/*
* FiberChannel transport specific attributes exported to sysfs.
*
* Copyright (c) 2003 Silicon Graphics, Inc. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ========
*
* Copyright (C) 2004-2007 James Smart, Emulex Corporation
* Rewrite for host, target, device, and remote port attributes,
* statistics, and service functions...
*
*/
#ifndef SCSI_TRANSPORT_FC_H
#define SCSI_TRANSPORT_FC_H
#include <linux/sched.h>
#include <scsi/scsi.h>
#include <scsi/scsi_netlink.h>
struct scsi_transport_template;
/*
* FC Port definitions - Following FC HBAAPI guidelines
*
* Note: Not all binary values for the different fields match HBAAPI.
* Instead, we use densely packed ordinal values or enums.
* We get away with this as we never present the actual binary values
* externally. For sysfs, we always present the string that describes
* the value. Thus, an admin doesn't need a magic HBAAPI decoder ring
* to understand the values. The HBAAPI user-space library is free to
* convert the strings into the HBAAPI-specified binary values.
*
* Note: Not all HBAAPI-defined values are contained in the definitions
* below. Those not appropriate to an fc_host (e.g. FCP initiator) have
* been removed.
*/
/*
* fc_port_type: If you alter this, you also need to alter scsi_transport_fc.c
* (for the ascii descriptions).
*/
enum fc_port_type {
FC_PORTTYPE_UNKNOWN,
FC_PORTTYPE_OTHER,
FC_PORTTYPE_NOTPRESENT,
FC_PORTTYPE_NPORT, /* Attached to FPort */
FC_PORTTYPE_NLPORT, /* (Public) Loop w/ FLPort */
FC_PORTTYPE_LPORT, /* (Private) Loop w/o FLPort */
FC_PORTTYPE_PTP, /* Point to Point w/ another NPort */
FC_PORTTYPE_NPIV, /* VPORT based on NPIV */
};
/*
* fc_port_state: If you alter this, you also need to alter scsi_transport_fc.c
* (for the ascii descriptions).
*/
enum fc_port_state {
FC_PORTSTATE_UNKNOWN,
FC_PORTSTATE_NOTPRESENT,
FC_PORTSTATE_ONLINE,
FC_PORTSTATE_OFFLINE, /* User has taken Port Offline */
FC_PORTSTATE_BLOCKED,
FC_PORTSTATE_BYPASSED,
FC_PORTSTATE_DIAGNOSTICS,
FC_PORTSTATE_LINKDOWN,
FC_PORTSTATE_ERROR,
FC_PORTSTATE_LOOPBACK,
FC_PORTSTATE_DELETED,
};
/*
* fc_vport_state: If you alter this, you also need to alter
* scsi_transport_fc.c (for the ascii descriptions).
*/
enum fc_vport_state {
FC_VPORT_UNKNOWN,
FC_VPORT_ACTIVE,
FC_VPORT_DISABLED,
FC_VPORT_LINKDOWN,
FC_VPORT_INITIALIZING,
FC_VPORT_NO_FABRIC_SUPP,
FC_VPORT_NO_FABRIC_RSCS,
FC_VPORT_FABRIC_LOGOUT,
FC_VPORT_FABRIC_REJ_WWN,
FC_VPORT_FAILED,
};
/*
* FC Classes of Service
* Note: values are not enumerated, as they can be "or'd" together
* for reporting (e.g. report supported_classes). If you alter this list,
* you also need to alter scsi_transport_fc.c (for the ascii descriptions).
*/
#define FC_COS_UNSPECIFIED 0
#define FC_COS_CLASS1 2
#define FC_COS_CLASS2 4
#define FC_COS_CLASS3 8
#define FC_COS_CLASS4 0x10
#define FC_COS_CLASS6 0x40
/*
* FC Port Speeds
* Note: values are not enumerated, as they can be "or'd" together
* for reporting (e.g. report supported_speeds). If you alter this list,
* you also need to alter scsi_transport_fc.c (for the ascii descriptions).
