/*
* MUSB OTG peripheral driver ep0 handling
*
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
* Copyright (C) 2006-2007 Nokia Corporation
* Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include "musb_core.h"
/* ep0 is always musb->endpoints[0].ep_in */
#define next_ep0_request(musb) next_in_request(&(musb)->endpoints[0])
/*
* locking note: we use only the controller lock, for simpler correctness.
* It's always held with IRQs blocked.
*
* It protects the ep0 request queue as well as ep0_state, not just the
* controller and indexed registers. And that lock stays held unless it
* needs to be dropped to allow reentering this driver ... like upcalls to
* the gadget driver, or adjusting endpoint halt status.
*/
static char *decode_ep0stage(u8 stage)
{
switch (stage) {
case MUSB_EP0_STAGE_IDLE: return "idle";
case MUSB_EP0_STAGE_SETUP: return "setup";
case MUSB_EP0_STAGE_TX: return "in";
case MUSB_EP0_STAGE_RX: return "out";
case MUSB_EP0_STAGE_ACKWAIT: return "wait";
case MUSB_EP0_STAGE_STATUSIN: return "in/status";
case MUSB_EP0_STAGE_STATUSOUT: return "out/status";
default: return "?";
}
}
/* handle a standard GET_STATUS request
* Context: caller holds controller lock
*/
static int service_tx_status_request(
struct musb *musb,
const struct usb_ctrlrequest *ctrlrequest)
{
void __iomem *mbase = musb->mregs;
int handled = 1;
u8 result[2], epnum = 0;
const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
result[1] = 0;
switch (recip) {
case USB_RECIP_DEVICE:
result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
#ifdef CONFIG_USB_MUSB_OTG
if (musb->g.is_otg) {
result[0] |= musb->g.b_hnp_enable
<< USB_DEVICE_B_HNP_ENABLE;
result[0] |= musb->g.a_alt_hnp_support
<< USB_DEVICE_A_ALT_HNP_SUPPORT;
result[0] |= musb->g.a_hnp_support
<< USB_DEVICE_A_HNP_SUPPORT;
}
#endif
break;
case USB_RECIP_INTERFACE:
result[0] = 0;
break;
case USB_RECIP_ENDPOINT: {
int is_in;
struct musb_ep *ep;
u16 tmp;
void __iomem *regs;
epnum = (u8) ctrlrequest->wIndex;
if (!epnum) {
result[0] = 0;
break;
}
is_in = epnum & USB_DIR_IN;
if (is_in) {
epnum &= 0x0f;
ep = &musb->endpoints[epnum].ep_in;
} else {
ep = &musb->endpoints[epnum].ep_out;
}
regs = musb->endpoints[epnum].regs;
if (epnum >= MUSB_C_NUM_EPS || !ep->desc) {
handled = -EINVAL;
break;
}
musb_ep_select(mbase, epnum);
if (is_in)
tmp = musb_readw(regs, MUSB_TXCSR)
& MUSB_TXCSR_P_SENDSTALL;
else
tmp = musb_readw(regs, MUSB_RXCSR)
& MUSB_RXCSR_P_SENDSTALL;
musb_ep_select(mbase, 0);
result[0] = tmp ? 1 : 0;
} break;
default:
/* class, vendor, etc ... delegate */
handled = 0;
break;
}
/* fill up the fifo; caller updates csr0 */
if (handled > 0) {
u16 len = le16_to_cpu(ctrlrequest->wLength);
if (len > 2)
len = 2;
musb_write_fifo(&musb->endpoints[0], len, result);
}
return handled;
}
/*
* handle a control-IN request, the end0 buffer contains the current request
* that is supposed to be a standard control request. Assumes the fifo to
* be at least 2 bytes long.
