/*
* linux/kernel/time/tick-sched.c
*
* Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de>
* Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar
* Copyright(C) 2006-2007 Timesys Corp., Thomas Gleixner
*
* No idle tick implementation for low and high resolution timers
*
* Started by: Thomas Gleixner and Ingo Molnar
*
* Distribute under GPLv2.
*/
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/hrtimer.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/percpu.h>
#include <linux/profile.h>
#include <linux/sched.h>
#include <linux/tick.h>
#include <linux/module.h>
#include <asm/irq_regs.h>
#include "tick-internal.h"
/*
* Per cpu nohz control structure
*/
static DEFINE_PER_CPU(struct tick_sched, tick_cpu_sched);
/*
* The time, when the last jiffy update happened. Protected by xtime_lock.
*/
static ktime_t last_jiffies_update;
struct tick_sched *tick_get_tick_sched(int cpu)
{
return &per_cpu(tick_cpu_sched, cpu);
}
/*
* Must be called with interrupts disabled !
*/
static void tick_do_update_jiffies64(ktime_t now)
{
unsigned long ticks = 0;
ktime_t delta;
/*
* Do a quick check without holding xtime_lock:
*/
delta = ktime_sub(now, last_jiffies_update);
if (delta.tv64 < tick_period.tv64)
return;
/* Reevalute with xtime_lock held */
write_seqlock(&xtime_lock);
delta = ktime_sub(now, last_jiffies_update);
if (delta.tv64 >= tick_period.tv64) {
delta = ktime_sub(delta, tick_period);
last_jiffies_update = ktime_add(last_jiffies_update,
tick_period);
/* Slow path for long timeouts */
if (unlikely(delta.tv64 >= tick_period.tv64)) {
s64 incr = ktime_to_ns(tick_period);
ticks = ktime_divns(delta, incr);
last_jiffies_update = ktime_add_ns(last_jiffies_update,
incr * ticks);
}
do_timer(++ticks);
/* Keep the tick_next_period variable up to date */
tick_next_period = ktime_add(last_jiffies_update, tick_period);
}
write_sequnlock(&xtime_lock);
}
/*
* Initialize and return retrieve the jiffies update.
*/
static ktime_t tick_init_jiffy_update(void)
{
ktime_t period;
write_seqlock(&xtime_lock);
/* Did we start the jiffies update yet ? */
if (last_jiffies_update.tv64 == 0)
last_jiffies_update = tick_next_period;
period = last_jiffies_update;
write_sequnlock(&xtime_lock);
return period;
}
/*
* NOHZ - aka dynamic tick functionality
*/
#ifdef CONFIG_NO_HZ
/*
* NO HZ enabled ?
*/
static int tick_nohz_enabled __read_mostly = 1;
/*
* Enable / Disable tickless mode
*/
static int __init setup_tick_nohz(char *str)
{
if (!strcmp(str, "off"))
tick_nohz_enabled = 0;
else if (!strcmp(str, "on"))
tick_nohz_enabled = 1;
else
return 0;
return 1;
}
__setup("nohz=", setup_tick_nohz);
/**
* tick_nohz_update_jiffies - update jiffies when idle was interrupted
*
* Called from interrupt entry when the CPU was idle
*
* In case the sched_tick was stopped on this CPU, we have to check if jiffies
* must be updated. Otherwise an interrupt handler could use a stale jiffy
* value. We do this unconditionally on any cpu, as we don't know whether the
* cpu, which has the update task assigned is in a long sleep.
