#ifndef _POWERPC_PROM_H
#define _POWERPC_PROM_H
#ifdef __KERNEL__
/*
* Definitions for talking to the Open Firmware PROM on
* Power Macintosh computers.
*
* Copyright (C) 1996-2005 Paul Mackerras.
*
* Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/platform_device.h>
#include <asm/atomic.h>
/* Definitions used by the flattened device tree */
#define OF_DT_HEADER 0xd00dfeed /* marker */
#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */
#define OF_DT_END_NODE 0x2 /* End node */
#define OF_DT_PROP 0x3 /* Property: name off, size,
* content */
#define OF_DT_NOP 0x4 /* nop */
#define OF_DT_END 0x9
#define OF_DT_VERSION 0x10
/*
* This is what gets passed to the kernel by prom_init or kexec
*
* The dt struct contains the device tree structure, full pathes and
* property contents. The dt strings contain a separate block with just
* the strings for the property names, and is fully page aligned and
* self contained in a page, so that it can be kept around by the kernel,
* each property name appears only once in this page (cheap compression)
*
* the mem_rsvmap contains a map of reserved ranges of physical memory,
* passing it here instead of in the device-tree itself greatly simplifies
* the job of everybody. It's just a list of u64 pairs (base/size) that
* ends when size is 0
*/
struct boot_param_header
{
u32 magic; /* magic word OF_DT_HEADER */
u32 totalsize; /* total size of DT block */
u32 off_dt_struct; /* offset to structure */
u32 off_dt_strings; /* offset to strings */
u32 off_mem_rsvmap; /* offset to memory reserve map */
u32 version; /* format version */
u32 last_comp_version; /* last compatible version */
/* version 2 fields below */
u32 boot_cpuid_phys; /* Physical CPU id we're booting on */
/* version 3 fields below */
u32 dt_strings_size; /* size of the DT strings block */
};
typedef u32 phandle;
typedef u32 ihandle;
struct property {
char *name;
int length;
unsigned char *value;
struct property *next;
};
struct device_node {
const char *name;
const char *type;
phandle node;
phandle linux_phandle;
char *full_name;
struct property *properties;
struct property *deadprops; /* removed properties */
struct device_node *parent;
struct device_node *child;
struct device_node *sibling;
struct device_node *next; /* next device of same type */
struct device_node *allnext; /* next in list of all nodes */
struct proc_dir_entry *pde; /* this node's proc directory */
struct kref kref;
unsigned long _flags;
void *data;
};
extern struct device_node *of_chosen;
/* flag descriptions */
#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
#define HAVE_ARCH_DEVTREE_FIXUPS
static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
{
dn->pde = de;
}
/* OBSOLETE: Old style node lookup */
extern struct device_node *find_devices(const char *name);
extern struct device_node *find_type_devices(const char *type);
extern struct device_node *find_path_device(const char *path);
extern struct device_node *find_compatible_devices(const char *type,
const char *compat);
extern struct device_node *find_all_nodes(void);
/* New style node lookup */
extern struct device_node *of_find_node_by_name(struct device_node *from,
const char *name);
#define for_each_node_by_name(dn, name) \
for (dn = of_find_node_by_name(NULL, name); dn; \
dn = of_find_node_by_name(dn, name))
extern struct device_node *of_find_node_by_type(struct device_node *from,
const char *type);
#define for_each_node_by_type(dn, type) \
for (dn = of_find_node_by_type(NULL, type); dn; \
dn = of_find_node_by_type(dn, type))
extern struct device_node *of_find_compatible_node(struct device_node *from,
const char *type, const char *compat);
extern struct device_node *of_find_node_by_path(const char *path);
extern struct device_node *of_find_node_by_phandle(phandle handle);
extern struct device_node *of_find_all_nodes(struct device_node *prev);
extern struct device_node *of_get_parent(const struct device_node *node);
extern struct device_node *of_get_next_child(const struct device_node *node,
struct device_node *prev);
extern struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp);
extern struct device_node *of_node_get(struct device_node *node);
extern void of_node_put(struct device_node *node);
/* For scanning the flat device-tree at boot time */
extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
const char *uname, int depth,
void *data),
void *data);
extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
unsigned long *size);
extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
extern unsigned long __init of_get_flat_dt_root(void);
/* For updating the device tree at runtime */
extern void of_attach_node(struct device_node *);
extern void of_detach_node(const struct device_node *);
/* Other Prototypes */
extern void finish_device_tree(void);
extern void unflatten_device_tree(void);
extern void early_init_devtree(void *);
extern int device_is_compatible(const struct device_node *device,
const char *);
extern int machine_is_compatible(const char *compat);
extern const void *get_property(const struct device_node *node,
const char *name,
int *lenp);
extern void print_properties(struct device_node *node);
extern int prom_n_addr_cells(struct device_node* np);
extern int prom_n_size_cells(struct device_node* np);
extern int prom_n_intr_cells(struct device_node* np);
extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
extern int prom_add_property(struct device_node* np, struct property* prop);
extern int prom_remove_property(struct device_node *np, struct property *prop);
extern int prom_update_property(struct device_node *np,
struct property *newprop,
struct property *oldprop);
#ifdef CONFIG_PPC32
/*
* PCI <-> OF matching functions
* (XXX should these be here?)
