/*
* drivers/s390/cio/cio.c
* S/390 common I/O routines -- low level i/o calls
*
* Copyright (C) IBM Corp. 1999,2006
* Author(s): Ingo Adlung (adlung@de.ibm.com)
* Cornelia Huck (cornelia.huck@de.ibm.com)
* Arnd Bergmann (arndb@de.ibm.com)
* Martin Schwidefsky (schwidefsky@de.ibm.com)
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/kernel_stat.h>
#include <linux/interrupt.h>
#include <asm/cio.h>
#include <asm/delay.h>
#include <asm/irq.h>
#include <asm/irq_regs.h>
#include <asm/setup.h>
#include <asm/reset.h>
#include <asm/ipl.h>
#include <asm/chpid.h>
#include <asm/airq.h>
#include <asm/cpu.h>
#include "cio.h"
#include "css.h"
#include "chsc.h"
#include "ioasm.h"
#include "io_sch.h"
#include "blacklist.h"
#include "cio_debug.h"
#include "chp.h"
#include "../s390mach.h"
debug_info_t *cio_debug_msg_id;
debug_info_t *cio_debug_trace_id;
debug_info_t *cio_debug_crw_id;
/*
* Function: cio_debug_init
* Initializes three debug logs for common I/O:
* - cio_msg logs generic cio messages
* - cio_trace logs the calling of different functions
* - cio_crw logs machine check related cio messages
*/
static int __init cio_debug_init(void)
{
cio_debug_msg_id = debug_register("cio_msg", 16, 1, 16 * sizeof(long));
if (!cio_debug_msg_id)
goto out_unregister;
debug_register_view(cio_debug_msg_id, &debug_sprintf_view);
debug_set_level(cio_debug_msg_id, 2);
cio_debug_trace_id = debug_register("cio_trace", 16, 1, 16);
if (!cio_debug_trace_id)
goto out_unregister;
debug_register_view(cio_debug_trace_id, &debug_hex_ascii_view);
debug_set_level(cio_debug_trace_id, 2);
cio_debug_crw_id = debug_register("cio_crw", 16, 1, 16 * sizeof(long));
if (!cio_debug_crw_id)
goto out_unregister;
debug_register_view(cio_debug_crw_id, &debug_sprintf_view);
debug_set_level(cio_debug_crw_id, 4);
return 0;
out_unregister:
if (cio_debug_msg_id)
debug_unregister(cio_debug_msg_id);
if (cio_debug_trace_id)
debug_unregister(cio_debug_trace_id);
if (cio_debug_crw_id)
debug_unregister(cio_debug_crw_id);
printk(KERN_WARNING"cio: could not initialize debugging\n");
return -1;
}
arch_initcall (cio_debug_init);
int
cio_set_options (struct subchannel *sch, int flags)
{
sch->options.suspend = (flags & DOIO_ALLOW_SUSPEND) != 0;
sch->options.prefetch = (flags & DOIO_DENY_PREFETCH) != 0;
sch->options.inter = (flags & DOIO_SUPPRESS_INTER) != 0;
return 0;
}
/* FIXME: who wants to use this? */
int
cio_get_options (struct subchannel *sch)
{
int flags;
flags = 0;
if (sch->options.suspend)
flags |= DOIO_ALLOW_SUSPEND;
if (sch->options.prefetch)
flags |= DOIO_DENY_PREFETCH;
if (sch->options.inter)
flags |= DOIO_SUPPRESS_INTER;
return flags;
}
/*
* Use tpi to get a pending interrupt, call the interrupt handler and
* return a pointer to the subchannel structure.