*
* @return 0 if the request was NOT HANDLED,
* < 0 when error
* > 0 when the request is processed
*
* Context: caller holds controller lock
*/
static int
service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
{
int handled = 0; /* not handled */
if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
== USB_TYPE_STANDARD) {
switch (ctrlrequest->bRequest) {
case USB_REQ_GET_STATUS:
handled = service_tx_status_request(musb,
ctrlrequest);
break;
/* case USB_REQ_SYNC_FRAME: */
default:
break;
}
}
return handled;
}
/*
* Context: caller holds controller lock
*/
static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req)
{
musb_g_giveback(&musb->endpoints[0].ep_in, req, 0);
musb->ep0_state = MUSB_EP0_STAGE_SETUP;
}
/*
* Tries to start B-device HNP negotiation if enabled via sysfs
*/
static inline void musb_try_b_hnp_enable(struct musb *musb)
{
void __iomem *mbase = musb->mregs;
u8 devctl;
DBG(1, "HNP: Setting HR\n");
devctl = musb_readb(mbase, MUSB_DEVCTL);
musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
}
/*
* Handle all control requests with no DATA stage, including standard
* requests such as:
* USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized
* always delegated to the gadget driver
* USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE
* always handled here, except for class/vendor/... features
*
* Context: caller holds controller lock
*/
static int
service_zero_data_request(struct musb *musb,
struct usb_ctrlrequest *ctrlrequest)
__releases(musb->lock)
__acquires(musb->lock)
{
int handled = -EINVAL;
void __iomem *mbase = musb->mregs;
const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
/* the gadget driver handles everything except what we MUST handle */
if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
== USB_TYPE_STANDARD) {
switch (ctrlrequest->bRequest) {
case USB_REQ_SET_ADDRESS:
/* change it after the status stage */
musb->set_address = true;
musb->address = (u8) (ctrlrequest->wValue & 0x7f);
handled = 1;
break;
case USB_REQ_CLEAR_FEATURE:
switch (recip) {
case USB_RECIP_DEVICE:
if (ctrlrequest->wValue
!= USB_DEVICE_REMOTE_WAKEUP)
break;
musb->may_wakeup = 0;
handled = 1;
break;
case USB_RECIP_INTERFACE:
break;
case USB_RECIP_ENDPOINT:{
const u8 num = ctrlrequest->wIndex & 0x0f;
struct musb_ep *musb_ep;
if (num == 0
|| num >= MUSB_C_NUM_EPS
|| ctrlrequest->wValue
!= USB_ENDPOINT_HALT)
break;
if (ctrlrequest->wIndex & USB_DIR_IN)
musb_ep = &musb->endpoints[num].ep_in;
else
musb_ep = &musb->endpoints[num].ep_out;
if (!musb_ep->desc)
break;
/* REVISIT do it directly, no locking games */
spin_unlock(&musb->lock);
musb_gadget_set_halt(&musb_ep->end_point, 0);
spin_lock(&musb->lock);
/* select ep0 again */
musb_ep_select(mbase, 0);
handled = 1;
} break;
default:
/* class, vendor, etc ... delegate */
handled = 0;
break;
}
break;
case USB_REQ_SET_FEATURE:
switch (recip) {
case USB_RECIP_DEVICE:
handled = 1;
switch (ctrlrequest->wValue) {
case USB_DEVICE_REMOTE_WAKEUP:
musb->may_wakeup = 1;
break;
case USB_DEVICE_TEST_MODE:
if (musb->g.speed != USB_SPEED_HIGH)
goto stall;
if (ctrlrequest->wIndex & 0xff)
goto stall;
switch (ctrlrequest->wIndex >> 8) {
case 1:
pr_debug("TEST_J\n");
/* TEST_J */
musb->test_mode_nr =
MUSB_TEST_J;
break;
case 2:
/* TEST_K */
pr_debug("TEST_K\n");
musb->test_mode_nr =
MUSB_TEST_K;
break;
case 3:
/* TEST_SE0_NAK */
pr_debug("TEST_SE0_NAK\n");
musb->test_mode_nr =
MUSB_TEST_SE0_NAK;
break;
case 4:
/* TEST_PACKET */
pr_debug("TEST_PACKET\n");
musb->test_mode_nr =
MUSB_TEST_PACKET;
break;
default:
goto stall;
}
/* enter test mode after irq */
if (handled > 0)
musb->test_mode = true;
break;
#ifdef CONFIG_USB_MUSB_OTG
case USB_DEVICE_B_HNP_ENABLE:
if (!musb->g.is_otg)
goto stall;
musb->g.b_hnp_enable = 1;
musb_try_b_hnp_enable(musb);
break;
case USB_DEVICE_A_HNP_SUPPORT:
if (!musb->g.is_otg)
goto stall;
musb->g.a_hnp_support = 1;
break;
case USB_DEVICE_A_ALT_HNP_SUPPORT:
if (!musb->g.is_otg)
