void)
 static void __init at91sam9g45_map_io(void)
 {
         at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
+        init_consistent_dma_size(SZ_4M);
 }
 
 static void __init at91sam9g45_initialize(void)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 2c611b9a0138..406bb6496805 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -128,8 +128,6 @@
 #define AT91SAM9G45_EHCI_BASE   0x00800000      /* USB Host controller (EHCI) */
 #define AT91SAM9G45_VDEC_BASE   0x00900000      /* Video Decoder Controller */
 
-#define CONSISTENT_DMA_SIZE     SZ_4M
-
 /*
  * DMA peripheral identifiers
  * for hardware handshaking interface
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index bc1e0b2e2f4f..0ed8648c6452 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldr     \rp, =(AT91_BASE_SYS + AT91_DBGU)       @ System peripherals (phys address)
         ldr     \rv, =(AT91_VA_BASE_SYS + AT91_DBGU)    @ System peripherals (virt address)
         .endm
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
index ed78aabb8e9f..6ae20a649a97 100644
--- a/arch/arm/mach-bcmring/include/mach/hardware.h
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -22,7 +22,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <mach/memory.h>
 #include <cfg_global.h>
 #include <mach/csp/mm_io.h>
 
@@ -31,7 +30,7 @@
  *  *_SIZE  is the size of the region
  *  *_BASE  is the virtual address
  */
-#define RAM_START               PLAT_PHYS_OFFSET
+#define RAM_START               PHYS_OFFSET
 
 #define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
 #define RAM_BASE                PAGE_OFFSET
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
deleted file mode 100644
index 15162e4c75f9..000000000000
--- a/arch/arm/mach-bcmring/include/mach/memory.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <cfg_global.h>
-
-/*
- * Physical vs virtual RAM address space conversion.  These are
- * private definitions which should NOT be used outside memory.h
- * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-
-#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
-
-/*
- * Maximum DMA memory allowed is 14M
- */
-#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
-
-#endif
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
index 0f1c37e4523a..8616876abb9f 100644
--- a/arch/arm/mach-bcmring/mm.c
+++ b/arch/arm/mach-bcmring/mm.c
@@ -13,6 +13,7 @@
 *****************************************************************************/
 
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
@@ -53,4 +54,6 @@ void __init bcmring_map_io(void)
 {
 
         iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+        /* Maximum DMA memory allowed is 14M */
+        init_consistent_dma_size(14 << 20);
 }
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 4a74b2c959bd..0276091b7f86 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -64,7 +64,7 @@ void __init autcpu12_map_io(void)
 
 MACHINE_START(AUTCPU12, "autronix autcpu12")
         /* Maintainer: Thomas Gleixner */
-        .boot_params    = 0xc0020000,
+        .atag_offset    = 0x20000,
         .map_io         = autcpu12_map_io,
         .init_irq       = clps711x_init_irq,
         .timer          = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 5a1689d48793..25b3bfd0e85a 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -55,7 +55,7 @@ static void __init cdb89712_map_io(void)
 
 MACHINE_START(CDB89712, "Cirrus-CDB89712")
         /* Maintainer: Ray Lehtiniemi */
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .map_io         = cdb89712_map_io,
         .init_irq       = clps711x_init_irq,
         .timer          = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 16481cf3e931..1df9ec67aa92 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -56,7 +56,7 @@ static void __init ceiva_map_io(void)
 
 MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
         /* Maintainer: Rob Scott */
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .map_io         = ceiva_map_io,
         .init_irq       = clps711x_init_irq,
         .timer          = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 0a2e74feb24a..80496c09ac59 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -36,7 +36,7 @@ fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi)
 
 MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
         /* Maintainer: Nobody */
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x0100,
         .fixup          = fixup_clep7312,
         .map_io         = clps711x_map_io,
         .init_irq       = clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 725a7a54ba42..9721f6111dc0 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -56,7 +56,7 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
 
 MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
         /* Maintainer: Jon McClintock */
-        .boot_params    = 0xc0020100,   /* 0xc0000000 - 0xc001ffff can be video RAM */
+        .atag_offset    = 0x20100,      /* 0xc0000000 - 0xc001ffff can be video RAM */
         .fixup          = fixup_edb7211,
         .map_io         = edb7211_map_io,
         .reserve        = edb7211_reserve,
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index 1947b30f9b8c..d99256687298 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -74,7 +74,6 @@ fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
 
 MACHINE_START(FORTUNET, "ARM-FortuNet")
         /* Maintainer: FortuNet Inc. */
-        .boot_params    = 0x00000000,
         .fixup          = fortunet_fixup,
         .map_io         = clps711x_map_io,
         .init_irq       = clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 507c6873b7ee..b802e8a51831 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
                 mov     \rp, #0x0000    @ UART1
 #else
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 3f796e0d3284..6ecea95f38b2 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -88,7 +88,7 @@ static void __init p720t_map_io(void)
 
 MACHINE_START(P720T, "ARM-Prospector720T")
         /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .fixup          = fixup_p720t,
         .map_io         = p720t_map_io,
         .init_irq       = clps711x_init_irq,
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 3e7d1496cb47..55f7b4b08ab9 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -197,7 +197,7 @@ static void __init cns3420_map_io(void)
 }
 
 MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = cns3420_map_io,
         .init_irq       = cns3xxx_init_irq,
         .timer          = &cns3xxx_timer,
diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
index 56d828634db5..d04c150baa1c 100644
--- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
  */
 
-                .macro  addruart,rp,rv
+                .macro  addruart,rp,rv,tmp
                 mov     \rp, #0x00009000
                 orr     \rv, \rp, #0xf0000000   @ virtual base
                 orr     \rp, \rp, #0x10000000
diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h
deleted file mode 100644
index dc16c5c5d86b..000000000000
--- a/arch/arm/mach-cns3xxx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET                UL(0x00000000)
-
-#define __phys_to_bus(x)        ((x) + PHYS_OFFSET)
-#define __bus_to_phys(x)        ((x) - PHYS_OFFSET)
-
-#define __virt_to_bus(v)        __phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b)        __phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p)         __phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b)         __phys_to_pfn(__bus_to_phys(b))
-
-#endif
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 84fd78684868..26d94c0b555c 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -676,7 +676,7 @@ static void __init da830_evm_map_io(void)
 }
 
 MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
-        .boot_params    = (DA8XX_DDR_BASE + 0x100),
+        .atag_offset    = 0x100,
         .map_io         = da830_evm_map_io,
         .init_irq       = cp_intc_init,
         .timer          = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 008d51407cd7..6e41cb5baeb4 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1291,7 +1291,7 @@ static void __init da850_evm_map_io(void)
 }
 
 MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
-        .boot_params    = (DA8XX_DDR_BASE + 0x100),
+        .atag_offset    = 0x100,
         .map_io         = da850_evm_map_io,
         .init_irq       = cp_intc_init,
         .timer          = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 241a6bd67408..65566280b7c9 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -351,7 +351,7 @@ static __init void dm355_evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-        .boot_params  = (0x80000100),
+        .atag_offset  = 0x100,
         .map_io       = dm355_evm_map_io,
         .init_irq     = davinci_irq_init,
         .timer        = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index bee284ca7fd6..b307470b071d 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -270,7 +270,7 @@ static __init void dm355_leopard_init(void)
 }
 
 MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-        .boot_params  = (0x80000100),
+        .atag_offset  = 0x100,
         .map_io       = dm355_leopard_map_io,
         .init_irq     = davinci_irq_init,
         .timer        = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9818f214d4f0..04c43abcca66 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -612,7 +612,7 @@ static __init void dm365_evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-        .boot_params    = (0x80000100),
+        .atag_offset    = 0x100,
         .map_io         = dm365_evm_map_io,
         .init_irq       = davinci_irq_init,
         .timer          = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 95607a191e03..a005e7691ddd 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -712,7 +712,7 @@ static __init void davinci_evm_init(void)
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
         /* Maintainer: MontaVista Software <source@mvista.com> */
-        .boot_params  = (DAVINCI_DDR_BASE + 0x100),
+        .atag_offset  = 0x100,
         .map_io       = davinci_evm_map_io,
         .init_irq     = davinci_irq_init,
         .timer        = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 993a3146fd35..337c45e3e44d 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -792,7 +792,7 @@ static __init void evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-        .boot_params  = (0x80000100),
+        .atag_offset  = 0x100,
         .map_io       = davinci_map_io,
         .init_irq     = davinci_irq_init,
         .timer        = &davinci_timer,
@@ -801,7 +801,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
-        .boot_params  = (0x80000100),
+        .atag_offset  = 0x100,
         .map_io       = davinci_map_io,
         .init_irq     = davinci_irq_init,
         .timer        = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index c278226627ad..6efc84cceca0 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -566,7 +566,7 @@ static void __init mityomapl138_map_io(void)
 }
 
 MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
-        .boot_params    = (DA8XX_DDR_BASE + 0x100),
+        .atag_offset    = 0x100,
         .map_io         = mityomapl138_map_io,
         .init_irq       = cp_intc_init,
         .timer          = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index d60a80028ba3..38d6f644d8b9 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -272,7 +272,7 @@ static __init void davinci_ntosd2_init(void)
 
 MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
         /* Maintainer: Neuros Technologies <neuros@groups.google.com> */
-        .boot_params    = (DAVINCI_DDR_BASE + 0x100),
+        .atag_offset    = 0x100,
         .map_io          = davinci_ntosd2_map_io,
         .init_irq       = davinci_irq_init,
         .timer          = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 237332a11421..c6701e4a795c 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -338,7 +338,7 @@ static void __init omapl138_hawk_map_io(void)
 }
 
 MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
-        .boot_params    = (DA8XX_DDR_BASE + 0x100),
+        .atag_offset    = 0x100,
         .map_io         = omapl138_hawk_map_io,
         .init_irq       = cp_intc_init,
         .timer          = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5f4385c0a089..5dd4da9d2308 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -151,7 +151,7 @@ static __init void davinci_sffsdr_init(void)
 
 MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
         /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
-        .boot_params  = (DAVINCI_DDR_BASE + 0x100),
+        .atag_offset  = 0x100,
         .map_io       = davinci_sffsdr_map_io,
         .init_irq     = davinci_irq_init,
         .timer        = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 782892065682..90ee7b5aabdc 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -277,7 +277,7 @@ console_initcall(tnetv107x_evm_console_init);
 #endif
 
 MACHINE_START(TNETV107X, "TNETV107X EVM")
-        .boot_params    = (TNETV107X_DDR_BASE + 0x100),
+        .atag_offset    = 0x100,
         .map_io         = tnetv107x_init,
         .init_irq       = cp_intc_init,
         .timer          = &davinci_timer,
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 1d2557394235..865ffe5899ac 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/etherdevice.h>
 #include <linux/davinci_emac.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
@@ -86,6 +87,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
                 iotable_init(davinci_soc_info.io_desc,
                                 davinci_soc_info.io_desc_num);
 
+        init_consistent_dma_size(14 << 20);
+
         /*
          * Normally devicemaps_init() would flush caches and tlb after
          * mdesc->map_io(), but we must also do it here because of the CPU
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index bd59f31b8a95..0b314bf16f7f 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -19,7 +19,7 @@
 #include <asm/proc-fns.h>
 
 #include <mach/cpuidle.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
 
 #define DAVINCI_CPUIDLE_MAX_STATES      2
 
diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/include/mach/ddr2.h
new file mode 100644
index 000000000000..c19e047d0e6a
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/ddr2.h
@@ -0,0 +1,4 @@
+#define DDR2_SDRCR_OFFSET       0xc
+#define DDR2_SRPD_BIT           (1 << 23)
+#define DDR2_MCLKSTOPEN_BIT     (1 << 30)
+#define DDR2_LPMODEN_BIT        (1 << 31)
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index f8b7ea4f6235..cf94552d5274 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -18,56 +18,50 @@
 
 #include <linux/serial_reg.h>
 
-#include <asm/memory.h>
-
 #include <mach/serial.h>
 
 #define UART_SHIFT      2
 
-#define davinci_uart_v2p(x)     ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define davinci_uart_p2v(x)     ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
                 .pushsection .data
 davinci_uart_phys:      .word   0
 davinci_uart_virt:      .word   0
                 .popsection
 
-                .macro addruart, rp, rv
+                .macro addruart, rp, rv, tmp
 
                 /* Use davinci_uart_phys/virt if already configured */
-10:             mrc     p15, 0, \rp, c1, c0
-                tst     \rp, #1                 @ MMU enabled?
-                ldreq   \rp, =davinci_uart_v2p(davinci_uart_phys)
-                ldrne   \rp, =davinci_uart_phys
-                add     \rv, \rp, #4            @ davinci_uart_virt
-                ldr     \rp, [\rp, #0]
-                ldr     \rv, [\rv, #0]
+10:             adr     \rp, 99f                @ get effective addr of 99f
+                ldr     \rv, [\rp]              @ get absolute addr of 99f
+                sub     \rv, \rv, \rp           @ offset between the two
+                ldr     \rp, [\rp, #4]          @ abs addr of omap_uart_phys
+                sub     \tmp, \rp, \rv          @ make it effective
+                ldr     \rp, [\tmp, #0]         @ davinci_uart_phys
+                ldr     \rv, [\tmp, #4]         @ davinci_uart_virt
                 cmp     \rp, #0                 @ is port configured?
                 cmpne   \rv, #0
-                bne     99f                     @ already configured
+                bne     100f                    @ already configured
 
                 /* Check the debug UART address set in uncompress.h */
-                mrc     p15, 0, \rp, c1, c0
-                tst     \rp, #1                 @ MMU enabled?
+                and     \rp, pc, #0xff000000
+                ldr     \rv, =DAVINCI_UART_INFO_OFS
+                add     \rp, \rp, \rv
 
                 /* Copy uart phys address from decompressor uart info */
-                ldreq   \rv, =davinci_uart_v2p(davinci_uart_phys)
-                ldrne   \rv, =davinci_uart_phys
-                ldreq   \rp, =DAVINCI_UART_INFO
-                ldrne   \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
-                ldr     \rp, [\rp, #0]
-                str     \rp, [\rv]
+                ldr     \rv, [\rp, #0]
+                str     \rv, [\tmp, #0]
 
                 /* Copy uart virt address from decompressor uart info */
-                ldreq   \rv, =davinci_uart_v2p(davinci_uart_virt)
-                ldrne   \rv, =davinci_uart_virt
-                ldreq   \rp, =DAVINCI_UART_INFO
-                ldrne   \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
-                ldr     \rp, [\rp, #4]
-                str     \rp, [\rv]
+                ldr     \rv, [\rp, #4]
+                str     \rv, [\tmp, #4]
 
                 b       10b
-99:
+
+                .align
+99:             .word   .
+                .word   davinci_uart_phys
+                .ltorg
+
+100:
                 .endm
 
                 .macro  senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
deleted file mode 100644
index 78731944a70c..000000000000
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * DaVinci memory space definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-#include <asm/page.h>
-#include <asm/sizes.h>
-
-/**************************************************************************
- * Definitions
- **************************************************************************/
-#define DAVINCI_DDR_BASE        0x80000000
-#define DA8XX_DDR_BASE          0xc0000000
-
-#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
-#error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
-#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
-#else
-#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
-#endif
-
-#define DDR2_SDRCR_OFFSET       0xc
-#define DDR2_SRPD_BIT           BIT(23)
-#define DDR2_MCLKSTOPEN_BIT     BIT(30)
-#define DDR2_LPMODEN_BIT        BIT(31)
-
-/*
- * Increase size of DMA-consistent memory region
- */
-#define CONSISTENT_DMA_SIZE (14<<20)
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index c9e6ce185a66..e347d88fef91 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -21,8 +21,9 @@
  * macros in debug-macro.S.
  *
  * This area sits just below the page tables (see arch/arm/kernel/head.S).
+ * We define it as a relative offset from start of usable RAM.
  */
-#define DAVINCI_UART_INFO       (PLAT_PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO_OFS   0x3ff8
 
 #define DAVINCI_UART0_BASE      (IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE      (IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 78d80683cdc2..9dc7cf9664fe 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -43,7 +43,12 @@ static inline void flush(void)
 
 static inline void set_uart_info(u32 phys, void * __iomem virt)
 {
-        u32 *uart_info = (u32 *)(DAVINCI_UART_INFO);
+        /*
+         * Get address of some.bss variable and round it down
+         * a la CONFIG_AUTO_ZRELADDR.
+         */
+        u32 ram_start = (u32)&uart & 0xf8000000;
+        u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
 
         uart = (u32 *)phys;
         uart_info[0] = phys;
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index 5f1e045a3ad1..d4e9316ecacb 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -22,7 +22,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/psc.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 03e11f9dca97..c8a406f7e946 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -87,7 +87,7 @@ static void __init cm_a510_init(void)
 }
 
 MACHINE_START(CM_A510, "Compulab CM-A510 Board")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = cm_a510_init,
         .map_io         = dove_map_io,
         .init_early     = dove_init_early,
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 2ac34ecfa745..11ea34e4fc76 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -94,7 +94,7 @@ static void __init dove_db_init(void)
 }
 
 MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = dove_db_init,
         .map_io         = dove_map_io,
         .init_early     = dove_init_early,
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index da8bf2bad3b1..5929cbc59161 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldr     \rp, =DOVE_SB_REGS_PHYS_BASE
         ldr     \rv, =DOVE_SB_REGS_VIRT_BASE
         orr     \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
deleted file mode 100644
index bbc93fee6c75..000000000000
--- a/arch/arm/mach-dove/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET                UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 087bc771ac23..d0ce8abdd4b6 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -280,7 +280,7 @@ arch_initcall(ebsa110_init);
 
 MACHINE_START(EBSA110, "EBSA110")
         /* Maintainer: Russell King */
-        .boot_params    = 0x00000400,
+        .atag_offset    = 0x400,
         .reserve_lp0    = 1,
         .reserve_lp2    = 1,
         .soft_reboot    = 1,
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 7ef5690fd08c..bb02c05e6812 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 **/
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0xf0000000
                 orr     \rp, \rp, #0x00000be0
                 mov     \rp, \rv
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 61b98ce4b673..0713448206a5 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -33,7 +33,7 @@ static void __init adssphere_init_machine(void)
 
 MACHINE_START(ADSSPHERE, "ADS Sphere board")
         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 3f320c6477bf..c63a5ec1a8e3 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -241,7 +241,7 @@ static void __init edb93xx_init_machine(void)
 #ifdef CONFIG_MACH_EDB9301
 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
         /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
@@ -252,7 +252,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9302
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
         /* Maintainer: George Kashperko <george@chas.com.ua> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
@@ -263,7 +263,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9302A
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-        .boot_params    = EP93XX_SDCE0_PHYS_BASE + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
@@ -274,7 +274,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9307
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
         /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
@@ -285,7 +285,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9307A
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
         /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-        .boot_params    = EP93XX_SDCE0_PHYS_BASE + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
@@ -296,7 +296,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9312
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
         /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
@@ -307,7 +307,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9315
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
@@ -318,7 +318,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9315A
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-        .boot_params    = EP93XX_SDCE0_PHYS_BASE + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 9bd3152bff9a..45ee205856f8 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -33,7 +33,7 @@ static void __init gesbc9312_init_machine(void)
 
 MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index b25bc9076367..af54e43132cf 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/ep93xx-regs.h>
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 ldr     \rp, =EP93XX_APB_PHYS_BASE      @ Physical base
                 ldr     \rv, =EP93XX_APB_VIRT_BASE      @ virtual base
                 orr     \rp, \rp, #0x000c0000
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 7adea6258efe..e72f7368876e 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -77,7 +77,7 @@ static void __init micro9_init_machine(void)
 #ifdef CONFIG_MACH_MICRO9H
 MACHINE_START(MICRO9, "Contec Micro9-High")
         /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
@@ -88,7 +88,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9M
 MACHINE_START(MICRO9M, "Contec Micro9-Mid")
         /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
@@ -99,7 +99,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9L
 MACHINE_START(MICRO9L, "Contec Micro9-Lite")
         /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
@@ -110,7 +110,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9S
 MACHINE_START(MICRO9S, "Contec Micro9-Slim")
         /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 1a472ff12cce..d6f286b4db9c 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -65,8 +65,8 @@ static void __init simone_init_machine(void)
 }
 
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-/* Maintainer: Ryan Mallon */
-        .boot_params    = EP93XX_SDCE0_PHYS_BASE + 0x100,
+        /* Maintainer: Ryan Mallon */
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 4f4b0b2c4c31..2b4d4b0201df 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -163,7 +163,7 @@ static void __init snappercl15_init_machine(void)
 
 MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
         /* Maintainer: Ryan Mallon */
-        .boot_params    = EP93XX_SDCE0_PHYS_BASE + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c2d2cf40ead9..1ade3c340507 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -257,7 +257,7 @@ static void __init ts72xx_init_machine(void)
 
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ts72xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S
index a442ef861167..6cacf16a67a6 100644
--- a/arch/arm/mach-exynos4/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
          * aligned and add in the offset when we load the value here.
          */
 
-        .macro addruart, rp, rv
+        .macro addruart, rp, rv, tmp
                 ldr     \rp, = S3C_PA_UART
                 ldr     \rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index d7a1e281ce7a..006a4f4c65c6 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -55,7 +55,7 @@
 
                 bic     \irqnr, \irqstat, #0x1c00
 
-                cmp     \irqnr, #29
+                cmp     \irqnr, #15
                 cmpcc   \irqnr, \irqnr
                 cmpne   \irqnr, \tmp
                 cmpcs   \irqnr, \irqnr
@@ -76,8 +76,3 @@
                 strcc   \irqstat, [\base, #GIC_CPU_EOI]
                 cmpcs   \irqnr, \irqnr
                 .endm
-
-                /* As above, this assumes that irqstat and base are preserved.. */
-
-                .macro test_for_ltirq, irqnr, irqstat, base, tmp
-                .endm
diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c
index b482c6285fc4..f0ca6c157d29 100644
--- a/arch/arm/mach-exynos4/mach-armlex4210.c
+++ b/arch/arm/mach-exynos4/mach-armlex4210.c
@@ -207,7 +207,7 @@ static void __init armlex4210_machine_init(void)
 
 MACHINE_START(ARMLEX4210, "ARMLEX4210")
         /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = armlex4210_map_io,
         .init_machine   = armlex4210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 43be71b799cb..6e0536818bf5 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -1152,7 +1152,7 @@ static void __init nuri_machine_init(void)
 
 MACHINE_START(NURI, "NURI")
         /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = nuri_map_io,
         .init_machine   = nuri_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
index a7c65e05c1eb..b24ddd7ad8fe 100644
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ b/arch/arm/mach-exynos4/mach-smdkc210.c
@@ -301,7 +301,7 @@ static void __init smdkc210_machine_init(void)
 
 MACHINE_START(SMDKC210, "SMDKC210")
         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = smdkc210_map_io,
         .init_machine   = smdkc210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index ea4149556860..d90fcddbee1f 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -255,7 +255,7 @@ static void __init smdkv310_machine_init(void)
 MACHINE_START(SMDKV310, "SMDKV310")
         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
         /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = smdkv310_map_io,
         .init_machine   = smdkv310_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index b3b5d8911004..2aac6f755c8e 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -762,7 +762,7 @@ static void __init universal_machine_init(void)
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
         /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = universal_map_io,
         .init_machine   = universal_machine_init,
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index ddd86864fb83..582b874aab0e 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -386,9 +386,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 
         if (cpu == 0) {
                 mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+                evt->irq = IRQ_MCT_L0;
                 setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
         } else {
                 mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+                evt->irq = IRQ_MCT_L1;
                 setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
                 irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
         }
@@ -402,9 +404,10 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
         return 0;
 }
 
-int local_timer_ack(void)
+void local_timer_stop(struct clock_event_device *evt)
 {
-        return 0;
+        evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+        disable_irq(evt->irq);
 }
 
 #endif /* CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 206ff2f39d6c..d5f178540928 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -85,7 +85,7 @@ fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi)
 
 MACHINE_START(CATS, "Chalice-CATS")
         /* Maintainer: Philip Blundell */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .soft_reboot    = 1,
         .fixup          = fixup_cats,
         .map_io         = footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 2ef69ff44ba8..012210cf7d16 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -15,7 +15,7 @@
 
 MACHINE_START(EBSA285, "EBSA285")
         /* Maintainer: Russell King */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .video_start    = 0x000a0000,
         .video_end      = 0x000bffff,
         .map_io         = footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 1be2eeb7a0a0..e5acde25ffc5 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
 
 #ifndef CONFIG_DEBUG_DC21285_PORT
         /* For NetWinder debugging */
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x000003f8
                 orr     \rv, \rp, #0xff000000   @ virtual
                 orr     \rp, \rp, #0x7c000000   @ physical
@@ -31,7 +31,7 @@
                 .equ    dc21285_high, ARMCSR_BASE & 0xff000000
                 .equ    dc21285_low,  ARMCSR_BASE & 0x00ffffff
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 .if     dc21285_low
                 mov     \rp, #dc21285_low
                 .else
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 0f7aeff486c9..0d3846f3b60d 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -647,7 +647,7 @@ fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi)
 
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
         /* Maintainer: Russell King/Rebel.com */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .video_start    = 0x000a0000,
         .video_end      = 0x000bffff,
         .reserve_lp0    = 1,
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index 3285e91ca8c1..f41dba39b327 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -15,7 +15,7 @@
 
 MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
         /* Maintainer: Jamey Hicks / George France */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = footbridge_map_io,
         .init_irq       = footbridge_init_irq,
         .timer          = &footbridge_timer,
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 0cf7a07c3f3f..5927d3c253aa 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -102,7 +102,7 @@ static void __init ib4220b_init(void)
 }
 
 MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
-        .boot_params    = 0x100,
+        .atag_offset    = 0x100,
         .map_io         = gemini_map_io,
         .init_irq       = gemini_init_irq,
         .timer          = &ib4220b_timer,
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index 4fa09af99495..cd7437a1cea0 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -86,7 +86,7 @@ static void __init rut1xx_init(void)
 }
 
 MACHINE_START(RUT100, "Teltonika RUT100")
-        .boot_params    = 0x100,
+        .atag_offset    = 0x100,
         .map_io         = gemini_map_io,
         .init_irq       = gemini_init_irq,
         .timer          = &rut1xx_timer,
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 88cc422ee444..a367880368f1 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -129,7 +129,7 @@ static void __init wbd111_init(void)
 }
 
 MACHINE_START(WBD111, "Wiliboard WBD-111")
-        .boot_params    = 0x100,
+        .atag_offset    = 0x100,
         .map_io         = gemini_map_io,
         .init_irq       = gemini_init_irq,
         .timer          = &wbd111_timer,
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index 3a220347bc88..f382811c1319 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -129,7 +129,7 @@ static void __init wbd222_init(void)
 }
 
 MACHINE_START(WBD222, "Wiliboard WBD-222")
-        .boot_params    = 0x100,
+        .atag_offset    = 0x100,
         .map_io         = gemini_map_io,
         .init_irq       = gemini_init_irq,
         .timer          = &wbd222_timer,
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index f40e006d296e..837670763b85 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/hardware.h>
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldr     \rp, =GEMINI_UART_BASE                  @ physical
         ldr     \rv, =IO_ADDRESS(GEMINI_UART_BASE)      @ virtual
         .endm
diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h
deleted file mode 100644
index a50915f764d8..000000000000
--- a/arch/arm/mach-gemini/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#ifdef CONFIG_GEMINI_MEM_SWAP
-# define PLAT_PHYS_OFFSET       UL(0x00000000)
-#else
-# define PLAT_PHYS_OFFSET       UL(0x10000000)
-#endif
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 65f1bea958e5..9886f19805f4 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -29,7 +29,7 @@
 
 MACHINE_START(H7201, "Hynix GMS30C7201")
         /* Maintainer: Robert Schwebel, Pengutronix */
-        .boot_params    = 0xc0001000,
+        .atag_offset    = 0x1000,
         .map_io         = h720x_map_io,
         .init_irq       = h720x_init_irq,
         .timer          = &h7201_timer,
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 884584a09752..284a134819e1 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -71,7 +71,7 @@ static void __init init_eval_h7202(void)
 
 MACHINE_START(H7202, "Hynix HMS30C7202")
         /* Maintainer: Robert Schwebel, Pengutronix */
-        .boot_params    = 0x40000100,
+        .atag_offset    = 0x100,
         .map_io         = h720x_map_io,
         .init_irq       = h7202_init_irq,
         .timer          = &h7202_timer,
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index c2093e835720..8a46157b0582 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
                 .equ    io_virt, IO_VIRT
                 .equ    io_phys, IO_PHYS
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x00020000        @ UART1
                 add     \rv, \rp, #io_virt      @ virtual address
                 add     \rp, \rp, #io_phys      @ physical base address
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
deleted file mode 100644
index 96dcf50c51d3..000000000000
--- a/arch/arm/mach-h720x/include/mach/memory.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/memory.h
- *
- * Copyright (c) 2000 Jungjun Kim
- *
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x40000000)
-#endif
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index ede2710f8b76..215259083945 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -558,7 +558,7 @@ static struct sys_timer armadillo5x0_timer = {
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
         /* Maintainer: Alberto Panizzo  */
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx31_map_io,
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index f851fe903687..b1ec2cf53bb0 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -311,7 +311,7 @@ static struct sys_timer eukrea_cpuimx27_timer = {
 };
 
 MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
-        .boot_params = MX27_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 4bd083ba9af2..470b654b0e6e 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -194,7 +194,7 @@ struct sys_timer eukrea_cpuimx35_timer = {
 
 MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
         /* Maintainer: Eukrea Electromatique */
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx35_map_io,
         .init_early = imx35_init_early,
         .init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 2442d5da883d..9163318e95a2 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -163,7 +163,7 @@ static struct sys_timer eukrea_cpuimx25_timer = {
 
 MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
         /* Maintainer: Eukrea Electromatique */
-        .boot_params = MX25_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx25_map_io,
         .init_early = imx25_init_early,
         .init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 6778f8193bc6..22306ce28658 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -275,7 +275,7 @@ static struct sys_timer visstrim_m10_timer = {
 };
 
 MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
-        .boot_params = MX27_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 272f793e9247..8da48b33fc53 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -71,7 +71,7 @@ static struct sys_timer mx27ipcam_timer = {
 
 MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
         /* maintainer: Freescale Semiconductor, Inc. */
-        .boot_params = MX27_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index d81a769fe895..21a14a20e2c3 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -77,7 +77,7 @@ static struct sys_timer mx27lite_timer = {
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-        .boot_params = MX27_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index e472a1d88058..7c20e9e58006 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -271,7 +271,7 @@ static struct sys_timer kzm_timer = {
 };
 
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = kzm_map_io,
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 5cd8bee46960..530ea08dbafd 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -145,7 +145,7 @@ struct sys_timer mx1ads_timer = {
 
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
         /* Maintainer: Sascha Hauer, Pengutronix */
-        .boot_params = MX1_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx1_map_io,
         .init_early = imx1_init_early,
         .init_irq = mx1_init_irq,
@@ -154,7 +154,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
-        .boot_params = MX1_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx1_map_io,
         .init_early = imx1_init_early,
         .init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index d389ecf9b5a8..e56828da26b2 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -305,7 +305,7 @@ static struct sys_timer mx21ads_timer = {
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
         /* maintainer: Freescale Semiconductor, Inc. */
-        .boot_params = MX21_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx21ads_map_io,
         .init_early = imx21_init_early,
         .init_irq = mx21_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 7f66a91df361..dd25ee82e70a 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -253,7 +253,7 @@ static struct sys_timer mx25pdk_timer = {
 
 MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
         /* Maintainer: Freescale Semiconductor, Inc. */
-        .boot_params = MX25_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx25_map_io,
         .init_early = imx25_init_early,
         .init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 6fa6934ab150..2eafbac2c763 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -421,7 +421,7 @@ static struct sys_timer mx27pdk_timer = {
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
         /* maintainer: Freescale Semiconductor, Inc. */
-        .boot_params = MX27_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index e1addc1a5813..635b0509068b 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -344,7 +344,7 @@ static void __init mx27ads_map_io(void)
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
         /* maintainer: Freescale Semiconductor, Inc. */
-        .boot_params = MX27_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx27ads_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index c20be7530927..589066fb3316 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -764,7 +764,7 @@ static void __init mx31_3ds_reserve(void)
 
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
         /* Maintainer: Freescale Semiconductor, Inc. */
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx31_map_io,
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 29ca8907a780..910c4561d35f 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -535,7 +535,7 @@ static struct sys_timer mx31ads_timer = {
 
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
         /* Maintainer: Freescale Semiconductor, Inc. */
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx31ads_map_io,
         .init_early = imx31_init_early,
         .init_irq = mx31ads_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 126913ad106a..e92eaf91a7be 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -295,7 +295,7 @@ static struct sys_timer mx31lilly_timer = {
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx31_map_io,
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 4b47fd9fdd89..5242cb78b563 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -280,7 +280,7 @@ struct sys_timer mx31lite_timer = {
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
         /* Maintainer: Freescale Semiconductor, Inc. */
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx31lite_map_io,
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index b358383120e7..1d01ef28f25d 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -567,7 +567,7 @@ static void __init mx31moboard_reserve(void)
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
         /* Maintainer: Valentin Longchamp, EPFL Mobots group */
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .reserve = mx31moboard_reserve,
         .map_io = mx31_map_io,
         .init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index b3b9bd8ac2a3..f2a873dc08ce 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -217,7 +217,7 @@ struct sys_timer mx35pdk_timer = {
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
         /* Maintainer: Freescale Semiconductor, Inc */
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx35_map_io,
         .init_early = imx35_init_early,
         .init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index c85876fed663..5ec3989704fd 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -267,7 +267,7 @@ static struct sys_timer mxt_td60_timer = {
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
         /* maintainer: Maxtrack Industrial */
-        .boot_params = MX27_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 71083aa16038..0f6bd1199038 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -435,7 +435,7 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-        .boot_params = MX27_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index f45b7cd72c8a..186d4eb90796 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -688,7 +688,7 @@ static void __init pcm037_reserve(void)
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
         /* Maintainer: Pengutronix */
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .reserve = pcm037_reserve,
         .map_io = mx31_map_io,
         .init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 2d6a64bbac44..091bcf87e1a0 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -349,7 +349,7 @@ static struct sys_timer pcm038_timer = {
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-        .boot_params = MX27_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 660ec3e80cf8..0a4d31de7738 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -418,7 +418,7 @@ struct sys_timer pcm043_timer = {
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
         /* Maintainer: Pengutronix */
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx35_map_io,
         .init_early = imx35_init_early,
         .init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 3626f486498a..9e11359c324c 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -262,7 +262,7 @@ static struct sys_timer qong_timer = {
 
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
         /* Maintainer: DENX Software Engineering GmbH */
-        .boot_params = MX3x_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx31_map_io,
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index db2d60470e15..85d32845ee1e 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -137,7 +137,7 @@ static struct sys_timer scb9328_timer = {
 
 MACHINE_START(SCB9328, "Synertronixx scb9328")
         /* Sascha Hauer */
-        .boot_params = 0x08000100,
+        .atag_offset = 100,
         .map_io = mx1_map_io,
         .init_early = imx1_init_early,
         .init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index a1f598fd3a56..411b116077e4 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x16000000        @ physical base address
                 mov     \rv, #0xf0000000        @ virtual base
                 add     \rv, \rv, #0x16000000 >> 4
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index f2119908a0b3..a1769f35a86e 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -465,7 +465,7 @@ static struct sys_timer ap_timer = {
 
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
         /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .reserve        = integrator_reserve,
         .map_io         = ap_map_io,
         .init_early     = integrator_init_early,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4eb03ab5cb46..5de49c33e4d4 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -492,7 +492,7 @@ static struct sys_timer cp_timer = {
 
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
         /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .reserve        = integrator_reserve,
         .map_io         = intcp_map_io,
         .init_early     = intcp_init_early,
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index e664466d51bf..d869a6f67e5c 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         mov     \rp, #0x00002300
         orr     \rp, \rp, #0x00000040
         orr     \rv, \rp, #0xfe000000   @ virtual
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 23dfaffc586c..4cf2cc477eae 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -91,7 +91,7 @@ static struct sys_timer iq81340mc_timer = {
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
         /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = iop13xx_map_io,
         .init_irq       = iop13xx_init_irq,
         .timer          = &iq81340mc_timer,
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index df3492a9c280..cd9e27499a1e 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -93,7 +93,7 @@ static struct sys_timer iq81340sc_timer = {
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
         /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = iop13xx_map_io,
         .init_irq       = iop13xx_init_irq,
         .timer          = &iq81340sc_timer,
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 6cbffbfc2bba..4325055d4e19 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -203,7 +203,7 @@ static void __init em7210_init_machine(void)
 }
 
 MACHINE_START(EM7210, "Lanner EM7210")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = em7210_map_io,
         .init_irq       = iop32x_init_irq,
         .timer          = &em7210_timer,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index ceef5d4dce1a..0edc88020577 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -207,7 +207,7 @@ static void __init glantank_init_machine(void)
 
 MACHINE_START(GLANTANK, "GLAN Tank")
         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = glantank_map_io,
         .init_irq       = iop32x_init_irq,
         .timer          = &glantank_timer,
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index ff9e76c09f35..363bdf90b34d 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0xfe000000        @ physical as well as virtual
                 orr     \rp, \rp, #0x00800000   @ location of the UART
                 mov     \rv, \rp
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
deleted file mode 100644
index 169cc239f76c..000000000000
--- a/arch/arm/mach-iop32x/include/mach/memory.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET        UL(0xa0000000)
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 3a62514dae7c..9e7aaccfeba0 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -313,7 +313,7 @@ __setup("force_ep80219", force_ep80219_setup);
 
 MACHINE_START(IQ31244, "Intel IQ31244")
         /* Maintainer: Intel Corp. */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = iq31244_map_io,
         .init_irq       = iop32x_init_irq,
         .timer          = &iq31244_timer,
@@ -327,7 +327,7 @@ MACHINE_END
  */
 MACHINE_START(EP80219, "Intel EP80219")
         /* Maintainer: Intel Corp. */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = iq31244_map_io,
         .init_irq       = iop32x_init_irq,
         .timer          = &iq31244_timer,
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 35b7e6914d3b..53ea86f649dd 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -186,7 +186,7 @@ static void __init iq80321_init_machine(void)
 
 MACHINE_START(IQ80321, "Intel IQ80321")
         /* Maintainer: Intel Corp. */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = iq80321_map_io,
         .init_irq       = iop32x_init_irq,
         .timer          = &iq80321_timer,
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 1a374eab6007..d7269279968c 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -327,7 +327,7 @@ static void __init n2100_init_machine(void)
 
 MACHINE_START(N2100, "Thecus N2100")
         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = n2100_map_io,
         .init_irq       = iop32x_init_irq,
         .timer          = &n2100_timer,
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index 40c500dd1fac..361be1f6026e 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x00ff0000
                 orr     \rp, \rp, #0x0000f700
                 orr     \rv, #0xfe000000        @ virtual
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
deleted file mode 100644
index 8e1daf7006b6..000000000000
--- a/arch/arm/mach-iop33x/include/mach/memory.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 637c0272d5e0..9e14ccc56f8e 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -141,7 +141,7 @@ static void __init iq80331_init_machine(void)
 
 MACHINE_START(IQ80331, "Intel IQ80331")
         /* Maintainer: Intel Corp. */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = iop3xx_map_io,
         .init_irq       = iop33x_init_irq,
         .timer          = &iq80331_timer,
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 90a0436d7255..09c899a2523f 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -141,7 +141,7 @@ static void __init iq80332_init_machine(void)
 
 MACHINE_START(IQ80332, "Intel IQ80332")
         /* Maintainer: Intel Corp. */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = iop3xx_map_io,
         .init_irq       = iop33x_init_irq,
         .timer          = &iq80332_timer,
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 62c60ade5274..af9994537e01 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -254,7 +254,7 @@ static void __init enp2611_init_machine(void)
 
 MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = enp2611_map_io,
         .init_irq       = ixp2000_init_irq,
         .timer          = &enp2611_timer,
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 0ef533b20972..bdd3ccdc2890 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x00030000
 #ifdef  __ARMEB__
                 orr     \rp, \rp, #0x00000003
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 5bad1a8419b7..f7dfd9700141 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -171,7 +171,7 @@ void __init ixdp2400_init_irq(void)
 
 MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
         /* Maintainer: MontaVista Software, Inc. */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = ixdp2x00_map_io,
         .init_irq       = ixdp2400_init_irq,
         .timer          = &ixdp2400_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 3d3cef876467..d33bcac1ec92 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -286,7 +286,7 @@ void __init ixdp2800_init_irq(void)
 
 MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
         /* Maintainer: MontaVista Software, Inc. */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = ixdp2x00_map_io,
         .init_irq       = ixdp2800_init_irq,
         .timer          = &ixdp2800_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index be2a254f1374..61a28676b5be 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -417,7 +417,7 @@ static void __init ixdp2x01_init_machine(void)
 #ifdef CONFIG_ARCH_IXDP2401
 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
         /* Maintainer: MontaVista Software, Inc. */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = ixdp2x01_map_io,
         .init_irq       = ixdp2x01_init_irq,
         .timer          = &ixdp2x01_timer,
@@ -428,7 +428,7 @@ MACHINE_END
 #ifdef CONFIG_ARCH_IXDP2801
 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
         /* Maintainer: MontaVista Software, Inc. */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = ixdp2x01_map_io,
         .init_irq       = ixdp2x01_init_irq,
         .timer          = &ixdp2x01_timer,
@@ -441,7 +441,7 @@ MACHINE_END
  */
 MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
         /* Maintainer: MontaVista Software, Inc. */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = ixdp2x01_map_io,
         .init_irq       = ixdp2x01_init_irq,
         .timer          = &ixdp2x01_timer,
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index e25e5fe183ba..30dd31652e9d 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -88,6 +88,6 @@ MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
         .map_io         = ixp23xx_map_io,
         .init_irq       = ixp23xx_init_irq,
         .timer          = &ixp23xx_timer,
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = espresso_init,
 MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index f7c6eef7fa22..5ff524c13744 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
  */
 #include <mach/ixp23xx.h>
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 ldr     \rp, =IXP23XX_PERIPHERAL_PHYS   @ physical
                 ldr     \rv, =IXP23XX_PERIPHERAL_VIRT   @ virtual
 #ifdef __ARMEB__
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index ec028e35f401..b3a57e0f3419 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -331,6 +331,6 @@ MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
         .map_io         = ixdp2351_map_io,
         .init_irq       = ixdp2351_init_irq,
         .timer          = &ixp23xx_timer,
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = ixdp2351_init,
 MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 844551d2368b..8f4dcbba9025 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -175,6 +175,6 @@ MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
         .map_io         = ixp23xx_map_io,
         .init_irq       = ixp23xx_init_irq,
         .timer          = &ixp23xx_timer,
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = roadrunner_init,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index ee19c1d383aa..37609a22c450 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -167,7 +167,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = avila_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
@@ -185,7 +185,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = avila_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index e24564b5d935..81dfec31842b 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -112,7 +112,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = coyote_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
@@ -130,7 +130,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = coyote_init,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 96e378345801..8837fbca27ce 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -278,7 +278,7 @@ static void __init dsmg600_init(void)
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
         /* Maintainer: www.nslu2-linux.org */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &dsmg600_timer,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 72333a039431..2887c3578c17 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -272,7 +272,7 @@ MACHINE_START(FSG, "Freecom FSG-3")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = fsg_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d4f851bdd9a4..d69d1b053bb7 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -99,7 +99,7 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = gateway7001_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 7548d9a2efe2..bf6678d1a929 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -499,7 +499,7 @@ MACHINE_START(GORAMO_MLR, "MultiLink")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = gmlr_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 3790dffd3c30..aa029fc19140 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -167,7 +167,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = gtwx5715_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index b974a49c0aff..8c9f8d564492 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
 #ifdef __ARMEB__
                 mov     \rp, #3         @ Uart regs are at off set of 3 if
                                         @ byte writes used - Big Endian.
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
deleted file mode 100644
index 4caf1761f1e2..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/memory.h
- *
- * Copyright (c) 2001-2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 6a2927956bf6..f235f829dfa6 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -256,7 +256,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = ixdp425_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
@@ -270,7 +270,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = ixdp425_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
@@ -284,7 +284,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = ixdp425_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
@@ -298,7 +298,7 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = ixdp425_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index b752fa4d6927..de716fa1aab6 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -313,7 +313,7 @@ static void __init nas100d_init(void)
 
 MACHINE_START(NAS100D, "Iomega NAS 100d")
         /* Maintainer: www.nslu2-linux.org */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 0411a0a01071..ac81ccb26bfe 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -299,7 +299,7 @@ static void __init nslu2_init(void)
 
 MACHINE_START(NSLU2, "Linksys NSLU2")
         /* Maintainer: www.nslu2-linux.org */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &nslu2_timer,
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 045336c833af..27e469ef4523 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -239,7 +239,7 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = vulcan_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 40b9fad800b8..b14144b967a7 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -100,7 +100,7 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
         .map_io         = ixp4xx_map_io,
         .init_irq       = ixp4xx_init_irq,
         .timer          = &ixp4xx_timer,
-        .boot_params    = 0x0100,
+        .atag_offset    = 0x100,
         .init_machine   = wg302v2_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 043cfd5e140b..f457e07a65f0 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -221,7 +221,7 @@ static void __init d2net_v2_init(void)
 }
 
 MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = d2net_v2_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index bff04e04d679..ff4c21c1f923 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -97,7 +97,7 @@ subsys_initcall(db88f6281_pci_init);
 
 MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
         /* Maintainer: Saeed Bishara <saeed@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = db88f6281_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index f14dfb8508c5..e4d199b2b1e8 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -102,7 +102,7 @@ static void __init dockstar_init(void)
 }
 
 MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = dockstar_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 41d1b40696a3..6c40f784b516 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,7 +121,7 @@ static void __init guruplug_init(void)
 
 MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
         /* Maintainer: Siddarth Gore <gores@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = guruplug_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index db06ae437d08..f785d401a607 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldr     \rp, =KIRKWOOD_REGS_PHYS_BASE
         ldr     \rv, =KIRKWOOD_REGS_VIRT_BASE
         orr     \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
deleted file mode 100644
index 4600b44e3ad3..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET                UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 00cca22eca6f..9a1e917352f7 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -163,7 +163,7 @@ subsys_initcall(mv88f6281gtw_ge_pci_init);
 
 MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
         /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = mv88f6281gtw_ge_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 7cdab5776452..8849bcc7328e 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -258,7 +258,7 @@ static void __init netspace_v2_init(void)
 
 #ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = netspace_v2_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
@@ -269,7 +269,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_INETSPACE_V2
 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = netspace_v2_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
@@ -280,7 +280,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_NETSPACE_MAX_V2
 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = netspace_v2_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 6be627deb0fc..1ba12c4dff8f 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -399,7 +399,7 @@ static void __init netxbig_v2_init(void)
 
 #ifdef CONFIG_MACH_NET2BIG_V2
 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = netxbig_v2_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
@@ -410,7 +410,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_NET5BIG_V2
 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = netxbig_v2_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index f69beeff4450..5660ca6c3d88 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -214,7 +214,7 @@ subsys_initcall(openrd_pci_init);
 #ifdef CONFIG_MACH_OPENRD_BASE
 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
         /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = openrd_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
@@ -226,7 +226,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_OPENRD_CLIENT
 MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
         /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = openrd_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
@@ -238,7 +238,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_OPENRD_ULTIMATE
 MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
         /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = openrd_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 75c6601b8d87..6663869773ab 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -79,7 +79,7 @@ subsys_initcall(rd88f6192_pci_init);
 
 MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
         /* Maintainer: Saeed Bishara <saeed@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = rd88f6192_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 0f75494d5902..66b3c05e37a6 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -115,7 +115,7 @@ subsys_initcall(rd88f6281_pci_init);
 
 MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
         /* Maintainer: Saeed Bishara <saeed@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = rd88f6281_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 17de0bf53c08..8b102d62e82c 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -138,7 +138,7 @@ static void __init sheevaplug_init(void)
 #ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
         /* Maintainer: shadi Ammouri <shadi@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = sheevaplug_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
@@ -149,7 +149,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
 MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = sheevaplug_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index e6b9b1b22a35..ea104fb5ec3d 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -201,7 +201,7 @@ subsys_initcall(hp_t5325_pci_init);
 
 MACHINE_START(T5325, "HP t5325 Thin Client")
         /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = hp_t5325_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 68f32f2bf552..262c034836d4 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -132,7 +132,7 @@ subsys_initcall(ts219_pci_init);
 
 MACHINE_START(TS219, "QNAP TS-119/TS-219")
         /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = qnap_ts219_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index d5d009970705..b68f5b4a9ec8 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -176,7 +176,7 @@ subsys_initcall(ts41x_pci_init);
 
 MACHINE_START(TS41X, "QNAP TS-41x")
         /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = qnap_ts41x_init,
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 3d7d11436aa5..a91f99d265aa 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -223,7 +223,7 @@ static void __init acs5k_init(void)
 
 MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
         /* Maintainer: Simtec Electronics. */
-        .boot_params    = KS8695_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = acs5k_init,
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index c3c867ac4155..d24bcef2e2dd 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -121,7 +121,7 @@ static void __init dsm320_init(void)
 
 MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
         /* Maintainer: Simtec Electronics. */
-        .boot_params    = KS8695_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = dsm320_init,
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 9b9c47cc6471..16c95657f8fd 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -53,7 +53,7 @@ static void __init micrel_init(void)
 
 MACHINE_START(KS8695, "KS8695 Centaur Development Board")
         /* Maintainer: Micrel Semiconductor Inc. */
-        .boot_params    = KS8695_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = micrel_init,
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index bf516adf1925..a79e48981202 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-uart.h>
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
                 ldr     \rp, =KS8695_UART_PA            @ physical base address
                 ldr     \rv, =KS8695_UART_VA            @ virtual base address
         .endm
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index b0a2db77d392..0b4e760159b9 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
                 .equ    io_virt, IO_BASE
                 .equ    io_phys, IO_START
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x00044000        @ UART1
 @               mov     \rp, #0x00045000        @ UART2
                 add     \rv, \rp, #io_virt      @ virtual address
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
index 629e744aeb9e..351bd6c84909 100644
--- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
  * Debug output is hardcoded to standard UART 5
 */
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldreq   \rp, =0x40090000
         ldrne   \rv, =0xF4090000
         .endm
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h
deleted file mode 100644
index a647dd624afa..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/memory.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset of bank 0
- */
-#define PLAT_PHYS_OFFSET        UL(0x80000000)
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index c3a22fd736aa..6d2f0d1b9373 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -383,7 +383,7 @@ arch_initcall(lpc32xx_display_uid);
 
 MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
         /* Maintainer: Kevin Wells, NXP Semiconductors */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .map_io         = lpc32xx_map_io,
         .init_irq       = lpc32xx_init_irq,
         .timer          = &lpc32xx_timer,
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index 7e2ebd3efc7c..b6f14d203c25 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 
 #include <mach/addr-map.h>
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 ldr     \rp, =APB_PHYS_BASE             @ physical
                 ldr     \rv, =APB_VIRT_BASE             @ virtual
                 orr     \rp, \rp, #0x00017000
diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h
deleted file mode 100644
index d68b50a2d6a0..000000000000
--- a/arch/arm/mach-mmp/include/mach/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_MEMORY_H
-#define __ASM_MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-
-#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index f81ef1f9d46f..a60ab6d04ec5 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -93,7 +93,7 @@ static void __init halibut_map_io(void)
 }
 
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .fixup          = halibut_fixup,
         .map_io         = halibut_map_io,
         .init_irq       = halibut_init_irq,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 1df15aa3c66d..5a4882fc6f7a 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -74,7 +74,7 @@ static void __init mahimahi_map_io(void)
 extern struct sys_timer msm_timer;
 
 MACHINE_START(MAHIMAHI, "mahimahi")
-        .boot_params    = 0x20000100,
+        .atag_offset    = 0x100,
         .fixup          = mahimahi_fixup,
         .map_io         = mahimahi_map_io,
         .init_irq       = msm_init_irq,
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index 1a313e10c68a..6d84ee740df4 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -129,7 +129,7 @@ static void __init msm7x2x_map_io(void)
 }
 
 MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
-        .boot_params    = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = msm7x2x_map_io,
         .init_irq       = msm7x2x_init_irq,
         .init_machine   = msm7x2x_init,
@@ -137,7 +137,7 @@ MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
-        .boot_params    = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = msm7x2x_map_io,
         .init_irq       = msm7x2x_init_irq,
         .init_machine   = msm7x2x_init,
@@ -145,7 +145,7 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
 MACHINE_END
 
 MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
-        .boot_params    = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = msm7x2x_map_io,
         .init_irq       = msm7x2x_init_irq,
         .init_machine   = msm7x2x_init,
@@ -153,7 +153,7 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
-        .boot_params    = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = msm7x2x_map_io,
         .init_irq       = msm7x2x_init_irq,
         .init_machine   = msm7x2x_init,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 9043417ea52f..71de5062c71e 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -121,7 +121,7 @@ static void __init msm7x30_map_io(void)
 }
 
 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
-        .boot_params = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .fixup = msm7x30_fixup,
         .reserve = msm7x30_reserve,
         .map_io = msm7x30_map_io,
@@ -131,7 +131,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
-        .boot_params = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .fixup = msm7x30_fixup,
         .reserve = msm7x30_reserve,
         .map_io = msm7x30_map_io,
@@ -141,7 +141,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
 MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
-        .boot_params = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .fixup = msm7x30_fixup,
         .reserve = msm7x30_reserve,
         .map_io = msm7x30_map_io,
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 9221f54778be..106170fb1844 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -53,8 +53,6 @@ static void __init msm8x60_map_io(void)
 
 static void __init msm8x60_init_irq(void)
 {
-        unsigned int i;
-
         gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
                  (void *)MSM_QGIC_CPU_BASE);
 
@@ -66,15 +64,6 @@ static void __init msm8x60_init_irq(void)
          */
         if (!machine_is_msm8x60_sim())
                 writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
-        /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
-         * as they are configured as level, which does not play nice with
-         * handle_percpu_irq.
-         */
-        for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
-                if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
-                        irq_set_handler(i, handle_percpu_irq);
-        }
 }
 
 static void __init msm8x60_init(void)
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 24e9b89738ef..7e8909c978c3 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -192,7 +192,7 @@ static void __init qsd8x50_init(void)
 }
 
 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
-        .boot_params = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = qsd8x50_map_io,
         .init_irq = qsd8x50_init_irq,
         .init_machine = qsd8x50_init,
@@ -200,7 +200,7 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
 MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
-        .boot_params = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = qsd8x50_map_io,
         .init_irq = qsd8x50_init_irq,
         .init_machine = qsd8x50_init,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 11c1e75ebb1b..32b465763dbd 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -104,7 +104,7 @@ static void __init sapphire_map_io(void)
 
 MACHINE_START(SAPPHIRE, "sapphire")
 /* Maintainer: Brian Swetland <swetland@google.com> */
-        .boot_params    = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset    = 0x100,
         .fixup          = sapphire_fixup,
         .map_io         = sapphire_map_io,
         .init_irq       = sapphire_init_irq,
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 7acd2021ada9..6b9b227c87c5 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -93,7 +93,7 @@ static void __init trout_map_io(void)
 }
 
 MACHINE_START(TROUT, "HTC Dream")
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .fixup          = trout_fixup,
         .map_io         = trout_map_io,
         .init_irq       = trout_init_irq,
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 646b99ebc773..2dc73ccddb11 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
 #include <mach/msm_iomap.h>
 
 #if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldr     \rp, =MSM_DEBUG_UART_PHYS
         ldr     \rv, =MSM_DEBUG_UART_BASE
         .endm
@@ -37,7 +37,7 @@
         beq     1001b
         .endm
 #else
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         mov     \rv, #0xff000000
         orr     \rv, \rv, #0x00f00000
         .endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
index 12467157afb9..717076f3ca73 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -8,81 +8,10 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
 
         .macro  disable_fiq
         .endm
 
-        .macro  get_irqnr_preamble, base, tmp
-        ldr     \base, =gic_cpu_base_addr
-        ldr     \base, [\base]
-        .endm
-
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
-
-        /*
-         * The interrupt numbering scheme is defined in the
-         * interrupt controller spec.  To wit:
-         *
-         * Migrated the code from ARM MP port to be more consistent
-         * with interrupt processing , the following still holds true
-         * however, all interrupts are treated the same regardless of
-         * if they are local IPI or PPI
-         *
-         * Interrupts 0-15 are IPI
-         * 16-31 are PPI
-         *   (16-18 are the timers)
-         * 32-1020 are global
-         * 1021-1022 are reserved
-         * 1023 is "spurious" (no interrupt)
-         *
-         * A simple read from the controller will tell us the number of the
-         * highest priority enabled interrupt.  We then just need to check
-         * whether it is in the valid range for an IRQ (0-1020 inclusive).
-         *
-         * Base ARM code assumes that the local (private) peripheral interrupts
-         * are not valid, we treat them differently, in that the privates are
-         * handled like normal shared interrupts with the exception that only
-         * one processor can register the interrupt and the handler must be
-         * the same for all processors.
-         */
-
-        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-        ldr  \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
-                                                   9-0 =int # */
-
-        bic     \irqnr, \irqstat, #0x1c00       @mask src
-        cmp     \irqnr, #15
-        ldr             \tmp, =1021
-        cmpcc   \irqnr, \irqnr
-        cmpne   \irqnr, \tmp
-        cmpcs   \irqnr, \irqnr
-
-        .endm
-
-        /* We assume that irqstat (the raw value of the IRQ acknowledge
-         * register) is preserved from the macro above.
-         * If there is an IPI, we immediately signal end of interrupt on the
-         * controller, since this requires the original irqstat value which
-         * we won't easily be able to recreate later.
-         */
-        .macro test_for_ipi, irqnr, irqstat, base, tmp
-    bic \irqnr, \irqstat, #0x1c00
-    cmp \irqnr, #16
-    strcc   \irqstat, [\base, #GIC_CPU_EOI]
-    cmpcs   \irqnr, \irqnr
-        .endm
-
-        /* As above, this assumes that irqstat and base are preserved.. */
-
-        .macro test_for_ltirq, irqnr, irqstat, base, tmp
-    bic \irqnr, \irqstat, #0x1c00
-    mov     \tmp, #0
-    cmp \irqnr, #16
-    moveq   \tmp, #1
-    streq   \irqstat, [\base, #GIC_CPU_EOI]
-    cmp \tmp, #0
-        .endm
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
deleted file mode 100644
index 58d5e7eec431..000000000000
--- a/arch/arm/mach-msm/include/mach/memory.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/mach-msm/include/mach/memory.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* physical offset of RAM */
-#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
-#define PLAT_PHYS_OFFSET                UL(0x00000000)
-#elif defined(CONFIG_ARCH_QSD8X50)
-#define PLAT_PHYS_OFFSET                UL(0x20000000)
-#elif defined(CONFIG_ARCH_MSM7X30)
-#define PLAT_PHYS_OFFSET                UL(0x00000000)
-#elif defined(CONFIG_ARCH_MSM8X60)
-#define PLAT_PHYS_OFFSET                UL(0x40000000)
-#elif defined(CONFIG_ARCH_MSM8960)
-#define PLAT_PHYS_OFFSET                UL(0x40000000)
-#else
-#define PLAT_PHYS_OFFSET                UL(0x10000000)
-#endif
-
-#endif
-
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 63621f152c98..afeeca52fc66 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -71,12 +71,16 @@ enum timer_location {
 struct msm_clock {
         struct clock_event_device   clockevent;
         struct clocksource          clocksource;
-        struct irqaction            irq;
+        unsigned int                irq;
         void __iomem                *regbase;
         uint32_t                    freq;
         uint32_t                    shift;
         void __iomem                *global_counter;
         void __iomem                *local_counter;
+        union {
+                struct clock_event_device               *evt;
+                struct clock_event_device __percpu      **percpu_evt;
+        };              
 };
 
 enum {
@@ -87,13 +91,10 @@ enum {
 
 
 static struct msm_clock msm_clocks[];
-static struct clock_event_device *local_clock_event;
 
 static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
 {
-        struct clock_event_device *evt = dev_id;
-        if (smp_processor_id() != 0)
-                evt = local_clock_event;
+        struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
         if (evt->event_handler == NULL)
                 return IRQ_HANDLED;
         evt->event_handler(evt);
@@ -171,13 +172,7 @@ static struct msm_clock msm_clocks[] = {
                         .mask           = CLOCKSOURCE_MASK(32),
                         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
                 },
-                .irq = {
-                        .name    = "gp_timer",
-                        .flags   = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
-                        .handler = msm_timer_interrupt,
-                        .dev_id  = &msm_clocks[0].clockevent,
-                        .irq     = INT_GP_TIMER_EXP
-                },
+                .irq = INT_GP_TIMER_EXP,
                 .freq = GPT_HZ,
         },
         [MSM_CLOCK_DGT] = {
@@ -196,13 +191,7 @@ static struct msm_clock msm_clocks[] = {
                         .mask           = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
                         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
                 },
-                .irq = {
-                        .name    = "dg_timer",
-                        .flags   = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
-                        .handler = msm_timer_interrupt,
-                        .dev_id  = &msm_clocks[1].clockevent,
-                        .irq     = INT_DEBUG_TIMER_EXP
-                },
+                .irq = INT_DEBUG_TIMER_EXP,
                 .freq = DGT_HZ >> MSM_DGT_SHIFT,
                 .shift = MSM_DGT_SHIFT,
         }
@@ -261,10 +250,30 @@ static void __init msm_timer_init(void)
                         printk(KERN_ERR "msm_timer_init: clocksource_register "
                                "failed for %s\n", cs->name);
 
-                res = setup_irq(clock->irq.irq, &clock->irq);
+                ce->irq = clock->irq;
+                if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+                        clock->percpu_evt = alloc_percpu(struct clock_event_device *);
+                        if (!clock->percpu_evt) {
+                                pr_err("msm_timer_init: memory allocation "
+                                       "failed for %s\n", ce->name);
+                                continue;
+                        }
+
+                        *__this_cpu_ptr(clock->percpu_evt) = ce;
+                        res = request_percpu_irq(ce->irq, msm_timer_interrupt,
+                                                 ce->name, clock->percpu_evt);
+                        if (!res)
+                                enable_percpu_irq(ce->irq, 0);
+                } else {
+                        clock->evt = ce;
+                        res = request_irq(ce->irq, msm_timer_interrupt,
+                                          IRQF_TIMER | IRQF_NOBALANCING | IRQF_TRIGGER_RISING,
+                                          ce->name, &clock->evt);
+                }
+
                 if (res)
-                        printk(KERN_ERR "msm_timer_init: setup_irq "
-                               "failed for %s\n", cs->name);
+                        pr_err("msm_timer_init: request_irq failed for %s\n",
+                               ce->name);
 
                 clockevents_register_device(ce);
         }
@@ -273,6 +282,7 @@ static void __init msm_timer_init(void)
 #ifdef CONFIG_SMP
 int __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
+        static bool local_timer_inited;
         struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER];
 
         /* Use existing clock_event for cpu 0 */
@@ -281,12 +291,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
 
         writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
 
-        if (!local_clock_event) {
+        if (!local_timer_inited) {
                 writel(0, clock->regbase  + TIMER_ENABLE);
                 writel(0, clock->regbase + TIMER_CLEAR);
                 writel(~0, clock->regbase + TIMER_MATCH_VAL);
+                local_timer_inited = true;
         }
-        evt->irq = clock->irq.irq;
+        evt->irq = clock->irq;
         evt->name = "local_timer";
         evt->features = CLOCK_EVT_FEAT_ONESHOT;
         evt->rating = clock->clockevent.rating;
@@ -298,17 +309,17 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
                 clockevent_delta2ns(0xf0000000 >> clock->shift, evt);
         evt->min_delta_ns = clockevent_delta2ns(4, evt);
 
-        local_clock_event = evt;
-
-        gic_enable_ppi(clock->irq.irq);
+        *__this_cpu_ptr(clock->percpu_evt) = evt;
+        enable_percpu_irq(evt->irq, 0);
 
         clockevents_register_device(evt);
         return 0;
 }
 
-inline int local_timer_ack(void)
+void local_timer_stop(struct clock_event_device *evt)
 {
-        return 1;
+        evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+        disable_percpu_irq(evt->irq);
 }
 
 #endif
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 20f3f125ed2b..0e94268d6e6f 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -145,7 +145,7 @@ subsys_initcall(wxl_pci_init);
 
 MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
         /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = wxl_init,
         .map_io         = mv78xx0_map_io,
         .init_early     = mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index df5aebe5b0fa..50b85ae2da52 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -93,7 +93,7 @@ subsys_initcall(db78x00_pci_init);
 
 MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
         /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = db78x00_init,
         .map_io         = mv78xx0_map_io,
         .init_early     = mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index 04891428e48b..a7df02b049b7 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/mv78xx0.h>
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldr     \rp, =MV78XX0_REGS_PHYS_BASE
         ldr     \rv, =MV78XX0_REGS_VIRT_BASE
         orr     \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
deleted file mode 100644
index a648c51f2e42..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET                UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index d927f14c6810..e85222e53578 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -78,7 +78,7 @@ subsys_initcall(rd78x00_pci_init);
 
 MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
         /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = rd78x00_masa_init,
         .map_io         = mv78xx0_map_io,
         .init_early     = mv78xx0_init_early,
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 68934ea8725a..e01af948e043 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -293,7 +293,7 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
         /* Maintainer: Eric Bénard <eric@eukrea.com> */
-        .boot_params = MX51_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx51_map_io,
         .init_early = imx51_init_early,
         .init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index ff096d587299..b41fc274a425 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -331,7 +331,7 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
         /* Maintainer: Eric Bénard <eric@eukrea.com> */
-        .boot_params = MX51_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx51_map_io,
         .init_early = imx51_init_early,
         .init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 07a38154da21..a50174e69e2f 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -169,7 +169,7 @@ static struct sys_timer mx51_3ds_timer = {
 
 MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
         /* Maintainer: Freescale Semiconductor, Inc. */
-        .boot_params = MX51_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx51_map_io,
         .init_early = imx51_init_early,
         .init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 11b0ff67f89d..468926a48fe0 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -416,7 +416,7 @@ static struct sys_timer mx51_babbage_timer = {
 
 MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
         /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
-        .boot_params = MX51_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx51_map_io,
         .init_early = imx51_init_early,
         .init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 551daf85ff8c..c36880da03f0 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -280,7 +280,7 @@ static struct sys_timer mx51_efikamx_timer = {
 
 MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
         /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
-        .boot_params = MX51_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx51_map_io,
         .init_early = imx51_init_early,
         .init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 8a9bca22beb5..ba5436a9fb1a 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -266,7 +266,7 @@ static struct sys_timer mx51_efikasb_timer = {
 };
 
 MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
-        .boot_params = MX51_PHYS_OFFSET + 0x100,
+        .atag_offset = 0x100,
         .map_io = mx51_map_io,
         .init_early = imx51_init_early,
         .init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
index 79650a1ad78d..714570d83668 100644
--- a/arch/arm/mach-mxs/include/mach/debug-macro.S
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -30,7 +30,7 @@
 
 #define UART_VADDR      MXS_IO_ADDRESS(UART_PADDR)
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 ldr     \rp, =UART_PADDR        @ physical
                 ldr     \rv, =UART_VADDR        @ virtual
                 .endm
diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h
deleted file mode 100644
index b5420a5c2d4b..000000000000
--- a/arch/arm/mach-mxs/include/mach/memory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_MEMORY_H__
-#define __MACH_MXS_MEMORY_H__
-
-#define PHYS_OFFSET             UL(0x40000000)
-
-#endif /* __MACH_MXS_MEMORY_H__ */
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 56a915228180..247781e096e2 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x00000a00
                 orr     \rv, \rp, #io_p2v(0x00100000)   @ virtual
                 orr     \rp, \rp, #0x00100000           @ physical
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
deleted file mode 100644
index 59561496c36e..000000000000
--- a/arch/arm/mach-netx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  arch/arm/mach-netx/include/mach/memory.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
-
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index ca8b203a3c99..90903dd44cbc 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -200,7 +200,7 @@ static void __init nxdb500_init(void)
 }
 
 MACHINE_START(NXDB500, "Hilscher nxdb500")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .map_io         = netx_map_io,
         .init_irq       = netx_init_irq,
         .timer          = &netx_timer,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index d775cbe07278..c63384aba500 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -93,7 +93,7 @@ static void __init nxdkn_init(void)
 }
 
 MACHINE_START(NXDKN, "Hilscher nxdkn")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .map_io         = netx_map_io,
         .init_irq       = netx_init_irq,
         .timer          = &netx_timer,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index de369cd1dcbe..8f548ec83ad2 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -177,7 +177,7 @@ static void __init nxeb500hmi_init(void)
 }
 
 MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .map_io         = netx_map_io,
         .init_irq       = netx_init_irq,
         .timer          = &netx_timer,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 97d7186484ca..0cbb74c96ef7 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -277,7 +277,7 @@ static void __init nhk8815_platform_init(void)
 
 MACHINE_START(NOMADIK, "NHK8815")
         /* Maintainer: ST MicroElectronics */
-        .boot_params    = 0x100,
+        .atag_offset    = 0x100,
         .map_io         = cpu8815_map_io,
         .init_irq       = cpu8815_init_irq,
         .timer          = &nomadik_timer,
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e7151b4b8889..735417922ce2 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  *
 */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x00100000
                 add     \rp, \rp, #0x000fb000
                 add     \rv, \rp, #0xf0000000   @ virtual base
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
deleted file mode 100644
index d3325211ba6a..000000000000
--- a/arch/arm/mach-nomadik/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  mach-nomadik/include/mach/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h
deleted file mode 100644
index ef9864b002a6..000000000000
--- a/arch/arm/mach-nuc93x/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
index d70257042480..1f741b1c1604 100644
--- a/arch/arm/mach-nuc93x/mach-nuc932evb.c
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -35,7 +35,6 @@ static void __init nuc932evb_init(void)
 
 MACHINE_START(NUC932EVB, "NUC932EVB")
         /* Maintainer: Wan ZongShun */
-        .boot_params    = 0,
         .map_io         = nuc932evb_map_io,
         .init_irq       = nuc93x_init_irq,
         .init_machine   = nuc932evb_init,
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index d86e9af2822b..4ea60e2038ea 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -385,7 +385,7 @@ static void __init ams_delta_map_io(void)
 
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
         /* Maintainer: Jonathan McDowell <noodles@earth.li> */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = ams_delta_map_io,
         .reserve        = omap_reserve,
         .init_irq       = ams_delta_init_irq,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index dd814b33cdd5..31e089b6f03f 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -388,7 +388,7 @@ static void __init omap_fsample_map_io(void)
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 /* Maintainer: Brian Swetland <swetland@google.com> */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = omap_fsample_map_io,
         .reserve        = omap_reserve,
         .init_irq       = omap_fsample_init_irq,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 8f7d11581482..05c6e9d858f3 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -93,7 +93,7 @@ static void __init omap_generic_map_io(void)
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
         /* Maintainer: Tony Lindgren <tony@atomide.com> */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = omap_generic_map_io,
         .reserve        = omap_reserve,
         .init_irq       = omap_generic_init_irq,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 0796ad7e24b5..c2e279173d42 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -460,7 +460,7 @@ static void __init h2_map_io(void)
 
 MACHINE_START(OMAP_H2, "TI-H2")
         /* Maintainer: Imre Deak <imre.deak@nokia.com> */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = h2_map_io,
         .reserve        = omap_reserve,
         .init_irq       = h2_init_irq,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index fe1814c5e748..8f5b6af7ed59 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -448,7 +448,7 @@ static void __init h3_map_io(void)
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
         /* Maintainer: Texas Instruments, Inc. */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = h3_map_io,
         .reserve        = omap_reserve,
         .init_irq       = h3_init_irq,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 4af7bfa40e4a..fcd1a3c31896 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -610,7 +610,7 @@ static void __init htcherald_init_irq(void)
 MACHINE_START(HERALD, "HTC Herald")
         /* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
         /* Maintainer: wing-linux.sourceforge.net */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = htcherald_map_io,
         .reserve        = omap_reserve,
         .init_irq       = htcherald_init_irq,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index e603e5eb32a8..c2234caf8a7a 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -458,7 +458,7 @@ static void __init innovator_map_io(void)
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
         /* Maintainer: MontaVista Software, Inc. */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = innovator_map_io,
         .reserve        = omap_reserve,
         .init_irq       = innovator_init_irq,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 8420535fe51d..02789c5d3703 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -263,7 +263,7 @@ static void __init omap_nokia770_map_io(void)
 }
 
 MACHINE_START(NOKIA770, "Nokia 770")
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = omap_nokia770_map_io,
         .reserve        = omap_reserve,
         .init_irq       = omap_nokia770_init_irq,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index bf1ebe5b2442..e4dca1deebb4 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -582,7 +582,7 @@ static void __init osk_map_io(void)
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
         /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = osk_map_io,
         .reserve        = omap_reserve,
         .init_irq       = osk_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 45596b5acf09..50c4e398bcc8 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -274,7 +274,7 @@ static void __init omap_palmte_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = omap_palmte_map_io,
         .reserve        = omap_reserve,
         .init_irq       = omap_palmte_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index f942221f6e71..273771cb1b61 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -321,7 +321,7 @@ static void __init omap_palmtt_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = omap_palmtt_map_io,
         .reserve        = omap_reserve,
         .init_irq       = omap_palmtt_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 2b912d46ceec..de36ade38ef7 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -341,7 +341,7 @@ omap_palmz71_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = omap_palmz71_map_io,
         .reserve        = omap_reserve,
         .init_irq       = omap_palmz71_init_irq,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 7e2efe52cc35..04b1befaced6 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -349,7 +349,7 @@ static void __init omap_perseus2_map_io(void)
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
         /* Maintainer: Kevin Hilman <kjh@hilman.org> */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = omap_perseus2_map_io,
         .reserve        = omap_reserve,
         .init_irq       = omap_perseus2_init_irq,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 172a28f9a344..2bea941741d5 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -420,7 +420,7 @@ static void __init omap_sx1_map_io(void)
 }
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = omap_sx1_map_io,
         .reserve        = omap_reserve,
         .init_irq       = omap_sx1_init_irq,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 236b7ded0cf8..940faed82be2 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -301,7 +301,7 @@ static void __init voiceblue_init(void)
 
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
         /* Maintainer: Ladislav Michl <michl@2n.cz> */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .map_io         = voiceblue_map_io,
         .reserve        = omap_reserve,
         .init_irq       = voiceblue_init_irq,
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 62856044eb63..2b36a281dc84 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,13 +13,8 @@
 
 #include <linux/serial_reg.h>
 
-#include <asm/memory.h>
-
 #include <plat/serial.h>
 
-#define omap_uart_v2p(x)        ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x)        ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
                 .pushsection .data
 omap_uart_phys: .word   0x0
 omap_uart_virt: .word   0x0
@@ -31,26 +26,24 @@ omap_uart_virt:	.word	0x0
                  * the desired UART phys and virt addresses temporarily into
                  * the omap_uart_phys and omap_uart_virt above.
                  */
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
 