*/
#define FC_PORTSPEED_UNKNOWN 0 /* Unknown - transceiver
incapable of reporting */
#define FC_PORTSPEED_1GBIT 1
#define FC_PORTSPEED_2GBIT 2
#define FC_PORTSPEED_4GBIT 4
#define FC_PORTSPEED_10GBIT 8
#define FC_PORTSPEED_8GBIT 0x10
#define FC_PORTSPEED_16GBIT 0x20
#define FC_PORTSPEED_NOT_NEGOTIATED (1 << 15) /* Speed not established */
/*
* fc_tgtid_binding_type: If you alter this, you also need to alter
* scsi_transport_fc.c (for the ascii descriptions).
*/
enum fc_tgtid_binding_type {
FC_TGTID_BIND_NONE,
FC_TGTID_BIND_BY_WWPN,
FC_TGTID_BIND_BY_WWNN,
FC_TGTID_BIND_BY_ID,
};
/*
* FC Port Roles
* Note: values are not enumerated, as they can be "or'd" together
* for reporting (e.g. report roles). If you alter this list,
* you also need to alter scsi_transport_fc.c (for the ascii descriptions).
*/
#define FC_PORT_ROLE_UNKNOWN 0x00
#define FC_PORT_ROLE_FCP_TARGET 0x01
#define FC_PORT_ROLE_FCP_INITIATOR 0x02
#define FC_PORT_ROLE_IP_PORT 0x04
/* The following are for compatibility */
#define FC_RPORT_ROLE_UNKNOWN FC_PORT_ROLE_UNKNOWN
#define FC_RPORT_ROLE_FCP_TARGET FC_PORT_ROLE_FCP_TARGET
#define FC_RPORT_ROLE_FCP_INITIATOR FC_PORT_ROLE_FCP_INITIATOR
#define FC_RPORT_ROLE_IP_PORT FC_PORT_ROLE_IP_PORT
/* Macro for use in defining Virtual Port attributes */
#define FC_VPORT_ATTR(_name,_mode,_show,_store) \
struct device_attribute dev_attr_vport_##_name = \
__ATTR(_name,_mode,_show,_store)
/*
* fc_vport_identifiers: This set of data contains all elements
* to uniquely identify and instantiate a FC virtual port.
*
* Notes:
* symbolic_name: The driver is to append the symbolic_name string data
* to the symbolic_node_name data that it generates by default.
* the resulting combination should then be registered with the switch.
* It is expected that things like Xen may stuff a VM title into
* this field.
*/
#define FC_VPORT_SYMBOLIC_NAMELEN 64
struct fc_vport_identifiers {
u64 node_name;
u64 port_name;
u32 roles;
bool disable;
enum fc_port_type vport_type; /* only FC_PORTTYPE_NPIV allowed */
char symbolic_name[FC_VPORT_SYMBOLIC_NAMELEN];
};
/*
* FC Virtual Port Attributes
*
* This structure exists for each FC port is a virtual FC port. Virtual
* ports share the physical link with the Physical port. Each virtual
* ports has a unique presense on the SAN, and may be instantiated via
* NPIV, Virtual Fabrics, or via additional ALPAs. As the vport is a
* unique presense, each vport has it's own view of the fabric,
* authentication privilege, and priorities.
*
* A virtual port may support 1 or more FC4 roles. Typically it is a
* FCP Initiator. It could be a FCP Target, or exist sole for an IP over FC
* roles. FC port attributes for the vport will be reported on any
* fc_host class object allocated for an FCP Initiator.
*
* --
*
* Fixed attributes are not expected to change. The driver is
* expected to set these values after receiving the fc_vport structure
* via the vport_create() call from the transport.
* The transport fully manages all get functions w/o driver interaction.
*
* Dynamic attributes are expected to change. The driver participates
* in all get/set operations via functions provided by the driver.
*
* Private attributes are transport-managed values. They are fully
* managed by the transport w/o driver interaction.
