/*
* Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
* All rights reserved
* www.brocade.com
*
* Linux driver for Brocade Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
* published by the Free Software Foundation
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include <bfa.h>
#include <defs/bfa_defs_pci.h>
#include <cs/bfa_debug.h>
#include <bfa_iocfc.h>
#define DEF_CFG_NUM_FABRICS 1
#define DEF_CFG_NUM_LPORTS 256
#define DEF_CFG_NUM_CQS 4
#define DEF_CFG_NUM_IOIM_REQS (BFA_IOIM_MAX)
#define DEF_CFG_NUM_TSKIM_REQS 128
#define DEF_CFG_NUM_FCXP_REQS 64
#define DEF_CFG_NUM_UF_BUFS 64
#define DEF_CFG_NUM_RPORTS 1024
#define DEF_CFG_NUM_ITNIMS (DEF_CFG_NUM_RPORTS)
#define DEF_CFG_NUM_TINS 256
#define DEF_CFG_NUM_SGPGS 2048
#define DEF_CFG_NUM_REQQ_ELEMS 256
#define DEF_CFG_NUM_RSPQ_ELEMS 64
#define DEF_CFG_NUM_SBOOT_TGTS 16
#define DEF_CFG_NUM_SBOOT_LUNS 16
/**
* Use this function query the memory requirement of the BFA library.
* This function needs to be called before bfa_attach() to get the
* memory required of the BFA layer for a given driver configuration.
*
* This call will fail, if the cap is out of range compared to pre-defined
* values within the BFA library
*
* @param[in] cfg - pointer to bfa_ioc_cfg_t. Driver layer should indicate
* its configuration in this structure.
* The default values for struct bfa_iocfc_cfg_s can be
* fetched using bfa_cfg_get_default() API.
*
* If cap's boundary check fails, the library will use
* the default bfa_cap_t values (and log a warning msg).
*
* @param[out] meminfo - pointer to bfa_meminfo_t. This content
* indicates the memory type (see bfa_mem_type_t) and
* amount of memory required.
*
* Driver should allocate the memory, populate the
* starting address for each block and provide the same
* structure as input parameter to bfa_attach() call.
*
* @return void
*
* Special Considerations: @note
*/
void
bfa_cfg_get_meminfo(struct bfa_iocfc_cfg_s *cfg, struct bfa_meminfo_s *meminfo)
{
int i;
u32 km_len = 0, dm_len = 0;
bfa_assert((cfg != NULL) && (meminfo != NULL));
bfa_os_memset((void *)meminfo, 0, sizeof(struct bfa_meminfo_s));
meminfo->meminfo[BFA_MEM_TYPE_KVA - 1].mem_type =
BFA_MEM_TYPE_KVA;
meminfo->meminfo[BFA_MEM_TYPE_DMA - 1].mem_type =
BFA_MEM_TYPE_DMA;
bfa_iocfc_meminfo(cfg, &km_len, &dm_len);
for (i = 0; hal_mods[i]; i++)
hal_mods[i]->meminfo(cfg, &km_len, &dm_len);
dm_len += bfa_port_meminfo();
meminfo->meminfo[BFA_MEM_TYPE_KVA - 1].mem_len = km_len;
meminfo->meminfo[BFA_MEM_TYPE_DMA - 1].mem_len = dm_len;
}
static void
bfa_com_port_attach(struct bfa_s *bfa, struct bfa_meminfo_s *mi)
{
struct bfa_port_s *port = &bfa->modules.port;
uint32_t dm_len;
uint8_t *dm_kva;
uint64_t dm_pa;
dm_len = bfa_port_meminfo();
dm_kva = bfa_meminfo_dma_virt(mi);
dm_pa = bfa_meminfo_dma_phys(mi);
memset(port, 0, sizeof(struct bfa_port_s));
bfa_port_attach(port, &bfa->ioc, bfa, bfa->trcmod, bfa->logm);
bfa_port_mem_claim(port, dm_kva, dm_pa);
bfa_meminfo_dma_virt(mi) = dm_kva + dm_len;
bfa_meminfo_dma_phys(mi) = dm_pa + dm_len;
}
/**
* Use this function to do attach the driver instance with the BFA
* library. This function will not trigger any HW initialization
* process (which will be done in bfa_init() call)
*
* This call will fail, if the cap is out of range compared to
* pre-defined values within the BFA library
*
* @param[out] bfa Pointer to bfa_t.
* @param[in] bfad Opaque handle back to the driver's IOC structure
* @param[in] cfg Pointer to bfa_ioc_cfg_t. Should be same structure
* that was used in bfa_cfg_get_meminfo().