goto stall;
musb->g.a_alt_hnp_support = 1;
break;
#endif
stall:
default:
handled = -EINVAL;
break;
}
break;
case USB_RECIP_INTERFACE:
break;
case USB_RECIP_ENDPOINT:{
const u8 epnum =
ctrlrequest->wIndex & 0x0f;
struct musb_ep *musb_ep;
struct musb_hw_ep *ep;
void __iomem *regs;
int is_in;
u16 csr;
if (epnum == 0
|| epnum >= MUSB_C_NUM_EPS
|| ctrlrequest->wValue
!= USB_ENDPOINT_HALT)
break;
ep = musb->endpoints + epnum;
regs = ep->regs;
is_in = ctrlrequest->wIndex & USB_DIR_IN;
if (is_in)
musb_ep = &ep->ep_in;
else
musb_ep = &ep->ep_out;
if (!musb_ep->desc)
break;
musb_ep_select(mbase, epnum);
if (is_in) {
csr = musb_readw(regs,
MUSB_TXCSR);
if (csr & MUSB_TXCSR_FIFONOTEMPTY)
csr |= MUSB_TXCSR_FLUSHFIFO;
csr |= MUSB_TXCSR_P_SENDSTALL
| MUSB_TXCSR_CLRDATATOG
| MUSB_TXCSR_P_WZC_BITS;
musb_writew(regs, MUSB_TXCSR,
csr);
} else {
csr = musb_readw(regs,
MUSB_RXCSR);
csr |= MUSB_RXCSR_P_SENDSTALL
| MUSB_RXCSR_FLUSHFIFO
| MUSB_RXCSR_CLRDATATOG
| MUSB_TXCSR_P_WZC_BITS;
musb_writew(regs, MUSB_RXCSR,
csr);
}
/* select ep0 again */
musb_ep_select(mbase, 0);
handled = 1;
} break;
default:
/* class, vendor, etc ... delegate */
handled = 0;
break;
}
break;
default:
/* delegate SET_CONFIGURATION, etc */
handled = 0;
}
} else
handled = 0;
return handled;
}
/* we have an ep0out data packet
* Context: caller holds controller lock
*/
static void ep0_rxstate(struct musb *musb)
{
void __iomem *regs = musb->control_ep->regs;
struct usb_request *req;
u16 count, csr;
req = next_ep0_request(musb);
/* read packet and ack; or stall because of gadget driver bug:
* should have provided the rx buffer before setup() returned.
*/
if (req) {
void *buf = req->buf + req->actual;
unsigned len = req->length - req->actual;
/* read the buffer */
count = musb_readb(regs, MUSB_COUNT0);
if (count > len) {
req->status = -EOVERFLOW;
count = len;
}
musb_read_fifo(&musb->endpoints[0], count, buf);
req->actual += count;
csr = MUSB_CSR0_P_SVDRXPKTRDY;
if (count < 64 || req->actual == req->length) {
musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
csr |= MUSB_CSR0_P_DATAEND;
} else
req = NULL;
} else
csr = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL;
/* Completion handler may choose to stall, e.g. because the
* message just received holds invalid data.
*/
if (req) {
musb->ackpend = csr;
musb_g_ep0_giveback(musb, req);
if (!musb->ackpend)
return;
musb->ackpend = 0;
}
musb_ep_select(musb->mregs, 0);
musb_writew(regs, MUSB_CSR0, csr);
}
/*
* transmitting to the host (IN), this code might be called from IRQ
* and from kernel thread.
*
* Context: caller holds controller lock
*/
static void ep0_txstate(struct musb *musb)
{
void __iomem *regs = musb->control_ep->regs;
struct usb_request *request = next_ep0_request(musb);
u16 csr = MUSB_CSR0_TXPKTRDY;
u8 *fifo_src;
u8 fifo_count;
if (!request) {
/* WARN_ON(1); */
DBG(2, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
return;
}
/* load the data */
fifo_src = (u8 *) request->buf + request->actual;
fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
request->length - request->actual);
musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
request->actual += fifo_count;
/* update the flags */
if (fifo_count < MUSB_MAX_END0_PACKET
|| request->actual == request->length) {
musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
csr |= MUSB_CSR0_P_DATAEND;
} else
request = NULL;
/* report completions as soon as the fifo's loaded; there's no
* win in waiting till this last packet gets acked. (other than
* very precise fault reporting, needed by USB TMC; possible with
* this hardware, but not usable from portable gadget drivers.)
*/
if (request) {
musb->ackpend = csr;
musb_g_ep0_giveback(musb, request);
if (!musb->ackpend)
return;
musb->ackpend = 0;
}
/* send it out, triggering a "txpktrdy cleared" irq */
musb_ep_select(musb->mregs, 0);
musb_writew(regs, MUSB_CSR0, csr);
}
/*
* Read a SETUP packet (struct usb_ctrlrequest) from the hardware.