*/
struct fc_vport {
/* Fixed Attributes */
/* Dynamic Attributes */
/* Private (Transport-managed) Attributes */
enum fc_vport_state vport_state;
enum fc_vport_state vport_last_state;
u64 node_name;
u64 port_name;
u32 roles;
u32 vport_id; /* Admin Identifier for the vport */
enum fc_port_type vport_type;
char symbolic_name[FC_VPORT_SYMBOLIC_NAMELEN];
/* exported data */
void *dd_data; /* Used for driver-specific storage */
/* internal data */
struct Scsi_Host *shost; /* Physical Port Parent */
unsigned int channel;
u32 number;
u8 flags;
struct list_head peers;
struct device dev;
struct work_struct vport_delete_work;
} __attribute__((aligned(sizeof(unsigned long))));
/* bit field values for struct fc_vport "flags" field: */
#define FC_VPORT_CREATING 0x01
#define FC_VPORT_DELETING 0x02
#define FC_VPORT_DELETED 0x04
#define FC_VPORT_DEL 0x06 /* Any DELETE state */
#define dev_to_vport(d) \
container_of(d, struct fc_vport, dev)
#define transport_class_to_vport(dev) \
dev_to_vport(dev->parent)
#define vport_to_shost(v) \
(v->shost)
#define vport_to_shost_channel(v) \
(v->channel)
#define vport_to_parent(v) \
(v->dev.parent)
/* Error return codes for vport_create() callback */
#define VPCERR_UNSUPPORTED -ENOSYS /* no driver/adapter
support */
#define VPCERR_BAD_WWN -ENOTUNIQ /* driver validation
of WWNs failed */
#define VPCERR_NO_FABRIC_SUPP -EOPNOTSUPP /* Fabric connection
is loop or the
Fabric Port does
not support NPIV */
/*
* fc_rport_identifiers: This set of data contains all elements
* to uniquely identify a remote FC port. The driver uses this data
* to report the existence of a remote FC port in the topology. Internally,
* the transport uses this data for attributes and to manage consistent
* target id bindings.
*/
struct fc_rport_identifiers {
u64 node_name;
u64 port_name;
u32 port_id;
u32 roles;
};
/* Macro for use in defining Remote Port attributes */
#define FC_RPORT_ATTR(_name,_mode,_show,_store) \
struct device_attribute dev_attr_rport_##_name = \
__ATTR(_name,_mode,_show,_store)
/*
* FC Remote Port Attributes
*
* This structure exists for each remote FC port that a LLDD notifies
* the subsystem of. A remote FC port may or may not be a SCSI Target,
* also be a SCSI initiator, IP endpoint, etc. As such, the remote
* port is considered a separate entity, independent of "role" (such
* as scsi target).
*
* --
*
* Attributes are based on HBAAPI V2.0 definitions. Only those
* attributes that are determinable by the local port (aka Host)
* are contained.
*
* Fixed attributes are not expected to change. The driver is
* expected to set these values after successfully calling
* fc_remote_port_add(). The transport fully manages all get functions
* w/o driver interaction.
*
* Dynamic attributes are expected to change. The driver participates
* in all get/set operations via functions provided by the driver.
*
* Private attributes are transport-managed values. They are fully
* managed by the transport w/o driver interaction.
