/*
* Copyright (c) 2006,2007 Daniel Mack, Tim Ruetz
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/spinlock.h>
#include <sound/driver.h>
#include <sound/core.h>
#include <sound/rawmidi.h>
#include <sound/pcm.h>
#include "caiaq-device.h"
#include "caiaq-input.h"
#ifdef CONFIG_SND_USB_CAIAQ_INPUT
static unsigned char keycode_ak1[] = { KEY_C, KEY_B, KEY_A };
static unsigned char keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4,
KEY_5, KEY_6, KEY_7 };
static unsigned char keycode_rk3[] = { KEY_1, KEY_2, KEY_3, KEY_4,
KEY_5, KEY_6, KEY_7, KEY_5, KEY_6 };
#define DEG90 (range/2)
#define DEG180 (range)
#define DEG270 (DEG90 + DEG180)
#define DEG360 (DEG180 * 2)
#define HIGH_PEAK (268)
#define LOW_PEAK (-7)
/* some of these devices have endless rotation potentiometers
* built in which use two tapers, 90 degrees phase shifted.
* this algorithm decodes them to one single value, ranging
* from 0 to 999 */
static unsigned int decode_erp(unsigned char a, unsigned char b)
{
int weight_a, weight_b;
int pos_a, pos_b;
int ret;
int range = HIGH_PEAK - LOW_PEAK;
int mid_value = (HIGH_PEAK + LOW_PEAK) / 2;
weight_b = abs(mid_value-a) - (range/2 - 100)/2;
if (weight_b < 0)
weight_b = 0;
if (weight_b > 100)
weight_b = 100;
weight_a = 100 - weight_b;
if (a < mid_value) {
/* 0..90 and 270..360 degrees */
pos_b = b - LOW_PEAK + DEG270;
if (pos_b >= DEG360)
pos_b -= DEG360;
} else
/* 90..270 degrees */
pos_b = HIGH_PEAK - b + DEG90;
if (b > mid_value)
/* 0..180 degrees */
pos_a = a - LOW_PEAK;
else
/* 180..360 degrees */
pos_a = HIGH_PEAK - a + DEG180;
/* interpolate both slider values, depending on weight factors */
/* 0..99 x DEG360 */
ret = pos_a * weight_a + pos_b * weight_b;
/* normalize to 0..999 */
ret *= 10;
ret /= DEG360;
if (ret < 0)
ret += 1000;
if (ret >= 1000)
ret -= 1000;
return ret;
}
#undef DEG90
#undef DEG180
#undef DEG270
#undef DEG360
#undef HIGH_PEAK
#undef LOW_PEAK
static void snd_caiaq_input_read_analog(struct snd_usb_caiaqdev *dev,
const unsigned char *buf,
unsigned int len)
{
switch(dev->input_dev->id.product) {
case USB_PID_RIGKONTROL2:
input_report_abs(dev->input_dev, ABS_X, (buf[4] << 8) |buf[5]);
input_report_abs(dev->input_dev, ABS_Y, (buf[0] << 8) |buf[1]);
input_report_abs(dev->input_dev, ABS_Z, (buf[2] << 8) |buf[3]);
input_sync(dev->input_dev);
break;
case USB_PID_RIGKONTROL3:
input_report_abs(dev->input_dev, ABS_X, (buf[0] << 8) |buf[1]);
input_report_abs(dev->input_dev, ABS_Y, (buf[2] << 8) |buf[3]);
input_report_abs(dev->input_dev, ABS_Z, (buf[4] << 8) |buf[5]);
input_sync(dev->input_dev);
break;
}
}
static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev,
const char *buf, unsigned int len)
{
int i;
switch(dev->input_dev->id.product) {
case USB_PID_AK1:
i = decode_erp(buf[0], buf[1]);
input_report_abs(dev->input_dev, ABS_X, i);
input_sync(dev->input_dev);
break;
}
}
static void snd_caiaq_input_read_io(struct snd_usb_caiaqdev *dev,
char *buf, unsigned int len)
{
int i;
unsigned char *keycode = dev->input_dev->keycode;
if (!keycode)
return;
if (dev->input_dev->id.product == USB_PID_RIGKONTROL2)
for (i=0; i<len; i++)
buf[i] = ~buf[i];
for (i=0; (i<dev->input_dev->keycodemax) && (i < len); i++)
input_report_key(dev->input_dev, keycode[i],
buf[i/8] & (1 << (i%8)));
input_sync(dev->input_dev);
}
void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev,
char *buf,
unsigned int len)
{
if (!dev->input_dev || (len < 1))
return;
switch (buf[0]) {
case EP1_CMD_READ_ANALOG:
snd_caiaq_input_read_analog(dev, buf+1, len-1);
break;
case EP1_CMD_READ_ERP:
snd_caiaq_input_read_erp(dev, buf+1, len-1);
break;
case EP1_CMD_READ_IO:
snd_caiaq_input_read_io(dev, buf+1, len-1);
break;
}
}
int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev)
{
struct usb_device *usb_dev = dev->chip.dev;
struct input_dev *input;
int i, ret;
input = input_allocate_device();
if (!input)
return -ENOMEM;
input->name = dev->product_name;
input->id.bustype = BUS_USB;
input->id.vendor = usb_dev->descriptor.idVendor;
input->id.product = usb_dev->descriptor.idProduct;
input->id.version = usb_dev->descriptor.bcdDevice;
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) |
BIT_MASK(ABS_Z);
input->keycode = keycode_rk2;
input->keycodesize = sizeof(char);
input->keycodemax = ARRAY_SIZE(keycode_rk2);
for (i=0; i<ARRAY_SIZE(keycode_rk2); i++)
set_bit(keycode_rk2[i], input->keybit);
input_set_abs_params(input, ABS_X, 0, 4096, 0, 10);
input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10);
input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10);
snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
input->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
input->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_Z);
input->keycode = keycode_rk3;
input->keycodesize = sizeof(char);
input->keycodemax = ARRAY_SIZE(keycode_rk3);
for (i=0; i<ARRAY_SIZE(keycode_rk3); i++)
set_bit(keycode_rk3[i], input->keybit);
input_set_abs_params(input, ABS_X, 0, 1024, 0, 10);
input_set_abs_params(input, ABS_Y, 0, 1024, 0, 10);
input_set_abs_params(input, ABS_Z, 0, 1024, 0, 10);
snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input->absbit[0] = BIT_MASK(ABS_X);
input->keycode = keycode_ak1;
input->keycodesize = sizeof(char);
input->keycodemax = ARRAY_SIZE(keycode_ak1);
for (i=0; i<ARRAY_SIZE(keycode_ak1); i++)
set_bit(keycode_ak1[i], input->keybit);
input_set_abs_params(input, ABS_X, 0, 999, 0, 10);
snd_usb_caiaq_set_auto_msg(dev, 1, 0, 5);
break;
default:
/* no input methods supported on this device */
input_free_device(input);
return 0;
}
ret = input_register_device(input);
if (ret < 0) {
input_free_device(input);
return ret;
}
dev->input_dev = input;
return 0;
}
void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev)
{
if (!dev || !dev->input_dev)
return;
input_unregister_device(dev->input_dev);
dev->input_dev = NULL;
}
#endif /* CONFIG_SND_USB_CAIAQ_INPUT */
