/*
* drivers/s390/cio/device_id.c
*
* Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
* Author(s): Cornelia Huck(cohuck@de.ibm.com)
* Martin Schwidefsky (schwidefsky@de.ibm.com)
*
* Sense ID functions.
*/
#include <linux/module.h>
#include <linux/config.h>
#include <linux/init.h>
#include <asm/ccwdev.h>
#include <asm/delay.h>
#include <asm/cio.h>
#include <asm/lowcore.h>
#include "cio.h"
#include "cio_debug.h"
#include "css.h"
#include "device.h"
#include "ioasm.h"
/*
* diag210 is used under VM to get information about a virtual device
*/
#ifdef CONFIG_ARCH_S390X
int
diag210(struct diag210 * addr)
{
/*
* diag 210 needs its data below the 2GB border, so we
* use a static data area to be sure
*/
static struct diag210 diag210_tmp;
static DEFINE_SPINLOCK(diag210_lock);
unsigned long flags;
int ccode;
spin_lock_irqsave(&diag210_lock, flags);
diag210_tmp = *addr;
asm volatile (
" lhi %0,-1\n"
" sam31\n"
" diag %1,0,0x210\n"
"0: ipm %0\n"
" srl %0,28\n"
"1: sam64\n"
".section __ex_table,\"a\"\n"
" .align 8\n"
" .quad 0b,1b\n"
".previous"
: "=&d" (ccode) : "a" (__pa(&diag210_tmp)) : "cc", "memory" );
*addr = diag210_tmp;
spin_unlock_irqrestore(&diag210_lock, flags);
return ccode;
}
#else
int
diag210(struct diag210 * addr)
{
int ccode;
asm volatile (
" lhi %0,-1\n"
" diag %1,0,0x210\n"
"0: ipm %0\n"
" srl %0,28\n"
"1:\n"
".section __ex_table,\"a\"\n"
" .align 4\n"
" .long 0b,1b\n"
".previous"
: "=&d" (ccode) : "a" (__pa(addr)) : "cc", "memory" );
return ccode;
}
#endif
/*
* Input :
* devno - device number
* ps - pointer to sense ID data area
* Output : none
*/
static void
VM_virtual_device_info (__u16 devno, struct senseid *ps)
{
static struct {
int vrdcvcla, vrdcvtyp, cu_type;
} vm_devices[] = {
{ 0x08, 0x01, 0x3480 },
{ 0x08, 0x02, 0x3430 },
{ 0x08, 0x10, 0x3420 },
{ 0x08, 0x42, 0x3424 },
{ 0x08, 0x44, 0x9348 },
{ 0x08, 0x81, 0x3490 },
{ 0x08, 0x82, 0x3422 },
{ 0x10, 0x41, 0x1403 },
{ 0x10, 0x42, 0x3211 },
{ 0x10, 0x43, 0x3203 },
{ 0x10, 0x45, 0x3800 },
{ 0x10, 0x47, 0x3262 },
{ 0x10, 0x48, 0x3820 },
{ 0x10, 0x49, 0x3800 },
{ 0x10, 0x4a, 0x4245 },
{ 0x10, 0x4b, 0x4248 },
{ 0x10, 0x4d, 0x3800 },
{ 0x10, 0x4e, 0x3820 },
{ 0x10, 0x4f, 0x3820 },
{ 0x10, 0x82, 0x2540 },
{ 0x10, 0x84, 0x3525 },
{ 0x20, 0x81, 0x2501 },
{ 0x20, 0x82, 0x2540 },
{ 0x20, 0x84, 0x3505 },
{ 0x40, 0x01, 0x3278 },
{ 0x40, 0x04, 0x3277 },
{ 0x40, 0x80, 0x2250 },
{ 0x40, 0xc0, 0x5080 },
{ 0x80, 0x00, 0x3215 },
};
struct diag210 diag_data;
int ccode, i;
CIO_TRACE_EVENT (4, "VMvdinf");
diag_data = (struct diag210) {
.vrdcdvno = devno,
.vrdclen = sizeof (diag_data),
};
ccode = diag210 (&diag_data);
ps->reserved = 0xff;
/* Special case for bloody osa devices. */
if (diag_data.vrdcvcla == 0x02 &&
diag_data.vrdcvtyp == 0x20) {
ps->cu_type = 0x3088;
ps->cu_model = 0x60;
return;
