can: flexcan: use correct clock as base for bit rate calculation

The flexcan IP core uses the peripheral clock ("per") as basic clock for the
bit timing calculation. However the driver uses the the wrong clock ("ipg").
This leads to wrong bit rates if the rates on both clock are different.

This patch fixes the problem by using the correct clock for the bit rate
calculation.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index ae08cf129ebb..aaed97bee471 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1020,13 +1020,13 @@ static int flexcan_probe(struct platform_device *pdev)
                         dev_err(&pdev->dev, "no ipg clock defined\n");
                         return PTR_ERR(clk_ipg);
                 }
-                clock_freq = clk_get_rate(clk_ipg);
 
                 clk_per = devm_clk_get(&pdev->dev, "per");
                 if (IS_ERR(clk_per)) {
                         dev_err(&pdev->dev, "no per clock defined\n");
                         return PTR_ERR(clk_per);
                 }
+                clock_freq = clk_get_rate(clk_per);
         }
 
         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);