/*
* Freescale STMP37XX/STMP378X Application UART driver
*
* Author: dmitry pervushin <dimka@embeddedalley.com>
*
* Copyright 2008-2010 Freescale Semiconductor, Inc.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
#include <linux/of_device.h>
#include <asm/cacheflush.h>
#define MXS_AUART_PORTS 5
#define AUART_CTRL0 0x00000000
#define AUART_CTRL0_SET 0x00000004
#define AUART_CTRL0_CLR 0x00000008
#define AUART_CTRL0_TOG 0x0000000c
#define AUART_CTRL1 0x00000010
#define AUART_CTRL1_SET 0x00000014
#define AUART_CTRL1_CLR 0x00000018
#define AUART_CTRL1_TOG 0x0000001c
#define AUART_CTRL2 0x00000020
#define AUART_CTRL2_SET 0x00000024
#define AUART_CTRL2_CLR 0x00000028
#define AUART_CTRL2_TOG 0x0000002c
#define AUART_LINECTRL 0x00000030
#define AUART_LINECTRL_SET 0x00000034
#define AUART_LINECTRL_CLR 0x00000038
#define AUART_LINECTRL_TOG 0x0000003c
#define AUART_LINECTRL2 0x00000040
#define AUART_LINECTRL2_SET 0x00000044
#define AUART_LINECTRL2_CLR 0x00000048
#define AUART_LINECTRL2_TOG 0x0000004c
#define AUART_INTR 0x00000050
#define AUART_INTR_SET 0x00000054
#define AUART_INTR_CLR 0x00000058
#define AUART_INTR_TOG 0x0000005c
#define AUART_DATA 0x00000060
#define AUART_STAT 0x00000070
#define AUART_DEBUG 0x00000080
#define AUART_VERSION 0x00000090
#define AUART_AUTOBAUD 0x000000a0
#define AUART_CTRL0_SFTRST (1 << 31)
#define AUART_CTRL0_CLKGATE (1 << 30)
#define AUART_CTRL2_CTSEN (1 << 15)
#define AUART_CTRL2_RTSEN (1 << 14)
#define AUART_CTRL2_RTS (1 << 11)
#define AUART_CTRL2_RXE (1 << 9)
#define AUART_CTRL2_TXE (1 << 8)
#define AUART_CTRL2_UARTEN (1 << 0)
#define AUART_LINECTRL_BAUD_DIVINT_SHIFT 16
#define AUART_LINECTRL_BAUD_DIVINT_MASK 0xffff0000
#define AUART_LINECTRL_BAUD_DIVINT(v) (((v) & 0xffff) << 16)
#define AUART_LINECTRL_BAUD_DIVFRAC_SHIFT 8
#define AUART_LINECTRL_BAUD_DIVFRAC_MASK 0x00003f00
#define AUART_LINECTRL_BAUD_DIVFRAC(v) (((v) & 0x3f) << 8)
#define AUART_LINECTRL_WLEN_MASK 0x00000060
#define AUART_LINECTRL_WLEN(v) (((v) & 0x3) << 5)
#define AUART_LINECTRL_FEN (1 << 4)
#define AUART_LINECTRL_STP2 (1 << 3)
#define AUART_LINECTRL_EPS (1 << 2)
#define AUART_LINECTRL_PEN (1 << 1)
#define AUART_LINECTRL_BRK (1 << 0)
#define AUART_INTR_RTIEN (1 << 22)
#define AUART_INTR_TXIEN (1 << 21)
#define AUART_INTR_RXIEN (1 << 20)
#define AUART_INTR_CTSMIEN (1 << 17)
#define AUART_INTR_RTIS (1 << 6)
#define AUART_INTR_TXIS (1 << 5)
#define AUART_INTR_RXIS (1 << 4)
#define AUART_INTR_CTSMIS (1 << 1)
#define AUART_STAT_BUSY (1 << 29)
#define AUART_STAT_CTS (1 << 28)
#define AUART_STAT_TXFE (1 << 27)
#define AUART_STAT_TXFF (1 << 25)
#define AUART_STAT_RXFE (1 << 24)
#define AUART_STAT_OERR (1 << 19)
#define AUART_STAT_BERR (1 << 18)
#define AUART_STAT_PERR (1 << 17)
#define AUART_STAT_FERR (1 << 16)
static struct uart_driver auart_driver;
struct mxs_auart_port {
struct uart_port port;
unsigned int flags;
unsigned int ctrl;
unsigned int irq;
struct clk *clk;
struct device *dev;
};
static void mxs_auart_stop_tx(struct uart_port *u);
#define to_auart_port(u) container_of(u, struct mxs_auart_port, port)
static inline void mxs_auart_tx_chars(struct mxs_auart_port *s)
{
struct circ_buf *xmit = &s->port.state->xmit;
while (!(readl(s->port.membase + AUART_STAT) &
AUART_STAT_TXFF)) {
if (s->port.x_char) {
s->port.icount.tx++;
writel(s->port.x_char,
s->port.membase + AUART_DATA);
s->port.x_char = 0;
continue;
}
if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