*/
struct fc_rport { /* aka fc_starget_attrs */
/* Fixed Attributes */
u32 maxframe_size;
u32 supported_classes;
/* Dynamic Attributes */
u32 dev_loss_tmo; /* Remote Port loss timeout in seconds. */
/* Private (Transport-managed) Attributes */
u64 node_name;
u64 port_name;
u32 port_id;
u32 roles;
enum fc_port_state port_state; /* Will only be ONLINE or UNKNOWN */
u32 scsi_target_id;
u32 fast_io_fail_tmo;
/* exported data */
void *dd_data; /* Used for driver-specific storage */
/* internal data */
unsigned int channel;
u32 number;
u8 flags;
struct list_head peers;
struct device dev;
struct delayed_work dev_loss_work;
struct work_struct scan_work;
struct delayed_work fail_io_work;
struct work_struct stgt_delete_work;
struct work_struct rport_delete_work;
} __attribute__((aligned(sizeof(unsigned long))));
/* bit field values for struct fc_rport "flags" field: */
#define FC_RPORT_DEVLOSS_PENDING 0x01
#define FC_RPORT_SCAN_PENDING 0x02
#define FC_RPORT_FAST_FAIL_TIMEDOUT 0x03
#define dev_to_rport(d) \
container_of(d, struct fc_rport, dev)
#define transport_class_to_rport(dev) \
dev_to_rport(dev->parent)
#define rport_to_shost(r) \
dev_to_shost(r->dev.parent)
/*
* FC SCSI Target Attributes
*
* The SCSI Target is considered an extention of a remote port (as
* a remote port can be more than a SCSI Target). Within the scsi
* subsystem, we leave the Target as a separate entity. Doing so
* provides backward compatibility with prior FC transport api's,
* and lets remote ports be handled entirely within the FC transport
* and independently from the scsi subsystem. The drawback is that
* some data will be duplicated.
*/
struct fc_starget_attrs { /* aka fc_target_attrs */
/* Dynamic Attributes */
u64 node_name;
u64 port_name;
u32 port_id;
};
#define fc_starget_node_name(x) \
(((struct fc_starget_attrs *)&(x)->starget_data)->node_name)
#define fc_starget_port_name(x) \
(((struct fc_starget_attrs *)&(x)->starget_data)->port_name)
#define fc_starget_port_id(x) \
(((struct fc_starget_attrs *)&(x)->starget_data)->port_id)
#define starget_to_rport(s) \
scsi_is_fc_rport(s->dev.parent) ? dev_to_rport(s->dev.parent) : NULL
/*
* FC Local Port (Host) Statistics
*/
/* FC Statistics - Following FC HBAAPI v2.0 guidelines */
struct fc_host_statistics {
/* port statistics */
u64 seconds_since_last_reset;
u64 tx_frames;
u64 tx_words;
u64 rx_frames;
u64 rx_words;
u64 lip_count;
u64 nos_count;
u64 error_frames;
u64 dumped_frames;
u64 link_failure_count;
u64 loss_of_sync_count;
u64 loss_of_signal_count;
u64 prim_seq_protocol_err_count;
u64 invalid_tx_word_count;
u64 invalid_crc_count;
/* fc4 statistics (only FCP supported currently) */
u64 fcp_input_requests;
u64 fcp_output_requests;
u64 fcp_control_requests;
u64 fcp_input_megabytes;
u64 fcp_output_megabytes;
};
/*
* FC Event Codes - Polled and Async, following FC HBAAPI v2.0 guidelines
*/
/*
* fc_host_event_code: If you alter this, you also need to alter
* scsi_transport_fc.c (for the ascii descriptions).
*/
enum fc_host_event_code {
FCH_EVT_LIP = 0x1,
FCH_EVT_LINKUP = 0x2,
FCH_EVT_LINKDOWN = 0x3,
FCH_EVT_LIPRESET = 0x4,
FCH_EVT_RSCN = 0x5,
FCH_EVT_ADAPTER_CHANGE = 0x103,
FCH_EVT_PORT_UNKNOWN = 0x200,
FCH_EVT_PORT_OFFLINE = 0x201,
FCH_EVT_PORT_ONLINE = 0x202,
FCH_EVT_PORT_FABRIC = 0x204,
FCH_EVT_LINK_UNKNOWN = 0x500,
FCH_EVT_VENDOR_UNIQUE = 0xffff,
};
/*
* FC Local Port (Host) Attributes
*
* Attributes are based on HBAAPI V2.0 definitions.
* Note: OSDeviceName is determined by user-space library
*
* Fixed attributes are not expected to change. The driver is
* expected to set these values after successfully calling scsi_add_host().