                 /* Use omap_uart_phys/virt if already configured */
-9:              mrc     p15, 0, \rp, c1, c0
-                tst     \rp, #1                 @ MMU enabled?
-                ldreq   \rp, =omap_uart_v2p(omap_uart_phys)     @ MMU disabled
-                ldrne   \rp, =omap_uart_phys    @ MMU enabled
-                add     \rv, \rp, #4            @ omap_uart_virt
-                ldr     \rp, [\rp, #0]
-                ldr     \rv, [\rv, #0]
+9:              adr     \rp, 99f                @ get effective addr of 99f
+                ldr     \rv, [\rp]              @ get absolute addr of 99f
+                sub     \rv, \rv, \rp           @ offset between the two
+                ldr     \rp, [\rp, #4]          @ abs addr of omap_uart_phys
+                sub     \tmp, \rp, \rv          @ make it effective
+                ldr     \rp, [\tmp, #0]         @ omap_uart_phys
+                ldr     \rv, [\tmp, #4]         @ omap_uart_virt
                 cmp     \rp, #0                 @ is port configured?
                 cmpne   \rv, #0
-                bne     99f                     @ already configured
+                bne     100f                    @ already configured
 
                 /* Check the debug UART configuration set in uncompress.h */
-                mrc     p15, 0, \rp, c1, c0
-                tst     \rp, #1                 @ MMU enabled?
-                ldreq   \rp, =OMAP_UART_INFO    @ MMU not enabled
-                ldrne   \rp, =omap_uart_p2v(OMAP_UART_INFO)     @ MMU enabled
-                ldr     \rp, [\rp, #0]
+                and     \rp, pc, #0xff000000
+                ldr     \rv, =OMAP_UART_INFO_OFS
+                ldr     \rp, [\rp, \rv]
 
                 /* Select the UART to use based on the UART1 scratchpad value */
 10:             cmp     \rp, #0                 @ no port configured?
@@ -74,17 +67,18 @@ omap_uart_virt:	.word	0x0
 
                 /* Store both phys and virt address for the uart */
 98:             add     \rp, \rp, #0xff000000   @ phys base
-                mrc     p15, 0, \rv, c1, c0
-                tst     \rv, #1                 @ MMU enabled?
-                ldreq   \rv, =omap_uart_v2p(omap_uart_phys)     @ MMU disabled
-                ldrne   \rv, =omap_uart_phys    @ MMU enabled
-                str     \rp, [\rv, #0]
+                str     \rp, [\tmp, #0]         @ omap_uart_phys
                 sub     \rp, \rp, #0xff000000   @ phys base
                 add     \rp, \rp, #0xfe000000   @ virt base
-                add     \rv, \rv, #4            @ omap_uart_lsr
-                str     \rp, [\rv, #0]
+                str     \rp, [\tmp, #4]         @ omap_uart_virt
                 b       9b
-99:
+
+                .align
+99:             .word   .
+                .word   omap_uart_phys
+                .ltorg
+
+100:
                 .endm
 
                 .macro  senduart,rd,rx
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index e9b600c113ef..c6337645ba8a 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -2,4 +2,55 @@
  * arch/arm/mach-omap1/include/mach/memory.h
  */
 
-#include <plat/memory.h>
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PLAT_PHYS_OFFSET                UL(0x10000000)
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET      UL(0x30000000)
+
+#define virt_to_lbus(x)         ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)         ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)     (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
+
+#define __arch_pfn_to_dma(dev, pfn)     \
+        ({ dma_addr_t __dma = __pfn_to_phys(pfn); \
+           if (is_lbus_device(dev)) \
+                __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+           __dma; })
+
+#define __arch_dma_to_pfn(dev, addr)    \
+        ({ dma_addr_t __dma = addr;                             \
+           if (is_lbus_device(dev))                             \
+                __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;      \
+           __phys_to_pfn(__dma);                                \
+        })
+
+#define __arch_dma_to_virt(dev, addr)   ({ (void *) (is_lbus_device(dev) ? \
+                                                lbus_to_virt(addr) : \
+                                                __phys_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr)   ({ unsigned long __addr = (unsigned long)(addr); \
+                                           (dma_addr_t) (is_lbus_device(dev) ? \
+                                                virt_to_lbus(__addr) : \
+                                                __virt_to_phys(__addr)); })
+
+#endif  /* CONFIG_ARCH_OMAP15XX */
+
+#endif
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 870886a29594..1cfa1b6bb62b 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -121,6 +121,7 @@ void __init omap1_map_common_io(void)
 #endif
 
         omap_sram_init();
+        omap_init_consistent_dma_size();
 }
 
 /*
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index f79b7d2a8ed4..87f43ade4405 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -257,7 +257,7 @@ static void __init omap_2430sdp_map_io(void)
 
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
         /* Maintainer: Syed Khasim - Texas Instruments Inc */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap_2430sdp_map_io,
         .init_early     = omap_2430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd600cfb7f80..2430531b2239 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -729,7 +729,7 @@ static void __init omap_3430sdp_init(void)
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
         /* Maintainer: Syed Khasim - Texas Instruments Inc */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap_3430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index e4f37b57a0c4..8b5b5aa751ed 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -215,7 +215,7 @@ static void __init omap_sdp_init(void)
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap_sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index c7cef44c75d4..be931105d681 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -838,7 +838,7 @@ static void __init omap_4430sdp_map_io(void)
 
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
         /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap_4430sdp_map_io,
         .init_early     = omap_4430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 933e9353cb37..db110fdb8b2c 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -98,7 +98,7 @@ static void __init am3517_crane_init(void)
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = am3517_crane_init_early,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f3006c304150..1325085e453d 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -490,7 +490,7 @@ static void __init am3517_evm_init(void)
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = am3517_evm_init_early,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 70211703ff9f..67800e647d7a 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -350,7 +350,7 @@ static void __init omap_apollon_map_io(void)
 
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
         /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap_apollon_map_io,
         .init_early     = omap_apollon_init_early,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 3af8aab435b5..38179c175503 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -634,7 +634,7 @@ static void __init cm_t3730_init(void)
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = cm_t35_init_early,
@@ -644,7 +644,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 MACHINE_END
 
 MACHINE_START(CM_T3730, "Compulab CM-T3730")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = cm_t35_init_early,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 05c72f4c1b57..aed9c29f9fae 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -299,7 +299,7 @@ static void __init cm_t3517_init(void)
 }
 
 MACHINE_START(CM_T3517, "Compulab CM-T3517")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = cm_t3517_init_early,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index b6002ec31c6a..99a42432ac93 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -667,7 +667,7 @@ static void __init devkit8000_init(void)
 }
 
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = devkit8000_init_early,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index bb4af05c7f0a..4431ad364565 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -65,7 +65,7 @@ static void __init omap_generic_map_io(void)
 /* XXX This machine entry name should be updated */
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
         /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap_generic_map_io,
         .init_early     = omap_generic_init_early,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 95319e761802..82421a4cfa92 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -381,7 +381,7 @@ static void __init omap_h4_map_io(void)
 
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
         /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap_h4_map_io,
         .init_early     = omap_h4_init_early,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 35be778caf1b..7040352b16b4 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -672,7 +672,7 @@ static void __init igep_init(void)
 }
 
 MACHINE_START(IGEP0020, "IGEP v2 board")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = igep_init_early,
@@ -682,7 +682,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 MACHINE_END
 
 MACHINE_START(IGEP0030, "IGEP OMAP3 module")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = igep_init_early,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ddff45c1688c..abe8c7e496a2 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -332,7 +332,7 @@ static void __init omap_ldp_init(void)
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap_ldp_init_early,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e11f0c5d608a..6ce748154f24 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -695,7 +695,7 @@ static void __init n8x0_init_machine(void)
 }
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = n8x0_map_io,
         .init_early     = n8x0_init_early,
@@ -705,7 +705,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = n8x0_map_io,
         .init_early     = n8x0_init_early,
@@ -715,7 +715,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = n8x0_map_io,
         .init_early     = n8x0_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3ae16b4e3f52..1fde8a0474bb 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -557,7 +557,7 @@ static void __init omap3_beagle_init(void)
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
         /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap3_beagle_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c452b3f3331a..15c69a0c1ce5 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -681,7 +681,7 @@ static void __init omap3_evm_init(void)
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
         /* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap3_evm_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 703aeb5b8fd4..01354a214caf 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -209,7 +209,7 @@ static void __init omap3logic_init(void)
 }
 
 MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .map_io         = omap3_map_io,
         .init_early     = omap3logic_init_early,
         .init_irq       = omap3_init_irq,
@@ -218,7 +218,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 MACHINE_END
 
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .map_io         = omap3_map_io,
         .init_early     = omap3logic_init_early,
         .init_irq       = omap3_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 080d7bd6795e..ace56938dd3b 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -606,7 +606,7 @@ static void __init omap3pandora_init(void)
 }
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap3pandora_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8e104980ea26..ba13e1d5d0ab 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -494,7 +494,7 @@ static void __init omap3_stalker_init(void)
 
 MACHINE_START(SBC3530, "OMAP3 STALKER")
         /* Maintainer: Jason Lam -lzg@ema-tech.com */
-        .boot_params            = 0x80000100,
+        .atag_offset            = 0x100,
         .map_io                 = omap3_map_io,
         .init_early             = omap3_stalker_init_early,
         .init_irq               = omap3_stalker_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 852ea0464057..49e4bd207cb6 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -404,7 +404,7 @@ static void __init omap3_touchbook_init(void)
 
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
         /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap3_touchbook_init_early,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa96057666..683bede73d54 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -583,7 +583,7 @@ static void __init omap4_panda_map_io(void)
 
 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
         /* Maintainer: David Anders - Texas Instruments Inc */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap4_panda_map_io,
         .init_early     = omap4_panda_init_early,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f949a9954d76..e592fb134c4e 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -561,7 +561,7 @@ static void __init overo_init(void)
 }
 
 MACHINE_START(OVERO, "Gumstix Overo")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = overo_init_early,
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 7dfed24ee12e..9a8ce239ba9e 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -153,7 +153,7 @@ static void __init rm680_map_io(void)
 }
 
 MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = rm680_map_io,
         .init_early     = rm680_init_early,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 5ea142f9bc97..a6c473bbb3d6 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -156,7 +156,7 @@ static void __init rx51_reserve(void)
 
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
         /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = rx51_reserve,
         .map_io         = rx51_map_io,
         .init_early     = rx51_init_early,
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index a85d5b0b11da..e41958acb6b6 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -48,7 +48,7 @@ static void __init ti8168_evm_map_io(void)
 
 MACHINE_START(TI8168EVM, "ti8168evm")
         /* Maintainer: Texas Instruments */
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .map_io         = ti8168_evm_map_io,
         .init_early     = ti8168_init_early,
         .init_irq       = ti816x_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 8a98c3c303fc..72f1db4863e5 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -133,7 +133,7 @@ static void __init omap_zoom_init(void)
 }
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap_zoom_init_early,
@@ -143,7 +143,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 MACHINE_END
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-        .boot_params    = 0x80000100,
+        .atag_offset    = 0x100,
         .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap_zoom_init_early,
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 48adfe9fe4f3..13f98e59cfef 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,15 +13,10 @@
 
 #include <linux/serial_reg.h>
 
-#include <asm/memory.h>
-
 #include <plat/serial.h>
 
 #define UART_OFFSET(addr)       ((addr) & 0x00ffffff)
 
-#define omap_uart_v2p(x)        ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x)        ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
                 .pushsection .data
 omap_uart_phys: .word   0
 omap_uart_virt: .word   0
@@ -34,26 +29,25 @@ omap_uart_lsr:	.word	0
                  * the desired UART phys and virt addresses temporarily into
                  * the omap_uart_phys and omap_uart_virt above.
                  */
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
 
                 /* Use omap_uart_phys/virt if already configured */
-10:             mrc     p15, 0, \rp, c1, c0
-                tst     \rp, #1                 @ MMU enabled?
-                ldreq   \rp, =omap_uart_v2p(omap_uart_phys)     @ MMU disabled
-                ldrne   \rp, =omap_uart_phys    @ MMU enabled
-                add     \rv, \rp, #4            @ omap_uart_virt
-                ldr     \rp, [\rp, #0]
-                ldr     \rv, [\rv, #0]
+10:             adr     \rp, 99f                @ get effective addr of 99f
+                ldr     \rv, [\rp]              @ get absolute addr of 99f
+                sub     \rv, \rv, \rp           @ offset between the two
+                ldr     \rp, [\rp, #4]          @ abs addr of omap_uart_phys
+                sub     \tmp, \rp, \rv          @ make it effective
+                ldr     \rp, [\tmp, #0]         @ omap_uart_phys
+                ldr     \rv, [\tmp, #4]         @ omap_uart_virt
                 cmp     \rp, #0                 @ is port configured?
                 cmpne   \rv, #0
-                bne     99f                     @ already configured
+                bne     100f                    @ already configured
 
                 /* Check the debug UART configuration set in uncompress.h */
-                mrc     p15, 0, \rp, c1, c0
-                tst     \rp, #1                 @ MMU enabled?
-                ldreq   \rp, =OMAP_UART_INFO    @ MMU not enabled
-                ldrne   \rp, =omap_uart_p2v(OMAP_UART_INFO)     @ MMU enabled
-                ldr     \rp, [\rp, #0]
+                mov     \rp, pc
+                ldr     \rv, =OMAP_UART_INFO_OFS
+                and     \rp, \rp, #0xff000000
+                ldr     \rp, [\rp, \rv]
 
                 /* Select the UART to use based on the UART1 scratchpad value */
                 cmp     \rp, #0                 @ no port configured?
@@ -106,50 +100,47 @@ omap_uart_lsr:	.word	0
                 b       98f
 83:             mov     \rp, #UART_OFFSET(TI816X_UART3_BASE)
                 b       98f
+
 95:             ldr     \rp, =ZOOM_UART_BASE
-                mrc     p15, 0, \rv, c1, c0
-                tst     \rv, #1                 @ MMU enabled?
-                ldreq   \rv, =omap_uart_v2p(omap_uart_phys)     @ MMU disabled
-                ldrne   \rv, =omap_uart_phys    @ MMU enabled
-                str     \rp, [\rv, #0]
+                str     \rp, [\tmp, #0]         @ omap_uart_phys
                 ldr     \rp, =ZOOM_UART_VIRT
-                add     \rv, \rv, #4            @ omap_uart_virt
-                str     \rp, [\rv, #0]
+                str     \rp, [\tmp, #4]         @ omap_uart_virt
                 mov     \rp, #(UART_LSR << ZOOM_PORT_SHIFT)
-                add     \rv, \rv, #4            @ omap_uart_lsr
-                str     \rp, [\rv, #0]
+                str     \rp, [\tmp, #8]         @ omap_uart_lsr
                 b       10b
 
                 /* Store both phys and virt address for the uart */
 98:             add     \rp, \rp, #0x48000000   @ phys base
-                mrc     p15, 0, \rv, c1, c0
-                tst     \rv, #1                 @ MMU enabled?
-                ldreq   \rv, =omap_uart_v2p(omap_uart_phys)     @ MMU disabled
-                ldrne   \rv, =omap_uart_phys    @ MMU enabled
-                str     \rp, [\rv, #0]
+                str     \rp, [\tmp, #0]         @ omap_uart_phys
                 sub     \rp, \rp, #0x48000000   @ phys base
                 add     \rp, \rp, #0xfa000000   @ virt base
-                add     \rv, \rv, #4            @ omap_uart_virt
-                str     \rp, [\rv, #0]
+                str     \rp, [\tmp, #4]         @ omap_uart_virt
                 mov     \rp, #(UART_LSR << OMAP_PORT_SHIFT)
-                add     \rv, \rv, #4            @ omap_uart_lsr
-                str     \rp, [\rv, #0]
+                str     \rp, [\tmp, #8]         @ omap_uart_lsr
 
                 b       10b
-99:
+
+                .align
+99:             .word   .
+                .word   omap_uart_phys
+                .ltorg
+
+100:            /* Pass the UART_LSR reg address */
+                ldr     \tmp, [\tmp, #8]        @ omap_uart_lsr
+                add     \rp, \rp, \tmp
+                add     \rv, \rv, \tmp
                 .endm
 
                 .macro  senduart,rd,rx
-                strb    \rd, [\rx]
+                orr     \rd, \rd, \rx, lsl #24  @ preserve LSR reg offset
+                bic     \rx, \rx, #0xff         @ get base (THR) reg address
+                strb    \rd, [\rx]              @ send lower byte of rd
+                orr     \rx, \rx, \rd, lsr #24  @ restore original rx (LSR)
+                bic     \rd, \rd, #(0xff << 24) @ restore original rd
                 .endm
 
                 .macro  busyuart,rd,rx
-1001:           mrc     p15, 0, \rd, c1, c0
-                tst     \rd, #1                 @ MMU enabled?
-                ldreq   \rd, =omap_uart_v2p(omap_uart_lsr)      @ MMU disabled
-                ldrne   \rd, =omap_uart_lsr     @ MMU enabled
-                ldr     \rd, [\rd, #0]
-                ldrb    \rd, [\rx, \rd]
+1001:           ldrb    \rd, [\rx]              @ rx contains UART_LSR address
                 and     \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
                 teq     \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
                 bne     1001b
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index ceb8b7e593d7..feb90a10945a 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -78,7 +78,7 @@
 4401:           ldr     \irqstat, [\base, #GIC_CPU_INTACK]
                 ldr     \tmp, =1021
                 bic     \irqnr, \irqstat, #0x1c00
-                cmp     \irqnr, #29
+                cmp     \irqnr, #15
                 cmpcc   \irqnr, \irqnr
                 cmpne   \irqnr, \tmp
                 cmpcs   \irqnr, \irqnr
@@ -101,18 +101,6 @@
                 it      cs
                 cmpcs   \irqnr, \irqnr
                 .endm
-
-                /* As above, this assumes that irqstat and base are preserved */
-
-                .macro test_for_ltirq, irqnr, irqstat, base, tmp
-                bic     \irqnr, \irqstat, #0x1c00
-                mov     \tmp, #0
-                cmp     \irqnr, #29
-                itt     eq
-                moveq   \tmp, #1
-                streq   \irqstat, [\base, #GIC_CPU_EOI]
-                cmp     \tmp, #0
-                .endm
 #endif  /* CONFIG_SMP */
 
 #else   /* MULTI_OMAP2 */
diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h
deleted file mode 100644
index ca6d32a917dd..000000000000
--- a/arch/arm/mach-omap2/include/mach/memory.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/memory.h
- */
-
-#include <plat/memory.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2ce1ce6fb4db..d6d01cb7f28a 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -16,7 +16,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -250,6 +249,7 @@ static void __init _omap2_map_common_io(void)
 
         omap2_check_revision();
         omap_sram_init();
+        omap_init_consistent_dma_size();
 }
 
 #ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 19cf5bf99f1b..8c8300951f46 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -336,7 +336,7 @@ static void __init d2net_init(void)
 
 #ifdef CONFIG_MACH_D2NET
 MACHINE_START(D2NET, "LaCie d2 Network")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = d2net_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
@@ -348,7 +348,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_BIGDISK
 MACHINE_START(BIGDISK, "LaCie Big Disk Network")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = d2net_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 6d771cbf06a4..4b79a80d5e1f 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -358,7 +358,7 @@ static void __init db88f5281_init(void)
 
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
         /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = db88f5281_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 6fb4908e998b..343f60e9639f 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -729,7 +729,7 @@ static void __init dns323_init(void)
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(DNS323, "D-Link DNS-323")
         /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = dns323_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index b67cff0d4cfe..70a4e9265f06 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -251,7 +251,7 @@ static void __init edmini_v2_init(void)
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
         /* Maintainer: Christopher Moore <moore@free.fr> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = edmini_v2_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 5e3bf5b68aec..f340ed8f8dd0 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
 
 #include <mach/orion5x.h>
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldr     \rp, =ORION5X_REGS_PHYS_BASE
         ldr     \rv, =ORION5X_REGS_VIRT_BASE
         orr     \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
deleted file mode 100644
index 6769917882fe..000000000000
--- a/arch/arm/mach-orion5x/include/mach/memory.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/memory.h
- *
- * Marvell Orion memory definitions
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index f88f54bb7562..d3cd3f63258a 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -379,7 +379,7 @@ static void __init kurobox_pro_init(void)
 #ifdef CONFIG_MACH_KUROBOX_PRO
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
         /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = kurobox_pro_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
@@ -392,7 +392,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_LINKSTATION_PRO
 MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
         /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = kurobox_pro_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 5065803ca82a..9503fff404e3 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -318,7 +318,7 @@ static void __init lschl_init(void)
 
 MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
         /* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = lschl_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 8503d0a42d41..ed6d772f4a24 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -265,7 +265,7 @@ static void __init ls_hgl_init(void)
 
 MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
         /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = ls_hgl_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 9c82723c05c0..743f7f1db181 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -267,7 +267,7 @@ static void __init lsmini_init(void)
 #ifdef CONFIG_MACH_LINKSTATION_MINI
 MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
         /* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = lsmini_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index ef3bb8e9a4c2..6020e26b1c71 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -261,7 +261,7 @@ static void __init mss2_init(void)
 
 MACHINE_START(MSS2, "Maxtor Shared Storage II")
         /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = mss2_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 525eb1286859..201ae3676289 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -228,7 +228,7 @@ static void __init mv2120_init(void)
 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(MV2120, "HP Media Vault mv2120")
         /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = mv2120_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index e43b39cc7fe9..6197c79a2ecb 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -419,7 +419,7 @@ static void __init net2big_init(void)
 
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(NET2BIG, "LaCie 2Big Network")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = net2big_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 50aae6f571b8..ebd6767d8e88 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -168,7 +168,7 @@ subsys_initcall(rd88f5181l_fxo_pci_init);
 
 MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
         /* Maintainer: Nicolas Pitre <nico@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = rd88f5181l_fxo_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 35f106ac593a..05db2d336b08 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -180,7 +180,7 @@ subsys_initcall(rd88f5181l_ge_pci_init);
 
 MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
         /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = rd88f5181l_ge_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 9bb2b8bafbfd..e47fa0578ae3 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -305,7 +305,7 @@ static void __init rd88f5182_init(void)
 
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
         /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = rd88f5182_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 1d00df9ad464..64317251ec00 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -121,7 +121,7 @@ subsys_initcall(rd88f6183ap_ge_pci_init);
 
 MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
         /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = rd88f6183ap_ge_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index c9dd31d34866..29f1526f7b70 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -357,7 +357,7 @@ static void __init tsp2_init(void)
 
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
         /* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = tsp2_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 764307b8abfc..31e51f9b4b64 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -322,7 +322,7 @@ static void __init qnap_ts209_init(void)
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
         /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = qnap_ts209_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 0572dd1c8aaa..0fbcc14e09d7 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -311,7 +311,7 @@ static void __init qnap_ts409_init(void)
 
 MACHINE_START(TS409, "QNAP TS-409")
         /* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = qnap_ts409_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 6b7b54116f30..6c75cd35c4c8 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -621,7 +621,7 @@ static void __init ts78xx_init(void)
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
         /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = ts78xx_init,
         .map_io         = ts78xx_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index cdad50bd4891..b8be7d8d0cf4 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -172,7 +172,7 @@ subsys_initcall(wnr854t_pci_init);
 
 MACHINE_START(WNR854T, "Netgear WNR854T")
         /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = wnr854t_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 8f10ffd77ec3..faf81a039360 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -260,7 +260,7 @@ subsys_initcall(wrt350n_v2_pci_init);
 
 MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
         /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_machine   = wrt350n_v2_init,
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 63399755f199..cdb95e726f5c 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -264,7 +264,7 @@ extern struct sys_timer pnx4008_timer;
 
 MACHINE_START(PNX4008, "Philips PNX4008")
         /* Maintainer: MontaVista Software Inc. */
-        .boot_params            = 0x80000100,
+        .atag_offset            = 0x100,
         .map_io                 = pnx4008_map_io,
         .init_irq               = pnx4008_init_irq,
         .init_machine           = pnx4008_init,
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 931afebaf064..469d60d97f5c 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x00090000
                 add     \rv, \rp, #0xf4000000   @ virtual
                 add     \rp, \rp, #0x40000000   @ physical
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
deleted file mode 100644
index 1275db61cee5..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/memory.h
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET        UL(0x80000000)
-
-#endif
diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S
index bf75106333ff..cd97492bb075 100644
--- a/arch/arm/mach-prima2/include/mach/debug-macro.S
+++ b/arch/arm/mach-prima2/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
 #include <mach/hardware.h>
 #include <mach/uart.h>
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldr     \rp, =SIRFSOC_UART1_PA_BASE             @ physical
         ldr     \rv, =SIRFSOC_UART1_VA_BASE             @ virtual
         .endm
diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h
deleted file mode 100644
index 368cd5a0601a..000000000000
--- a/arch/arm/mach-prima2/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/memory.h
- *
- * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-
-/*
- * Restrict DMA-able region to workaround silicon limitation.
- * The limitation restricts buffers available for DMA to SD/MMC
- * hardware to be below 256MB
- */
-#define ARM_DMA_ZONE_SIZE       (SZ_256M)
-
-#endif
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index 9cda2057bcfb..66c6387e5a04 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -13,7 +13,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <mach/memory.h>
 