*/
static void tick_nohz_update_jiffies(ktime_t now)
{
int cpu = smp_processor_id();
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
unsigned long flags;
cpumask_clear_cpu(cpu, nohz_cpu_mask);
ts->idle_waketime = now;
local_irq_save(flags);
tick_do_update_jiffies64(now);
local_irq_restore(flags);
touch_softlockup_watchdog();
}
static void tick_nohz_stop_idle(int cpu, ktime_t now)
{
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
ktime_t delta;
delta = ktime_sub(now, ts->idle_entrytime);
ts->idle_lastupdate = now;
ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
ts->idle_active = 0;
sched_clock_idle_wakeup_event(0);
}
static ktime_t tick_nohz_start_idle(struct tick_sched *ts)
{
ktime_t now, delta;
now = ktime_get();
if (ts->idle_active) {
delta = ktime_sub(now, ts->idle_entrytime);
ts->idle_lastupdate = now;
ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
}
ts->idle_entrytime = now;
ts->idle_active = 1;
sched_clock_idle_sleep_event();
return now;
}
u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time)
{
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
if (!tick_nohz_enabled)
return -1;
if (ts->idle_active)
*last_update_time = ktime_to_us(ts->idle_lastupdate);
else
*last_update_time = ktime_to_us(ktime_get());
return ktime_to_us(ts->idle_sleeptime);
}
EXPORT_SYMBOL_GPL(get_cpu_idle_time_us);
/**
* tick_nohz_stop_sched_tick - stop the idle tick from the idle task
*
* When the next event is more than a tick into the future, stop the idle tick
* Called either from the idle loop or from irq_exit() when an idle period was
* just interrupted by an interrupt which did not cause a reschedule.
*/
void tick_nohz_stop_sched_tick(int inidle)
{
unsigned long seq, last_jiffies, next_jiffies, delta_jiffies, flags;
struct tick_sched *ts;
ktime_t last_update, expires, now;
struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
u64 time_delta;
int cpu;
local_irq_save(flags);
cpu = smp_processor_id();
ts = &per_cpu(tick_cpu_sched, cpu);
/*
* Call to tick_nohz_start_idle stops the last_update_time from being
* updated. Thus, it must not be called in the event we are called from
* irq_exit() with the prior state different than idle.
*/
if (!inidle && !ts->inidle)
goto end;
/*
* Set ts->inidle unconditionally. Even if the system did not
* switch to NOHZ mode the cpu frequency governers rely on the
* update of the idle time accounting in tick_nohz_start_idle().
*/
ts->inidle = 1;
now = tick_nohz_start_idle(ts);
/*
* If this cpu is offline and it is the one which updates
* jiffies, then give up the assignment and let it be taken by
* the cpu which runs the tick timer next. If we don't drop
* this here the jiffies might be stale and do_timer() never
* invoked.
*/
if (unlikely(!cpu_online(cpu))) {
if (cpu == tick_do_timer_cpu)
tick_do_timer_cpu = TICK_DO_TIMER_NONE;
}
if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
goto end;
if (need_resched())
goto end;
if (unlikely(local_softirq_pending() && cpu_online(cpu))) {
static int ratelimit;
if (ratelimit < 10) {
printk(KERN_ERR "NOHZ: local_softirq_pending %02x\n",
(unsigned int) local_softirq_pending());
ratelimit++;
}
goto end;
}
ts->idle_calls++;
/* Read jiffies and the time when jiffies were updated last */
do {
seq = read_seqbegin(&xtime_lock);
last_update = last_jiffies_update;
last_jiffies = jiffies;
time_delta = timekeeping_max_deferment();
} while (read_seqretry(&xtime_lock, seq));
if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
arch_needs_cpu(cpu)) {
next_jiffies = last_jiffies + 1;
delta_jiffies = 1;
} else {
/* Get the next timer wheel timer */
next_jiffies = get_next_timer_interrupt(last_jiffies);
delta_jiffies = next_jiffies - last_jiffies;
}
/*
* Do not stop the tick, if we are only one off
* or if the cpu is required for rcu
*/
if (!ts->tick_stopped && delta_jiffies == 1)
goto out;
/* Schedule the tick, if we are at least one jiffie off */
if ((long)delta_jiffies >= 1) {
/*
* If this cpu is the one which updates jiffies, then
* give up the assignment and let it be taken by the
* cpu which runs the tick timer next, which might be
* this cpu as well. If we don't drop this here the
* jiffies might be stale and do_timer() never
* invoked. Keep track of the fact that it was the one
* which had the do_timer() duty last. If this cpu is
* the one which had the do_timer() duty last, we
* limit the sleep time to the timekeeping
* max_deferement value which we retrieved
* above. Otherwise we can sleep as long as we want.