* Fields are left in USB byte-order.
*
* Context: caller holds controller lock.
*/
static void
musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
{
struct usb_request *r;
void __iomem *regs = musb->control_ep->regs;
musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
/* NOTE: earlier 2.6 versions changed setup packets to host
* order, but now USB packets always stay in USB byte order.
*/
DBG(3, "SETUP req%02x.%02x v%04x i%04x l%d\n",
req->bRequestType,
req->bRequest,
le16_to_cpu(req->wValue),
le16_to_cpu(req->wIndex),
le16_to_cpu(req->wLength));
/* clean up any leftover transfers */
r = next_ep0_request(musb);
if (r)
musb_g_ep0_giveback(musb, r);
/* For zero-data requests we want to delay the STATUS stage to
* avoid SETUPEND errors. If we read data (OUT), delay accepting
* packets until there's a buffer to store them in.
*
* If we write data, the controller acts happier if we enable
* the TX FIFO right away, and give the controller a moment
* to switch modes...
*/
musb->set_address = false;
musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
if (req->wLength == 0) {
if (req->bRequestType & USB_DIR_IN)
musb->ackpend |= MUSB_CSR0_TXPKTRDY;
musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
} else if (req->bRequestType & USB_DIR_IN) {
musb->ep0_state = MUSB_EP0_STAGE_TX;
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY);
while ((musb_readw(regs, MUSB_CSR0)
& MUSB_CSR0_RXPKTRDY) != 0)
cpu_relax();
musb->ackpend = 0;
} else
musb->ep0_state = MUSB_EP0_STAGE_RX;
}
static int
forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
__releases(musb->lock)
__acquires(musb->lock)
{
int retval;
if (!musb->gadget_driver)
return -EOPNOTSUPP;
spin_unlock(&musb->lock);
retval = musb->gadget_driver->setup(&musb->g, ctrlrequest);
spin_lock(&musb->lock);
return retval;
}
/*
* Handle peripheral ep0 interrupt
*
* Context: irq handler; we won't re-enter the driver that way.
*/
irqreturn_t musb_g_ep0_irq(struct musb *musb)
{
u16 csr;
u16 len;
void __iomem *mbase = musb->mregs;
void __iomem *regs = musb->endpoints[0].regs;
irqreturn_t retval = IRQ_NONE;
musb_ep_select(mbase, 0); /* select ep0 */
csr = musb_readw(regs, MUSB_CSR0);
len = musb_readb(regs, MUSB_COUNT0);
DBG(4, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
csr, len,
musb_readb(mbase, MUSB_FADDR),
decode_ep0stage(musb->ep0_state));
/* I sent a stall.. need to acknowledge it now.. */
if (csr & MUSB_CSR0_P_SENTSTALL) {
musb_writew(regs, MUSB_CSR0,
csr & ~MUSB_CSR0_P_SENTSTALL);
retval = IRQ_HANDLED;
musb->ep0_state = MUSB_EP0_STAGE_IDLE;
csr = musb_readw(regs, MUSB_CSR0);
}
/* request ended "early" */
if (csr & MUSB_CSR0_P_SETUPEND) {
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
retval = IRQ_HANDLED;
/* Transition into the early status phase */
switch (musb->ep0_state) {
case MUSB_EP0_STAGE_TX:
musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
break;
case MUSB_EP0_STAGE_RX:
musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
break;
default:
ERR("SetupEnd came in a wrong ep0stage %s",
decode_ep0stage(musb->ep0_state));
}
csr = musb_readw(regs, MUSB_CSR0);
/* NOTE: request may need completion */
}
/* docs from Mentor only describe tx, rx, and idle/setup states.
* we need to handle nuances around status stages, and also the
* case where status and setup stages come back-to-back ...
*/
switch (musb->ep0_state) {
case MUSB_EP0_STAGE_TX:
/* irq on clearing txpktrdy */
if ((csr & MUSB_CSR0_TXPKTRDY) == 0) {
ep0_txstate(musb);
retval = IRQ_HANDLED;
}
break;
case MUSB_EP0_STAGE_RX:
/* irq on set rxpktrdy */
if (csr & MUSB_CSR0_RXPKTRDY) {
ep0_rxstate(musb);
retval = IRQ_HANDLED;
}
break;
case MUSB_EP0_STAGE_STATUSIN:
/* end of sequence #2 (OUT/RX state) or #3 (no data) */
/* update address (if needed) only @ the end of the
* status phase per usb spec, which also guarantees
* we get 10 msec to receive this irq... until this
* is done we won't see the next packet.