 #define L2X0_ADDR_FILTERING_START       0xC00
 #define L2X0_ADDR_FILTERING_END         0xC04
@@ -41,9 +40,9 @@ static int __init sirfsoc_of_l2x_init(void)
                 /*
                  * set the physical memory windows L2 cache will cover
                  */
-                writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024,
+                writel_relaxed(PHYS_OFFSET + 1024 * 1024 * 1024,
                         sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END);
-                writel_relaxed(PLAT_PHYS_OFFSET | 0x1,
+                writel_relaxed(PHYS_OFFSET | 0x1,
                         sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START);
 
                 writel_relaxed(0,
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index f57124bdd143..ee33c3d458f5 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -31,11 +31,12 @@ static const char *prima2cb_dt_match[] __initdata = {
 
 MACHINE_START(PRIMA2_EVB, "prima2cb")
         /* Maintainer: Barry Song <baohua.song@csr.com> */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .init_early     = sirfsoc_of_clk_init,
         .map_io         = sirfsoc_map_lluart,
         .init_irq       = sirfsoc_of_irq_init,
         .timer          = &sirfsoc_timer,
+        .dma_zone_size  = SZ_256M,
         .init_machine   = sirfsoc_mach_init,
         .dt_compat      = prima2cb_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index ef3e8b1e06c1..7765d677adbb 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -828,5 +828,5 @@ MACHINE_START(BALLOON3, "Balloon3")
         .handle_irq     = pxa27x_handle_irq,
         .timer          = &pxa_timer,
         .init_machine   = balloon3_init,
-        .boot_params    = PLAT_PHYS_OFFSET + 0x100,
+        .atag_offset    = 0x100,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 648b0ab2bf77..4efc16d39c79 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -148,7 +148,7 @@ static void __init capc7117_init(void)
 
 MACHINE_START(CAPC7117,
               "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
-        .boot_params = 0xa0000100,
+        .atag_offset = 0x100,
         .map_io = pxa3xx_map_io,
         .init_irq = pxa3xx_init_irq,
         .handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 13cf518bbbf8..349896c53abd 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -513,7 +513,7 @@ static void __init cmx2xx_map_io(void)
 #endif
 
 MACHINE_START(ARMCORE, "Compulab CM-X2XX")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = cmx2xx_map_io,
         .nr_irqs        = CMX2XX_NR_IRQS,
         .init_irq       = cmx2xx_init_irq,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index d940e8a72270..d2da301619f0 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -852,7 +852,7 @@ static void __init cm_x300_fixup(struct tag *tags, char **cmdline,
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa3xx_map_io,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 870920934ecf..7db66465716f 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -306,7 +306,7 @@ static void __init colibri_pxa270_income_init(void)
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-        .boot_params    = COLIBRI_SDRAM_BASE + 0x100,
+        .atag_offset    = 0x100,
         .init_machine   = colibri_pxa270_init,
         .map_io         = pxa27x_map_io,
         .init_irq       = pxa27x_init_irq,
@@ -315,7 +315,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 MACHINE_END
 
 MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .init_machine   = colibri_pxa270_income_init,
         .map_io         = pxa27x_map_io,
         .init_irq       = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 60a6781e7a8e..c825e8bf2db1 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -183,7 +183,7 @@ void __init colibri_pxa300_init(void)
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-        .boot_params    = COLIBRI_SDRAM_BASE + 0x100,
+        .atag_offset    = 0x100,
         .init_machine   = colibri_pxa300_init,
         .map_io         = pxa3xx_map_io,
         .init_irq       = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d2c6631915d4..692e1ffc5586 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -253,7 +253,7 @@ void __init colibri_pxa320_init(void)
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-        .boot_params    = COLIBRI_SDRAM_BASE + 0x100,
+        .atag_offset    = 0x100,
         .init_machine   = colibri_pxa320_init,
         .map_io         = pxa3xx_map_io,
         .init_irq       = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index fe812eafb1f1..5e2cf39e9e4c 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -272,7 +272,7 @@ static void __init csb726_init(void)
 }
 
 MACHINE_START(CSB726, "Cogent CSB726")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .init_irq       = pxa27x_init_irq,
         .handle_irq       = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 2e37ea52b372..94acc0b01dd6 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1299,7 +1299,7 @@ static void __init em_x270_init(void)
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
@@ -1308,7 +1308,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
 MACHINE_END
 
 MACHINE_START(EXEDA, "Compulab eXeda")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index e4a1f4dc89ff..8e697dd8accd 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -188,7 +188,7 @@ static void __init e330_init(void)
 
 MACHINE_START(E330, "Toshiba e330")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa25x_map_io,
         .nr_irqs        = ESERIES_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
@@ -238,7 +238,7 @@ static void __init e350_init(void)
 
 MACHINE_START(E350, "Toshiba e350")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa25x_map_io,
         .nr_irqs        = ESERIES_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
@@ -361,7 +361,7 @@ static void __init e400_init(void)
 
 MACHINE_START(E400, "Toshiba e400")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa25x_map_io,
         .nr_irqs        = ESERIES_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
@@ -550,7 +550,7 @@ static void __init e740_init(void)
 
 MACHINE_START(E740, "Toshiba e740")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa25x_map_io,
         .nr_irqs        = ESERIES_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
@@ -742,7 +742,7 @@ static void __init e750_init(void)
 
 MACHINE_START(E750, "Toshiba e750")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa25x_map_io,
         .nr_irqs        = ESERIES_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
@@ -947,7 +947,7 @@ static void __init e800_init(void)
 
 MACHINE_START(E800, "Toshiba e800")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa25x_map_io,
         .nr_irqs        = ESERIES_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index b73eadb9f5dc..8308eee5a924 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -797,7 +797,7 @@ static void __init a780_init(void)
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
@@ -863,7 +863,7 @@ static void __init e680_init(void)
 }
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
@@ -929,7 +929,7 @@ static void __init a1200_init(void)
 }
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
@@ -1120,7 +1120,7 @@ static void __init a910_init(void)
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
@@ -1186,7 +1186,7 @@ static void __init e6_init(void)
 }
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
@@ -1226,7 +1226,7 @@ static void __init e2_init(void)
 }
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index deaa111c91f9..9c8208ca0415 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -233,7 +233,7 @@ static void __init gumstix_init(void)
 }
 
 MACHINE_START(GUMSTIX, "Gumstix")
-        .boot_params    = 0xa0000100, /* match u-boot bi_boot_params */
+        .atag_offset    = 0x100, /* match u-boot bi_boot_params */
         .map_io         = pxa25x_map_io,
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 0a235128914d..4b5e110640b1 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -203,7 +203,7 @@ static void __init h5000_init(void)
 }
 
 MACHINE_START(H5400, "HP iPAQ H5000")
-        .boot_params = 0xa0000100,
+        .atag_offset = 0x100,
         .map_io = pxa25x_map_io,
         .init_irq = pxa25x_init_irq,
         .handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index a997d0ab2872..f2c324570844 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -158,7 +158,7 @@ static void __init himalaya_init(void)
 
 
 MACHINE_START(HIMALAYA, "HTC Himalaya")
-        .boot_params = 0xa0000100,
+        .atag_offset = 0x100,
         .map_io = pxa25x_map_io,
         .init_irq = pxa25x_init_irq,
         .handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index c748a473a2ff..6f6368ece9bd 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -838,7 +838,7 @@ static void __init hx4700_init(void)
 }
 
 MACHINE_START(H4700, "HP iPAQ HX4700")
-        .boot_params  = 0xa0000100,
+        .atag_offset  = 0x100,
         .map_io       = pxa27x_map_io,
         .nr_irqs      = HX4700_NR_IRQS,
         .init_irq     = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index d427429f1f34..f78d5db758da 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -191,7 +191,7 @@ static void __init icontrol_init(void)
 }
 
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa3xx_map_io,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 7d5c75125d65..70b112e8ef68 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x00100000
                 orr     \rv, \rp, #io_p2v(0x40000000)   @ virtual
                 orr     \rp, \rp, #0x40000000           @ physical
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
deleted file mode 100644
index d05a59727d66..000000000000
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/memory.h
- *
- * Author:      Nicolas Pitre
- * Copyright:   (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET        UL(0xa0000000)
-
-#endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 8f97e15e86e5..0037e57e0cec 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -437,7 +437,7 @@ static void __init littleton_init(void)
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa3xx_map_io,
         .nr_irqs        = LITTLETON_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index a3acd968b44d..64540d908958 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -498,7 +498,7 @@ static void __init lpd270_map_io(void)
 
 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
         /* Maintainer: Peter Barada */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = lpd270_map_io,
         .nr_irqs        = LPD270_NR_IRQS,
         .init_irq       = lpd270_init_irq,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5fe5bcd7c0a1..4b796c37af3e 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -753,7 +753,7 @@ static void __init magician_init(void)
 
 
 MACHINE_START(MAGICIAN, "HTC Magician")
-        .boot_params = 0xa0000100,
+        .atag_offset = 0x100,
         .map_io = pxa27x_map_io,
         .nr_irqs = MAGICIAN_NR_IRQS,
         .init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 6bc784bb3696..0567d3965fda 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -615,7 +615,7 @@ static void __init mainstone_map_io(void)
 
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
         /* Maintainer: MontaVista Software Inc. */
-        .boot_params    = 0xa0000100,   /* BLOB boot parameter setting */
+        .atag_offset    = 0x100,        /* BLOB boot parameter setting */
         .map_io         = mainstone_map_io,
         .nr_irqs        = MAINSTONE_NR_IRQS,
         .init_irq       = mainstone_init_irq,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 64810f908e5b..b938fc2c316a 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -751,7 +751,7 @@ static void mioa701_machine_exit(void)
 }
 
 MACHINE_START(MIOA701, "MIO A701")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = &pxa27x_map_io,
         .init_irq       = &pxa27x_init_irq,
         .handle_irq     = &pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index fb408861dbcf..4af5d513c380 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -92,7 +92,7 @@ static void __init mp900c_init(void)
 
 /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
 MACHINE_START(NEC_MP900, "MobilePro900/C")
-        .boot_params    = 0xa0220100,
+        .atag_offset    = 0x220100,
         .timer          = &pxa_timer,
         .map_io         = pxa25x_map_io,
         .init_irq       = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 6b77365ed938..3d4a2819cae1 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -342,7 +342,7 @@ static void __init palmld_init(void)
 }
 
 MACHINE_START(PALMLD, "Palm LifeDrive")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = palmld_map_io,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 9bd3e47486fb..99d6bcf1f974 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -202,7 +202,7 @@ static void __init palmt5_init(void)
 }
 
 MACHINE_START(PALMT5, "Palm Tungsten|T5")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .reserve        = palmt5_reserve,
         .init_irq       = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ad4a6c7bc96..6ec7caefb37c 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -537,7 +537,7 @@ static void __init palmtc_init(void)
 };
 
 MACHINE_START(PALMTC, "Palm Tungsten|C")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa25x_map_io,
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 664232f3e62c..9376da06404c 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -356,7 +356,7 @@ static void __init palmte2_init(void)
 }
 
 MACHINE_START(PALMTE2, "Palm Tungsten|E2")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa25x_map_io,
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index bb27d4b688d8..7346fbfa8101 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -440,7 +440,7 @@ static void __init centro_init(void)
 }
 
 MACHINE_START(TREO680, "Palm Treo 680")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .reserve        = treo_reserve,
         .init_irq       = pxa27x_init_irq,
@@ -450,7 +450,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
 MACHINE_END
 
 MACHINE_START(CENTRO, "Palm Centro 685")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .reserve        = treo_reserve,
         .init_irq       = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fc4285589c1f..2b9e76fc2c90 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -364,7 +364,7 @@ static void __init palmtx_init(void)
 }
 
 MACHINE_START(PALMTX, "Palm T|X")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = palmtx_map_io,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index e61c1cc05519..68e18baf8e07 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -399,7 +399,7 @@ static void __init palmz72_init(void)
 }
 
 MACHINE_START(PALMZ72, "Palm Zire72")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index ffa65dfb8c6f..0b825a353537 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -258,7 +258,7 @@ static void __init pcm027_map_io(void)
 
 MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
         /* Maintainer: Pengutronix */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pcm027_map_io,
         .nr_irqs        = PCM027_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index bbcd90562ebe..6810cddec927 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1086,7 +1086,7 @@ static void __init raumfeld_speaker_init(void)
 
 #ifdef CONFIG_MACH_RAUMFELD_RC
 MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
-        .boot_params    = RAUMFELD_SDRAM_BASE + 0x100,
+        .atag_offset    = 0x100,
         .init_machine   = raumfeld_controller_init,
         .map_io         = pxa3xx_map_io,
         .init_irq       = pxa3xx_init_irq,
@@ -1097,7 +1097,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
 MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
-        .boot_params    = RAUMFELD_SDRAM_BASE + 0x100,
+        .atag_offset    = 0x100,
         .init_machine   = raumfeld_connector_init,
         .map_io         = pxa3xx_map_io,
         .init_irq       = pxa3xx_init_irq,
@@ -1108,7 +1108,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_RAUMFELD_SPEAKER
 MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
-        .boot_params    = RAUMFELD_SDRAM_BASE + 0x100,
+        .atag_offset    = 0x100,
         .init_machine   = raumfeld_speaker_init,
         .map_io         = pxa3xx_map_io,
         .init_irq       = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 72001ec6e7b5..fc2c1e05af9c 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -596,7 +596,7 @@ static void __init saar_init(void)
 
 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
         /* Maintainer: Eric Miao <eric.miao@marvell.com> */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa3xx_map_io,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq       = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index eb6a10d85b03..3c988b6f718f 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -103,7 +103,7 @@ static void __init saarb_init(void)
 }
 
 MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa3xx_map_io,
         .nr_irqs        = SAARB_NR_IRQS,
         .init_irq       = pxa95x_init_irq,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3f8d0af9e2f7..4c9a48bef569 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1004,7 +1004,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2")
         .handle_irq     = pxa27x_handle_irq,
         .timer          = &pxa_timer,
         .init_machine   = imote2_init,
-        .boot_params    = 0xA0000100,
+        .atag_offset    = 0x100,
 MACHINE_END
 #endif
 
@@ -1016,6 +1016,6 @@ MACHINE_START(STARGATE2, "Stargate 2")
         .handle_irq = pxa27x_handle_irq,
         .timer = &pxa_timer,
         .init_machine = stargate2_init,
-        .boot_params = 0xA0000100,
+        .atag_offset = 0x100,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 32fb58e01b10..ad47bb98f30d 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -489,7 +489,7 @@ static void __init tavorevb_init(void)
 
 MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
         /* Maintainer: Eric Miao <eric.miao@marvell.com> */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa3xx_map_io,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq       = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd5a8eae0a87..fd569167302a 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -125,7 +125,7 @@ static void __init evb3_init(void)
 }
 
 MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa3xx_map_io,
         .nr_irqs        = TAVOREVB3_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index c0417508f39d..35bbf13724b9 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -554,7 +554,7 @@ static void __init trizeps4_map_io(void)
 
 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
         /* MAINTAINER("Jürgen Schindele") */
-        .boot_params    = TRIZEPS4_SDRAM_BASE + 0x100,
+        .atag_offset    = 0x100,
         .init_machine   = trizeps4_init,
         .map_io         = trizeps4_map_io,
         .init_irq       = pxa27x_init_irq,
@@ -564,7 +564,7 @@ MACHINE_END
 
 MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
         /* MAINTAINER("Jürgen Schindele") */
-        .boot_params    = TRIZEPS4_SDRAM_BASE + 0x100,
+        .atag_offset    = 0x100,
         .init_machine   = trizeps4_init,
         .map_io         = trizeps4_map_io,
         .init_irq       = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d4a3dc74e84a..242ddae332d3 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -992,7 +992,7 @@ static void __init viper_map_io(void)
 
 MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
         /* Maintainer: Marc Zyngier <maz@misterjones.org> */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = viper_map_io,
         .init_irq       = viper_init_irq,
         .handle_irq     = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 5f8490ab07cb..a7539a6ed1ff 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -716,7 +716,7 @@ static void __init vpac270_init(void)
 }
 
 MACHINE_START(VPAC270, "Voipac PXA270")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 937c42845df9..70e1730ef282 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -179,7 +179,7 @@ static void __init xcep_init(void)
 }
 
 MACHINE_START(XCEP, "Iskratel XCEP")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .init_machine   = xcep_init,
         .map_io         = pxa25x_map_io,
         .init_irq       = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 6c9275a20c91..84ed72de53b5 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -686,7 +686,7 @@ static void z2_power_off(void)
          */
         PSPR = 0x0;
         local_irq_disable();
-        pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+        pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PHYS_OFFSET - PAGE_OFFSET);
 }
 #else
 #define z2_power_off   NULL
@@ -718,7 +718,7 @@ static void __init z2_init(void)
 }
 
 MACHINE_START(ZIPIT2, "Zipit Z2")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa27x_map_io,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 99c49bcd9f70..c424e7d85ce3 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -904,7 +904,7 @@ static void __init zeus_map_io(void)
 
 MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
         /* Maintainer: Marc Zyngier <maz@misterjones.org> */
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = zeus_map_io,
         .nr_irqs        = ZEUS_NR_IRQS,
         .init_irq       = zeus_init_irq,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 15ec66b3471a..31d496891891 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -422,7 +422,7 @@ static void __init zylonite_init(void)
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-        .boot_params    = 0xa0000100,
+        .atag_offset    = 0x100,
         .map_io         = pxa3xx_map_io,
         .nr_irqs        = ZYLONITE_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 90b687cbe04e..fb4901c4ef04 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,7 +33,7 @@
 #error "Unknown RealView platform"
 #endif
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #DEBUG_LL_UART_OFFSET
                 orr     \rv, \rp, #0xfb000000   @ virtual base
                 orr     \rp, \rp, #0x10000000   @ physical base
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7a4e3b18cb3e..026c66ad7ec2 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -463,7 +463,7 @@ static void __init realview_eb_init(void)
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
         /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-        .boot_params    = PLAT_PHYS_OFFSET + 0x00000100,
+        .atag_offset    = 0x100,
         .fixup          = realview_fixup,
         .map_io         = realview_eb_map_io,
         .init_early     = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 865d440fcf58..c057540ec776 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -386,7 +386,7 @@ static void __init realview_pb1176_init(void)
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
         /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-        .boot_params    = PLAT_PHYS_OFFSET + 0x00000100,
+        .atag_offset    = 0x100,
         .fixup          = realview_pb1176_fixup,
         .map_io         = realview_pb1176_map_io,
         .init_early     = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b43644b3685e..671ad6d6ff00 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -360,7 +360,7 @@ static void __init realview_pb11mp_init(void)
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
         /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-        .boot_params    = PLAT_PHYS_OFFSET + 0x00000100,
+        .atag_offset    = 0x100,
         .fixup          = realview_fixup,
         .map_io         = realview_pb11mp_map_io,
         .init_early     = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 763e8f38c15d..cbf22df4ad5b 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -310,7 +310,7 @@ static void __init realview_pba8_init(void)
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
         /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-        .boot_params    = PLAT_PHYS_OFFSET + 0x00000100,
+        .atag_offset    = 0x100,
         .fixup          = realview_fixup,
         .map_io         = realview_pba8_map_io,
         .init_early     = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 3e1eb2eb8132..63c4114afae9 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -393,7 +393,7 @@ static void __init realview_pbx_init(void)
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
         /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-        .boot_params    = PLAT_PHYS_OFFSET + 0x00000100,
+        .atag_offset    = 0x100,
         .fixup          = realview_pbx_fixup,
         .map_io         = realview_pbx_map_io,
         .init_early     = realview_init_early,
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index 85effffdc2b2..6d28cc99b124 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0x00010000
                 orr     \rp, \rp, #0x00000fe0
                 orr     \rv, \rp, #0xe0000000   @ virtual
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 1e0e60d04622..8559598ab767 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -218,7 +218,7 @@ extern struct sys_timer ioc_timer;
 
 MACHINE_START(RISCPC, "Acorn-RiscPC")
         /* Maintainer: Russell King */
-        .boot_params    = 0x10000100,
+        .atag_offset    = 0x100,
         .reserve_lp0    = 1,
         .reserve_lp1    = 1,
         .map_io         = rpc_map_io,
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
deleted file mode 100644
index 3f33670dd012..000000000000
--- a/arch/arm/mach-s3c2400/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c2400/include/mach/memory.h
- *  from arch/arm/mach-rpc/include/mach/memory.h
- *
- *  Copyright 2007 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x0C000000)
-
-#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 5882deaa56be..4135de87d1f7 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-        .macro addruart, rp, rv
+        .macro addruart, rp, rv, tmp
                 ldr     \rp, = S3C24XX_PA_UART
                 ldr     \rv, = S3C24XX_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
deleted file mode 100644
index f92b97b89c0c..000000000000
--- a/arch/arm/mach-s3c2410/include/mach/memory.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/memory.h
- *  from arch/arm/mach-rpc/include/mach/memory.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x30000000)
-
-#endif
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index dabc141243f3..79838942b0ac 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -236,7 +236,7 @@ static void __init amlm5900_init(void)
 }
 
 MACHINE_START(AML_M5900, "AML_M5900")
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = amlm5900_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = amlm5900_init,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1e2d536adda9..a20ae1ad4062 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -657,7 +657,7 @@ static void __init bast_init(void)
 
 MACHINE_START(BAST, "Simtec-BAST")
         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = bast_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = bast_init,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 2a2fa0620133..556c535829f0 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -744,7 +744,7 @@ static void __init h1940_init(void)
 
 MACHINE_START(H1940, "IPAQ-H1940")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = h1940_map_io,
         .reserve        = h1940_reserve,
         .init_irq       = h1940_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 079dcaa602d3..1dc3e3234417 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -586,7 +586,7 @@ MACHINE_START(N30, "Acer-N30")
         /* Maintainer: Christer Weinigel <christer@weinigel.se>,
                                 Ben Dooks <ben-linux@fluff.org>
         */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .timer          = &s3c24xx_timer,
         .init_machine   = n30_init,
         .init_irq       = s3c24xx_init_irq,
@@ -596,7 +596,7 @@ MACHINE_END
 MACHINE_START(N35, "Acer-N35")
         /* Maintainer: Christer Weinigel <christer@weinigel.se>
         */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .timer          = &s3c24xx_timer,
         .init_machine   = n30_init,
         .init_irq       = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 0aa16cd5acbc..f03f3fd9cec9 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -116,7 +116,7 @@ static void __init otom11_init(void)
 
 MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
         /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = otom11_map_io,
         .init_machine   = otom11_init,
         .init_irq       = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index f44f77531b1e..367d376deb96 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -344,7 +344,7 @@ static void __init qt2410_machine_init(void)
 }
 
 MACHINE_START(QT2410, "QT2410")
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = qt2410_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = qt2410_machine_init,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index e17f03387aba..99c9dfdb71c7 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -111,7 +111,7 @@ static void __init smdk2410_init(void)
 MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
                                     * to SMDK2410 */
         /* Maintainer: Jonas Dietsche */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = smdk2410_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = smdk2410_init,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 43c2b831b9e8..e0d0b6fb2800 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -146,7 +146,7 @@ static void __init tct_hammer_init(void)
 }
 
 MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = tct_hammer_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = tct_hammer_init,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 6ccce5a761b4..df47e8e90065 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -400,7 +400,7 @@ static void __init vr1000_init(void)
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = vr1000_map_io,
         .init_machine   = vr1000_init,
         .init_irq       = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 5eeb47580b0c..286ef1738c61 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -655,7 +655,7 @@ static void __init jive_machine_init(void)
 
 MACHINE_START(JIVE, "JIVE")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
 
         .init_irq       = s3c24xx_init_irq,
         .map_io         = jive_map_io,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 3391713e0c92..f1eec1b54932 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -127,7 +127,7 @@ static void __init smdk2413_machine_init(void)
 
 MACHINE_START(S3C2413, "S3C2413")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
 
         .fixup          = smdk2413_fixup,
         .init_irq       = s3c24xx_init_irq,
@@ -138,7 +138,7 @@ MACHINE_END
 
 MACHINE_START(SMDK2412, "SMDK2412")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
 
         .fixup          = smdk2413_fixup,
         .init_irq       = s3c24xx_init_irq,
@@ -149,7 +149,7 @@ MACHINE_END
 
 MACHINE_START(SMDK2413, "SMDK2413")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
 
         .fixup          = smdk2413_fixup,
         .init_irq       = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index b6ed4573553a..1bbb1ef5f4ff 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -155,7 +155,7 @@ static void __init vstms_init(void)
 }
 
 MACHINE_START(VSTMS, "VSTMS")
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
 
         .fixup          = vstms_fixup,
         .init_irq       = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index ac27ebb31c9b..a9eee531ca76 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -245,7 +245,7 @@ static void __init smdk2416_machine_init(void)
 
 MACHINE_START(SMDK2416, "SMDK2416")
         /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
 
         .init_irq       = s3c24xx_init_irq,
         .map_io         = smdk2416_map_io,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index d7086788b1ff..74f92fc3fd04 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -498,7 +498,7 @@ static void __init anubis_init(void)
 
 MACHINE_START(ANUBIS, "Simtec-Anubis")
         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = anubis_map_io,
         .init_machine   = anubis_init,
         .init_irq       = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 6c98b789b8c6..38887ee0c784 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -233,7 +233,7 @@ static void __init at2440evb_init(void)
 
 
 MACHINE_START(AT2440EVB, "AT2440EVB")
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = at2440evb_map_io,
         .init_machine   = at2440evb_init,
         .init_irq       = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index c10ddf4ed7f1..de1e0ff46cec 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -595,7 +595,7 @@ static void __init gta02_machine_init(void)
 