}
for (i = 0; i < sizeof(vm_devices) / sizeof(vm_devices[0]); i++)
if (diag_data.vrdcvcla == vm_devices[i].vrdcvcla &&
diag_data.vrdcvtyp == vm_devices[i].vrdcvtyp) {
ps->cu_type = vm_devices[i].cu_type;
return;
}
CIO_MSG_EVENT(0, "DIAG X'210' for device %04X returned (cc = %d):"
"vdev class : %02X, vdev type : %04X \n ... "
"rdev class : %02X, rdev type : %04X, "
"rdev model: %02X\n",
devno, ccode,
diag_data.vrdcvcla, diag_data.vrdcvtyp,
diag_data.vrdcrccl, diag_data.vrdccrty,
diag_data.vrdccrmd);
}
/*
* Start Sense ID helper function.
* Try to obtain the 'control unit'/'device type' information
* associated with the subchannel.
*/
static int
__ccw_device_sense_id_start(struct ccw_device *cdev)
{
struct subchannel *sch;
struct ccw1 *ccw;
int ret;
sch = to_subchannel(cdev->dev.parent);
/* Setup sense channel program. */
ccw = cdev->private->iccws;
if (sch->schib.pmcw.pim != 0x80) {
/* more than one path installed. */
ccw->cmd_code = CCW_CMD_SUSPEND_RECONN;
ccw->cda = 0;
ccw->count = 0;
ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC;
ccw++;
}
ccw->cmd_code = CCW_CMD_SENSE_ID;
ccw->cda = (__u32) __pa (&cdev->private->senseid);
ccw->count = sizeof (struct senseid);
ccw->flags = CCW_FLAG_SLI;
/* Reset device status. */
memset(&cdev->private->irb, 0, sizeof(struct irb));
/* Try on every path. */
ret = -ENODEV;
while (cdev->private->imask != 0) {
if ((sch->opm & cdev->private->imask) != 0 &&
cdev->private->iretry > 0) {
cdev->private->iretry--;
ret = cio_start (sch, cdev->private->iccws,
cdev->private->imask);
/* ret is 0, -EBUSY, -EACCES or -ENODEV */
if (ret != -EACCES)
return ret;
}
cdev->private->imask >>= 1;
cdev->private->iretry = 5;
}
return ret;
}
void
ccw_device_sense_id_start(struct ccw_device *cdev)
{
int ret;
memset (&cdev->private->senseid, 0, sizeof (struct senseid));
cdev->private->senseid.cu_type = 0xFFFF;
cdev->private->imask = 0x80;
cdev->private->iretry = 5;
ret = __ccw_device_sense_id_start(cdev);
if (ret && ret != -EBUSY)
ccw_device_sense_id_done(cdev, ret);
}
/*
* Called from interrupt context to check if a valid answer
* to Sense ID was received.
*/
static int
ccw_device_check_sense_id(struct ccw_device *cdev)
{
struct subchannel *sch;
struct irb *irb;
sch = to_subchannel(cdev->dev.parent);
irb = &cdev->private->irb;
/* Did we get a proper answer ? */
if (cdev->private->senseid.cu_type != 0xFFFF &&
cdev->private->senseid.reserved == 0xFF) {
if (irb->scsw.count < sizeof (struct senseid) - 8)
cdev->private->flags.esid = 1;
return 0; /* Success */
}
/* Check the error cases. */
if (irb->scsw.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC))
return -ETIME;
if (irb->esw.esw0.erw.cons && (irb->ecw[0] & SNS0_CMD_REJECT)) {
/*
* if the device doesn't support the SenseID
* command further retries wouldn't help ...
