/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
*
* Bus Glue for AMD Alchemy Au1xxx
*
* Written by Christopher Hoover <ch@hpl.hp.com>
* Based on fragments of previous driver by Rusell King et al.
*
* Modified for LH7A404 from ohci-sa1111.c
* by Durgesh Pattamatta <pattamattad@sharpsec.com>
* Modified for AMD Alchemy Au1xxx
* by Matt Porter <mporter@kernel.crashing.org>
*
* This file is licenced under the GPL.
*/
#include <linux/platform_device.h>
#include <linux/signal.h>
#include <asm/mach-au1x00/au1000.h>
#ifndef CONFIG_SOC_AU1200
#define USBH_ENABLE_BE (1<<0)
#define USBH_ENABLE_C (1<<1)
#define USBH_ENABLE_E (1<<2)
#define USBH_ENABLE_CE (1<<3)
#define USBH_ENABLE_RD (1<<4)
#ifdef __LITTLE_ENDIAN
#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
#elif __BIG_ENDIAN
#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | USBH_ENABLE_BE)
#else
#error not byte order defined
#endif
#else /* Au1200 */
#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG)
#define USB_MCFG_PFEN (1<<31)
#define USB_MCFG_RDCOMB (1<<30)
#define USB_MCFG_SSDEN (1<<23)
#define USB_MCFG_OHCCLKEN (1<<16)
#define USB_MCFG_UCAM (1<<7)
#define USB_MCFG_OBMEN (1<<1)
#define USB_MCFG_OMEMEN (1<<0)
#define USBH_ENABLE_CE USB_MCFG_OHCCLKEN
#ifdef CONFIG_DMA_COHERENT
#define USBH_ENABLE_INIT (USB_MCFG_OHCCLKEN \
| USB_MCFG_PFEN | USB_MCFG_RDCOMB \
| USB_MCFG_SSDEN | USB_MCFG_UCAM \
| USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
#else
#define USBH_ENABLE_INIT (USB_MCFG_OHCCLKEN \
| USB_MCFG_PFEN | USB_MCFG_RDCOMB \
| USB_MCFG_SSDEN \
| USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
#endif
#define USBH_DISABLE (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
#endif /* Au1200 */
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
static void au1xxx_start_ohc(struct platform_device *dev)
{
printk(KERN_DEBUG __FILE__
": starting Au1xxx OHCI USB Controller\n");
/* enable host controller */
#ifndef CONFIG_SOC_AU1200
au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
udelay(1000);
au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG);
udelay(1000);
#else /* Au1200 */
/* write HW defaults again in case Yamon cleared them */
if (au_readl(USB_HOST_CONFIG) == 0) {
au_writel(0x00d02000, USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
udelay(1000);
}
au_writel(USBH_ENABLE_CE | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
udelay(1000);
au_writel(USBH_ENABLE_INIT | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
udelay(1000);
#endif /* Au1200 */
#ifndef CONFIG_SOC_AU1200
/* wait for reset complete (read register twice; see au1500 errata) */
while (au_readl(USB_HOST_CONFIG),
!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
#endif
udelay(1000);
printk(KERN_DEBUG __FILE__
": Clock to USB host has been enabled \n");
}
static void au1xxx_stop_ohc(struct platform_device *dev)
{
printk(KERN_DEBUG __FILE__
": stopping Au1xxx OHCI USB Controller\n");
#ifndef CONFIG_SOC_AU1200
/* Disable clock */
au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
#else /* Au1200 */
/* Disable mem */
au_writel(~USBH_DISABLE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
udelay(1000);
/* Disable clock */
au_writel(~USBH_ENABLE_CE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
#endif /* Au1200 */
}
/*-------------------------------------------------------------------------*/
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
/**
* usb_ohci_au1xxx_probe - initialize Au1xxx-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*
*/
static int usb_ohci_au1xxx_probe(const struct hc_driver *driver,
struct platform_device *dev)
{
int retval;
struct usb_hcd *hcd;
#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
/* Au1200 AB USB does not support coherent memory */
if (!(read_c0_prid() & 0xff)) {
pr_info("%s: this is chip revision AB !!\n",
dev->name);
pr_info("%s: update your board or re-configure the kernel\n",
dev->name);
return -ENODEV;
}
#endif
if (dev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug("resource[1] is not IORESOURCE_IRQ\n");
return -ENOMEM;
}
hcd = usb_create_hcd(driver, &dev->dev, "au1xxx");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = dev->resource[0].start;
hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
pr_debug("request_mem_region failed\n");
retval = -EBUSY;
goto err1;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
pr_debug("ioremap failed\n");
retval = -ENOMEM;
goto err2;
}
au1xxx_start_ohc(dev);
ohci_hcd_init(hcd_to_ohci(hcd));
retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED | IRQF_SHARED);
if (retval == 0)
return retval;
au1xxx_stop_ohc(dev);
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
return retval;
}
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
* usb_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_au1xxx_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*
*/
static void usb_ohci_au1xxx_remove(struct usb_hcd *hcd, struct platform_device *dev)
{
usb_remove_hcd(hcd);
au1xxx_stop_ohc(dev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
}
/*-------------------------------------------------------------------------*/
static int __devinit
ohci_au1xxx_start (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
ohci_dbg (ohci, "ohci_au1xxx_start, ohci:%p", ohci);
if ((ret = ohci_init (ohci)) < 0)
return ret;
if ((ret = ohci_run (ohci)) < 0) {
err ("can't start %s", hcd->self.bus_name);
ohci_stop (hcd);
return ret;
}
return 0;
}
/*-------------------------------------------------------------------------*/
static const struct hc_driver ohci_au1xxx_hc_driver = {
.description = hcd_name,
.product_desc = "Au1xxx OHCI",
.hcd_priv_size = sizeof(struct ohci_hcd),
/*
* generic hardware linkage
*/
.irq = ohci_irq,
.flags = HCD_USB11 | HCD_MEMORY,
/*
* basic lifecycle operations
*/
.start = ohci_au1xxx_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ohci_get_frame,
/*
* root hub support
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
.hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
{
int ret;
pr_debug ("In ohci_hcd_au1xxx_drv_probe");
if (usb_disabled())
return -ENODEV;
ret = usb_ohci_au1xxx_probe(&ohci_au1xxx_hc_driver, pdev);
return ret;
}
static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_ohci_au1xxx_remove(hcd, pdev);
return 0;
}
/*TBD*/
/*static int ohci_hcd_au1xxx_drv_suspend(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
return 0;
}
static int ohci_hcd_au1xxx_drv_resume(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
return 0;
}
*/
static struct platform_driver ohci_hcd_au1xxx_driver = {
.probe = ohci_hcd_au1xxx_drv_probe,
.remove = ohci_hcd_au1xxx_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_au1xxx_drv_suspend, */
/*.resume = ohci_hcd_au1xxx_drv_resume, */
.driver = {
.name = "au1xxx-ohci",
.owner = THIS_MODULE,
},
};