s->port.icount.tx++;
writel(xmit->buf[xmit->tail],
s->port.membase + AUART_DATA);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
} else
break;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&s->port);
if (uart_circ_empty(&(s->port.state->xmit)))
writel(AUART_INTR_TXIEN,
s->port.membase + AUART_INTR_CLR);
else
writel(AUART_INTR_TXIEN,
s->port.membase + AUART_INTR_SET);
if (uart_tx_stopped(&s->port))
mxs_auart_stop_tx(&s->port);
}
static void mxs_auart_rx_char(struct mxs_auart_port *s)
{
int flag;
u32 stat;
u8 c;
c = readl(s->port.membase + AUART_DATA);
stat = readl(s->port.membase + AUART_STAT);
flag = TTY_NORMAL;
s->port.icount.rx++;
if (stat & AUART_STAT_BERR) {
s->port.icount.brk++;
if (uart_handle_break(&s->port))
goto out;
} else if (stat & AUART_STAT_PERR) {
s->port.icount.parity++;
} else if (stat & AUART_STAT_FERR) {
s->port.icount.frame++;
}
/*
* Mask off conditions which should be ingored.
*/
stat &= s->port.read_status_mask;
if (stat & AUART_STAT_BERR) {
flag = TTY_BREAK;
} else if (stat & AUART_STAT_PERR)
flag = TTY_PARITY;
else if (stat & AUART_STAT_FERR)
flag = TTY_FRAME;
if (stat & AUART_STAT_OERR)
s->port.icount.overrun++;
if (uart_handle_sysrq_char(&s->port, c))
goto out;
uart_insert_char(&s->port, stat, AUART_STAT_OERR, c, flag);
out:
writel(stat, s->port.membase + AUART_STAT);
}
static void mxs_auart_rx_chars(struct mxs_auart_port *s)
{
struct tty_struct *tty = s->port.state->port.tty;
u32 stat = 0;
for (;;) {
stat = readl(s->port.membase + AUART_STAT);
if (stat & AUART_STAT_RXFE)
break;
mxs_auart_rx_char(s);
}
writel(stat, s->port.membase + AUART_STAT);
tty_flip_buffer_push(tty);
}
static int mxs_auart_request_port(struct uart_port *u)
{
return 0;
}
static int mxs_auart_verify_port(struct uart_port *u,
struct serial_struct *ser)
{
if (u->type != PORT_UNKNOWN && u->type != PORT_IMX)
return -EINVAL;
return 0;
}
static void mxs_auart_config_port(struct uart_port *u, int flags)
{
}
static const char *mxs_auart_type(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
return dev_name(s->dev);
}
static void mxs_auart_release_port(struct uart_port *u)
{
}
static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
{
struct mxs_auart_port *s = to_auart_port(u);
u32 ctrl = readl(u->membase + AUART_CTRL2);
ctrl &= ~AUART_CTRL2_RTSEN;
if (mctrl & TIOCM_RTS) {
if (tty_port_cts_enabled(&u->state->port))
ctrl |= AUART_CTRL2_RTSEN;
}
s->ctrl = mctrl;
writel(ctrl, u->membase + AUART_CTRL2);
}
static u32 mxs_auart_get_mctrl(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
u32 stat = readl(u->membase + AUART_STAT);
int ctrl2 = readl(u->membase + AUART_CTRL2);
u32 mctrl = s->ctrl;
mctrl &= ~TIOCM_CTS;
if (stat & AUART_STAT_CTS)
mctrl |= TIOCM_CTS;
if (ctrl2 & AUART_CTRL2_RTS)
mctrl |= TIOCM_RTS;
return mctrl;
}
static void mxs_auart_settermios(struct uart_port *u,
struct ktermios *termios,
struct ktermios *old)
{
u32 bm, ctrl, ctrl2, div;
unsigned int cflag, baud;
cflag = termios->c_cflag;
ctrl = AUART_LINECTRL_FEN;
ctrl2 = readl(u->membase + AUART_CTRL2);
/* byte size */
switch (cflag & CSIZE) {
case CS5:
bm = 0;
break;
case CS6:
bm = 1;
break;
case CS7:
bm = 2;
break;
case CS8:
bm = 3;
break;
default:
return;
}
ctrl |= AUART_LINECTRL_WLEN(bm);
/* parity */
if (cflag & PARENB) {
ctrl |= AUART_LINECTRL_PEN;
if ((cflag & PARODD) == 0)
ctrl |= AUART_LINECTRL_EPS;
}
u->read_status_mask = 0;