* @param[in] meminfo Pointer to bfa_meminfo_t. The driver should
* use the bfa_cfg_get_meminfo() call to
* find the memory blocks required, allocate the
* required memory and provide the starting addresses.
* @param[in] pcidev pointer to struct bfa_pcidev_s
*
* @return
* void
*
* Special Considerations:
*
* @note
*
*/
void
bfa_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
{
int i;
struct bfa_mem_elem_s *melem;
bfa->fcs = BFA_FALSE;
bfa_assert((cfg != NULL) && (meminfo != NULL));
/**
* initialize all memory pointers for iterative allocation
*/
for (i = 0; i < BFA_MEM_TYPE_MAX; i++) {
melem = meminfo->meminfo + i;
melem->kva_curp = melem->kva;
melem->dma_curp = melem->dma;
}
bfa_iocfc_attach(bfa, bfad, cfg, meminfo, pcidev);
for (i = 0; hal_mods[i]; i++)
hal_mods[i]->attach(bfa, bfad, cfg, meminfo, pcidev);
bfa_com_port_attach(bfa, meminfo);
}
/**
* Use this function to delete a BFA IOC. IOC should be stopped (by
* calling bfa_stop()) before this function call.
*
* @param[in] bfa - pointer to bfa_t.
*
* @return
* void
*
* Special Considerations:
*
* @note
*/
void
bfa_detach(struct bfa_s *bfa)
{
int i;
for (i = 0; hal_mods[i]; i++)
hal_mods[i]->detach(bfa);
bfa_iocfc_detach(bfa);
}
void
bfa_init_trc(struct bfa_s *bfa, struct bfa_trc_mod_s *trcmod)
{
bfa->trcmod = trcmod;
}
void
bfa_init_log(struct bfa_s *bfa, struct bfa_log_mod_s *logmod)
{
bfa->logm = logmod;
}
void
bfa_init_aen(struct bfa_s *bfa, struct bfa_aen_s *aen)
{
bfa->aen = aen;
}
void
bfa_init_plog(struct bfa_s *bfa, struct bfa_plog_s *plog)
{
bfa->plog = plog;
}
/**
* Initialize IOC.
*
* This function will return immediately, when the IOC initialization is
* completed, the bfa_cb_init() will be called.
*
* @param[in] bfa instance
*
* @return void
*
* Special Considerations:
*
* @note
* When this function returns, the driver should register the interrupt service
* routine(s) and enable the device interrupts. If this is not done,
* bfa_cb_init() will never get called
*/
void
bfa_init(struct bfa_s *bfa)
{
bfa_iocfc_init(bfa);
}
/**
* Use this function initiate the IOC configuration setup. This function
* will return immediately.
*
* @param[in] bfa instance
*
* @return None
*/
void
bfa_start(struct bfa_s *bfa)
{
bfa_iocfc_start(bfa);
}
/**
* Use this function quiese the IOC. This function will return immediately,
* when the IOC is actually stopped, the bfa_cb_stop() will be called.
*
* @param[in] bfa - pointer to bfa_t.
*
* @return None
*
* Special Considerations:
* bfa_cb_stop() could be called before or after bfa_stop() returns.
*
* @note
* In case of any failure, we could handle it automatically by doing a
* reset and then succeed the bfa_stop() call.
*/
void
bfa_stop(struct bfa_s *bfa)
{
bfa_iocfc_stop(bfa);
}
void
bfa_comp_deq(struct bfa_s *bfa, struct list_head *comp_q)
{
INIT_LIST_HEAD(comp_q);
list_splice_tail_init(&bfa->comp_q, comp_q);
}
void
bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q)
{
struct list_head *qe;
struct list_head *qen;
struct bfa_cb_qe_s *hcb_qe;
list_for_each_safe(qe, qen, comp_q) {
hcb_qe = (struct bfa_cb_qe_s *) qe;
hcb_qe->cbfn(hcb_qe->cbarg, BFA_TRUE);
}
}
void
bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q)
{
struct list_head *qe;
struct bfa_cb_qe_s *hcb_qe;
while (!list_empty(comp_q)) {
bfa_q_deq(comp_q, &qe);
hcb_qe = (struct bfa_cb_qe_s *) qe;
hcb_qe->cbfn(hcb_qe->cbarg, BFA_FALSE);
}
}
void
bfa_attach_fcs(struct bfa_s *bfa)
{
bfa->fcs = BFA_TRUE;
}
/**
* Periodic timer heart beat from driver
*/
void
bfa_timer_tick(struct bfa_s *bfa)
{
bfa_timer_beat(&bfa->timer_mod);
}
#ifndef BFA_BIOS_BUILD
/**
* Return the list of PCI vendor/device id lists supported by this
* BFA instance.