*/
if (cpu == tick_do_timer_cpu) {
tick_do_timer_cpu = TICK_DO_TIMER_NONE;
ts->do_timer_last = 1;
} else if (tick_do_timer_cpu != TICK_DO_TIMER_NONE) {
time_delta = KTIME_MAX;
ts->do_timer_last = 0;
} else if (!ts->do_timer_last) {
time_delta = KTIME_MAX;
}
/*
* calculate the expiry time for the next timer wheel
* timer. delta_jiffies >= NEXT_TIMER_MAX_DELTA signals
* that there is no timer pending or at least extremely
* far into the future (12 days for HZ=1000). In this
* case we set the expiry to the end of time.
*/
if (likely(delta_jiffies < NEXT_TIMER_MAX_DELTA)) {
/*
* Calculate the time delta for the next timer event.
* If the time delta exceeds the maximum time delta
* permitted by the current clocksource then adjust
* the time delta accordingly to ensure the
* clocksource does not wrap.
*/
time_delta = min_t(u64, time_delta,
tick_period.tv64 * delta_jiffies);
}
if (time_delta < KTIME_MAX)
expires = ktime_add_ns(last_update, time_delta);
else
expires.tv64 = KTIME_MAX;
if (delta_jiffies > 1)
cpumask_set_cpu(cpu, nohz_cpu_mask);
/* Skip reprogram of event if its not changed */
if (ts->tick_stopped && ktime_equal(expires, dev->next_event))
goto out;
/*
* nohz_stop_sched_tick can be called several times before
* the nohz_restart_sched_tick is called. This happens when
* interrupts arrive which do not cause a reschedule. In the
* first call we save the current tick time, so we can restart
* the scheduler tick in nohz_restart_sched_tick.
*/
if (!ts->tick_stopped) {
if (select_nohz_load_balancer(1)) {
/*
* sched tick not stopped!
*/
cpumask_clear_cpu(cpu, nohz_cpu_mask);
goto out;
}
ts->idle_tick = hrtimer_get_expires(&ts->sched_timer);
ts->tick_stopped = 1;
ts->idle_jiffies = last_jiffies;
rcu_enter_nohz();
}
ts->idle_sleeps++;
/* Mark expires */
ts->idle_expires = expires;
/*
* If the expiration time == KTIME_MAX, then
* in this case we simply stop the tick timer.
*/
if (unlikely(expires.tv64 == KTIME_MAX)) {
if (ts->nohz_mode == NOHZ_MODE_HIGHRES)
hrtimer_cancel(&ts->sched_timer);
goto out;
}
if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
hrtimer_start(&ts->sched_timer, expires,
HRTIMER_MODE_ABS_PINNED);
/* Check, if the timer was already in the past */
if (hrtimer_active(&ts->sched_timer))
goto out;
} else if (!tick_program_event(expires, 0))
goto out;
/*
* We are past the event already. So we crossed a
* jiffie boundary. Update jiffies and raise the
* softirq.