* The transport fully manages all get functions w/o driver interaction.
*
* Dynamic attributes are expected to change. The driver participates
* in all get/set operations via functions provided by the driver.
*
* Private attributes are transport-managed values. They are fully
* managed by the transport w/o driver interaction.
*/
#define FC_FC4_LIST_SIZE 32
#define FC_SYMBOLIC_NAME_SIZE 256
#define FC_VERSION_STRING_SIZE 64
#define FC_SERIAL_NUMBER_SIZE 80
struct fc_host_attrs {
/* Fixed Attributes */
u64 node_name;
u64 port_name;
u64 permanent_port_name;
u32 supported_classes;
u8 supported_fc4s[FC_FC4_LIST_SIZE];
u32 supported_speeds;
u32 maxframe_size;
u16 max_npiv_vports;
char serial_number[FC_SERIAL_NUMBER_SIZE];
/* Dynamic Attributes */
u32 port_id;
enum fc_port_type port_type;
enum fc_port_state port_state;
u8 active_fc4s[FC_FC4_LIST_SIZE];
u32 speed;
u64 fabric_name;
char symbolic_name[FC_SYMBOLIC_NAME_SIZE];
char system_hostname[FC_SYMBOLIC_NAME_SIZE];
/* Private (Transport-managed) Attributes */
enum fc_tgtid_binding_type tgtid_bind_type;
/* internal data */
struct list_head rports;
struct list_head rport_bindings;
struct list_head vports;
u32 next_rport_number;
u32 next_target_id;
u32 next_vport_number;
u16 npiv_vports_inuse;
/* work queues for rport state manipulation */
char work_q_name[20];
struct workqueue_struct *work_q;
char devloss_work_q_name[20];
struct workqueue_struct *devloss_work_q;
};
#define shost_to_fc_host(x) \
((struct fc_host_attrs *)(x)->shost_data)
#define fc_host_node_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->node_name)
#define fc_host_port_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->port_name)
#define fc_host_permanent_port_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->permanent_port_name)
#define fc_host_supported_classes(x) \
(((struct fc_host_attrs *)(x)->shost_data)->supported_classes)
#define fc_host_supported_fc4s(x) \
(((struct fc_host_attrs *)(x)->shost_data)->supported_fc4s)
#define fc_host_supported_speeds(x) \
(((struct fc_host_attrs *)(x)->shost_data)->supported_speeds)
#define fc_host_maxframe_size(x) \
(((struct fc_host_attrs *)(x)->shost_data)->maxframe_size)
#define fc_host_max_npiv_vports(x) \
(((struct fc_host_attrs *)(x)->shost_data)->max_npiv_vports)
#define fc_host_serial_number(x) \
(((struct fc_host_attrs *)(x)->shost_data)->serial_number)
#define fc_host_port_id(x) \
(((struct fc_host_attrs *)(x)->shost_data)->port_id)
#define fc_host_port_type(x) \
(((struct fc_host_attrs *)(x)->shost_data)->port_type)
#define fc_host_port_state(x) \
(((struct fc_host_attrs *)(x)->shost_data)->port_state)
#define fc_host_active_fc4s(x) \
(((struct fc_host_attrs *)(x)->shost_data)->active_fc4s)
#define fc_host_speed(x) \
(((struct fc_host_attrs *)(x)->shost_data)->speed)
#define fc_host_fabric_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->fabric_name)
#define fc_host_symbolic_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->symbolic_name)
#define fc_host_system_hostname(x) \
(((struct fc_host_attrs *)(x)->shost_data)->system_hostname)
#define fc_host_tgtid_bind_type(x) \
(((struct fc_host_attrs *)(x)->shost_data)->tgtid_bind_type)
#define fc_host_rports(x) \
(((struct fc_host_attrs *)(x)->shost_data)->rports)
#define fc_host_rport_bindings(x) \
(((struct fc_host_attrs *)(x)->shost_data)->rport_bindings)
#define fc_host_vports(x) \
(((struct fc_host_attrs *)(x)->shost_data)->vports)
#define fc_host_next_rport_number(x) \
(((struct fc_host_attrs *)(x)->shost_data)->next_rport_number)
#define fc_host_next_target_id(x) \
