mtip32xx: Make SGL container per-command to eliminate high order dma allocation

The mtip32xx driver makes a high order dma memory allocation to store a
command index table, some dedicated buffers, and a command header & SGL
blob.  This allocation can fail with a surprise insert under low &
fragmented memory conditions.

This patch breaks these regions up into separate low order allocations
and increases the maximum number of segments a single command SGL can
have.  We wanted to allow at least 256 segments for 1 MB direct IO.
Since the command header occupies the first 0x80 bytes of the SGL blob,
that meant we needed two 4k pages to contain the header and SGL.  The
two pages allow up to 504 SGL segments.

Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

2 files changed, 149 insertions, 97 deletions

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 52b2f2a71470..966b4371a30f 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -41,10 +41,31 @@
 #include "mtip32xx.h"
 
 #define HW_CMD_SLOT_SZ          (MTIP_MAX_COMMAND_SLOTS * 32)
-#define HW_CMD_TBL_SZ           (AHCI_CMD_TBL_HDR_SZ + (MTIP_MAX_SG * 16))
-#define HW_CMD_TBL_AR_SZ        (HW_CMD_TBL_SZ * MTIP_MAX_COMMAND_SLOTS)
-#define HW_PORT_PRIV_DMA_SZ \
-                (HW_CMD_SLOT_SZ + HW_CMD_TBL_AR_SZ + AHCI_RX_FIS_SZ)
+
+/* DMA region containing RX Fis, Identify, RLE10, and SMART buffers */
+#define AHCI_RX_FIS_SZ          0x100
+#define AHCI_RX_FIS_OFFSET      0x0
+#define AHCI_IDFY_SZ            ATA_SECT_SIZE
+#define AHCI_IDFY_OFFSET        0x400
+#define AHCI_SECTBUF_SZ         ATA_SECT_SIZE
+#define AHCI_SECTBUF_OFFSET     0x800
+#define AHCI_SMARTBUF_SZ        ATA_SECT_SIZE
+#define AHCI_SMARTBUF_OFFSET    0xC00
+/* 0x100 + 0x200 + 0x200 + 0x200 is smaller than 4k but we pad it out */
+#define BLOCK_DMA_ALLOC_SZ      4096
+
+/* DMA region containing command table (should be 8192 bytes) */
+#define AHCI_CMD_SLOT_SZ        sizeof(struct mtip_cmd_hdr)
+#define AHCI_CMD_TBL_SZ         (MTIP_MAX_COMMAND_SLOTS * AHCI_CMD_SLOT_SZ)
+#define AHCI_CMD_TBL_OFFSET     0x0
+
+/* DMA region per command (contains header and SGL) */
+#define AHCI_CMD_TBL_HDR_SZ     0x80
+#define AHCI_CMD_TBL_HDR_OFFSET 0x0
+#define AHCI_CMD_TBL_SGL_SZ     (MTIP_MAX_SG * sizeof(struct mtip_cmd_sg))
+#define AHCI_CMD_TBL_SGL_OFFSET AHCI_CMD_TBL_HDR_SZ
+#define CMD_DMA_ALLOC_SZ        (AHCI_CMD_TBL_SGL_SZ + AHCI_CMD_TBL_HDR_SZ)
+
 
 #define HOST_CAP_NZDMA          (1 << 19)
 #define HOST_HSORG              0xFC
@@ -3313,6 +3334,118 @@ st_out:
 }
 
