#include <asm/types.h>
#include <asm/ioctl.h>
#include <linux/usb/ch9.h>
/*
* Filesystem based user-mode API to USB Gadget controller hardware
*
* Almost everything can be done with only read and write operations,
* on endpoint files found in one directory. They are configured by
* writing descriptors, and then may be used for normal stream style
* i/o requests. When ep0 is configured, the device can enumerate;
* when it's closed, the device disconnects from usb.
*
* Configuration and device descriptors get written to /dev/gadget/$CHIP,
* which may then be used to read usb_gadgetfs_event structs. The driver
* may activate endpoints as it handles SET_CONFIGURATION setup events,
* or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
* then performing data transfers by reading or writing.
*/
/*
* Events are delivered on the ep0 file descriptor, if the user mode driver
* reads from this file descriptor after writing the descriptors. Don't
* stop polling this descriptor, if you write that kind of driver.
*/
enum usb_gadgetfs_event_type {
GADGETFS_NOP = 0,
GADGETFS_CONNECT,
GADGETFS_DISCONNECT,
GADGETFS_SETUP,
GADGETFS_SUSPEND,
// and likely more !
};
struct usb_gadgetfs_event {
enum usb_gadgetfs_event_type type;
union {
// NOP, DISCONNECT, SUSPEND: nothing
// ... some hardware can't report disconnection
// CONNECT: just the speed
enum usb_device_speed speed;
// SETUP: packet; DATA phase i/o precedes next event
// (setup.bmRequestType & USB_DIR_IN) flags direction
// ... includes SET_CONFIGURATION, SET_INTERFACE
struct usb_ctrlrequest setup;
} u;
};
/* endpoint ioctls */
/* IN transfers may be reported to the gadget driver as complete
* when the fifo is loaded, before the host reads the data;
* OUT transfers may be reported to the host's "client" driver as
* complete when they're sitting in the FIFO unread.
* THIS returns how many bytes are "unclaimed" in the endpoint fifo
* (needed for precise fault handling, when the hardware allows it)
*/
#define GADGETFS_FIFO_STATUS _IO('g',1)
/* discards any unclaimed data in the fifo. */
#define GADGETFS_FIFO_FLUSH _IO('g',2)
/* resets endpoint halt+toggle; used to implement set_interface.
* some hardware (like pxa2xx) can't support this.
*/
#define GADGETFS_CLEAR_HALT _IO('g',3)