*/
tick_do_update_jiffies64(ktime_get());
cpumask_clear_cpu(cpu, nohz_cpu_mask);
}
raise_softirq_irqoff(TIMER_SOFTIRQ);
out:
ts->next_jiffies = next_jiffies;
ts->last_jiffies = last_jiffies;
ts->sleep_length = ktime_sub(dev->next_event, now);
end:
local_irq_restore(flags);
}
/**
* tick_nohz_get_sleep_length - return the length of the current sleep
*
* Called from power state control code with interrupts disabled
*/
ktime_t tick_nohz_get_sleep_length(void)
{
struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
return ts->sleep_length;
}
static void tick_nohz_restart(struct tick_sched *ts, ktime_t now)
{
hrtimer_cancel(&ts->sched_timer);
hrtimer_set_expires(&ts->sched_timer, ts->idle_tick);
while (1) {
/* Forward the time to expire in the future */
hrtimer_forward(&ts->sched_timer, now, tick_period);
if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
hrtimer_start_expires(&ts->sched_timer,
HRTIMER_MODE_ABS_PINNED);
/* Check, if the timer was already in the past */
if (hrtimer_active(&ts->sched_timer))
break;
} else {
if (!tick_program_event(
hrtimer_get_expires(&ts->sched_timer), 0))
break;
}
/* Update jiffies and reread time */
tick_do_update_jiffies64(now);
now = ktime_get();
}
}
/**
* tick_nohz_restart_sched_tick - restart the idle tick from the idle task
*
* Restart the idle tick when the CPU is woken up from idle
*/
void tick_nohz_restart_sched_tick(void)
{
int cpu = smp_processor_id();
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
#ifndef CONFIG_VIRT_CPU_ACCOUNTING
unsigned long ticks;
#endif
ktime_t now;
local_irq_disable();
if (ts->idle_active || (ts->inidle && ts->tick_stopped))
now = ktime_get();
if (ts->idle_active)
tick_nohz_stop_idle(cpu, now);
if (!ts->inidle || !ts->tick_stopped) {
ts->inidle = 0;
local_irq_enable();
return;
}
ts->inidle = 0;
rcu_exit_nohz();
/* Update jiffies first */
select_nohz_load_balancer(0);
tick_do_update_jiffies64(now);
cpumask_clear_cpu(cpu, nohz_cpu_mask);
#ifndef CONFIG_VIRT_CPU_ACCOUNTING
/*
* We stopped the tick in idle. Update process times would miss the
* time we slept as update_process_times does only a 1 tick
* accounting. Enforce that this is accounted to idle !
*/
ticks = jiffies - ts->idle_jiffies;
/*
* We might be one off. Do not randomly account a huge number of ticks!
*/
if (ticks && ticks < LONG_MAX)
account_idle_ticks(ticks);
#endif
touch_softlockup_watchdog();
/*
* Cancel the scheduled timer and restore the tick
*/
ts->tick_stopped = 0;
ts->idle_exittime = now;
tick_nohz_restart(ts, now);
local_irq_enable();
}
static int tick_nohz_reprogram(struct tick_sched *ts, ktime_t now)
{
hrtimer_forward(&ts->sched_timer, now, tick_period);
return tick_program_event(hrtimer_get_expires(&ts->sched_timer), 0);
}
/*
* The nohz low res interrupt handler
*/
static void tick_nohz_handler(struct clock_event_device *dev)
{
struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
struct pt_regs *regs = get_irq_regs();
int cpu = smp_processor_id();
ktime_t now = ktime_get();
dev->next_event.tv64 = KTIME_MAX;
/*
* Check if the do_timer duty was dropped. We don't care about
* concurrency: This happens only when the cpu in charge went
* into a long sleep. If two cpus happen to assign themself to
* this duty, then the jiffies update is still serialized by
* xtime_lock.
*/
if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
tick_do_timer_cpu = cpu;
/* Check, if the jiffies need an update */
if (tick_do_timer_cpu == cpu)
tick_do_update_jiffies64(now);
/*
* When we are idle and the tick is stopped, we have to touch
* the watchdog as we might not schedule for a really long
* time. This happens on complete idle SMP systems while
* waiting on the login prompt. We also increment the "start
* of idle" jiffy stamp so the idle accounting adjustment we
* do when we go busy again does not account too much ticks.
