mfd: 88pm80x: Change chip id definition and detection

Change the chip id definition and detection and then:

1. We no longer need to add PM800_CHIP_XXX for the coming revision.
2. We no longer need to pass driver_data in i2c_device_id as we
   can distinguish the chips from the CHIP_ID register.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

4 files changed, 51 insertions, 61 deletions

diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index 4ebb2e215bac..2c0b4155181f 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -28,8 +28,6 @@
 #include <linux/mfd/88pm80x.h>
 #include <linux/slab.h>
 
-#define PM800_CHIP_ID                   (0x00)
-
 /* Interrupt Registers */
 #define PM800_INT_STATUS1               (0x05)
 #define PM800_ONKEY_INT_STS1            (1 << 0)
@@ -114,20 +112,11 @@ enum {
         PM800_MAX_IRQ,
 };
 
-enum {
-        /* Procida */
-        PM800_CHIP_A0  = 0x60,
-        PM800_CHIP_A1  = 0x61,
-        PM800_CHIP_B0  = 0x62,
-        PM800_CHIP_C0  = 0x63,
-        PM800_CHIP_END = PM800_CHIP_C0,
-
-        /* Make sure to update this to the last stepping */
-        PM8XXX_CHIP_END = PM800_CHIP_END
-};
+/* PM800: generation identification number */
+#define PM800_CHIP_GEN_ID_NUM   0x3
 
 static const struct i2c_device_id pm80x_id_table[] = {
-        {"88PM800", CHIP_PM800},
+        {"88PM800", 0},
         {} /* NULL terminated */
 };
 MODULE_DEVICE_TABLE(i2c, pm80x_id_table);
@@ -434,28 +423,9 @@ static void pm800_pages_exit(struct pm80x_chip *chip)
 static int device_800_init(struct pm80x_chip *chip,
                                      struct pm80x_platform_data *pdata)
 {
-        int ret, pmic_id;
+        int ret;
         unsigned int val;
 
-        ret = regmap_read(chip->regmap, PM800_CHIP_ID, &val);
-        if (ret < 0) {
-                dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
-                goto out;
-        }
-
-        pmic_id = val & PM80X_VERSION_MASK;
-
-        if ((pmic_id >= PM800_CHIP_A0) && (pmic_id <= PM800_CHIP_END)) {
-                chip->version = val;
-                dev_info(chip->dev,
-                         "88PM80x:Marvell 88PM800 (ID:0x%x) detected\n", val);
-        } else {
-                dev_err(chip->dev,
-                        "Failed to detect Marvell 88PM800:ChipID[0x%x]\n", val);
-                ret = -EINVAL;
-                goto out;
-        }
-
         /*
          * alarm wake up bit will be clear in device_irq_init(),
          * read before that
@@ -523,7 +493,7 @@ static int pm800_probe(struct i2c_client *client,
         struct pm80x_platform_data *pdata = client->dev.platform_data;
         struct pm80x_subchip *subchip;
 
-        ret = pm80x_init(client, id);
+        ret = pm80x_init(client);
         if (ret) {
                 dev_err(&client->dev, "pm800_init fail\n");
                 goto out_init;
@@ -553,7 +523,7 @@ static int pm800_probe(struct i2c_client *client,
 
         ret = device_800_init(chip, pdata);
         if (ret) {
-                dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id);
+                dev_err(chip->dev, "Failed to initialize 88pm800 devices\n");
                 goto err_device_init;
         }
 
diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c
index 0e82c2a1e842..521602231c7b 100644
--- a/drivers/mfd/88pm805.c
+++ b/drivers/mfd/88pm805.c
@@ -29,10 +29,8 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 
-#define PM805_CHIP_ID                   (0x00)
-
 static const struct i2c_device_id pm80x_id_table[] = {
-        {"88PM805", CHIP_PM805},
+        {"88PM805", 0},
         {} /* NULL terminated */
 };
 MODULE_DEVICE_TABLE(i2c, pm80x_id_table);
@@ -192,7 +190,6 @@ static struct regmap_irq_chip pm805_irq_chip = {
 static int device_805_init(struct pm80x_chip *chip)
 {
         int ret = 0;
-        unsigned int val;
         struct regmap *map = chip->regmap;
 
         if (!map) {
@@ -200,13 +197,6 @@ static int device_805_init(struct pm80x_chip *chip)
                 return -EINVAL;
         }
 
-        ret = regmap_read(map, PM805_CHIP_ID, &val);
-        if (ret < 0) {
-                dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
-                goto out_irq_init;
-        }
-        chip->version = val;
-
         chip->regmap_irq_chip = &pm805_irq_chip;
 
         ret = device_irq_init_805(chip);
@@ -239,7 +229,7 @@ static int pm805_probe(struct i2c_client *client,
         struct pm80x_chip *chip;
         struct pm80x_platform_data *pdata = client->dev.platform_data;
 
-        ret = pm80x_init(client, id);
+        ret = pm80x_init(client);
         if (ret) {
                 dev_err(&client->dev, "pm805_init fail!\n");
                 goto out_init;
@@ -249,7 +239,7 @@ static int pm805_probe(struct i2c_client *client,
 
         ret = device_805_init(chip);
         if (ret) {
-                dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id);
+                dev_err(chip->dev, "Failed to initialize 88pm805 devices\n");
                 goto err_805_init;
         }
 
diff --git a/drivers/mfd/88pm80x.c b/drivers/mfd/88pm80x.c
index f736a46eb8c0..5e72f65ef94c 100644
--- a/drivers/mfd/88pm80x.c
+++ b/drivers/mfd/88pm80x.c
@@ -18,6 +18,23 @@
 #include <linux/uaccess.h>
 #include <linux/err.h>
 
+/* 88pm80x chips have same definition for chip id register. */
+#define PM80X_CHIP_ID                   (0x00)
+#define PM80X_CHIP_ID_NUM(x)            (((x) >> 5) & 0x7)
+#define PM80X_CHIP_ID_REVISION(x)       ((x) & 0x1F)
+
+struct pm80x_chip_mapping {
+        unsigned int    id;
+        int             type;
+};
+
+static struct pm80x_chip_mapping chip_mapping[] = {
+        /* 88PM800 chip id number */
+        {0x3,   CHIP_PM800},
+        /* 88PM805 chip id number */
+        {0x0,   CHIP_PM805},
+};
+
 /*
  * workaround: some registers needed by pm805 are defined in pm800, so
  * need to use this global variable to maintain the relation between
@@ -31,12 +48,13 @@ const struct regmap_config pm80x_regmap_config = {
 };
 EXPORT_SYMBOL_GPL(pm80x_regmap_config);