*/
struct pci_bus;
struct pci_dev;
extern int pci_device_from_OF_node(struct device_node *node,
u8* bus, u8* devfn);
extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
extern void pci_create_OF_bus_map(void);
#endif
extern struct resource *request_OF_resource(struct device_node* node,
int index, const char* name_postfix);
extern int release_OF_resource(struct device_node* node, int index);
/*
* OF address retreival & translation
*/
/* Helper to read a big number; size is in cells (not bytes) */
static inline u64 of_read_number(const u32 *cell, int size)
{
u64 r = 0;
while (size--)
r = (r << 32) | *(cell++);
return r;
}
/* Like of_read_number, but we want an unsigned long result */
#ifdef CONFIG_PPC32
static inline unsigned long of_read_ulong(const u32 *cell, int size)
{
return cell[size-1];
}
#else
#define of_read_ulong(cell, size) of_read_number(cell, size)
#endif
/* Translate an OF address block into a CPU physical address
*/
#define OF_BAD_ADDR ((u64)-1)
extern u64 of_translate_address(struct device_node *np, const u32 *addr);
/* Extract an address from a device, returns the region size and
* the address space flags too. The PCI version uses a BAR number
* instead of an absolute index
*/
extern const u32 *of_get_address(struct device_node *dev, int index,
u64 *size, unsigned int *flags);
extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
u64 *size, unsigned int *flags);
/* Get an address as a resource. Note that if your address is
* a PIO address, the conversion will fail if the physical address
* can't be internally converted to an IO token with
* pci_address_to_pio(), that is because it's either called to early
* or it can't be matched to any host bridge IO space
*/
extern int of_address_to_resource(struct device_node *dev, int index,
struct resource *r);
extern int of_pci_address_to_resource(struct device_node *dev, int bar,
struct resource *r);
/* Parse the ibm,dma-window property of an OF node into the busno, phys and
* size parameters.
*/
void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
unsigned long *busno, unsigned long *phys, unsigned long *size);
extern void kdump_move_device_tree(void);
/* CPU OF node matching */
struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
/* Get the MAC address */
extern const void *of_get_mac_address(struct device_node *np);
/*
* OF interrupt mapping
*/
/* This structure is returned when an interrupt is mapped. The controller
* field needs to be put() after use
*/
#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
struct of_irq {
struct device_node *controller; /* Interrupt controller node */
u32 size; /* Specifier size */
u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
};
/**
* of_irq_map_init - Initialize the irq remapper
* @flags: flags defining workarounds to enable
*
* Some machines have bugs in the device-tree which require certain workarounds
* to be applied. Call this before any interrupt mapping attempts to enable
* those workarounds.
*/
#define OF_IMAP_OLDWORLD_MAC 0x00000001
#define OF_IMAP_NO_PHANDLE 0x00000002
extern void of_irq_map_init(unsigned int flags);
/**
* of_irq_map_raw - Low level interrupt tree parsing
* @parent: the device interrupt parent
* @intspec: interrupt specifier ("interrupts" property of the device)
* @ointsize: size of the passed in interrupt specifier
* @addr: address specifier (start of "reg" property of the device)
* @out_irq: structure of_irq filled by this function
*
* Returns 0 on success and a negative number on error
*
* This function is a low-level interrupt tree walking function. It
* can be used to do a partial walk with synthetized reg and interrupts
* properties, for example when resolving PCI interrupts when no device
* node exist for the parent.
*
*/
extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
u32 ointsize, const u32 *addr,
struct of_irq *out_irq);
/**
* of_irq_map_one - Resolve an interrupt for a device
* @device: the device whose interrupt is to be resolved
* @index: index of the interrupt to resolve
* @out_irq: structure of_irq filled by this function
*
* This function resolves an interrupt, walking the tree, for a given
* device-tree node. It's the high level pendant to of_irq_map_raw().
* It also implements the workarounds for OldWolrd Macs.
*/
extern int of_irq_map_one(struct device_node *device, int index,
struct of_irq *out_irq);
/**
* of_irq_map_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
* @out_irq: structure of_irq filled by this function
*
* This function resolves the PCI interrupt for a given PCI device. If a
* device-node exists for a given pci_dev, it will use normal OF tree
* walking. If not, it will implement standard swizzling and walk up the
* PCI tree until an device-node is found, at which point it will finish
* resolving using the OF tree walking.
*/
struct pci_dev;
extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
static inline int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
{
int irq = irq_of_parse_and_map(dev, index);
/* Only dereference the resource if both the
* resource and the irq are valid. */
if (r && irq != NO_IRQ) {
r->start = r->end = irq;
r->flags = IORESOURCE_IRQ;
}
return irq;
}
#endif /* __KERNEL__ */
#endif /* _POWERPC_PROM_H */