*/
if (ts->tick_stopped) {
touch_softlockup_watchdog();
ts->idle_jiffies++;
}
update_process_times(user_mode(regs));
profile_tick(CPU_PROFILING);
while (tick_nohz_reprogram(ts, now)) {
now = ktime_get();
tick_do_update_jiffies64(now);
}
}
/**
* tick_nohz_switch_to_nohz - switch to nohz mode
*/
static void tick_nohz_switch_to_nohz(void)
{
struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
ktime_t next;
if (!tick_nohz_enabled)
return;
local_irq_disable();
if (tick_switch_to_oneshot(tick_nohz_handler)) {
local_irq_enable();
return;
}
ts->nohz_mode = NOHZ_MODE_LOWRES;
/*
* Recycle the hrtimer in ts, so we can share the
* hrtimer_forward with the highres code.
*/
hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
/* Get the next period */
next = tick_init_jiffy_update();
for (;;) {
hrtimer_set_expires(&ts->sched_timer, next);
if (!tick_program_event(next, 0))
break;
next = ktime_add(next, tick_period);
}
local_irq_enable();
printk(KERN_INFO "Switched to NOHz mode on CPU #%d\n",
smp_processor_id());
}
/*
* When NOHZ is enabled and the tick is stopped, we need to kick the
* tick timer from irq_enter() so that the jiffies update is kept
* alive during long running softirqs. That's ugly as hell, but
* correctness is key even if we need to fix the offending softirq in
* the first place.
*
* Note, this is different to tick_nohz_restart. We just kick the
* timer and do not touch the other magic bits which need to be done
* when idle is left.
*/
static void tick_nohz_kick_tick(int cpu, ktime_t now)
{
#if 0
/* Switch back to 2.6.27 behaviour */
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
ktime_t delta;
/*
* Do not touch the tick device, when the next expiry is either
* already reached or less/equal than the tick period.
*/
delta = ktime_sub(hrtimer_get_expires(&ts->sched_timer), now);
if (delta.tv64 <= tick_period.tv64)
return;
tick_nohz_restart(ts, now);
#endif
}
static inline void tick_check_nohz(int cpu)
{
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
ktime_t now;
if (!ts->idle_active && !ts->tick_stopped)
return;
now = ktime_get();
if (ts->idle_active)
tick_nohz_stop_idle(cpu, now);
if (ts->tick_stopped) {
tick_nohz_update_jiffies(now);
tick_nohz_kick_tick(cpu, now);
}
}
#else
static inline void tick_nohz_switch_to_nohz(void) { }
static inline void tick_check_nohz(int cpu) { }
#endif /* NO_HZ */
/*
* Called from irq_enter to notify about the possible interruption of idle()
*/
void tick_check_idle(int cpu)
{
tick_check_oneshot_broadcast(cpu);
tick_check_nohz(cpu);
}
/*
* High resolution timer specific code
*/
#ifdef CONFIG_HIGH_RES_TIMERS
/*
* We rearm the timer until we get disabled by the idle code.
* Called with interrupts disabled and timer->base->cpu_base->lock held.
*/
static enum hrtimer_restart tick_sched_timer(struct hrtimer *timer)
{
struct tick_sched *ts =
container_of(timer, struct tick_sched, sched_timer);
struct pt_regs *regs = get_irq_regs();
ktime_t now = ktime_get();
int cpu = smp_processor_id();
#ifdef CONFIG_NO_HZ
/*
* Check if the do_timer duty was dropped. We don't care about
* concurrency: This happens only when the cpu in charge went
* into a long sleep. If two cpus happen to assign themself to
* this duty, then the jiffies update is still serialized by
* xtime_lock.
*/
if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
tick_do_timer_cpu = cpu;
#endif
/* Check, if the jiffies need an update */
if (tick_do_timer_cpu == cpu)
tick_do_update_jiffies64(now);
/*
* Do not call, when we are not in irq context and have
* no valid regs pointer
*/
if (regs) {
/*
* When we are idle and the tick is stopped, we have to touch
* the watchdog as we might not schedule for a really long
* time. This happens on complete idle SMP systems while
* waiting on the login prompt. We also increment the "start of
* idle" jiffy stamp so the idle accounting adjustment we do
* when we go busy again does not account too much ticks.
