menu "LITMUS^RT"
menu "Scheduling"
config PLUGIN_CEDF
bool "Clustered-EDF"
depends on X86 && SYSFS
default y
help
Include the Clustered EDF (C-EDF) plugin in the kernel.
This is appropriate for large platforms with shared caches.
On smaller platforms (e.g., ARM PB11MPCore), using C-EDF
makes little sense since there aren't any shared caches.
config PLUGIN_PFAIR
bool "PFAIR"
depends on HIGH_RES_TIMERS && !NO_HZ
default y
help
Include the PFAIR plugin (i.e., the PD^2 scheduler) in the kernel.
The PFAIR plugin requires high resolution timers (for staggered quanta)
and does not support NO_HZ (quanta could be missed when the system is idle).
If unsure, say Yes.
config RELEASE_MASTER
bool "Release-master Support"
depends on ARCH_HAS_SEND_PULL_TIMERS
default n
help
Allow one processor to act as a dedicated interrupt processor
that services all timer interrupts, but that does not schedule
real-time tasks. See RTSS'09 paper for details
(http://www.cs.unc.edu/~anderson/papers.html).
Currently only supported by GSN-EDF.
endmenu
menu "Real-Time Synchronization"
config NP_SECTION
bool "Non-preemptive section support"
default n
help
Allow tasks to become non-preemptable.
Note that plugins still need to explicitly support non-preemptivity.
Currently, only GSN-EDF and PSN-EDF have such support.
This is required to support locking protocols such as the FMLP.
If disabled, all tasks will be considered preemptable at all times.
config LITMUS_LOCKING
bool "Support for real-time locking protocols"
depends on NP_SECTION
default n
help
Enable LITMUS^RT's deterministic multiprocessor real-time
locking protocols.
Say Yes if you want to include locking protocols such as the FMLP and
Baker's SRP.
endmenu
menu "Performance Enhancements"
config SCHED_CPU_AFFINITY
bool "Local Migration Affinity"
depends on X86
default y
help
Rescheduled tasks prefer CPUs near to their previously used CPU. This
may improve performance through possible preservation of cache affinity.
Warning: May make bugs harder to find since tasks may migrate less often.
NOTES:
* Feature is not utilized by PFair/PD^2.
Say Yes if unsure.
endmenu
menu "Tracing"
config FEATHER_TRACE
bool "Feather-Trace Infrastructure"
default y
help
Feather-Trace basic tracing infrastructure. Includes device file
driver and instrumentation point support.
There are actually two implementations of Feather-Trace.
1) A slower, but portable, default implementation.
2) Architecture-specific implementations that rewrite kernel .text at runtime.
If enabled, Feather-Trace will be based on 2) if available (currently only for x86).
However, if DEBUG_RODATA=y, then Feather-Trace will choose option 1) in any case
to avoid problems with write-protected .text pages.
Bottom line: to avoid increased overheads, choose DEBUG_RODATA=n.
Note that this option only enables the basic Feather-Trace infrastructure;
you still need to enable SCHED_TASK_TRACE and/or SCHED_OVERHEAD_TRACE to
actually enable any events.
config SCHED_TASK_TRACE
bool "Trace real-time tasks"
depends on FEATHER_TRACE
default y
help
Include support for the sched_trace_XXX() tracing functions. This
allows the collection of real-time task events such as job
completions, job releases, early completions, etc. This results in a
small overhead in the scheduling code. Disable if the overhead is not
acceptable (e.g., benchmarking).
Say Yes for debugging.
Say No for overhead tracing.
config SCHED_TASK_TRACE_SHIFT
int "Buffer size for sched_trace_xxx() events"
depends on SCHED_TASK_TRACE
range 8 13
default 9
help
Select the buffer size of sched_trace_xxx() events as a power of two.
These buffers are statically allocated as per-CPU data. Each event
requires 24 bytes storage plus one additional flag byte. Too large
buffers can cause issues with the per-cpu allocator (and waste
memory). Too small buffers can cause scheduling events to be lost. The
"right" size is workload dependent and depends on the number of tasks,
each task's period, each task's number of suspensions, and how often
the buffer is flushed.
Examples: 12 => 4k events
10 => 1k events
8 => 512 events
config SCHED_OVERHEAD_TRACE
bool "Record timestamps for overhead measurements"
depends on FEATHER_TRACE
default n
help
Export event stream for overhead tracing.