*/
if (musb->set_address) {
musb->set_address = false;
musb_writeb(mbase, MUSB_FADDR, musb->address);
}
/* enter test mode if needed (exit by reset) */
else if (musb->test_mode) {
DBG(1, "entering TESTMODE\n");
if (MUSB_TEST_PACKET == musb->test_mode_nr)
musb_load_testpacket(musb);
musb_writeb(mbase, MUSB_TESTMODE,
musb->test_mode_nr);
}
/* FALLTHROUGH */
case MUSB_EP0_STAGE_STATUSOUT:
/* end of sequence #1: write to host (TX state) */
{
struct usb_request *req;
req = next_ep0_request(musb);
if (req)
musb_g_ep0_giveback(musb, req);
}
/*
* In case when several interrupts can get coalesced,
* check to see if we've already received a SETUP packet...
*/
if (csr & MUSB_CSR0_RXPKTRDY)
goto setup;
retval = IRQ_HANDLED;
musb->ep0_state = MUSB_EP0_STAGE_IDLE;
break;
case MUSB_EP0_STAGE_IDLE:
/*
* This state is typically (but not always) indiscernible
* from the status states since the corresponding interrupts
* tend to happen within too little period of time (with only
* a zero-length packet in between) and so get coalesced...
*/
retval = IRQ_HANDLED;
musb->ep0_state = MUSB_EP0_STAGE_SETUP;
/* FALLTHROUGH */
case MUSB_EP0_STAGE_SETUP:
setup:
if (csr & MUSB_CSR0_RXPKTRDY) {
struct usb_ctrlrequest setup;
int handled = 0;
if (len != 8) {
ERR("SETUP packet len %d != 8 ?\n", len);
break;
}
musb_read_setup(musb, &setup);
retval = IRQ_HANDLED;
/* sometimes the RESET won't be reported */
if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) {
u8 power;
printk(KERN_NOTICE "%s: peripheral reset "
"irq lost!\n",
musb_driver_name);
power = musb_readb(mbase, MUSB_POWER);
musb->g.speed = (power & MUSB_POWER_HSMODE)
? USB_SPEED_HIGH : USB_SPEED_FULL;
}
switch (musb->ep0_state) {
/* sequence #3 (no data stage), includes requests
* we can't forward (notably SET_ADDRESS and the
* device/endpoint feature set/clear operations)
* plus SET_CONFIGURATION and others we must
*/
case MUSB_EP0_STAGE_ACKWAIT:
handled = service_zero_data_request(
musb, &setup);
/* status stage might be immediate */
if (handled > 0) {
musb->ackpend |= MUSB_CSR0_P_DATAEND;
musb->ep0_state =
MUSB_EP0_STAGE_STATUSIN;
}
break;
/* sequence #1 (IN to host), includes GET_STATUS
* requests that we can't forward, GET_DESCRIPTOR
* and others that we must
*/
case MUSB_EP0_STAGE_TX:
handled = service_in_request(musb, &setup);
if (handled > 0) {
musb->ackpend = MUSB_CSR0_TXPKTRDY
| MUSB_CSR0_P_DATAEND;
musb->ep0_state =
MUSB_EP0_STAGE_STATUSOUT;
}
break;
/* sequence #2 (OUT from host), always forward */
default: /* MUSB_EP0_STAGE_RX */
break;
}
DBG(3, "handled %d, csr %04x, ep0stage %s\n",
handled, csr,
decode_ep0stage(musb->ep0_state));
/* unless we need to delegate this to the gadget
* driver, we know how to wrap this up: csr0 has
* not yet been written.
*/
if (handled < 0)
goto stall;
else if (handled > 0)
goto finish;
handled = forward_to_driver(musb, &setup);
if (handled < 0) {
musb_ep_select(mbase, 0);
stall:
DBG(3, "stall (%d)\n", handled);
musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
musb->ep0_state = MUSB_EP0_STAGE_IDLE;
finish:
musb_writew(regs, MUSB_CSR0,
musb->ackpend);
musb->ackpend = 0;
}
}
break;
case MUSB_EP0_STAGE_ACKWAIT:
/* This should not happen. But happens with tusb6010 with
* g_file_storage and high speed. Do nothing.