if (termios->c_iflag & INPCK)
u->read_status_mask |= AUART_STAT_PERR;
if (termios->c_iflag & (BRKINT | PARMRK))
u->read_status_mask |= AUART_STAT_BERR;
/*
* Characters to ignore
*/
u->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
u->ignore_status_mask |= AUART_STAT_PERR;
if (termios->c_iflag & IGNBRK) {
u->ignore_status_mask |= AUART_STAT_BERR;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
u->ignore_status_mask |= AUART_STAT_OERR;
}
/*
* ignore all characters if CREAD is not set
*/
if (cflag & CREAD)
ctrl2 |= AUART_CTRL2_RXE;
else
ctrl2 &= ~AUART_CTRL2_RXE;
/* figure out the stop bits requested */
if (cflag & CSTOPB)
ctrl |= AUART_LINECTRL_STP2;
/* figure out the hardware flow control settings */
if (cflag & CRTSCTS)
ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN;
else
ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN);
/* set baud rate */
baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk);
div = u->uartclk * 32 / baud;
ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F);
ctrl |= AUART_LINECTRL_BAUD_DIVINT(div >> 6);
writel(ctrl, u->membase + AUART_LINECTRL);
writel(ctrl2, u->membase + AUART_CTRL2);
uart_update_timeout(u, termios->c_cflag, baud);
}
static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
{
u32 istatus, istat;
struct mxs_auart_port *s = context;
u32 stat = readl(s->port.membase + AUART_STAT);
istatus = istat = readl(s->port.membase + AUART_INTR);
if (istat & AUART_INTR_CTSMIS) {
uart_handle_cts_change(&s->port, stat & AUART_STAT_CTS);
writel(AUART_INTR_CTSMIS,
s->port.membase + AUART_INTR_CLR);
istat &= ~AUART_INTR_CTSMIS;
}
if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) {
mxs_auart_rx_chars(s);
istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS);
}
if (istat & AUART_INTR_TXIS) {
mxs_auart_tx_chars(s);
istat &= ~AUART_INTR_TXIS;
}
writel(istatus & (AUART_INTR_RTIS
| AUART_INTR_TXIS
| AUART_INTR_RXIS
| AUART_INTR_CTSMIS),
s->port.membase + AUART_INTR_CLR);
return IRQ_HANDLED;
}
static void mxs_auart_reset(struct uart_port *u)
{
int i;
unsigned int reg;
writel(AUART_CTRL0_SFTRST, u->membase + AUART_CTRL0_CLR);
for (i = 0; i < 10000; i++) {
reg = readl(u->membase + AUART_CTRL0);
if (!(reg & AUART_CTRL0_SFTRST))
break;
udelay(3);
}
writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
}
static int mxs_auart_startup(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
clk_prepare_enable(s->clk);
writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_SET);
writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
u->membase + AUART_INTR);
/*
* Enable fifo so all four bytes of a DMA word are written to
* output (otherwise, only the LSB is written, ie. 1 in 4 bytes)
*/
writel(AUART_LINECTRL_FEN, u->membase + AUART_LINECTRL_SET);
return 0;
}
static void mxs_auart_shutdown(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
u->membase + AUART_INTR_CLR);
writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
clk_disable_unprepare(s->clk);
}
static unsigned int mxs_auart_tx_empty(struct uart_port *u)
{
if (readl(u->membase + AUART_STAT) & AUART_STAT_TXFE)
return TIOCSER_TEMT;
else
return 0;
}
static void mxs_auart_start_tx(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
/* enable transmitter */
writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_SET);
mxs_auart_tx_chars(s);
}
static void mxs_auart_stop_tx(struct uart_port *u)
{
writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_CLR);
}
static void mxs_auart_stop_rx(struct uart_port *u)
{
writel(AUART_CTRL2_RXE, u->membase + AUART_CTRL2_CLR);
}
static void mxs_auart_break_ctl(struct uart_port *u, int ctl)
{
if (ctl)
writel(AUART_LINECTRL_BRK,
u->membase + AUART_LINECTRL_SET);
else
writel(AUART_LINECTRL_BRK,
u->membase + AUART_LINECTRL_CLR);
}
static void mxs_auart_enable_ms(struct uart_port *port)
{
/* just empty */
}
static struct uart_ops mxs_auart_ops = {
.tx_empty = mxs_auart_tx_empty,
.start_tx = mxs_auart_start_tx,
.stop_tx = mxs_auart_stop_tx,
.stop_rx = mxs_auart_stop_rx,
.enable_ms = mxs_auart_enable_ms,
.break_ctl = mxs_auart_break_ctl,
.set_mctrl = mxs_auart_set_mctrl,
.get_mctrl = mxs_auart_get_mctrl,
.startup = mxs_auart_startup,
.shutdown = mxs_auart_shutdown,
.set_termios = mxs_auart_settermios,
.type = mxs_auart_type,
.release_port = mxs_auart_release_port,
.request_port = mxs_auart_request_port,
.config_port = mxs_auart_config_port,
.verify_port = mxs_auart_verify_port,
};
static struct mxs_auart_port *auart_port[MXS_AUART_PORTS];
#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
static void mxs_auart_console_putchar(struct uart_port *port, int ch)
{
unsigned int to = 1000;
while (readl(port->membase + AUART_STAT) & AUART_STAT_TXFF) {
if (!to--)
break;
udelay(1);
}
writel(ch, port->membase + AUART_DATA);
}
static void
auart_console_write(struct console *co, const char *str, unsigned int count)
{
struct mxs_auart_port *s;
struct uart_port *port;
unsigned int old_ctrl0, old_ctrl2;
unsigned int to = 1000;
if (co->index > MXS_AUART_PORTS || co->index < 0)
return;
s = auart_port[co->index];
port = &s->port;
clk_enable(s->clk);
/* First save the CR then disable the interrupts */
old_ctrl2 = readl(port->membase + AUART_CTRL2);
old_ctrl0 = readl(port->membase + AUART_CTRL0);
writel(AUART_CTRL0_CLKGATE,
port->membase + AUART_CTRL0_CLR);
writel(AUART_CTRL2_UARTEN | AUART_CTRL2_TXE,
port->membase + AUART_CTRL2_SET);
uart_console_write(port, str, count, mxs_auart_console_putchar);
/*
* Finally, wait for transmitter to become empty
* and restore the TCR
*/
while (readl(port->membase + AUART_STAT) & AUART_STAT_BUSY) {
if (!to--)
break;
udelay(1);
}
writel(old_ctrl0, port->membase + AUART_CTRL0);
writel(old_ctrl2, port->membase + AUART_CTRL2);
clk_disable(s->clk);
}
static void __init
auart_console_get_options(struct uart_port *port, int *baud,
int *parity, int *bits)
{
unsigned int lcr_h, quot;
if (!(readl(port->membase + AUART_CTRL2) & AUART_CTRL2_UARTEN))
return;
lcr_h = readl(port->membase + AUART_LINECTRL);
*parity = 'n';
if (lcr_h & AUART_LINECTRL_PEN) {
if (lcr_h & AUART_LINECTRL_EPS)
*parity = 'e';
else
*parity = 'o';
}
if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2))
*bits = 7;
else
*bits = 8;
quot = ((readl(port->membase + AUART_LINECTRL)
& AUART_LINECTRL_BAUD_DIVINT_MASK))
>> (AUART_LINECTRL_BAUD_DIVINT_SHIFT - 6);
quot |= ((readl(port->membase + AUART_LINECTRL)
& AUART_LINECTRL_BAUD_DIVFRAC_MASK))
>> AUART_LINECTRL_BAUD_DIVFRAC_SHIFT;
if (quot == 0)
quot = 1;
*baud = (port->uartclk << 2) / quot;
}
static int __init
auart_console_setup(struct console *co, char *options)
{
struct mxs_auart_port *s;
int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
int ret;
/*
* Check whether an invalid uart number has been specified, and
* if so, search for the first available port that does have
* console support.