 /*
+ * DMA region teardown
+ *
+ * @dd Pointer to driver_data structure
+ *
+ * return value
+ *      None
+ */
+static void mtip_dma_free(struct driver_data *dd)
+{
+        int i;
+        struct mtip_port *port = dd->port;
+
+        if (port->block1)
+                dmam_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ,
+                                        port->block1, port->block1_dma);
+
+        if (port->command_list) {
+                dmam_free_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ,
+                                port->command_list, port->command_list_dma);
+        }
+
+        for (i = 0; i < MTIP_MAX_COMMAND_SLOTS; i++) {
+                if (port->commands[i].command)
+                        dmam_free_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ,
+                                port->commands[i].command,
+                                port->commands[i].command_dma);
+        }
+}
+
+/*
+ * DMA region setup
+ *
+ * @dd Pointer to driver_data structure
+ *
+ * return value
+ *      -ENOMEM Not enough free DMA region space to initialize driver
+ */
+static int mtip_dma_alloc(struct driver_data *dd)
+{
+        struct mtip_port *port = dd->port;
+        int i, rv = 0;
+        u32 host_cap_64 = readl(dd->mmio + HOST_CAP) & HOST_CAP_64;
+
+        /* Allocate dma memory for RX Fis, Identify, and Sector Bufffer */
+        port->block1 =
+                dmam_alloc_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ,
+                                        &port->block1_dma, GFP_KERNEL);
+        if (!port->block1)
+                return -ENOMEM;
+        memset(port->block1, 0, BLOCK_DMA_ALLOC_SZ);
+
+        /* Allocate dma memory for command list */
+        port->command_list =
+                dmam_alloc_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ,
+                                        &port->command_list_dma, GFP_KERNEL);
+        if (!port->command_list) {
+                dmam_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ,
+                                        port->block1, port->block1_dma);
+                port->block1 = NULL;
+                port->block1_dma = 0;
+                return -ENOMEM;
+        }
+        memset(port->command_list, 0, AHCI_CMD_TBL_SZ);
+
+        /* Setup all pointers into first DMA region */
+        port->rxfis         = port->block1 + AHCI_RX_FIS_OFFSET;
+        port->rxfis_dma     = port->block1_dma + AHCI_RX_FIS_OFFSET;
+        port->identify      = port->block1 + AHCI_IDFY_OFFSET;
+        port->identify_dma  = port->block1_dma + AHCI_IDFY_OFFSET;
+        port->log_buf       = port->block1 + AHCI_SECTBUF_OFFSET;
+        port->log_buf_dma   = port->block1_dma + AHCI_SECTBUF_OFFSET;
+        port->smart_buf     = port->block1 + AHCI_SMARTBUF_OFFSET;
+        port->smart_buf_dma = port->block1_dma + AHCI_SMARTBUF_OFFSET;
+
+        /* Setup per command SGL DMA region */
+
+        /* Point the command headers at the command tables */
+        for (i = 0; i < MTIP_MAX_COMMAND_SLOTS; i++) {
+                port->commands[i].command =
+                        dmam_alloc_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ,
+                                &port->commands[i].command_dma, GFP_KERNEL);
+                if (!port->commands[i].command) {
+                        rv = -ENOMEM;
+                        mtip_dma_free(dd);
+                        return rv;
+                }
+                memset(port->commands[i].command, 0, CMD_DMA_ALLOC_SZ);
+
+                port->commands[i].command_header = port->command_list +
+                                        (sizeof(struct mtip_cmd_hdr) * i);
+                port->commands[i].command_header_dma =
+                                        dd->port->command_list_dma +
+                                        (sizeof(struct mtip_cmd_hdr) * i);
+
+                if (host_cap_64)
+                        port->commands[i].command_header->ctbau =
+                                __force_bit2int cpu_to_le32(
+                                (port->commands[i].command_dma >> 16) >> 16);
+
+                port->commands[i].command_header->ctba =
+                                __force_bit2int cpu_to_le32(
+                                port->commands[i].command_dma & 0xFFFFFFFF);
+
+                sg_init_table(port->commands[i].sg, MTIP_MAX_SG);
+
+                /* Mark command as currently inactive */
+                atomic_set(&dd->port->commands[i].active, 0);
+        }
+        return 0;
+}
+
+/*
  * Called once for each card.
  *
  * @dd Pointer to the driver data structure.
@@ -3370,83 +3503,10 @@ static int mtip_hw_init(struct driver_data *dd)
         dd->port->mmio  = dd->mmio + PORT_OFFSET;
         dd->port->dd    = dd;
 