* NB: We don't check here for intervention required like we
* did before, because tape devices with no tape inserted
* may present this status *in conjunction with* the
* sense id information. So, for intervention required,
* we use the "whack it until it talks" strategy...
*/
CIO_MSG_EVENT(2, "SenseID : device %04x on Subchannel %04x "
"reports cmd reject\n",
cdev->private->devno, sch->irq);
return -EOPNOTSUPP;
}
if (irb->esw.esw0.erw.cons) {
CIO_MSG_EVENT(2, "SenseID : UC on dev %04x, "
"lpum %02X, cnt %02d, sns :"
" %02X%02X%02X%02X %02X%02X%02X%02X ...\n",
cdev->private->devno,
irb->esw.esw0.sublog.lpum,
irb->esw.esw0.erw.scnt,
irb->ecw[0], irb->ecw[1],
irb->ecw[2], irb->ecw[3],
irb->ecw[4], irb->ecw[5],
irb->ecw[6], irb->ecw[7]);
return -EAGAIN;
}
if (irb->scsw.cc == 3) {
if ((sch->orb.lpm &
sch->schib.pmcw.pim & sch->schib.pmcw.pam) != 0)
CIO_MSG_EVENT(2, "SenseID : path %02X for device %04x on"
" subchannel %04x is 'not operational'\n",
sch->orb.lpm, cdev->private->devno,
sch->irq);
return -EACCES;
}
/* Hmm, whatever happened, try again. */
CIO_MSG_EVENT(2, "SenseID : start_IO() for device %04x on "
"subchannel %04x returns status %02X%02X\n",
cdev->private->devno, sch->irq,
irb->scsw.dstat, irb->scsw.cstat);
return -EAGAIN;
}
/*
* Got interrupt for Sense ID.
*/
void
ccw_device_sense_id_irq(struct ccw_device *cdev, enum dev_event dev_event)
{
struct subchannel *sch;
struct irb *irb;
int ret;
sch = to_subchannel(cdev->dev.parent);
irb = (struct irb *) __LC_IRB;
/* Retry sense id, if needed. */
if (irb->scsw.stctl ==
(SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
if ((irb->scsw.cc == 1) || !irb->scsw.actl) {
ret = __ccw_device_sense_id_start(cdev);
if (ret && ret != -EBUSY)
ccw_device_sense_id_done(cdev, ret);
}
return;
}
if (ccw_device_accumulate_and_sense(cdev, irb) != 0)
return;
ret = ccw_device_check_sense_id(cdev);
memset(&cdev->private->irb, 0, sizeof(struct irb));
switch (ret) {
/* 0, -ETIME, -EOPNOTSUPP, -EAGAIN or -EACCES */
case 0: /* Sense id succeeded. */
case -ETIME: /* Sense id stopped by timeout. */
ccw_device_sense_id_done(cdev, ret);
break;
case -EACCES: /* channel is not operational. */
sch->lpm &= ~cdev->private->imask;
cdev->private->imask >>= 1;
cdev->private->iretry = 5;
/* fall through. */
case -EAGAIN: /* try again. */
ret = __ccw_device_sense_id_start(cdev);
if (ret == 0 || ret == -EBUSY)
break;
/* fall through. */
default: /* Sense ID failed. Try asking VM. */
if (MACHINE_IS_VM) {
VM_virtual_device_info (cdev->private->devno,
&cdev->private->senseid);
if (cdev->private->senseid.cu_type != 0xFFFF) {
/* Got the device information from VM. */
ccw_device_sense_id_done(cdev, 0);
return;
}
}
/*
* If we can't couldn't identify the device type we
* consider the device "not operational".
*/
ccw_device_sense_id_done(cdev, -ENODEV);
break;
}
}
EXPORT_SYMBOL(diag210);