(((struct fc_host_attrs *)(x)->shost_data)->next_target_id)
#define fc_host_next_vport_number(x) \
(((struct fc_host_attrs *)(x)->shost_data)->next_vport_number)
#define fc_host_npiv_vports_inuse(x) \
(((struct fc_host_attrs *)(x)->shost_data)->npiv_vports_inuse)
#define fc_host_work_q_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->work_q_name)
#define fc_host_work_q(x) \
(((struct fc_host_attrs *)(x)->shost_data)->work_q)
#define fc_host_devloss_work_q_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->devloss_work_q_name)
#define fc_host_devloss_work_q(x) \
(((struct fc_host_attrs *)(x)->shost_data)->devloss_work_q)
/* The functions by which the transport class and the driver communicate */
struct fc_function_template {
void (*get_rport_dev_loss_tmo)(struct fc_rport *);
void (*set_rport_dev_loss_tmo)(struct fc_rport *, u32);
void (*get_starget_node_name)(struct scsi_target *);
void (*get_starget_port_name)(struct scsi_target *);
void (*get_starget_port_id)(struct scsi_target *);
void (*get_host_port_id)(struct Scsi_Host *);
void (*get_host_port_type)(struct Scsi_Host *);
void (*get_host_port_state)(struct Scsi_Host *);
void (*get_host_active_fc4s)(struct Scsi_Host *);
void (*get_host_speed)(struct Scsi_Host *);
void (*get_host_fabric_name)(struct Scsi_Host *);
void (*get_host_symbolic_name)(struct Scsi_Host *);
void (*set_host_system_hostname)(struct Scsi_Host *);
struct fc_host_statistics * (*get_fc_host_stats)(struct Scsi_Host *);
void (*reset_fc_host_stats)(struct Scsi_Host *);
int (*issue_fc_host_lip)(struct Scsi_Host *);
void (*dev_loss_tmo_callbk)(struct fc_rport *);
void (*terminate_rport_io)(struct fc_rport *);
void (*set_vport_symbolic_name)(struct fc_vport *);
int (*vport_create)(struct fc_vport *, bool);
int (*vport_disable)(struct fc_vport *, bool);
int (*vport_delete)(struct fc_vport *);
/* target-mode drivers' functions */
int (* tsk_mgmt_response)(struct Scsi_Host *, u64, u64, int);
int (* it_nexus_response)(struct Scsi_Host *, u64, int);
/* allocation lengths for host-specific data */
u32 dd_fcrport_size;
u32 dd_fcvport_size;
/*
* The driver sets these to tell the transport class it
* wants the attributes displayed in sysfs. If the show_ flag
* is not set, the attribute will be private to the transport
* class
*/
/* remote port fixed attributes */
unsigned long show_rport_maxframe_size:1;
unsigned long show_rport_supported_classes:1;
unsigned long show_rport_dev_loss_tmo:1;
/*
* target dynamic attributes
* These should all be "1" if the driver uses the remote port
* add/delete functions (so attributes reflect rport values).
*/
unsigned long show_starget_node_name:1;
unsigned long show_starget_port_name:1;
unsigned long show_starget_port_id:1;
/* host fixed attributes */
unsigned long show_host_node_name:1;
unsigned long show_host_port_name:1;
unsigned long show_host_permanent_port_name:1;
unsigned long show_host_supported_classes:1;
unsigned long show_host_supported_fc4s:1;
unsigned long show_host_supported_speeds:1;
unsigned long show_host_maxframe_size:1;
unsigned long show_host_serial_number:1;
/* host dynamic attributes */
unsigned long show_host_port_id:1;
unsigned long show_host_port_type:1;
unsigned long show_host_port_state:1;
unsigned long show_host_active_fc4s:1;
unsigned long show_host_speed:1;
unsigned long show_host_fabric_name:1;
unsigned long show_host_symbolic_name:1;
unsigned long show_host_system_hostname:1;
unsigned long disable_target_scan:1;
};
/**
* fc_remote_port_chkready - called to validate the remote port state
* prior to initiating io to the port.