-        /* Allocate memory for the command list. */
-        dd->port->command_list =
-                dmam_alloc_coherent(&dd->pdev->dev,
-                        HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
-                        &dd->port->command_list_dma,
-                        GFP_KERNEL);
-        if (!dd->port->command_list) {
-                dev_err(&dd->pdev->dev,
-                        "Memory allocation: command list\n");
-                rv = -ENOMEM;
+        /* DMA allocations */
+        rv = mtip_dma_alloc(dd);
+        if (rv < 0)
                 goto out1;
-        }
-
-        /* Clear the memory we have allocated. */
-        memset(dd->port->command_list,
-                0,
-                HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4));
-
-        /* Setup the addresse of the RX FIS. */
-        dd->port->rxfis     = dd->port->command_list + HW_CMD_SLOT_SZ;
-        dd->port->rxfis_dma = dd->port->command_list_dma + HW_CMD_SLOT_SZ;
-
-        /* Setup the address of the command tables. */
-        dd->port->command_table   = dd->port->rxfis + AHCI_RX_FIS_SZ;
-        dd->port->command_tbl_dma = dd->port->rxfis_dma + AHCI_RX_FIS_SZ;
-
-        /* Setup the address of the identify data. */
-        dd->port->identify     = dd->port->command_table +
-                                        HW_CMD_TBL_AR_SZ;
-        dd->port->identify_dma = dd->port->command_tbl_dma +
-                                        HW_CMD_TBL_AR_SZ;
-
-        /* Setup the address of the sector buffer - for some non-ncq cmds */
-        dd->port->sector_buffer = (void *) dd->port->identify + ATA_SECT_SIZE;
-        dd->port->sector_buffer_dma = dd->port->identify_dma + ATA_SECT_SIZE;
-
-        /* Setup the address of the log buf - for read log command */
-        dd->port->log_buf = (void *)dd->port->sector_buffer  + ATA_SECT_SIZE;
-        dd->port->log_buf_dma = dd->port->sector_buffer_dma + ATA_SECT_SIZE;
-
-        /* Setup the address of the smart buf - for smart read data command */
-        dd->port->smart_buf = (void *)dd->port->log_buf  + ATA_SECT_SIZE;
-        dd->port->smart_buf_dma = dd->port->log_buf_dma + ATA_SECT_SIZE;
-
-
-        /* Point the command headers at the command tables. */
-        for (i = 0; i < num_command_slots; i++) {
-                dd->port->commands[i].command_header =
-                                        dd->port->command_list +
-                                        (sizeof(struct mtip_cmd_hdr) * i);
-                dd->port->commands[i].command_header_dma =
-                                        dd->port->command_list_dma +
-                                        (sizeof(struct mtip_cmd_hdr) * i);
-
-                dd->port->commands[i].command =
-                        dd->port->command_table + (HW_CMD_TBL_SZ * i);
-                dd->port->commands[i].command_dma =
-                        dd->port->command_tbl_dma + (HW_CMD_TBL_SZ * i);
-
-                if (readl(dd->mmio + HOST_CAP) & HOST_CAP_64)
-                        dd->port->commands[i].command_header->ctbau =
-                        __force_bit2int cpu_to_le32(
-                        (dd->port->commands[i].command_dma >> 16) >> 16);
-                dd->port->commands[i].command_header->ctba =
-                        __force_bit2int cpu_to_le32(
-                        dd->port->commands[i].command_dma & 0xFFFFFFFF);
-
-                /*
-                 * If this is not done, a bug is reported by the stock
-                 * FC11 i386. Due to the fact that it has lots of kernel
-                 * debugging enabled.
-                 */
-                sg_init_table(dd->port->commands[i].sg, MTIP_MAX_SG);
-
-                /* Mark all commands as currently inactive.*/
-                atomic_set(&dd->port->commands[i].active, 0);
-        }
 
         /* Setup the pointers to the extended s_active and CI registers. */
         for (i = 0; i < dd->slot_groups; i++) {
@@ -3594,12 +3654,8 @@ out3:
 
 out2:
         mtip_deinit_port(dd->port);
+        mtip_dma_free(dd);
 
-        /* Free the command/command header memory. */
-        dmam_free_coherent(&dd->pdev->dev,
-                                HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
-                                dd->port->command_list,
-                                dd->port->command_list_dma);
 out1:
         /* Free the memory allocated for the for structure. */
         kfree(dd->port);
@@ -3641,11 +3697,9 @@ static int mtip_hw_exit(struct driver_data *dd)
         irq_set_affinity_hint(dd->pdev->irq, NULL);
         devm_free_irq(&dd->pdev->dev, dd->pdev->irq, dd);
 
-        /* Free the command/command header memory. */
-        dmam_free_coherent(&dd->pdev->dev,
-                        HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
-                        dd->port->command_list,
-                        dd->port->command_list_dma);
+        /* Free dma regions */
+        mtip_dma_free(dd);
+
         /* Free the memory allocated for the for structure. */
         kfree(dd->port);
         dd->port = NULL;
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index 9be7a1582ad3..bda35d97246a 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -69,7 +69,7 @@
  * Maximum number of scatter gather entries
  * a single command may have.
  */
-#define MTIP_MAX_SG             128
+#define MTIP_MAX_SG             504
 
 /*
  * Maximum number of slot groups (Command Issue & s_active registers)
@@ -391,15 +391,13 @@ struct mtip_port {
          */
         dma_addr_t rxfis_dma;
         /*
-         * Pointer to the beginning of the command table memory as used
-         * by the driver.
+         * Pointer to the DMA region for RX Fis, Identify, RLE10, and SMART
          */
-        void *command_table;
+        void *block1;
         /*
-         * Pointer to the beginning of the command table memory as used
-         * by the DMA.
+         * DMA address of region for RX Fis, Identify, RLE10, and SMART
          */
-        dma_addr_t command_tbl_dma;
+        dma_addr_t block1_dma;
         /*
          * Pointer to the beginning of the identify data memory as used
          * by the driver.