 MACHINE_START(NEO1973_GTA02, "GTA02")
         /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = gta02_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = gta02_machine_init,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index fc2dc0b3d4fe..91fe0b4c95f1 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -676,7 +676,7 @@ static void __init mini2440_init(void)
 
 MACHINE_START(MINI2440, "MINI2440")
         /* Maintainer: Michel Pollet <buserror@gmail.com> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = mini2440_map_io,
         .init_machine   = mini2440_init,
         .init_irq       = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 37dd306fb7dc..61c0bf148165 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -151,7 +151,7 @@ static void __init nexcoder_init(void)
 
 MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
         /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = nexcoder_map_io,
         .init_machine   = nexcoder_init,
         .init_irq       = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index d88536393310..dc142ebf8cba 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -447,7 +447,7 @@ static void __init osiris_init(void)
 
 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = osiris_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = osiris_init,
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 27ea95096fe1..684dbb3567f5 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -825,7 +825,7 @@ static void __init rx1950_reserve(void)
 
 MACHINE_START(RX1950, "HP iPAQ RX1950")
     /* Maintainers: Vasily Khoruzhick */
-        .boot_params = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset = 0x100,
         .map_io = rx1950_map_io,
         .reserve        = rx1950_reserve,
         .init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 1472b1a5b2fb..e19499c2f909 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -218,7 +218,7 @@ static void __init rx3715_init_machine(void)
 
 MACHINE_START(RX3715, "IPAQ-RX3715")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
         .map_io         = rx3715_map_io,
         .reserve        = rx3715_reserve,
         .init_irq       = rx3715_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index eedfe0f11643..36eeb4197a84 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -175,7 +175,7 @@ static void __init smdk2440_machine_init(void)
 
 MACHINE_START(S3C2440, "SMDK2440")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
 
         .init_irq       = s3c24xx_init_irq,
         .map_io         = smdk2440_map_io,
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 514275e43ca0..bec107e00441 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -139,7 +139,7 @@ static void __init smdk2443_machine_init(void)
 
 MACHINE_START(SMDK2443, "SMDK2443")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .atag_offset    = 0x100,
 
         .init_irq       = s3c24xx_init_irq,
         .map_io         = smdk2443_map_io,
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 374e45e566b8..8dc05763a7eb 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -20,6 +20,7 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/hardware.h>
 #include <mach/map.h>
@@ -145,6 +146,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
         /* initialise the io descriptors we need for initialisation */
         iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
         iotable_init(mach_desc, size);
+        init_consistent_dma_size(SZ_8M);
 
         idcode = __raw_readl(S3C_VA_SYS + 0x118);
         if (!idcode) {
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index a29e70550c70..c0c076a90f27 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
          * aligned and add in the offset when we load the value here.
          */
 
-        .macro addruart, rp, rv
+        .macro addruart, rp, rv, tmp
                 ldr     \rp, = S3C_PA_UART
                 ldr     \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
deleted file mode 100644
index 4760cdae1eb6..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/memory.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET     UL(0x50000000)
-
-#define CONSISTENT_DMA_SIZE     SZ_8M
-
-#endif
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index cb8864327ac4..d164a282bfb4 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -233,7 +233,7 @@ static void __init anw6410_machine_init(void)
 
 MACHINE_START(ANW6410, "A&W6410")
         /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
-        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
 
         .init_irq       = s3c6410_init_irq,
         .map_io         = anw6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index af0c2fe1ea37..4c76e08423fb 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -766,7 +766,7 @@ static void __init crag6410_machine_init(void)
 
 MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
         /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
-        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
         .map_io         = crag6410_map_io,
         .init_machine   = crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index b3d93cc8dde0..19a0887e1c1e 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -265,7 +265,7 @@ static void __init hmt_machine_init(void)
 
 MACHINE_START(HMT, "Airgoo-HMT")
         /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
-        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
         .map_io         = hmt_map_io,
         .init_machine   = hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 527f49bd1b57..e91f63f7a490 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -349,7 +349,7 @@ static void __init mini6410_machine_init(void)
 
 MACHINE_START(MINI6410, "MINI6410")
         /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
         .map_io         = mini6410_map_io,
         .init_machine   = mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 01c6857c5b63..c30f2e5e0d85 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -97,7 +97,7 @@ static void __init ncp_machine_init(void)
 
 MACHINE_START(NCP, "NCP")
         /* Maintainer: Samsung Electronics */
-        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
         .map_io         = ncp_map_io,
         .init_machine   = ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 95b04b1729e3..10870cb5b39e 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -329,7 +329,7 @@ static void __init real6410_machine_init(void)
 
 MACHINE_START(REAL6410, "REAL6410")
         /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
 
         .init_irq       = s3c6410_init_irq,
         .map_io         = real6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 342e8dfddf8b..cbb57ded3d95 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -146,7 +146,7 @@ static void __init smartq5_machine_init(void)
 
 MACHINE_START(SMARTQ5, "SmartQ 5")
         /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
         .map_io         = smartq_map_io,
         .init_machine   = smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 57963977da8e..04f914b85fdf 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -162,7 +162,7 @@ static void __init smartq7_machine_init(void)
 
 MACHINE_START(SMARTQ7, "SmartQ 7")
         /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
         .map_io         = smartq_map_io,
         .init_machine   = smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 3cca642f1e6d..6fd5e95f8f75 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -85,7 +85,7 @@ static void __init smdk6400_machine_init(void)
 
 MACHINE_START(SMDK6400, "SMDK6400")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
 
         .init_irq       = s3c6400_init_irq,
         .map_io         = smdk6400_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index a9f3183e0290..7b66ede9fbcd 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -703,7 +703,7 @@ static void __init smdk6410_machine_init(void)
 
 MACHINE_START(SMDK6410, "SMDK6410")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
 
         .init_irq       = s3c6410_init_irq,
         .map_io         = smdk6410_map_io,
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index a5c00952ea35..8a938542c54d 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -20,6 +20,7 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -111,6 +112,7 @@ void __init s5p6440_map_io(void)
 
         iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
         iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+        init_consistent_dma_size(SZ_8M);
 }
 
 void __init s5p6450_map_io(void)
@@ -120,6 +122,7 @@ void __init s5p6450_map_io(void)
 
         iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
         iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+        init_consistent_dma_size(SZ_8M);
 }
 
 /*
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
index 79b04e6a6f8e..e80ba3c69814 100644
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
 
 #include <plat/regs-serial.h>
 
-        .macro addruart, rp, rv
+        .macro addruart, rp, rv, tmp
                 mov     \rp, #0xE0000000
                 orr     \rp, \rp, #0x00100000
                 ldr     \rp, [\rp, #0x118 ]
diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h
deleted file mode 100644
index 365a6eb4b88f..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * S5P64X0 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET                UL(0x20000000)
-#define CONSISTENT_DMA_SIZE     SZ_8M
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 346f8dfa6f35..3b84e9bfd073 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -171,7 +171,7 @@ static void __init smdk6440_machine_init(void)
 
 MACHINE_START(SMDK6440, "SMDK6440")
         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-        .boot_params    = S5P64X0_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
 
         .init_irq       = s5p6440_init_irq,
         .map_io         = smdk6440_map_io,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 33f2adf8f3fe..d99d29b5558e 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -190,7 +190,7 @@ static void __init smdk6450_machine_init(void)
 
 MACHINE_START(SMDK6450, "SMDK6450")
         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-        .boot_params    = S5P64X0_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
 
         .init_irq       = s5p6450_init_irq,
         .map_io         = smdk6450_map_io,
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index b2ba95ddf8e0..694f75937000 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
          * aligned and add in the offset when we load the value here.
          */
 
-        .macro addruart, rp, rv
+        .macro addruart, rp, rv, tmp
                 ldr     \rp, = S3C_PA_UART
                 ldr     \rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
deleted file mode 100644
index bda4e79fd5fc..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/memory.h
- *
- * Copyright 2008 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x20000000)
-
-#endif
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 227d8908aab6..688f45b7cd00 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -254,7 +254,7 @@ static void __init smdkc100_machine_init(void)
 
 MACHINE_START(SMDKC100, "SMDKC100")
         /* Maintainer: Byungho Min <bhmin@samsung.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s5pc100_init_irq,
         .map_io         = smdkc100_map_io,
         .init_machine   = smdkc100_machine_init,
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 79907ec78d43..91145720822c 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -20,6 +20,7 @@
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -119,6 +120,7 @@ static void s5pv210_sw_reset(void)
 void __init s5pv210_map_io(void)
 {
         iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+        init_consistent_dma_size(14 << 20);
 
         /* initialise device information early */
         s5pv210_default_sdhci0();
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 169fe654a59e..79e55597ab63 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
          * aligned and add in the offset when we load the value here.
          */
 
-        .macro addruart, rp, rv
+        .macro addruart, rp, rv, tmp
                 ldr     \rp, = S3C_PA_UART
                 ldr     \rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
index 7b5fcf0da0c4..2d3cfa221d5f 100644
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -14,7 +14,6 @@
 #define __ASM_ARCH_MEMORY_H
 
 #define PLAT_PHYS_OFFSET                UL(0x20000000)
-#define CONSISTENT_DMA_SIZE     (SZ_8M + SZ_4M + SZ_2M)
 
 /*
  * Sparsemem support
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 509627f25111..5811a96125f0 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -678,7 +678,7 @@ MACHINE_START(AQUILA, "Aquila")
         /* Maintainers:
            Marek Szyprowski <m.szyprowski@samsung.com>
            Kyungmin Park <kyungmin.park@samsung.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
         .map_io         = aquila_map_io,
         .init_machine   = aquila_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 85c2d51a0956..061cc7e4f48c 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -897,7 +897,7 @@ static void __init goni_machine_init(void)
 
 MACHINE_START(GONI, "GONI")
         /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
         .map_io         = goni_map_io,
         .init_machine   = goni_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 6c412c8ceccc..f7266bb0cac8 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -136,7 +136,7 @@ static void __init smdkc110_machine_init(void)
 
 MACHINE_START(SMDKC110, "SMDKC110")
         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
         .map_io         = smdkc110_map_io,
         .init_machine   = smdkc110_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 5e011fc6720d..e73e3b6d41b5 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -319,7 +319,7 @@ static void __init smdkv210_machine_init(void)
 
 MACHINE_START(SMDKV210, "SMDKV210")
         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
         .map_io         = smdkv210_map_io,
         .init_machine   = smdkv210_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 925fc0dc6252..97cc066c5369 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -125,7 +125,7 @@ static void __init torbreck_machine_init(void)
 
 MACHINE_START(TORBRECK, "TORBRECK")
         /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
-        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
         .map_io         = torbreck_map_io,
         .init_machine   = torbreck_machine_init,
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 6290ce28b883..3dd133f18415 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -446,7 +446,7 @@ static void __init assabet_map_io(void)
 
 
 MACHINE_START(ASSABET, "Intel-Assabet")
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .fixup          = fixup_assabet,
         .map_io         = assabet_map_io,
         .init_irq       = sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b4311b0a4395..bda83e1ab078 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -302,7 +302,7 @@ static void __init badge4_map_io(void)
 }
 
 MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .map_io         = badge4_map_io,
         .init_irq       = sa1100_init_irq,
         .timer          = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 03d7376cf8a0..b30733a2b82e 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -84,7 +84,7 @@ static void __init h3100_mach_init(void)
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .map_io         = h3100_map_io,
         .init_irq       = sa1100_init_irq,
         .timer          = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 965f64a836f8..6fd324d92389 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -125,7 +125,7 @@ static void __init h3600_mach_init(void)
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .map_io         = h3600_map_io,
         .init_irq       = sa1100_init_irq,
         .timer          = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index db5e434a17db..30f4a551b8e5 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -195,7 +195,7 @@ static void __init hackkit_init(void)
  */
 
 MACHINE_START(HACKKIT, "HackKit Cpu Board")
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .map_io         = hackkit_map_io,
         .init_irq       = sa1100_init_irq,
         .timer          = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 0cd0fc9635b6..530772d937ad 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
 */
 #include <mach/hardware.h>
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mrc     p15, 0, \rp, c1, c0
                 tst     \rp, #1                 @ MMU enabled?
                 moveq   \rp, #0x80000000        @ physical base address
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 176c066aec7e..0bb520d48ed0 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -364,7 +364,7 @@ static void __init jornada720_mach_init(void)
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
         /* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .map_io         = jornada720_map_io,
         .init_irq       = sa1100_init_irq,
         .timer          = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b9556b59057..5bc59d0947ba 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -61,7 +61,7 @@ static void __init lart_map_io(void)
 }
 
 MACHINE_START(LART, "LART")
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .map_io         = lart_map_io,
         .init_irq       = sa1100_init_irq,
         .init_machine   = lart_init,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 72087f0658b7..032f3881d145 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -111,7 +111,7 @@ static void __init nanoengine_init(void)
 }
 
 MACHINE_START(NANOENGINE, "BSE nanoEngine")
-        .boot_params    = 0xc0000000,
+        .atag_offset    = 0x100,
         .map_io         = nanoengine_map_io,
         .init_irq       = sa1100_init_irq,
         .timer          = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 7917b2405579..1cccbf5b9e9a 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -82,7 +82,7 @@ static void __init shannon_map_io(void)
 }
 
 MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .map_io         = shannon_map_io,
         .init_irq       = sa1100_init_irq,
         .timer          = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 34659f354bef..4790f3f3d008 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -392,7 +392,7 @@ arch_initcall(simpad_init);
 
 MACHINE_START(SIMPAD, "Simpad")
         /* Maintainer: Holger Freyther */
-        .boot_params    = 0xc0000100,
+        .atag_offset    = 0x100,
         .map_io         = simpad_map_io,
         .init_irq       = sa1100_init_irq,
         .timer          = &sa1100_timer,
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index ac2873c8014b..feda3ca7fc95 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -152,7 +152,7 @@ static struct sys_timer shark_timer = {
 
 MACHINE_START(SHARK, "Shark")
         /* Maintainer: Alexander Schulz */
-        .boot_params    = 0x08003000,
+        .atag_offset    = 0x3000,
         .map_io         = shark_map_io,
         .init_irq       = shark_init_irq,
         .timer          = &shark_timer,
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index a473f55dc71f..20eb2bf2a42b 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #0xe0000000
                 orr     \rp, \rp, #0x000003f8
                 mov     \rv, \rp
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index cdfdd624d21d..5fde49da399a 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -37,6 +37,7 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
+#include <linux/dma-mapping.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -447,6 +448,8 @@ static struct map_desc ag5evm_io_desc[] __initdata = {
 static void __init ag5evm_map_io(void)
 {
         iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
+        /* DMA memory at 0xf6000000 - 0xffdfffff */
+        init_consistent_dma_size(158 << 20);
 
         /* setup early devices and console here as well */
         sh73a0_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 7e90d064ebcb..5b7edadf4647 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -43,6 +43,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/pm_clock.h>
+#include <linux/dma-mapping.h>
 
 #include <media/sh_mobile_ceu.h>
 #include <media/sh_mobile_csi2.h>
@@ -1171,6 +1172,8 @@ static struct map_desc ap4evb_io_desc[] __initdata = {
 static void __init ap4evb_map_io(void)
 {
         iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+        /* DMA memory at 0xf6000000 - 0xffdfffff */
+        init_consistent_dma_size(158 << 20);
 
         /* setup early devices and console here as well */
         sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index ef4613b993a2..8b620bf06221 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -32,6 +32,7 @@
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/dma-mapping.h>
 #include <mach/sh7367.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>
@@ -260,6 +261,8 @@ static struct map_desc g3evm_io_desc[] __initdata = {
 static void __init g3evm_map_io(void)
 {
         iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+        /* DMA memory at 0xf6000000 - 0xffdfffff */
+        init_consistent_dma_size(158 << 20);
 
         /* setup early devices and console here as well */
         sh7367_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 8e3c5559f27f..7719ddc5f591 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -33,6 +33,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/gpio.h>
+#include <linux/dma-mapping.h>
 #include <mach/sh7377.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>
@@ -274,6 +275,8 @@ static struct map_desc g4evm_io_desc[] __initdata = {
 static void __init g4evm_map_io(void)
 {
         iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+        /* DMA memory at 0xf6000000 - 0xffdfffff */
+        init_consistent_dma_size(158 << 20);
 
         /* setup early devices and console here as well */
         sh7377_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 00273dad5bf0..7d073c121941 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -45,6 +45,7 @@
 #include <linux/tca6416_keypad.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/usb/renesas_usbhs.h>
+#include <linux/dma-mapping.h>
 
 #include <video/sh_mobile_hdmi.h>
 #include <video/sh_mobile_lcdc.h>
@@ -1382,6 +1383,8 @@ static struct map_desc mackerel_io_desc[] __initdata = {
 static void __init mackerel_map_io(void)
 {
         iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
+        /* DMA memory at 0xf6000000 - 0xffdfffff */
+        init_consistent_dma_size(158 << 20);
 
         /* setup early devices and console here as well */
         sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/entry-intc.S b/arch/arm/mach-shmobile/entry-intc.S
index cac0a7ae2084..1a1c00ca39a2 100644
--- a/arch/arm/mach-shmobile/entry-intc.S
+++ b/arch/arm/mach-shmobile/entry-intc.S
@@ -51,7 +51,4 @@
         .macro  test_for_ipi, irqnr, irqstat, base, tmp
         .endm
 
-        .macro  test_for_ltirq, irqnr, irqstat, base, tmp
-        .endm
-
         arch_irq_handler shmobile_handle_irq_intc
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index d791f10eeac7..8d4a416d4285 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -27,8 +27,5 @@
         .macro  test_for_ipi, irqnr, irqstat, base, tmp
         .endm
 
-        .macro  test_for_ltirq, irqnr, irqstat, base, tmp
-        .endm
-
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
index ad00c3c258f4..0ffbe8155c76 100644
--- a/arch/arm/mach-shmobile/include/mach/memory.h
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -4,7 +4,4 @@
 #define PLAT_PHYS_OFFSET        UL(CONFIG_MEMORY_START)
 #define MEM_SIZE        UL(CONFIG_MEMORY_SIZE)
 
-/* DMA memory at 0xf6000000 - 0xffdfffff */
-#define CONSISTENT_DMA_SIZE (158 << 20)
-
 #endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h
deleted file mode 100644
index 51735221ea19..000000000000
--- a/arch/arm/mach-spear3xx/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/memory.h
- *
- * Memory map for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#include <plat/memory.h>
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index 69006f694220..a5ff98eed1db 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -64,7 +64,7 @@ static void __init spear300_evb_init(void)
 }
 
 MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
-        .boot_params    =       0x00000100,
+        .atag_offset    =       0x100,
         .map_io         =       spear3xx_map_io,
         .init_irq       =       spear3xx_init_irq,
         .timer          =       &spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index c8684ce1f9b3..45d180d59362 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -70,7 +70,7 @@ static void __init spear310_evb_init(void)
 }
 
 MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
-        .boot_params    =       0x00000100,
+        .atag_offset    =       0x100,
         .map_io         =       spear3xx_map_io,
         .init_irq       =       spear3xx_init_irq,
         .timer          =       &spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index a12b353940d6..22879848d73a 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -68,7 +68,7 @@ static void __init spear320_evb_init(void)
 }
 
 MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
-        .boot_params    =       0x00000100,
+        .atag_offset    =       0x100,
         .map_io         =       spear3xx_map_io,
         .init_irq       =       spear3xx_init_irq,
         .timer          =       &spear3xx_timer,
diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h
deleted file mode 100644
index 781f088fc228..000000000000
--- a/arch/arm/mach-spear6xx/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/memory.h
- *
- * Memory map for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#include <plat/memory.h>
-
-#endif  /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index f19cefe91a2b..8238fe38e713 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -43,7 +43,7 @@ static void __init spear600_evb_init(void)
 }
 
 MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
-        .boot_params    =       0x00000100,
+        .atag_offset    =       0x100,
         .map_io         =       spear6xx_map_io,
         .init_irq       =       spear6xx_init_irq,
         .timer          =       &spear6xx_timer,
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
index 4cb3c2dd905c..777a5bb9eed2 100644
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
@@ -73,7 +73,7 @@ static void __init tcc8k_map_io(void)
 }
 
 MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
-        .boot_params    = PLAT_PHYS_OFFSET + 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = tcc8k_map_io,
         .init_irq       = tcc8k_init_irq,
         .init_machine   = tcc8k_init,
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index c78ce41cca16..93c793f48caf 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -179,7 +179,7 @@ static void __init tegra_harmony_init(void)
 }
 
 MACHINE_START(HARMONY, "harmony")
-        .boot_params  = 0x00000100,
+        .atag_offset    = 0x100,
         .fixup          = tegra_harmony_fixup,
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 5e6bc7719642..fbc9e0ed926e 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -127,7 +127,7 @@ static void __init tegra_paz00_init(void)
 }
 
 MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .fixup          = tegra_paz00_fixup,
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 56cbabf6aa68..9e98ac706f40 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -201,7 +201,7 @@ static void __init tegra_wario_init(void)
 
 
 MACHINE_START(SEABOARD, "seaboard")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
         .init_irq       = tegra_init_irq,
@@ -210,7 +210,7 @@ MACHINE_START(SEABOARD, "seaboard")
 MACHINE_END
 
 MACHINE_START(KAEN, "kaen")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
         .init_irq       = tegra_init_irq,
@@ -219,7 +219,7 @@ MACHINE_START(KAEN, "kaen")
 MACHINE_END
 
 MACHINE_START(WARIO, "wario")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
         .init_irq       = tegra_init_irq,
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 652c3404d0e2..e3d9ec2f0fe1 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -171,7 +171,7 @@ static void __init tegra_trimslice_init(void)
 }
 
 MACHINE_START(TRIMSLICE, "trimslice")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .fixup          = tegra_trimslice_fixup,
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index e0ebe65c1657..619abc63aee8 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
 #include <mach/io.h>
 #include <mach/iomap.h>
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldr     \rp, =IO_APB_PHYS       @ physical
         ldr     \rv, =IO_APB_VIRT        @ virtual
         orr     \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/memory.h
deleted file mode 100644
index 537db3aa81a7..000000000000
--- a/arch/arm/mach-tegra/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/memory.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *      Colin Cross <ccross@google.com>
- *      Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_MEMORY_H
-#define __MACH_TEGRA_MEMORY_H
-
-/* physical offset of RAM */
-#define PLAT_PHYS_OFFSET                UL(0)
-
-#endif
-
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 24f3a96aac35..f4ad6d2e26f3 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -27,6 +27,7 @@
 #include <linux/mtd/fsmc.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinmux.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -95,6 +96,8 @@ static struct map_desc u300_io_desc[] __initdata = {
 void __init u300_map_io(void)
 {
         iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+        /* We enable a real big DMA buffer if need be. */
+        init_consistent_dma_size(SZ_4M);
 }
 
 /*
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index df715707bead..8ae8e4ab34b0 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  */
 #include <mach/hardware.h>
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         /* If we move the address using MMU, use this. */
         ldr     \rp,      = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
         ldr     \rv,      = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index 888e2e351ee1..7034bae95de6 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -16,7 +16,7 @@
 #ifdef CONFIG_MACH_U300_DUAL_RAM
 
 #define PLAT_PHYS_OFFSET                UL(0x48000000)
-#define BOOT_PARAMS_OFFSET      (PHYS_OFFSET + 0x100)
+#define BOOT_PARAMS_OFFSET              0x100
 
 #else
 
@@ -24,19 +24,14 @@
 #define PLAT_PHYS_OFFSET (0x28000000 + \
              (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
              (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#define BOOT_PARAMS_OFFSET (0x100 + \
+             (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1)*1024*1024*2)
 #else
 #define PLAT_PHYS_OFFSET (0x28000000 + \
              (CONFIG_MACH_U300_ACCESS_MEM_SIZE +        \
              (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#define BOOT_PARAMS_OFFSET 0x100
 #endif
-#define BOOT_PARAMS_OFFSET (0x28000000 + \
-            (CONFIG_MACH_U300_ACCESS_MEM_SIZE +         \
-            (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
 #endif
 
-/*
- * We enable a real big DMA buffer if need be.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-
 #endif
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 48b3b7f39966..80e7305589c6 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -61,7 +61,7 @@ static void __init u300_init_machine(void)
 
 MACHINE_START(U300, MACH_U300_STRING)
         /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
-        .boot_params    = BOOT_PARAMS_OFFSET,
+        .atag_offset    = BOOT_PARAMS_OFFSET,
         .map_io         = u300_map_io,
         .reserve        = u300_reserve,
         .init_irq       = u300_init_irq,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 537ab63c1dc9..f67b83dd9010 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -646,7 +646,7 @@ static void __init mop500_init_machine(void)
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
         /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-        .boot_params    = 0x100,
+        .atag_offset    = 0x100,
         .map_io         = u8500_map_io,
         .init_irq       = ux500_init_irq,
         /* we re-use nomadik timer here */
@@ -655,7 +655,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 MACHINE_END
 
 MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
-        .boot_params    = 0x100,
+        .atag_offset    = 0x100,
         .map_io         = u8500_map_io,
         .init_irq       = ux500_init_irq,
         .timer          = &ux500_timer,
@@ -663,7 +663,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 MACHINE_END
 
 MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
-        .boot_params    = 0x100,
+        .atag_offset    = 0x100,
         .map_io         = u8500_map_io,
         .init_irq       = ux500_init_irq,
         /* we re-use nomadik timer here */
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 2d9e191bd30a..e014aa749b03 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -118,7 +118,7 @@ static void __init u5500_init_machine(void)
 }
 
 MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = u5500_map_io,
         .init_irq       = ux500_init_irq,
         .timer          = &ux500_timer,
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 700fb05ee815..8d74d927d4e2 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -35,7 +35,7 @@
 #define UX500_UART(n)   __UX500_UART(n)
 #define UART_BASE       UX500_UART(CONFIG_UX500_DEBUG_UART)
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         ldr     \rp, =UART_BASE                         @ no, physical address
         ldr     \rv, =IO_ADDRESS(UART_BASE)             @ yes, virtual address
         .endm
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
deleted file mode 100644
index 2ef697a67006..000000000000
--- a/arch/arm/mach-ux500/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-#define BUS_OFFSET      UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index eb2cf7dc5c44..d0fbd7f1cb00 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp,      #0x001F0000
                 orr     \rp, \rp, #0x00001000
                 orr     \rv, \rp, #0xf1000000   @ virtual base
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
deleted file mode 100644
index dacc9d8e4e6a..000000000000
--- a/arch/arm/mach-versatile/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index f8ae64b3eed0..fda4866703cd 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -35,7 +35,7 @@
 
 MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
         /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = versatile_map_io,
         .init_early     = versatile_init_early,
         .init_irq       = versatile_init_irq,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 37c23dfeefb7..feaf9cbe60f6 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -103,7 +103,7 @@ static void __init versatile_pb_init(void)
 
 MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
         /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = versatile_map_io,
         .init_early     = versatile_init_early,
         .init_irq       = versatile_init_irq,
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index 050d65e02a42..fd9e6c7ea49f 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
 
 #define DEBUG_LL_UART_OFFSET    0x00009000
 
-                .macro  addruart,rp,rv
+                .macro  addruart,rp,rv,tmp
                 mov     \rp, #DEBUG_LL_UART_OFFSET
                 orr     \rv, \rp, #0xf8000000   @ virtual base
                 orr     \rp, \rp, #0x10000000   @ physical base
diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h
deleted file mode 100644
index 5b7fcd439d87..000000000000
--- a/arch/arm/mach-vexpress/include/mach/memory.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  arch/arm/mach-vexpress/include/mach/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET                UL(0x60000000)
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d0d267a8d3f9..1fafc3244607 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -443,7 +443,7 @@ static void __init v2m_init(void)
 }
 
 MACHINE_START(VEXPRESS, "ARM-Versatile Express")
-        .boot_params    = PLAT_PHYS_OFFSET + 0x00000100,
+        .atag_offset    = 0x100,
         .map_io         = v2m_map_io,
         .init_early     = v2m_init_early,
         .init_irq       = v2m_init_irq,
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
index 94a261d86bf0..a464c7584411 100644
--- a/arch/arm/mach-vt8500/bv07.c
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -68,7 +68,7 @@ void __init bv07_init(void)
 }
 
 MACHINE_START(BV07, "Benign BV07 Mini Netbook")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .reserve        = vt8500_reserve_mem,
         .map_io         = vt8500_map_io,
         .init_irq       = vt8500_init_irq,
diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S
index f1191626ad51..ca292f29d4a3 100644
--- a/arch/arm/mach-vt8500/include/mach/debug-macro.S
+++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-        .macro  addruart, rp, rv
+        .macro  addruart, rp, rv, tmp
         mov     \rp,      #0x00200000
         orr     \rv, \rp, #0xf8000000
         orr     \rp, \rp, #0xd8000000
diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h
deleted file mode 100644
index 175f914eff93..000000000000
--- a/arch/arm/mach-vt8500/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET     UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
index e73aadbcafd6..cf910a956080 100644
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -68,7 +68,7 @@ void __init wm8505_7in_init(void)
 }
 
 MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
-        .boot_params    = 0x00000100,
+        .atag_offset    = 0x100,
         .reserve        = wm8505_reserve_mem,
         .map_io         = wm8505_map_io,
         .init_irq       = wm8505_init_irq,
diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h
deleted file mode 100644
index f02905ba7746..000000000000
--- a/arch/arm/mach-w90x900/include/mach/memory.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index 30fccde94fb8..31c109018228 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -34,7 +34,6 @@ static void __init nuc910evb_init(void)
 
 MACHINE_START(W90P910EVB, "W90P910EVB")
         /* Maintainer: Wan ZongShun */
-        .boot_params    = 0,
         .map_io         = nuc910evb_map_io,
         .init_irq       = nuc900_init_irq,
         .init_machine   = nuc910evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 590c99b96dc1..4062e55a57d8 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -37,7 +37,6 @@ static void __init nuc950evb_init(void)
 
 MACHINE_START(W90P950EVB, "W90P950EVB")
         /* Maintainer: Wan ZongShun */
-        .boot_params    = 0,
         .map_io         = nuc950evb_map_io,
         .init_irq       = nuc900_init_irq,
         .init_machine   = nuc950evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index e09c645d61b6..0ab9995d5b58 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -34,7 +34,6 @@ static void __init nuc960evb_init(void)
 
 MACHINE_START(W90N960EVB, "W90N960EVB")
         /* Maintainer: Wan ZongShun */
-        .boot_params    = 0,
         .map_io         = nuc960evb_map_io,
         .init_irq       = nuc900_init_irq,
         .init_machine   = nuc960evb_init,
diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S
index 9f664d5eb81d..3ab0be1f6191 100644
--- a/arch/arm/mach-zynq/include/mach/debug-macro.S
+++ b/arch/arm/mach-zynq/include/mach/debug-macro.S
@@ -17,7 +17,7 @@
 #include <mach/zynq_soc.h>
 #include <mach/uart.h>
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 ldr     \rp, =LL_UART_PADDR     @ physical
                 ldr     \rv, =LL_UART_VADDR     @ virtual
                 .endm
diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h
deleted file mode 100644
index 35a92634dcc1..000000000000
--- a/arch/arm/mach-zynq/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/memory.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MEMORY_H__
-#define __MACH_MEMORY_H__
-
-#include <asm/sizes.h>
-
-#define PLAT_PHYS_OFFSET        UL(0x0)
-
-#endif
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 235eb775fc78..e4e7f6cba1ab 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -18,12 +18,14 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/highmem.h>
+#include <linux/slab.h>
 
 #include <asm/memory.h>
 #include <asm/highmem.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <asm/sizes.h>
+#include <asm/mach/arch.h>
 
 #include "mm.h"
 
@@ -117,26 +119,36 @@ static void __dma_free_buffer(struct page *page, size_t size)
 }
 
 #ifdef CONFIG_MMU
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
 
-#define CONSISTENT_OFFSET(x)    (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PMD_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PMD_SHIFT)
+#define CONSISTENT_OFFSET(x)    (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PMD_SHIFT)
 
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+static pte_t **consistent_pte;
+
+#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
+
+unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+
+void __init init_consistent_dma_size(unsigned long size)
+{
+        unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M);
+
+        BUG_ON(consistent_pte); /* Check we're called before DMA region init */
+        BUG_ON(base < VMALLOC_END);
+
+        /* Grow region to accommodate specified size  */
+        if (base < consistent_base)
+                consistent_base = base;
+}
 
 #include "vmregion.h"
 
 static struct arm_vmregion_head consistent_head = {
         .vm_lock        = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
         .vm_list        = LIST_HEAD_INIT(consistent_head.vm_list),
-        .vm_start       = CONSISTENT_BASE,
         .vm_end         = CONSISTENT_END,
 };
 
@@ -155,7 +167,17 @@ static int __init consistent_init(void)
         pmd_t *pmd;
         pte_t *pte;
         int i = 0;
-        u32 base = CONSISTENT_BASE;
+        unsigned long base = consistent_base;
+        unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT;
+
+        consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
+        if (!consistent_pte) {
+                pr_err("%s: no memory\n", __func__);
+                return -ENOMEM;
+        }
+
+        pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END);
+        consistent_head.vm_start = base;
 
         do {
                 pgd = pgd_offset(&init_mm, base);
@@ -198,7 +220,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
         size_t align;
         int bit;
 
-        if (!consistent_pte[0]) {
+        if (!consistent_pte) {
                 printk(KERN_ERR "%s: not initialised\n", __func__);
                 dump_stack();
                 return NULL;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index f8037ba338ac..04e9a92bb47a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -660,9 +660,6 @@ void __init mem_init(void)
                         "    ITCM    : 0x%08lx - 0x%08lx   (%4ld kB)\n"
 #endif
                         "    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
-#ifdef CONFIG_MMU
-                        "    DMA     : 0x%08lx - 0x%08lx   (%4ld MB)\n"
-#endif
                         "    vmalloc : 0x%08lx - 0x%08lx   (%4ld MB)\n"
                         "    lowmem  : 0x%08lx - 0x%08lx   (%4ld MB)\n"
 #ifdef CONFIG_HIGHMEM
@@ -681,9 +678,6 @@ void __init mem_init(void)
                         MLK(ITCM_OFFSET, (unsigned long) itcm_end),
 #endif
                         MLK(FIXADDR_START, FIXADDR_TOP),
-#ifdef CONFIG_MMU
-                        MLM(CONSISTENT_BASE, CONSISTENT_END),
-#endif
                         MLM(VMALLOC_START, VMALLOC_END),
                         MLM(PAGE_OFFSET, (unsigned long)high_memory),
 #ifdef CONFIG_HIGHMEM
@@ -706,9 +700,6 @@ void __init mem_init(void)
          * be detected at build time already.
          */
 #ifdef CONFIG_MMU
-        BUILD_BUG_ON(VMALLOC_END                        > CONSISTENT_BASE);
-        BUG_ON(VMALLOC_END                              > CONSISTENT_BASE);
-
         BUILD_BUG_ON(TASK_SIZE                          > MODULES_VADDR);
         BUG_ON(TASK_SIZE                                > MODULES_VADDR);
 #endif
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 226f1804be12..dc8c550e6cbd 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -273,6 +273,14 @@ static struct mem_type mem_types[] = {
                 .prot_l1   = PMD_TYPE_TABLE,
                 .domain    = DOMAIN_KERNEL,
         },
+        [MT_MEMORY_SO] = {
+                .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+                                L_PTE_MT_UNCACHED,
+                .prot_l1   = PMD_TYPE_TABLE,
+                .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
+                                PMD_SECT_UNCACHED | PMD_SECT_XN,
+                .domain    = DOMAIN_KERNEL,
+        },
 };
 
 const struct mem_type *get_mem_type(unsigned int type)
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 2e6849b41f66..88fb3d9e0640 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -379,31 +379,26 @@ ENTRY(cpu_arm920_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl  cpu_arm920_suspend_size
-.equ    cpu_arm920_suspend_size, 4 * 4
+.equ    cpu_arm920_suspend_size, 4 * 3
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm920_do_suspend)
-        stmfd   sp!, {r4 - r7, lr}
+        stmfd   sp!, {r4 - r6, lr}
         mrc     p15, 0, r4, c13, c0, 0  @ PID
         mrc     p15, 0, r5, c3, c0, 0   @ Domain ID
-        mrc     p15, 0, r6, c2, c0, 0   @ TTB address
-        mrc     p15, 0, r7, c1, c0, 0   @ Control register
-        stmia   r0, {r4 - r7}
-        ldmfd   sp!, {r4 - r7, pc}
+        mrc     p15, 0, r6, c1, c0, 0   @ Control register
+        stmia   r0, {r4 - r6}
+        ldmfd   sp!, {r4 - r6, pc}
 ENDPROC(cpu_arm920_do_suspend)
 
 ENTRY(cpu_arm920_do_resume)
         mov     ip, #0
         mcr     p15, 0, ip, c8, c7, 0   @ invalidate I+D TLBs
         mcr     p15, 0, ip, c7, c7, 0   @ invalidate I+D caches
-        ldmia   r0, {r4 - r7}
+        ldmia   r0, {r4 - r6}
         mcr     p15, 0, r4, c13, c0, 0  @ PID
         mcr     p15, 0, r5, c3, c0, 0   @ Domain ID
-        mcr     p15, 0, r6, c2, c0, 0   @ TTB address
-        mov     r0, r7                  @ control register
-        mov     r2, r6, lsr #14         @ get TTB0 base
-        mov     r2, r2, lsl #14
-        ldr     r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
-                     PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+        mcr     p15, 0, r1, c2, c0, 0   @ TTB address
+        mov     r0, r6                  @ control register
         b       cpu_resume_mmu
 ENDPROC(cpu_arm920_do_resume)
 #endif
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index cd8f79c3a282..9f8fd91f918a 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -394,31 +394,26 @@ ENTRY(cpu_arm926_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl  cpu_arm926_suspend_size
-.equ    cpu_arm926_suspend_size, 4 * 4
+.equ    cpu_arm926_suspend_size, 4 * 3
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm926_do_suspend)
-        stmfd   sp!, {r4 - r7, lr}
+        stmfd   sp!, {r4 - r6, lr}
         mrc     p15, 0, r4, c13, c0, 0  @ PID
         mrc     p15, 0, r5, c3, c0, 0   @ Domain ID
-        mrc     p15, 0, r6, c2, c0, 0   @ TTB address
-        mrc     p15, 0, r7, c1, c0, 0   @ Control register
-        stmia   r0, {r4 - r7}
-        ldmfd   sp!, {r4 - r7, pc}
+        mrc     p15, 0, r6, c1, c0, 0   @ Control register
+        stmia   r0, {r4 - r6}
+        ldmfd   sp!, {r4 - r6, pc}
 ENDPROC(cpu_arm926_do_suspend)
 
 ENTRY(cpu_arm926_do_resume)
         mov     ip, #0
         mcr     p15, 0, ip, c8, c7, 0   @ invalidate I+D TLBs
         mcr     p15, 0, ip, c7, c7, 0   @ invalidate I+D caches
-        ldmia   r0, {r4 - r7}
+        ldmia   r0, {r4 - r6}
         mcr     p15, 0, r4, c13, c0, 0  @ PID
         mcr     p15, 0, r5, c3, c0, 0   @ Domain ID
-        mcr     p15, 0, r6, c2, c0, 0   @ TTB address
-        mov     r0, r7                  @ control register
-        mov     r2, r6, lsr #14         @ get TTB0 base
-        mov     r2, r2, lsl #14
-        ldr     r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
-                     PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+        mcr     p15, 0, r1, c2, c0, 0   @ TTB address
+        mov     r0, r6                  @ control register
         b       cpu_resume_mmu
 ENDPROC(cpu_arm926_do_resume)
 #endif
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 69e7f2ef7384..7d91545d089b 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -168,20 +168,19 @@ ENTRY(cpu_sa1100_set_pte_ext)
         mov     pc, lr
 
 .globl  cpu_sa1100_suspend_size
-.equ    cpu_sa1100_suspend_size, 4*4
+.equ    cpu_sa1100_suspend_size, 4 * 3
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_sa1100_do_suspend)
-        stmfd   sp!, {r4 - r7, lr}
+        stmfd   sp!, {r4 - r6, lr}
         mrc     p15, 0, r4, c3, c0, 0           @ domain ID
-        mrc     p15, 0, r5, c2, c0, 0           @ translation table base addr
-        mrc     p15, 0, r6, c13, c0, 0          @ PID
-        mrc     p15, 0, r7, c1, c0, 0           @ control reg
-        stmia   r0, {r4 - r7}                   @ store cp regs
-        ldmfd   sp!, {r4 - r7, pc}
+        mrc     p15, 0, r5, c13, c0, 0          @ PID
+        mrc     p15, 0, r6, c1, c0, 0           @ control reg
+        stmia   r0, {r4 - r6}                   @ store cp regs
+        ldmfd   sp!, {r4 - r6, pc}
 ENDPROC(cpu_sa1100_do_suspend)
 
 ENTRY(cpu_sa1100_do_resume)
-        ldmia   r0, {r4 - r7}                   @ load cp regs
+        ldmia   r0, {r4 - r6}                   @ load cp regs
         mov     ip, #0
         mcr     p15, 0, ip, c8, c7, 0           @ flush I+D TLBs
         mcr     p15, 0, ip, c7, c7, 0           @ flush I&D cache
@@ -189,13 +188,9 @@ ENTRY(cpu_sa1100_do_resume)
         mcr     p15, 0, ip, c9, c0, 5           @ allow user space to use RB
 
         mcr     p15, 0, r4, c3, c0, 0           @ domain ID
-        mcr     p15, 0, r5, c2, c0, 0           @ translation table base addr
-        mcr     p15, 0, r6, c13, c0, 0          @ PID
-        mov     r0, r7                          @ control register
-        mov     r2, r5, lsr #14                 @ get TTB0 base
-        mov     r2, r2, lsl #14
-        ldr     r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
-                     PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+        mcr     p15, 0, r1, c2, c0, 0           @ translation table base addr
+        mcr     p15, 0, r5, c13, c0, 0          @ PID
+        mov     r0, r6                          @ control register
         b       cpu_resume_mmu
 ENDPROC(cpu_sa1100_do_resume)
 #endif
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index a923aa0fd00d..d061d2fa5506 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -128,20 +128,18 @@ ENTRY(cpu_v6_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
 .globl  cpu_v6_suspend_size
-.equ    cpu_v6_suspend_size, 4 * 8
+.equ    cpu_v6_suspend_size, 4 * 6
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_v6_do_suspend)
-        stmfd   sp!, {r4 - r11, lr}
+        stmfd   sp!, {r4 - r9, lr}
         mrc     p15, 0, r4, c13, c0, 0  @ FCSE/PID
-        mrc     p15, 0, r5, c13, c0, 1  @ Context ID
-        mrc     p15, 0, r6, c3, c0, 0   @ Domain ID
-        mrc     p15, 0, r7, c2, c0, 0   @ Translation table base 0
-        mrc     p15, 0, r8, c2, c0, 1   @ Translation table base 1
-        mrc     p15, 0, r9, c1, c0, 1   @ auxiliary control register
-        mrc     p15, 0, r10, c1, c0, 2  @ co-processor access control
-        mrc     p15, 0, r11, c1, c0, 0  @ control register
-        stmia   r0, {r4 - r11}
-        ldmfd   sp!, {r4- r11, pc}
+        mrc     p15, 0, r5, c3, c0, 0   @ Domain ID
+        mrc     p15, 0, r6, c2, c0, 1   @ Translation table base 1
+        mrc     p15, 0, r7, c1, c0, 1   @ auxiliary control register
+        mrc     p15, 0, r8, c1, c0, 2   @ co-processor access control
+        mrc     p15, 0, r9, c1, c0, 0   @ control register
+        stmia   r0, {r4 - r9}
+        ldmfd   sp!, {r4- r9, pc}
 ENDPROC(cpu_v6_do_suspend)
 
 ENTRY(cpu_v6_do_resume)
@@ -150,25 +148,21 @@ ENTRY(cpu_v6_do_resume)
         mcr     p15, 0, ip, c7, c5, 0   @ invalidate I cache
         mcr     p15, 0, ip, c7, c15, 0  @ clean+invalidate cache
         mcr     p15, 0, ip, c7, c10, 4  @ drain write buffer
-        ldmia   r0, {r4 - r11}
+        mcr     p15, 0, ip, c13, c0, 1  @ set reserved context ID
+        ldmia   r0, {r4 - r9}
         mcr     p15, 0, r4, c13, c0, 0  @ FCSE/PID
-        mcr     p15, 0, r5, c13, c0, 1  @ Context ID
-        mcr     p15, 0, r6, c3, c0, 0   @ Domain ID
-        mcr     p15, 0, r7, c2, c0, 0   @ Translation table base 0
-        mcr     p15, 0, r8, c2, c0, 1   @ Translation table base 1
-        mcr     p15, 0, r9, c1, c0, 1   @ auxiliary control register
-        mcr     p15, 0, r10, c1, c0, 2  @ co-processor access control
+        mcr     p15, 0, r5, c3, c0, 0   @ Domain ID
+        ALT_SMP(orr     r1, r1, #TTB_FLAGS_SMP)
+        ALT_UP(orr      r1, r1, #TTB_FLAGS_UP)
+        mcr     p15, 0, r1, c2, c0, 0   @ Translation table base 0
+        mcr     p15, 0, r6, c2, c0, 1   @ Translation table base 1
+        mcr     p15, 0, r7, c1, c0, 1   @ auxiliary control register
+        mcr     p15, 0, r8, c1, c0, 2   @ co-processor access control
         mcr     p15, 0, ip, c2, c0, 2   @ TTB control register
         mcr     p15, 0, ip, c7, c5, 4   @ ISB
-        mov     r0, r11                 @ control register
-        mov     r2, r7, lsr #14         @ get TTB0 base
-        mov     r2, r2, lsl #14
-        ldr     r3, cpu_resume_l1_flags
+        mov     r0, r9                  @ control register
         b       cpu_resume_mmu
 ENDPROC(cpu_v6_do_resume)
-cpu_resume_l1_flags:
-        ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
-        ALT_UP(.long  PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
 #endif
 
         string  cpu_v6_name, "ARMv6-compatible processor"
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 9591c8e9fb8c..2c559ac38142 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -217,56 +217,50 @@ ENDPROC(cpu_v7_set_pte_ext)
 
 /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
 .globl  cpu_v7_suspend_size
-.equ    cpu_v7_suspend_size, 4 * 9
+.equ    cpu_v7_suspend_size, 4 * 7
 #ifdef CONFIG_ARM_CPU_SUSPEND
 ENTRY(cpu_v7_do_suspend)
-        stmfd   sp!, {r4 - r11, lr}
+        stmfd   sp!, {r4 - r10, lr}
         mrc     p15, 0, r4, c13, c0, 0  @ FCSE/PID
-        mrc     p15, 0, r5, c13, c0, 1  @ Context ID
-        mrc     p15, 0, r6, c13, c0, 3  @ User r/o thread ID
-        stmia   r0!, {r4 - r6}
+        mrc     p15, 0, r5, c13, c0, 3  @ User r/o thread ID
+        stmia   r0!, {r4 - r5}
         mrc     p15, 0, r6, c3, c0, 0   @ Domain ID
-        mrc     p15, 0, r7, c2, c0, 0   @ TTB 0
-        mrc     p15, 0, r8, c2, c0, 1   @ TTB 1
-        mrc     p15, 0, r9, c1, c0, 0   @ Control register
-        mrc     p15, 0, r10, c1, c0, 1  @ Auxiliary control register
-        mrc     p15, 0, r11, c1, c0, 2  @ Co-processor access control
-        stmia   r0, {r6 - r11}
-        ldmfd   sp!, {r4 - r11, pc}
+        mrc     p15, 0, r7, c2, c0, 1   @ TTB 1
+        mrc     p15, 0, r8, c1, c0, 0   @ Control register
+        mrc     p15, 0, r9, c1, c0, 1   @ Auxiliary control register
+        mrc     p15, 0, r10, c1, c0, 2  @ Co-processor access control
+        stmia   r0, {r6 - r10}
+        ldmfd   sp!, {r4 - r10, pc}
 ENDPROC(cpu_v7_do_suspend)
 
 ENTRY(cpu_v7_do_resume)
         mov     ip, #0
         mcr     p15, 0, ip, c8, c7, 0   @ invalidate TLBs
         mcr     p15, 0, ip, c7, c5, 0   @ invalidate I cache
-        ldmia   r0!, {r4 - r6}
+        mcr     p15, 0, ip, c13, c0, 1  @ set reserved context ID
+        ldmia   r0!, {r4 - r5}
         mcr     p15, 0, r4, c13, c0, 0  @ FCSE/PID
-        mcr     p15, 0, r5, c13, c0, 1  @ Context ID
-        mcr     p15, 0, r6, c13, c0, 3  @ User r/o thread ID
-        ldmia   r0, {r6 - r11}
+        mcr     p15, 0, r5, c13, c0, 3  @ User r/o thread ID
+        ldmia   r0, {r6 - r10}
         mcr     p15, 0, r6, c3, c0, 0   @ Domain ID
-        mcr     p15, 0, r7, c2, c0, 0   @ TTB 0
-        mcr     p15, 0, r8, c2, c0, 1   @ TTB 1
+        ALT_SMP(orr     r1, r1, #TTB_FLAGS_SMP)
+        ALT_UP(orr      r1, r1, #TTB_FLAGS_UP)
+        mcr     p15, 0, r1, c2, c0, 0   @ TTB 0
+        mcr     p15, 0, r7, c2, c0, 1   @ TTB 1
         mcr     p15, 0, ip, c2, c0, 2   @ TTB control register
         mrc     p15, 0, r4, c1, c0, 1   @ Read Auxiliary control register
-        teq     r4, r10                 @ Is it already set?
-        mcrne   p15, 0, r10, c1, c0, 1  @ No, so write it
-        mcr     p15, 0, r11, c1, c0, 2  @ Co-processor access control
+        teq     r4, r9                  @ Is it already set?
+        mcrne   p15, 0, r9, c1, c0, 1   @ No, so write it
+        mcr     p15, 0, r10, c1, c0, 2  @ Co-processor access control
         ldr     r4, =PRRR               @ PRRR
         ldr     r5, =NMRR               @ NMRR
         mcr     p15, 0, r4, c10, c2, 0  @ write PRRR
         mcr     p15, 0, r5, c10, c2, 1  @ write NMRR
         isb
         dsb
-        mov     r0, r9                  @ control register
-        mov     r2, r7, lsr #14         @ get TTB0 base
-        mov     r2, r2, lsl #14
-        ldr     r3, cpu_resume_l1_flags
+        mov     r0, r8                  @ control register
         b       cpu_resume_mmu
 ENDPROC(cpu_v7_do_resume)
-cpu_resume_l1_flags:
-        ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
-        ALT_UP(.long  PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
 #endif
 