*
* Returns a scsi result code that can be returned by the LLDD.
*
* @rport: remote port to be checked
**/
static inline int
fc_remote_port_chkready(struct fc_rport *rport)
{
int result;
switch (rport->port_state) {
case FC_PORTSTATE_ONLINE:
if (rport->roles & FC_PORT_ROLE_FCP_TARGET)
result = 0;
else if (rport->flags & FC_RPORT_DEVLOSS_PENDING)
result = DID_TRANSPORT_DISRUPTED << 16;
else
result = DID_NO_CONNECT << 16;
break;
case FC_PORTSTATE_BLOCKED:
if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT)
result = DID_TRANSPORT_FAILFAST << 16;
else
result = DID_TRANSPORT_DISRUPTED << 16;
break;
default:
result = DID_NO_CONNECT << 16;
break;
}
return result;
}
static inline u64 wwn_to_u64(u8 *wwn)
{
return (u64)wwn[0] << 56 | (u64)wwn[1] << 48 |
(u64)wwn[2] << 40 | (u64)wwn[3] << 32 |
(u64)wwn[4] << 24 | (u64)wwn[5] << 16 |
(u64)wwn[6] << 8 | (u64)wwn[7];
}
static inline void u64_to_wwn(u64 inm, u8 *wwn)
{
wwn[0] = (inm >> 56) & 0xff;
wwn[1] = (inm >> 48) & 0xff;
wwn[2] = (inm >> 40) & 0xff;
wwn[3] = (inm >> 32) & 0xff;
wwn[4] = (inm >> 24) & 0xff;
wwn[5] = (inm >> 16) & 0xff;
wwn[6] = (inm >> 8) & 0xff;
wwn[7] = inm & 0xff;
}
/**
* fc_vport_set_state() - called to set a vport's state. Saves the old state,
* excepting the transitory states of initializing and sending the ELS
* traffic to instantiate the vport on the link.
*
* Assumes the driver has surrounded this with the proper locking to ensure
* a coherent state change.
*
* @vport: virtual port whose state is changing
* @new_state: new state
**/
static inline void
fc_vport_set_state(struct fc_vport *vport, enum fc_vport_state new_state)
{
if ((new_state != FC_VPORT_UNKNOWN) &&
(new_state != FC_VPORT_INITIALIZING))
vport->vport_last_state = vport->vport_state;
vport->vport_state = new_state;
}
struct scsi_transport_template *fc_attach_transport(
struct fc_function_template *);
void fc_release_transport(struct scsi_transport_template *);
void fc_remove_host(struct Scsi_Host *);
struct fc_rport *fc_remote_port_add(struct Scsi_Host *shost,
int channel, struct fc_rport_identifiers *ids);
void fc_remote_port_delete(struct fc_rport *rport);
void fc_remote_port_rolechg(struct fc_rport *rport, u32 roles);
int scsi_is_fc_rport(const struct device *);
u32 fc_get_event_number(void);
void fc_host_post_event(struct Scsi_Host *shost, u32 event_number,
enum fc_host_event_code event_code, u32 event_data);
void fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number,
u32 data_len, char * data_buf, u64 vendor_id);
/* Note: when specifying vendor_id to fc_host_post_vendor_event()
* be sure to read the Vendor Type and ID formatting requirements
* specified in scsi_netlink.h
*/
struct fc_vport *fc_vport_create(struct Scsi_Host *shost, int channel,
struct fc_vport_identifiers *);
int fc_vport_terminate(struct fc_vport *vport);
#endif /* SCSI_TRANSPORT_FC_H */
