/*
* USB BlackBerry charging module
*
* Copyright (C) 2007 Greg Kroah-Hartman <gregkh@suse.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
* Information on how to switch configs was taken by the bcharge.cc file
* created by the barry.sf.net project.
*
* bcharge.cc has the following copyright:
* Copyright (C) 2006, Net Direct Inc. (http://www.netdirect.ca/)
* and is released under the GPLv2.
*
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#define RIM_VENDOR 0x0fca
#define BLACKBERRY 0x0001
#define BLACKBERRY_PEARL_DUAL 0x0004
#define BLACKBERRY_PEARL 0x0006
static int debug;
static int pearl_dual_mode = 1;
#ifdef dbg
#undef dbg
#endif
#define dbg(dev, format, arg...) \
if (debug) \
dev_printk(KERN_DEBUG , dev , format , ## arg)
static struct usb_device_id id_table [] = {
{ USB_DEVICE(RIM_VENDOR, BLACKBERRY) },
{ USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL) },
{ USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL_DUAL) },
{ }, /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
static int magic_charge(struct usb_device *udev)
{
char *dummy_buffer = kzalloc(2, GFP_KERNEL);
int retval;
if (!dummy_buffer)
return -ENOMEM;
/* send two magic commands and then set the configuration. The device
* will then reset itself with the new power usage and should start
* charging. */
/* Note, with testing, it only seems that the first message is really
* needed (at least for the 8700c), but to be safe, we emulate what
* other operating systems seem to be sending to their device. We
* really need to get some specs for this device to be sure about what
* is going on here.
*/
dbg(&udev->dev, "Sending first magic command\n");
retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0xa5, 0xc0, 0, 1, dummy_buffer, 2, 100);
if (retval != 2) {
dev_err(&udev->dev, "First magic command failed: %d.\n",
retval);
return retval;
}
dbg(&udev->dev, "Sending second magic command\n");
retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0xa2, 0x40, 0, 1, dummy_buffer, 0, 100);
if (retval != 0) {
dev_err(&udev->dev, "Second magic command failed: %d.\n",
retval);
return retval;
}
dbg(&udev->dev, "Calling set_configuration\n");
retval = usb_driver_set_configuration(udev, 1);
if (retval)
dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
return retval;
}
static int magic_dual_mode(struct usb_device *udev)
{
char *dummy_buffer = kzalloc(2, GFP_KERNEL);
int retval;
if (!dummy_buffer)
return -ENOMEM;
/* send magic command so that the Blackberry Pearl device exposes
* two interfaces: both the USB mass-storage one and one which can
* be used for database access. */
dbg(&udev->dev, "Sending magic pearl command\n");
retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0xa9, 0xc0, 1, 1, dummy_buffer, 2, 100);
dbg(&udev->dev, "Magic pearl command returned %d\n", retval);
dbg(&udev->dev, "Calling set_configuration\n");
retval = usb_driver_set_configuration(udev, 1);
if (retval)
dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
return retval;
}
static int berry_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
dbg(&udev->dev, "Power is set to %dmA\n",
udev->actconfig->desc.bMaxPower * 2);
/* check the power usage so we don't try to enable something that is
* already enabled */
if ((udev->actconfig->desc.bMaxPower * 2) == 500) {
dbg(&udev->dev, "device is already charging, power is "
"set to %dmA\n", udev->actconfig->desc.bMaxPower * 2);
return -ENODEV;
}
/* turn the power on */
magic_charge(udev);
if ((le16_to_cpu(udev->descriptor.idProduct) == BLACKBERRY_PEARL) &&
(pearl_dual_mode))
magic_dual_mode(udev);
/* we don't really want to bind to the device, userspace programs can
* handle the syncing just fine, so get outta here. */
return -ENODEV;
}
static void berry_disconnect(struct usb_interface *intf)
{
}
static struct usb_driver berry_driver = {
.name = "berry_charge",
.probe = berry_probe,
.disconnect = berry_disconnect,
.id_table = id_table,
};
static int __init berry_init(void)
{
return usb_register(&berry_driver);
}
static void __exit berry_exit(void)
{
usb_deregister(&berry_driver);
}
module_init(berry_init);
module_exit(berry_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
module_param(pearl_dual_mode, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(pearl_dual_mode, "Change Blackberry Pearl to run in dual mode");