*/
static int
cio_tpi(void)
{
struct tpi_info *tpi_info;
struct subchannel *sch;
struct irb *irb;
tpi_info = (struct tpi_info *) __LC_SUBCHANNEL_ID;
if (tpi (NULL) != 1)
return 0;
irb = (struct irb *) __LC_IRB;
/* Store interrupt response block to lowcore. */
if (tsch (tpi_info->schid, irb) != 0)
/* Not status pending or not operational. */
return 1;
sch = (struct subchannel *)(unsigned long)tpi_info->intparm;
if (!sch)
return 1;
local_bh_disable();
irq_enter ();
spin_lock(sch->lock);
memcpy (&sch->schib.scsw, &irb->scsw, sizeof (struct scsw));
if (sch->driver && sch->driver->irq)
sch->driver->irq(sch);
spin_unlock(sch->lock);
irq_exit ();
_local_bh_enable();
return 1;
}
static int
cio_start_handle_notoper(struct subchannel *sch, __u8 lpm)
{
char dbf_text[15];
if (lpm != 0)
sch->lpm &= ~lpm;
else
sch->lpm = 0;
stsch (sch->schid, &sch->schib);
CIO_MSG_EVENT(2, "cio_start: 'not oper' status for "
"subchannel 0.%x.%04x!\n", sch->schid.ssid,
sch->schid.sch_no);
sprintf(dbf_text, "no%s", sch->dev.bus_id);
CIO_TRACE_EVENT(0, dbf_text);
CIO_HEX_EVENT(0, &sch->schib, sizeof (struct schib));
return (sch->lpm ? -EACCES : -ENODEV);
}
int
cio_start_key (struct subchannel *sch, /* subchannel structure */
struct ccw1 * cpa, /* logical channel prog addr */
__u8 lpm, /* logical path mask */
__u8 key) /* storage key */
{
char dbf_txt[15];
int ccode;
struct orb *orb;
CIO_TRACE_EVENT(4, "stIO");
CIO_TRACE_EVENT(4, sch->dev.bus_id);
orb = &to_io_private(sch)->orb;
/* sch is always under 2G. */
orb->intparm = (u32)(addr_t)sch;
orb->fmt = 1;
orb->pfch = sch->options.prefetch == 0;
orb->spnd = sch->options.suspend;
orb->ssic = sch->options.suspend && sch->options.inter;
orb->lpm = (lpm != 0) ? lpm : sch->lpm;
#ifdef CONFIG_64BIT
/*
* for 64 bit we always support 64 bit IDAWs with 4k page size only
*/
orb->c64 = 1;
orb->i2k = 0;
#endif
orb->key = key >> 4;
/* issue "Start Subchannel" */
orb->cpa = (__u32) __pa(cpa);
ccode = ssch(sch->schid, orb);
/* process condition code */
sprintf(dbf_txt, "ccode:%d", ccode);
CIO_TRACE_EVENT(4, dbf_txt);
switch (ccode) {
case 0:
/*
* initialize device status information
*/
sch->schib.scsw.actl |= SCSW_ACTL_START_PEND;
return 0;
case 1: /* status pending */
case 2: /* busy */
return -EBUSY;
default: /* device/path not operational */
return cio_start_handle_notoper(sch, lpm);
}
}
int
cio_start (struct subchannel *sch, struct ccw1 *cpa, __u8 lpm)
{
return cio_start_key(sch, cpa, lpm, PAGE_DEFAULT_KEY);
}
/*
* resume suspended I/O operation
*/
int
cio_resume (struct subchannel *sch)
{
char dbf_txt[15];
int ccode;
CIO_TRACE_EVENT (4, "resIO");
CIO_TRACE_EVENT (4, sch->dev.bus_id);
ccode = rsch (sch->schid);
sprintf (dbf_txt, "ccode:%d", ccode);
CIO_TRACE_EVENT (4, dbf_txt);
switch (ccode) {
case 0:
sch->schib.scsw.actl |= SCSW_ACTL_RESUME_PEND;
return 0;
case 1:
return -EBUSY;
case 2:
return -EINVAL;
default:
/*
* useless to wait for request completion
* as device is no longer operational !
*/
return -ENODEV;
}
}
/*
* halt I/O operation
*/
int
cio_halt(struct subchannel *sch)
{
char dbf_txt[15];
int ccode;
if (!sch)
return -ENODEV;
CIO_TRACE_EVENT (2, "haltIO");
CIO_TRACE_EVENT (2, sch->dev.bus_id);
/*
* Issue "Halt subchannel" and process condition code
*/
ccode = hsch (sch->schid);
sprintf (dbf_txt, "ccode:%d", ccode);
CIO_TRACE_EVENT (2, dbf_txt);
switch (ccode) {
case 0:
sch->schib.scsw.actl |= SCSW_ACTL_HALT_PEND;
return 0;
case 1: /* status pending */
case 2: /* busy */
return -EBUSY;
default: /* device not operational */
return -ENODEV;
}
}
/*
* Clear I/O operation
*/
int
cio_clear(struct subchannel *sch)
{
char dbf_txt[15];
int ccode;
if (!sch)
return -ENODEV;
CIO_TRACE_EVENT (2, "clearIO");
CIO_TRACE_EVENT (2, sch->dev.bus_id);
/*
* Issue "Clear subchannel" and process condition code
*/
ccode = csch (sch->schid);
sprintf (dbf_txt, "ccode:%d", ccode);
CIO_TRACE_EVENT (2, dbf_txt);
switch (ccode) {
case 0:
sch->schib.scsw.actl |= SCSW_ACTL_CLEAR_PEND;
return 0;
default: /* device not operational */
return -ENODEV;
}
}
/*
* Function: cio_cancel
* Issues a "Cancel Subchannel" on the specified subchannel
* Note: We don't need any fancy intparms and flags here
* since xsch is executed synchronously.