Say Yes for overhead tracing.
config SCHED_DEBUG_TRACE
bool "TRACE() debugging"
default y
help
Include support for sched_trace_log_messageg(), which is used to
implement TRACE(). If disabled, no TRACE() messages will be included
in the kernel, and no overheads due to debugging statements will be
incurred by the scheduler. Disable if the overhead is not acceptable
(e.g. benchmarking).
Say Yes for debugging.
Say No for overhead tracing.
config SCHED_DEBUG_TRACE_SHIFT
int "Buffer size for TRACE() buffer"
depends on SCHED_DEBUG_TRACE
range 14 22
default 18
help
Select the amount of memory needed per for the TRACE() buffer, as a
power of two. The TRACE() buffer is global and statically allocated. If
the buffer is too small, there will be holes in the TRACE() log if the
buffer-flushing task is starved.
The default should be sufficient for most systems. Increase the buffer
size if the log contains holes. Reduce the buffer size when running on
a memory-constrained system.
Examples: 14 => 16KB
18 => 256KB
20 => 1MB
This buffer is exported to usespace using a misc device as
'litmus/log'. On a system with default udev rules, a corresponding
character device node should be created at /dev/litmus/log. The buffer
can be flushed using cat, e.g., 'cat /dev/litmus/log > my_log_file.txt'.
config SCHED_DEBUG_TRACE_CALLER
bool "Include [function@file:line] tag in TRACE() log"
depends on SCHED_DEBUG_TRACE
default n
help
With this option enabled, TRACE() prepends
"[<function name>@<filename>:<line number>]"
to each message in the debug log. Enable this to aid in figuring out
what was called in which order. The downside is that it adds a lot of
clutter.
If unsure, say No.
config PREEMPT_STATE_TRACE
bool "Trace preemption state machine transitions"
depends on SCHED_DEBUG_TRACE
default n
help
With this option enabled, each CPU will log when it transitions
states in the preemption state machine. This state machine is
used to determine how to react to IPIs (avoid races with in-flight IPIs).
Warning: this creates a lot of information in the debug trace. Only
recommended when you are debugging preemption-related races.
If unsure, say No.
endmenu
menu "Interrupt Handling"
choice
prompt "Scheduling of interrupt bottom-halves in Litmus."
default LITMUS_SOFTIRQD_NONE
depends on LITMUS_LOCKING && !LITMUS_THREAD_ALL_SOFTIRQ
help
Schedule tasklets with known priorities in Litmus.
config LITMUS_SOFTIRQD_NONE
bool "No tasklet scheduling in Litmus."
help
Don't schedule tasklets in Litmus. Default.
config LITMUS_SOFTIRQD
bool "Spawn klitirqd interrupt handling threads."
help
Create klitirqd interrupt handling threads. Work must be
specifically dispatched to these workers. (Softirqs for
Litmus tasks are not magically redirected to klitirqd.)
G-EDF/RM, C-EDF/RM ONLY for now!
config LITMUS_PAI_SOFTIRQD
bool "Defer tasklets to context switch points."
help
Only execute scheduled tasklet bottom halves at
scheduling points. Trades context switch overhead
at the cost of non-preemptive durations of bottom half
processing.
G-EDF/RM, C-EDF/RM ONLY for now!
endchoice
config NR_LITMUS_SOFTIRQD
int "Number of klitirqd."
depends on LITMUS_SOFTIRQD
range 1 4096
default "1"
help
Should be <= to the number of CPUs in your system.
config LITMUS_NVIDIA
bool "Litmus handling of NVIDIA interrupts."
depends on LITMUS_SOFTIRQD || LITMUS_PAI_SOFTIRQD
default n
help
Direct tasklets from NVIDIA devices to Litmus's klitirqd.
If unsure, say No.
config NV_DEVICE_NUM
int "Number of NVIDIA GPUs."
depends on LITMUS_SOFTIRQD || LITMUS_PAI_SOFTIRQD
range 1 4096
default "1"
help
Should be (<= to the number of CPUs) and
(<= to the number of GPUs) in your system.
choice
prompt "CUDA/Driver Version Support"
default CUDA_4_0
depends on LITMUS_NVIDIA
help
Select the version of CUDA/driver to support.
config CUDA_4_0
bool "CUDA 4.0"
depends on LITMUS_NVIDIA
help
Support CUDA 4.0 RC2 (dev. driver version: x86_64-270.40)
config CUDA_3_2
bool "CUDA 3.2"
depends on LITMUS_NVIDIA
help
Support CUDA 3.2 (dev. driver version: x86_64-260.24)
endchoice
endmenu
endmenu