*/
void
bfa_get_pciids(struct bfa_pciid_s **pciids, int *npciids)
{
static struct bfa_pciid_s __pciids[] = {
{BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_FC_8G2P},
{BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_FC_8G1P},
{BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_CT},
};
*npciids = sizeof(__pciids) / sizeof(__pciids[0]);
*pciids = __pciids;
}
/**
* Use this function query the default struct bfa_iocfc_cfg_s value (compiled
* into BFA layer). The OS driver can then turn back and overwrite entries that
* have been configured by the user.
*
* @param[in] cfg - pointer to bfa_ioc_cfg_t
*
* @return
* void
*
* Special Considerations:
* note
*/
void
bfa_cfg_get_default(struct bfa_iocfc_cfg_s *cfg)
{
cfg->fwcfg.num_fabrics = DEF_CFG_NUM_FABRICS;
cfg->fwcfg.num_lports = DEF_CFG_NUM_LPORTS;
cfg->fwcfg.num_rports = DEF_CFG_NUM_RPORTS;
cfg->fwcfg.num_ioim_reqs = DEF_CFG_NUM_IOIM_REQS;
cfg->fwcfg.num_tskim_reqs = DEF_CFG_NUM_TSKIM_REQS;
cfg->fwcfg.num_fcxp_reqs = DEF_CFG_NUM_FCXP_REQS;
cfg->fwcfg.num_uf_bufs = DEF_CFG_NUM_UF_BUFS;
cfg->fwcfg.num_cqs = DEF_CFG_NUM_CQS;
cfg->drvcfg.num_reqq_elems = DEF_CFG_NUM_REQQ_ELEMS;
cfg->drvcfg.num_rspq_elems = DEF_CFG_NUM_RSPQ_ELEMS;
cfg->drvcfg.num_sgpgs = DEF_CFG_NUM_SGPGS;
cfg->drvcfg.num_sboot_tgts = DEF_CFG_NUM_SBOOT_TGTS;
cfg->drvcfg.num_sboot_luns = DEF_CFG_NUM_SBOOT_LUNS;
cfg->drvcfg.path_tov = BFA_FCPIM_PATHTOV_DEF;
cfg->drvcfg.ioc_recover = BFA_FALSE;
cfg->drvcfg.delay_comp = BFA_FALSE;
}
void
bfa_cfg_get_min(struct bfa_iocfc_cfg_s *cfg)
{
bfa_cfg_get_default(cfg);
cfg->fwcfg.num_ioim_reqs = BFA_IOIM_MIN;
cfg->fwcfg.num_tskim_reqs = BFA_TSKIM_MIN;
cfg->fwcfg.num_fcxp_reqs = BFA_FCXP_MIN;
cfg->fwcfg.num_uf_bufs = BFA_UF_MIN;
cfg->fwcfg.num_rports = BFA_RPORT_MIN;
cfg->drvcfg.num_sgpgs = BFA_SGPG_MIN;
cfg->drvcfg.num_reqq_elems = BFA_REQQ_NELEMS_MIN;
cfg->drvcfg.num_rspq_elems = BFA_RSPQ_NELEMS_MIN;
cfg->drvcfg.min_cfg = BFA_TRUE;
}
void
bfa_get_attr(struct bfa_s *bfa, struct bfa_ioc_attr_s *ioc_attr)
{
bfa_ioc_get_attr(&bfa->ioc, ioc_attr);
}
/**
* Retrieve firmware trace information on IOC failure.
*/
bfa_status_t
bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen)
{
return bfa_ioc_debug_fwsave(&bfa->ioc, trcdata, trclen);
}
/**
* Clear the saved firmware trace information of an IOC.
*/
void
bfa_debug_fwsave_clear(struct bfa_s *bfa)
{
bfa_ioc_debug_fwsave_clear(&bfa->ioc);
}
/**
* Fetch firmware trace data.
*
* @param[in] bfa BFA instance
* @param[out] trcdata Firmware trace buffer
* @param[in,out] trclen Firmware trace buffer len
*
* @retval BFA_STATUS_OK Firmware trace is fetched.
* @retval BFA_STATUS_INPROGRESS Firmware trace fetch is in progress.
*/
bfa_status_t
bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen)
{
return bfa_ioc_debug_fwtrc(&bfa->ioc, trcdata, trclen);
}
/**
* Reset hw semaphore & usage cnt regs and initialize.
*/
void
bfa_chip_reset(struct bfa_s *bfa)
{
bfa_ioc_ownership_reset(&bfa->ioc);
bfa_ioc_pll_init(&bfa->ioc);
}
#endif