*/
if (co->index == -1 || co->index >= ARRAY_SIZE(auart_port))
co->index = 0;
s = auart_port[co->index];
if (!s)
return -ENODEV;
clk_prepare_enable(s->clk);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
auart_console_get_options(&s->port, &baud, &parity, &bits);
ret = uart_set_options(&s->port, co, baud, parity, bits, flow);
clk_disable_unprepare(s->clk);
return ret;
}
static struct console auart_console = {
.name = "ttyAPP",
.write = auart_console_write,
.device = uart_console_device,
.setup = auart_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &auart_driver,
};
#endif
static struct uart_driver auart_driver = {
.owner = THIS_MODULE,
.driver_name = "ttyAPP",
.dev_name = "ttyAPP",
.major = 0,
.minor = 0,
.nr = MXS_AUART_PORTS,
#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
.cons = &auart_console,
#endif
};
/*
* This function returns 1 if pdev isn't a device instatiated by dt, 0 if it
* could successfully get all information from dt or a negative errno.
*/
static int serial_mxs_probe_dt(struct mxs_auart_port *s,
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
int ret;
if (!np)
/* no device tree device */
return 1;
ret = of_alias_get_id(np, "serial");
if (ret < 0) {
dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
return ret;
}
s->port.line = ret;
return 0;
}
static int __devinit mxs_auart_probe(struct platform_device *pdev)
{
struct mxs_auart_port *s;
u32 version;
int ret = 0;
struct resource *r;
struct pinctrl *pinctrl;
s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL);
if (!s) {
ret = -ENOMEM;
goto out;
}
ret = serial_mxs_probe_dt(s, pdev);
if (ret > 0)
s->port.line = pdev->id < 0 ? 0 : pdev->id;
else if (ret < 0)
goto out_free;
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
goto out_free;
}
s->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(s->clk)) {
ret = PTR_ERR(s->clk);
goto out_free;
}
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
ret = -ENXIO;
goto out_free_clk;
}
s->port.mapbase = r->start;
s->port.membase = ioremap(r->start, resource_size(r));
s->port.ops = &mxs_auart_ops;
s->port.iotype = UPIO_MEM;
s->port.fifosize = 16;
s->port.uartclk = clk_get_rate(s->clk);
s->port.type = PORT_IMX;
s->port.dev = s->dev = get_device(&pdev->dev);
s->flags = 0;
s->ctrl = 0;
s->irq = platform_get_irq(pdev, 0);
s->port.irq = s->irq;
ret = request_irq(s->irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s);
if (ret)
goto out_free_clk;
platform_set_drvdata(pdev, s);
auart_port[s->port.line] = s;
mxs_auart_reset(&s->port);
ret = uart_add_one_port(&auart_driver, &s->port);
if (ret)
goto out_free_irq;
version = readl(s->port.membase + AUART_VERSION);
dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n",
(version >> 24) & 0xff,
(version >> 16) & 0xff, version & 0xffff);
return 0;
out_free_irq:
auart_port[pdev->id] = NULL;
free_irq(s->irq, s);
out_free_clk:
put_device(s->dev);
clk_put(s->clk);
out_free:
kfree(s);
out:
return ret;
}
static int __devexit mxs_auart_remove(struct platform_device *pdev)
{
struct mxs_auart_port *s = platform_get_drvdata(pdev);
uart_remove_one_port(&auart_driver, &s->port);
auart_port[pdev->id] = NULL;
put_device(s->dev);
clk_put(s->clk);
free_irq(s->irq, s);
kfree(s);
return 0;
}
static struct of_device_id mxs_auart_dt_ids[] = {
{ .compatible = "fsl,imx23-auart", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
static struct platform_driver mxs_auart_driver = {
.probe = mxs_auart_probe,
.remove = __devexit_p(mxs_auart_remove),
.driver = {
.name = "mxs-auart",
.owner = THIS_MODULE,
.of_match_table = mxs_auart_dt_ids,
},
};
static int __init mxs_auart_init(void)
{
int r;
r = uart_register_driver(&auart_driver);
if (r)
goto out;
r = platform_driver_register(&mxs_auart_driver);
if (r)
goto out_err;
return 0;
out_err:
uart_unregister_driver(&auart_driver);
out:
return r;
}
static void __exit mxs_auart_exit(void)
{
platform_driver_unregister(&mxs_auart_driver);
uart_unregister_driver(&auart_driver);
}
module_init(mxs_auart_init);
module_exit(mxs_auart_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Freescale MXS application uart driver");
MODULE_ALIAS("platform:mxs-auart");