*/
if (ts->tick_stopped) {
touch_softlockup_watchdog();
ts->idle_jiffies++;
}
update_process_times(user_mode(regs));
profile_tick(CPU_PROFILING);
}
hrtimer_forward(timer, now, tick_period);
return HRTIMER_RESTART;
}
/**
* tick_set_quanta_type - get the quanta type as a boot option
* Default is standard setup with ticks staggered over first
* half of tick period.
*/
int quanta_type = LINUX_DEFAULT_TICKS;
static int __init tick_set_quanta_type(char *str)
{
if (strcmp("aligned", str) == 0) {
quanta_type = LITMUS_ALIGNED_TICKS;
printk(KERN_INFO "LITMUS^RT: setting aligned quanta\n");
}
else if (strcmp("staggered", str) == 0) {
quanta_type = LITMUS_STAGGERED_TICKS;
printk(KERN_INFO "LITMUS^RT: setting staggered quanta\n");
}
return 1;
}
__setup("quanta=", tick_set_quanta_type);
u64 cpu_stagger_offset(int cpu)
{
u64 offset = 0;
switch (quanta_type) {
case LITMUS_ALIGNED_TICKS:
offset = 0;
break;
case LITMUS_STAGGERED_TICKS:
offset = ktime_to_ns(tick_period);
do_div(offset, num_possible_cpus());
offset *= cpu;
break;
default:
offset = ktime_to_ns(tick_period) >> 1;
do_div(offset, num_possible_cpus());
offset *= cpu;
}
return offset;
}
/**
* tick_setup_sched_timer - setup the tick emulation timer
*/
void tick_setup_sched_timer(void)
{
struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
ktime_t now = ktime_get();
u64 offset;
/*
* Emulate tick processing via per-CPU hrtimers:
*/
hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
ts->sched_timer.function = tick_sched_timer;
/* Get the next period (per cpu) */
hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update());
/* Offset must be set correctly to achieve desired quanta type. */
offset = cpu_stagger_offset(smp_processor_id());
/* Add the correct offset to expiration time */
hrtimer_add_expires_ns(&ts->sched_timer, offset);
for (;;) {
hrtimer_forward(&ts->sched_timer, now, tick_period);
hrtimer_start_expires(&ts->sched_timer,
HRTIMER_MODE_ABS_PINNED);
/* Check, if the timer was already in the past */
if (hrtimer_active(&ts->sched_timer))
break;
now = ktime_get();
}
#ifdef CONFIG_NO_HZ
if (tick_nohz_enabled)
ts->nohz_mode = NOHZ_MODE_HIGHRES;
#endif
}
#endif /* HIGH_RES_TIMERS */
#if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
void tick_cancel_sched_timer(int cpu)
{
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
# ifdef CONFIG_HIGH_RES_TIMERS
if (ts->sched_timer.base)
hrtimer_cancel(&ts->sched_timer);
# endif
ts->nohz_mode = NOHZ_MODE_INACTIVE;
}
#endif
/**
* Async notification about clocksource changes
*/
void tick_clock_notify(void)
{
int cpu;
for_each_possible_cpu(cpu)
set_bit(0, &per_cpu(tick_cpu_sched, cpu).check_clocks);
}
/*
* Async notification about clock event changes
*/
void tick_oneshot_notify(void)
{
struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
set_bit(0, &ts->check_clocks);
}
/**
* Check, if a change happened, which makes oneshot possible.
*
* Called cyclic from the hrtimer softirq (driven by the timer
* softirq) allow_nohz signals, that we can switch into low-res nohz
* mode, because high resolution timers are disabled (either compile
* or runtime).
*/
int tick_check_oneshot_change(int allow_nohz)
{
struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
if (!test_and_clear_bit(0, &ts->check_clocks))
return 0;
if (ts->nohz_mode != NOHZ_MODE_INACTIVE)
return 0;
if (!timekeeping_valid_for_hres() || !tick_is_oneshot_available())
return 0;
if (!allow_nohz)
return 1;
tick_nohz_switch_to_nohz();
return 0;
}