*/
retval = IRQ_HANDLED;
break;
default:
/* "can't happen" */
WARN_ON(1);
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
musb->ep0_state = MUSB_EP0_STAGE_IDLE;
break;
}
return retval;
}
static int
musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
{
/* always enabled */
return -EINVAL;
}
static int musb_g_ep0_disable(struct usb_ep *e)
{
/* always enabled */
return -EINVAL;
}
static int
musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
{
struct musb_ep *ep;
struct musb_request *req;
struct musb *musb;
int status;
unsigned long lockflags;
void __iomem *regs;
if (!e || !r)
return -EINVAL;
ep = to_musb_ep(e);
musb = ep->musb;
regs = musb->control_ep->regs;
req = to_musb_request(r);
req->musb = musb;
req->request.actual = 0;
req->request.status = -EINPROGRESS;
req->tx = ep->is_in;
spin_lock_irqsave(&musb->lock, lockflags);
if (!list_empty(&ep->req_list)) {
status = -EBUSY;
goto cleanup;
}
switch (musb->ep0_state) {
case MUSB_EP0_STAGE_RX: /* control-OUT data */
case MUSB_EP0_STAGE_TX: /* control-IN data */
case MUSB_EP0_STAGE_ACKWAIT: /* zero-length data */
status = 0;
break;
default:
DBG(1, "ep0 request queued in state %d\n",
musb->ep0_state);
status = -EINVAL;
goto cleanup;
}
/* add request to the list */
list_add_tail(&(req->request.list), &(ep->req_list));
DBG(3, "queue to %s (%s), length=%d\n",
ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
req->request.length);
musb_ep_select(musb->mregs, 0);
/* sequence #1, IN ... start writing the data */
if (musb->ep0_state == MUSB_EP0_STAGE_TX)
ep0_txstate(musb);
/* sequence #3, no-data ... issue IN status */
else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) {
if (req->request.length)
status = -EINVAL;
else {
musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
musb_writew(regs, MUSB_CSR0,
musb->ackpend | MUSB_CSR0_P_DATAEND);
musb->ackpend = 0;
musb_g_ep0_giveback(ep->musb, r);
}
/* else for sequence #2 (OUT), caller provides a buffer
* before the next packet arrives. deferred responses
* (after SETUP is acked) are racey.
*/
} else if (musb->ackpend) {
musb_writew(regs, MUSB_CSR0, musb->ackpend);
musb->ackpend = 0;
}
cleanup:
spin_unlock_irqrestore(&musb->lock, lockflags);
return status;
}
static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
{
/* we just won't support this */
return -EINVAL;
}
static int musb_g_ep0_halt(struct usb_ep *e, int value)
{
struct musb_ep *ep;
struct musb *musb;
void __iomem *base, *regs;
unsigned long flags;
int status;
u16 csr;
if (!e || !value)
return -EINVAL;
ep = to_musb_ep(e);
musb = ep->musb;
base = musb->mregs;
regs = musb->control_ep->regs;
status = 0;
spin_lock_irqsave(&musb->lock, flags);
if (!list_empty(&ep->req_list)) {
status = -EBUSY;
goto cleanup;
}
musb_ep_select(base, 0);
csr = musb->ackpend;
switch (musb->ep0_state) {
/* Stalls are usually issued after parsing SETUP packet, either
* directly in irq context from setup() or else later.
*/
case MUSB_EP0_STAGE_TX: /* control-IN data */
case MUSB_EP0_STAGE_ACKWAIT: /* STALL for zero-length data */
case MUSB_EP0_STAGE_RX: /* control-OUT data */
csr = musb_readw(regs, MUSB_CSR0);
/* FALLTHROUGH */
/* It's also OK to issue stalls during callbacks when a non-empty
* DATA stage buffer has been read (or even written).
*/
case MUSB_EP0_STAGE_STATUSIN: /* control-OUT status */
case MUSB_EP0_STAGE_STATUSOUT: /* control-IN status */
csr |= MUSB_CSR0_P_SENDSTALL;
musb_writew(regs, MUSB_CSR0, csr);
musb->ep0_state = MUSB_EP0_STAGE_IDLE;
musb->ackpend = 0;
break;
default:
DBG(1, "ep0 can't halt in state %d\n", musb->ep0_state);
status = -EINVAL;
}
cleanup:
spin_unlock_irqrestore(&musb->lock, flags);
return status;
}
const struct usb_ep_ops musb_g_ep0_ops = {
.enable = musb_g_ep0_enable,
.disable = musb_g_ep0_disable,
.alloc_request = musb_alloc_request,
.free_request = musb_free_request,
.queue = musb_g_ep0_queue,
.dequeue = musb_g_ep0_dequeue,
.set_halt = musb_g_ep0_halt,
};
