ARM: omap3-n900.dts: add display information

Add DT data for OMAP3 N900 board. The board has the following displays:

lcd: LCD panel connected to OMAP's SDI output
tv: analog svideo

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sre@debian.org>
Acked-by: Tony Lindgren <tony@atomide.com>

1 files changed, 73 insertions, 4 deletions

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 64aa416ee4c1..6311393bf5a9 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -79,6 +79,17 @@
                 nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
                 usb-phy = <&usb2_phy>;
         };
+
+        tv: connector {
+                compatible = "composite-connector";
+                label = "tv";
+
+                port {
+                        tv_connector_in: endpoint {
+                                remote-endpoint = <&venc_out>;
+                        };
+                };
+        };
 };
 
 &omap3_pmx_core {
@@ -145,11 +156,23 @@
                 >;
         };
 
-        display_pins: pinmux_display_pins {
+        acx565akm_pins: pinmux_acx565akm_pins {
                 pinctrl-single,pins = <
                         0x0d4 (PIN_OUTPUT | MUX_MODE4)          /* RX51_LCD_RESET_GPIO */
                 >;
         };
+
+        dss_sdi_pins: pinmux_dss_sdi_pins {
+                pinctrl-single,pins = <
+                        0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
+                        0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
+                        0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
+                        0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
+
+                        0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
+                        0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
+                >;
+        };
 };
 
 &i2c1 {
@@ -561,13 +584,23 @@
                 spi-max-frequency = <6000000>;
                 reg = <0>;
         };
-        mipid@2 {
-                compatible = "acx565akm";
+
+        acx565akm@2 {
+                compatible = "sony,acx565akm";
                 spi-max-frequency = <6000000>;
                 reg = <2>;
 
                 pinctrl-names = "default";
-                pinctrl-0 = <&display_pins>;
+                pinctrl-0 = <&acx565akm_pins>;
+
+                label = "lcd";
+                reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+                port {
+                        lcd_in: endpoint {
+                                remote-endpoint = <&sdi_out>;
+                        };
+                };
         };
 };
 
@@ -593,3 +626,39 @@
         pinctrl-names = "default";
         pinctrl-0 = <&uart3_pins>;
 };
+
+&dss {
+        status = "ok";
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&dss_sdi_pins>;
+
+        vdds_sdi-supply = <&vaux1>;
+
+        ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                        reg = <1>;
+
+                        sdi_out: endpoint {
+                                remote-endpoint = <&lcd_in>;
+                                datapairs = <2>;
+                        };
+                };
+        };
+};
+
+&venc {
+        status = "ok";
+
+        vdda-supply = <&vdac>;
+
+        port {
+                venc_out: endpoint {
+                        remote-endpoint = <&tv_connector_in>;
+                        ti,channels = <1>;
+                };
+        };
+};