         __CPUINIT
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 755e1bf22681..abf0507a08ae 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -406,24 +406,23 @@ ENTRY(cpu_xsc3_set_pte_ext)
         .align
 
 .globl  cpu_xsc3_suspend_size
-.equ    cpu_xsc3_suspend_size, 4 * 7
+.equ    cpu_xsc3_suspend_size, 4 * 6
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xsc3_do_suspend)
-        stmfd   sp!, {r4 - r10, lr}
+        stmfd   sp!, {r4 - r9, lr}
         mrc     p14, 0, r4, c6, c0, 0   @ clock configuration, for turbo mode
         mrc     p15, 0, r5, c15, c1, 0  @ CP access reg
         mrc     p15, 0, r6, c13, c0, 0  @ PID
         mrc     p15, 0, r7, c3, c0, 0   @ domain ID
-        mrc     p15, 0, r8, c2, c0, 0   @ translation table base addr
-        mrc     p15, 0, r9, c1, c0, 1   @ auxiliary control reg
-        mrc     p15, 0, r10, c1, c0, 0  @ control reg
+        mrc     p15, 0, r8, c1, c0, 1   @ auxiliary control reg
+        mrc     p15, 0, r9, c1, c0, 0   @ control reg
         bic     r4, r4, #2              @ clear frequency change bit
-        stmia   r0, {r4 - r10}          @ store cp regs
-        ldmia   sp!, {r4 - r10, pc}
+        stmia   r0, {r4 - r9}           @ store cp regs
+        ldmia   sp!, {r4 - r9, pc}
 ENDPROC(cpu_xsc3_do_suspend)
 
 ENTRY(cpu_xsc3_do_resume)
-        ldmia   r0, {r4 - r10}          @ load cp regs
+        ldmia   r0, {r4 - r9}           @ load cp regs
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0   @ invalidate I & D caches, BTB
         mcr     p15, 0, ip, c7, c10, 4  @ drain write (&fill) buffer
@@ -433,15 +432,10 @@ ENTRY(cpu_xsc3_do_resume)
         mcr     p15, 0, r5, c15, c1, 0  @ CP access reg
         mcr     p15, 0, r6, c13, c0, 0  @ PID
         mcr     p15, 0, r7, c3, c0, 0   @ domain ID
-        mcr     p15, 0, r8, c2, c0, 0   @ translation table base addr
-        mcr     p15, 0, r9, c1, c0, 1   @ auxiliary control reg
-
-        @ temporarily map resume_turn_on_mmu into the page table,
-        @ otherwise prefetch abort occurs after MMU is turned on
-        mov     r0, r10                 @ control register
-        mov     r2, r8, lsr #14         @ get TTB0 base
-        mov     r2, r2, lsl #14
-        ldr     r3, =0x542e             @ section flags
+        orr     r1, r1, #0x18           @ cache the page table in L2
+        mcr     p15, 0, r1, c2, c0, 0   @ translation table base addr
+        mcr     p15, 0, r8, c1, c0, 1   @ auxiliary control reg
+        mov     r0, r9                  @ control register
         b       cpu_resume_mmu
 ENDPROC(cpu_xsc3_do_resume)
 #endif
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index fbc06e55b87a..3277904bebaf 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -520,24 +520,23 @@ ENTRY(cpu_xscale_set_pte_ext)
         .align
 
 .globl  cpu_xscale_suspend_size
-.equ    cpu_xscale_suspend_size, 4 * 7
+.equ    cpu_xscale_suspend_size, 4 * 6
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xscale_do_suspend)
-        stmfd   sp!, {r4 - r10, lr}
+        stmfd   sp!, {r4 - r9, lr}
         mrc     p14, 0, r4, c6, c0, 0   @ clock configuration, for turbo mode
         mrc     p15, 0, r5, c15, c1, 0  @ CP access reg
         mrc     p15, 0, r6, c13, c0, 0  @ PID
         mrc     p15, 0, r7, c3, c0, 0   @ domain ID
-        mrc     p15, 0, r8, c2, c0, 0   @ translation table base addr
-        mrc     p15, 0, r9, c1, c1, 0   @ auxiliary control reg
-        mrc     p15, 0, r10, c1, c0, 0  @ control reg
+        mrc     p15, 0, r8, c1, c1, 0   @ auxiliary control reg
+        mrc     p15, 0, r9, c1, c0, 0   @ control reg
         bic     r4, r4, #2              @ clear frequency change bit
-        stmia   r0, {r4 - r10}          @ store cp regs
-        ldmfd   sp!, {r4 - r10, pc}
+        stmia   r0, {r4 - r9}           @ store cp regs
+        ldmfd   sp!, {r4 - r9, pc}
 ENDPROC(cpu_xscale_do_suspend)
 
 ENTRY(cpu_xscale_do_resume)
-        ldmia   r0, {r4 - r10}          @ load cp regs
+        ldmia   r0, {r4 - r9}           @ load cp regs
         mov     ip, #0
         mcr     p15, 0, ip, c8, c7, 0   @ invalidate I & D TLBs
         mcr     p15, 0, ip, c7, c7, 0   @ invalidate I & D caches, BTB
@@ -545,13 +544,9 @@ ENTRY(cpu_xscale_do_resume)
         mcr     p15, 0, r5, c15, c1, 0  @ CP access reg
         mcr     p15, 0, r6, c13, c0, 0  @ PID
         mcr     p15, 0, r7, c3, c0, 0   @ domain ID
-        mcr     p15, 0, r8, c2, c0, 0   @ translation table base addr
-        mcr     p15, 0, r9, c1, c1, 0   @ auxiliary control reg
-        mov     r0, r10                 @ control register
-        mov     r2, r8, lsr #14         @ get TTB0 base
-        mov     r2, r2, lsl #14
-        ldr     r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
-                     PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+        mcr     p15, 0, r1, c2, c0, 0   @ translation table base addr
+        mcr     p15, 0, r8, c1, c1, 0   @ auxiliary control reg
+        mov     r0, r9                  @ control register
         b       cpu_resume_mmu
 ENDPROC(cpu_xscale_do_resume)
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index e4dde91f0231..a3045937fc2f 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -54,7 +54,7 @@
 
 #define UART_VADDR      IMX_IO_ADDRESS(UART_PADDR)
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 ldr     \rp, =UART_PADDR        @ physical
                 ldr     \rv, =UART_VADDR        @ virtual
                 .endm
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
deleted file mode 100644
index 11be5cdbdd1a..000000000000
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MEMORY_H__
-#define __ASM_ARCH_MXC_MEMORY_H__
-
-#define MX1_PHYS_OFFSET         UL(0x08000000)
-#define MX21_PHYS_OFFSET        UL(0xc0000000)
-#define MX25_PHYS_OFFSET        UL(0x80000000)
-#define MX27_PHYS_OFFSET        UL(0xa0000000)
-#define MX3x_PHYS_OFFSET        UL(0x80000000)
-#define MX50_PHYS_OFFSET        UL(0x70000000)
-#define MX51_PHYS_OFFSET        UL(0x90000000)
-#define MX53_PHYS_OFFSET        UL(0x70000000)
-
-#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
-# if defined CONFIG_ARCH_MX1
-#  define PLAT_PHYS_OFFSET              MX1_PHYS_OFFSET
-# elif defined CONFIG_MACH_MX21
-#  define PLAT_PHYS_OFFSET              MX21_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX25
-#  define PLAT_PHYS_OFFSET              MX25_PHYS_OFFSET
-# elif defined CONFIG_MACH_MX27
-#  define PLAT_PHYS_OFFSET              MX27_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX3
-#  define PLAT_PHYS_OFFSET              MX3x_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX50
-#  define PLAT_PHYS_OFFSET              MX50_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX51
-#  define PLAT_PHYS_OFFSET              MX51_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX53
-#  define PLAT_PHYS_OFFSET              MX53_PHYS_OFFSET
-# endif
-#endif
-
-#if defined(CONFIG_MX3_VIDEO)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for mx3 camera driver to capture at least two QXGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */
-
-#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 5b605a9eb091..6f4edd3408c2 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -15,6 +15,7 @@ config ARCH_OMAP1
         select CLKSRC_MMIO
         select GENERIC_IRQ_CHIP
         select HAVE_IDE
+        select NEED_MACH_MEMORY_H
         help
           "Systems based on omap7xx, omap15xx or omap16xx"
 
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index d72ec85c97e6..ebe67ea8d068 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -309,6 +309,8 @@ extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
 void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
 void omap_iounmap(volatile void __iomem *addr);
 
+extern void __init omap_init_consistent_dma_size(void);
+
 #endif
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
deleted file mode 100644
index e6720aa2d553..000000000000
--- a/arch/arm/plat-omap/include/plat/memory.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/memory.h
- *
- * Memory map for OMAP-1510 and 1610
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#define PLAT_PHYS_OFFSET                UL(0x10000000)
-#else
-#define PLAT_PHYS_OFFSET                UL(0x80000000)
-#endif
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#ifdef CONFIG_ARCH_OMAP15XX
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET      UL(0x30000000)
-
-#define virt_to_lbus(x)         ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x)         ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)     (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-
-#define __arch_pfn_to_dma(dev, pfn)     \
-        ({ dma_addr_t __dma = __pfn_to_phys(pfn); \
-           if (is_lbus_device(dev)) \
-                __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
-           __dma; })
-
-#define __arch_dma_to_pfn(dev, addr)    \
-        ({ dma_addr_t __dma = addr;                             \
-           if (is_lbus_device(dev))                             \
-                __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;      \
-           __phys_to_pfn(__dma);                                \
-        })
-
-#define __arch_dma_to_virt(dev, addr)   ({ (void *) (is_lbus_device(dev) ? \
-                                                lbus_to_virt(addr) : \
-                                                __phys_to_virt(addr)); })
-
-#define __arch_virt_to_dma(dev, addr)   ({ unsigned long __addr = (unsigned long)(addr); \
-                                           (dma_addr_t) (is_lbus_device(dev) ? \
-                                                virt_to_lbus(__addr) : \
-                                                __virt_to_phys(__addr)); })
-
-#endif  /* CONFIG_ARCH_OMAP15XX */
-
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
-        (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index de3b10c18127..1ab9fd6abe6d 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -16,8 +16,8 @@
 #include <linux/init.h>
 
 /*
- * Memory entry used for the DEBUG_LL UART configuration. See also
- * uncompress.h and debug-macro.S.
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
  *
  * Note that using a memory location for storing the UART configuration
  * has at least two limitations:
@@ -27,7 +27,7 @@
  * 2. We assume printascii is called at least once before paging_init,
  *    and addruart has a chance to read OMAP_UART_INFO
  */
-#define OMAP_UART_INFO          (PLAT_PHYS_OFFSET + 0x3ffc)
+#define OMAP_UART_INFO_OFS      0x3ffc
 
 /* OMAP1 serial ports */
 #define OMAP1_UART1_BASE        0xfffb0000
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index a067484cc4a2..2f472e989ec6 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -36,7 +36,13 @@ int uart_shift;
  */
 static void set_omap_uart_info(unsigned char port)
 {
-        *(volatile u32 *)OMAP_UART_INFO = port;
+        /*
+         * Get address of some.bss variable and round it down
+         * a la CONFIG_AUTO_ZRELADDR.
+         */
+        u32 ram_start = (u32)&uart_shift & 0xf8000000;
+        u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+        *uart_info = port;
 }
 
 static void putc(int c)
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index f1ecfa9fc61d..e9b0e23edd0a 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/dma-mapping.h>
 
 #include <plat/omap7xx.h>
 #include <plat/omap1510.h>
@@ -139,3 +140,10 @@ void omap_iounmap(volatile void __iomem *addr)
                 __iounmap(addr);
 }
 EXPORT_SYMBOL(omap_iounmap);
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+        init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 8501bbf2c092..02b160a1ec9b 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -14,7 +14,7 @@
 #include <linux/amba/serial.h>
 #include <mach/hardware.h>
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 mov     \rp, #SPEAR_DBG_UART_BASE               @ Physical base
                 mov     \rv, #VA_SPEAR_DBG_UART_BASE            @ Virtual base
                 .endm
diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h
deleted file mode 100644
index 7e3599e1104e..000000000000
--- a/arch/arm/plat-spear/include/plat/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/memory.h
- *
- * Memory map for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_MEMORY_H
-#define __PLAT_MEMORY_H
-
-/* Physical DRAM offset */
-#define PLAT_PHYS_OFFSET                UL(0x00000000)
-
-#endif /* __PLAT_MEMORY_H */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
index 7662f736e42b..cf17d04ec30d 100644
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ b/arch/arm/plat-tcc/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
  *
  */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
                 moveq   \rp, #0x90000000        @ physical base address
                 movne   \rv, #0xF1000000        @ virtual base
                 orr     \rp, \rp, #0x00007000   @ UART0
diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h
deleted file mode 100644
index 28a6e0cd13b3..000000000000
--- a/arch/arm/plat-tcc/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET                UL(0x20000000)
-
-#endif
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 79bcb4316930..0cbd5a0a9332 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/cpu.h>
+#include <linux/cpu_pm.h>
 #include <linux/kernel.h>
 #include <linux/notifier.h>
 #include <linux/signal.h>
@@ -68,7 +69,7 @@ static bool vfp_state_in_hw(unsigned int cpu, struct thread_info *thread)
 /*
  * Force a reload of the VFP context from the thread structure.  We do
  * this by ensuring that access to the VFP hardware is disabled, and
- * clear last_VFP_context.  Must be called from non-preemptible context.
+ * clear vfp_current_hw_state.  Must be called from non-preemptible context.
  */
 static void vfp_force_reload(unsigned int cpu, struct thread_info *thread)
 {
@@ -436,9 +437,7 @@ static void vfp_enable(void *unused)
         set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
 }
 
-#ifdef CONFIG_PM
-#include <linux/syscore_ops.h>
-
+#ifdef CONFIG_CPU_PM
 static int vfp_pm_suspend(void)
 {
         struct thread_info *ti = current_thread_info();
@@ -468,19 +467,33 @@ static void vfp_pm_resume(void)
         fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
 }
 
-static struct syscore_ops vfp_pm_syscore_ops = {
-        .suspend        = vfp_pm_suspend,
-        .resume         = vfp_pm_resume,
+static int vfp_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd,
+        void *v)
+{
+        switch (cmd) {
+        case CPU_PM_ENTER:
+                vfp_pm_suspend();
+                break;
+        case CPU_PM_ENTER_FAILED:
+        case CPU_PM_EXIT:
+                vfp_pm_resume();
+                break;
+        }
+        return NOTIFY_OK;
+}
+
+static struct notifier_block vfp_cpu_pm_notifier_block = {
+        .notifier_call = vfp_cpu_pm_notifier,
 };
 
 static void vfp_pm_init(void)
 {
-        register_syscore_ops(&vfp_pm_syscore_ops);
+        cpu_pm_register_notifier(&vfp_cpu_pm_notifier_block);
 }
 
 #else
 static inline void vfp_pm_init(void) { }
-#endif /* CONFIG_PM */
+#endif /* CONFIG_CPU_PM */
 
 /*
  * Ensure that the VFP state stored in 'thread->vfpstate' is up to date
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index b0176e4569e0..61f4ee466df7 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -41,12 +41,6 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
-#ifdef  CONFIG_ARM
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/mach-types.h>
-#endif
-
 #include <asm/uaccess.h>
 
 #include "musb_core.h"
diff --git a/include/linux/cpu_pm.h b/include/linux/cpu_pm.h
new file mode 100644
index 000000000000..455b233dd3b1
--- /dev/null
+++ b/include/linux/cpu_pm.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ *      Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_CPU_PM_H
+#define _LINUX_CPU_PM_H
+
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+
+/*
+ * When a CPU goes to a low power state that turns off power to the CPU's
+ * power domain, the contents of some blocks (floating point coprocessors,
+ * interrupt controllers, caches, timers) in the same power domain can
+ * be lost.  The cpm_pm notifiers provide a method for platform idle, suspend,
+ * and hotplug implementations to notify the drivers for these blocks that
+ * they may be reset.
+ *
+ * All cpu_pm notifications must be called with interrupts disabled.
+ *
+ * The notifications are split into two classes: CPU notifications and CPU
+ * cluster notifications.
+ *
+ * CPU notifications apply to a single CPU and must be called on the affected
+ * CPU.  They are used to save per-cpu context for affected blocks.
+ *
+ * CPU cluster notifications apply to all CPUs in a single power domain. They
+ * are used to save any global context for affected blocks, and must be called
+ * after all the CPUs in the power domain have been notified of the low power
+ * state.
+ */
+
+/*
+ * Event codes passed as unsigned long val to notifier calls
+ */
+enum cpu_pm_event {
+        /* A single cpu is entering a low power state */
+        CPU_PM_ENTER,
+
+        /* A single cpu failed to enter a low power state */
+        CPU_PM_ENTER_FAILED,
+
+        /* A single cpu is exiting a low power state */
+        CPU_PM_EXIT,
+
+        /* A cpu power domain is entering a low power state */
+        CPU_CLUSTER_PM_ENTER,
+
+        /* A cpu power domain failed to enter a low power state */
+        CPU_CLUSTER_PM_ENTER_FAILED,
+
+        /* A cpu power domain is exiting a low power state */
+        CPU_CLUSTER_PM_EXIT,
+};
+
+#ifdef CONFIG_CPU_PM
+int cpu_pm_register_notifier(struct notifier_block *nb);
+int cpu_pm_unregister_notifier(struct notifier_block *nb);
+int cpu_pm_enter(void);
+int cpu_pm_exit(void);
+int cpu_cluster_pm_enter(void);
+int cpu_cluster_pm_exit(void);
+
+#else
+
+static inline int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+        return 0;
+}
+
+static inline int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+        return 0;
+}
+
+static inline int cpu_pm_enter(void)
+{
+        return 0;
+}
+
+static inline int cpu_pm_exit(void)
+{
+        return 0;
+}
+
+static inline int cpu_cluster_pm_enter(void)
+{
+        return 0;
+}
+
+static inline int cpu_cluster_pm_exit(void)
+{
+        return 0;
+}
+#endif
+#endif
diff --git a/kernel/Makefile b/kernel/Makefile
index 2da48d3515eb..e898c5b9d02c 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_RING_BUFFER) += trace/
 obj-$(CONFIG_TRACEPOINTS) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
 obj-$(CONFIG_IRQ_WORK) += irq_work.o
+obj-$(CONFIG_CPU_PM) += cpu_pm.o
 
 obj-$(CONFIG_PERF_EVENTS) += events/
 
diff --git a/kernel/cpu_pm.c b/kernel/cpu_pm.c
new file mode 100644
index 000000000000..249152e15308
--- /dev/null
+++ b/kernel/cpu_pm.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ *      Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpu_pm.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+
+static DEFINE_RWLOCK(cpu_pm_notifier_lock);
+static RAW_NOTIFIER_HEAD(cpu_pm_notifier_chain);
+
+static int cpu_pm_notify(enum cpu_pm_event event, int nr_to_call, int *nr_calls)
+{
+        int ret;
+
+        ret = __raw_notifier_call_chain(&cpu_pm_notifier_chain, event, NULL,
+                nr_to_call, nr_calls);
+
+        return notifier_to_errno(ret);
+}
+
+/**
+ * cpu_pm_register_notifier - register a driver with cpu_pm
+ * @nb: notifier block to register
+ *
+ * Add a driver to a list of drivers that are notified about
+ * CPU and CPU cluster low power entry and exit.
+ *
+ * This function may sleep, and has the same return conditions as
+ * raw_notifier_chain_register.
+ */
+int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+        unsigned long flags;
+        int ret;
+
+        write_lock_irqsave(&cpu_pm_notifier_lock, flags);
+        ret = raw_notifier_chain_register(&cpu_pm_notifier_chain, nb);
+        write_unlock_irqrestore(&cpu_pm_notifier_lock, flags);
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_register_notifier);
+
+/**
+ * cpu_pm_unregister_notifier - unregister a driver with cpu_pm
+ * @nb: notifier block to be unregistered
+ *
+ * Remove a driver from the CPU PM notifier list.
+ *
+ * This function may sleep, and has the same return conditions as
+ * raw_notifier_chain_unregister.
+ */
+int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+        unsigned long flags;
+        int ret;
+
+        write_lock_irqsave(&cpu_pm_notifier_lock, flags);
+        ret = raw_notifier_chain_unregister(&cpu_pm_notifier_chain, nb);
+        write_unlock_irqrestore(&cpu_pm_notifier_lock, flags);
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_unregister_notifier);
+
+/**
+ * cpm_pm_enter - CPU low power entry notifier
+ *
+ * Notifies listeners that a single CPU is entering a low power state that may
+ * cause some blocks in the same power domain as the cpu to reset.
+ *
+ * Must be called on the affected CPU with interrupts disabled.  Platform is
+ * responsible for ensuring that cpu_pm_enter is not called twice on the same
+ * CPU before cpu_pm_exit is called. Notified drivers can include VFP
+ * co-processor, interrupt controller and it's PM extensions, local CPU
+ * timers context save/restore which shouldn't be interrupted. Hence it
+ * must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_pm_enter(void)
+{
+        int nr_calls;
+        int ret = 0;
+
+        read_lock(&cpu_pm_notifier_lock);
+        ret = cpu_pm_notify(CPU_PM_ENTER, -1, &nr_calls);
+        if (ret)
+                /*
+                 * Inform listeners (nr_calls - 1) about failure of CPU PM
+                 * PM entry who are notified earlier to prepare for it.
+                 */
+                cpu_pm_notify(CPU_PM_ENTER_FAILED, nr_calls - 1, NULL);
+        read_unlock(&cpu_pm_notifier_lock);
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_enter);
+
+/**
+ * cpm_pm_exit - CPU low power exit notifier
+ *
+ * Notifies listeners that a single CPU is exiting a low power state that may
+ * have caused some blocks in the same power domain as the cpu to reset.
+ *
+ * Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_pm_exit(void)
+{
+        int ret;
+
+        read_lock(&cpu_pm_notifier_lock);
+        ret = cpu_pm_notify(CPU_PM_EXIT, -1, NULL);
+        read_unlock(&cpu_pm_notifier_lock);
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_exit);
+
+/**
+ * cpm_cluster_pm_enter - CPU cluster low power entry notifier
+ *
+ * Notifies listeners that all cpus in a power domain are entering a low power
+ * state that may cause some blocks in the same power domain to reset.
+ *
+ * Must be called after cpu_pm_enter has been called on all cpus in the power
+ * domain, and before cpu_pm_exit has been called on any cpu in the power
+ * domain. Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_cluster_pm_enter(void)
+{
+        int nr_calls;
+        int ret = 0;
+
+        read_lock(&cpu_pm_notifier_lock);
+        ret = cpu_pm_notify(CPU_CLUSTER_PM_ENTER, -1, &nr_calls);
+        if (ret)
+                /*
+                 * Inform listeners (nr_calls - 1) about failure of CPU cluster
+                 * PM entry who are notified earlier to prepare for it.
+                 */
+                cpu_pm_notify(CPU_CLUSTER_PM_ENTER_FAILED, nr_calls - 1, NULL);
+        read_unlock(&cpu_pm_notifier_lock);
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_cluster_pm_enter);
+
+/**
+ * cpm_cluster_pm_exit - CPU cluster low power exit notifier
+ *
+ * Notifies listeners that all cpus in a power domain are exiting form a
+ * low power state that may have caused some blocks in the same power domain
+ * to reset.
+ *
+ * Must be called after cpu_pm_exit has been called on all cpus in the power
+ * domain, and before cpu_pm_exit has been called on any cpu in the power
+ * domain. Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_cluster_pm_exit(void)
+{
+        int ret;
+
+        read_lock(&cpu_pm_notifier_lock);
+        ret = cpu_pm_notify(CPU_CLUSTER_PM_EXIT, -1, NULL);
+        read_unlock(&cpu_pm_notifier_lock);
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_cluster_pm_exit);
+
+#ifdef CONFIG_PM
+static int cpu_pm_suspend(void)
+{
+        int ret;
+
+        ret = cpu_pm_enter();
+        if (ret)
+                return ret;
+
+        ret = cpu_cluster_pm_enter();
+        return ret;
+}
+
+static void cpu_pm_resume(void)
+{
+        cpu_cluster_pm_exit();
+        cpu_pm_exit();
+}
+
+static struct syscore_ops cpu_pm_syscore_ops = {
+        .suspend = cpu_pm_suspend,
+        .resume = cpu_pm_resume,
+};
+
+static int cpu_pm_init(void)
+{
+        register_syscore_ops(&cpu_pm_syscore_ops);
+        return 0;
+}
+core_initcall(cpu_pm_init);
+#endif
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index cedd9982306a..deb5461e3216 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -239,3 +239,7 @@ config PM_GENERIC_DOMAINS
 config PM_GENERIC_DOMAINS_RUNTIME
         def_bool y
         depends on PM_RUNTIME && PM_GENERIC_DOMAINS
+
+config CPU_PM
+        bool
+        depends on SUSPEND || CPU_IDLE