* Only for common I/O internal use as for now.
*/
int
cio_cancel (struct subchannel *sch)
{
char dbf_txt[15];
int ccode;
if (!sch)
return -ENODEV;
CIO_TRACE_EVENT (2, "cancelIO");
CIO_TRACE_EVENT (2, sch->dev.bus_id);
ccode = xsch (sch->schid);
sprintf (dbf_txt, "ccode:%d", ccode);
CIO_TRACE_EVENT (2, dbf_txt);
switch (ccode) {
case 0: /* success */
/* Update information in scsw. */
stsch (sch->schid, &sch->schib);
return 0;
case 1: /* status pending */
return -EBUSY;
case 2: /* not applicable */
return -EINVAL;
default: /* not oper */
return -ENODEV;
}
}
/*
* Function: cio_modify
* Issues a "Modify Subchannel" on the specified subchannel
*/
int
cio_modify (struct subchannel *sch)
{
int ccode, retry, ret;
ret = 0;
for (retry = 0; retry < 5; retry++) {
ccode = msch_err (sch->schid, &sch->schib);
if (ccode < 0) /* -EIO if msch gets a program check. */
return ccode;
switch (ccode) {
case 0: /* successfull */
return 0;
case 1: /* status pending */
return -EBUSY;
case 2: /* busy */
udelay (100); /* allow for recovery */
ret = -EBUSY;
break;
case 3: /* not operational */
return -ENODEV;
}
}
return ret;
}
/*
* Enable subchannel.
*/
int cio_enable_subchannel(struct subchannel *sch, u32 intparm)
{
char dbf_txt[15];
int ccode;
int retry;
int ret;
CIO_TRACE_EVENT (2, "ensch");
CIO_TRACE_EVENT (2, sch->dev.bus_id);
if (sch_is_pseudo_sch(sch))
return -EINVAL;
ccode = stsch (sch->schid, &sch->schib);
if (ccode)
return -ENODEV;
for (retry = 5, ret = 0; retry > 0; retry--) {
sch->schib.pmcw.ena = 1;
sch->schib.pmcw.isc = sch->isc;
sch->schib.pmcw.intparm = intparm;
ret = cio_modify(sch);
if (ret == -ENODEV)
break;
if (ret == -EIO)
/*
* Got a program check in cio_modify. Try without
* the concurrent sense bit the next time.
*/
sch->schib.pmcw.csense = 0;
if (ret == 0) {
stsch (sch->schid, &sch->schib);
if (sch->schib.pmcw.ena)
break;
}
if (ret == -EBUSY) {
struct irb irb;
if (tsch(sch->schid, &irb) != 0)
break;
}
}
sprintf (dbf_txt, "ret:%d", ret);
CIO_TRACE_EVENT (2, dbf_txt);
return ret;
}
/*
* Disable subchannel.
*/
int
cio_disable_subchannel (struct subchannel *sch)
{
char dbf_txt[15];
int ccode;
int retry;
int ret;
CIO_TRACE_EVENT (2, "dissch");
CIO_TRACE_EVENT (2, sch->dev.bus_id);
if (sch_is_pseudo_sch(sch))
return 0;
ccode = stsch (sch->schid, &sch->schib);
if (ccode == 3) /* Not operational. */
return -ENODEV;
if (sch->schib.scsw.actl != 0)
/*
* the disable function must not be called while there are
* requests pending for completion !
*/
return -EBUSY;
for (retry = 5, ret = 0; retry > 0; retry--) {
sch->schib.pmcw.ena = 0;
ret = cio_modify(sch);
if (ret == -ENODEV)
break;
if (ret == -EBUSY)
/*
* The subchannel is busy or status pending.
* We'll disable when the next interrupt was delivered
* via the state machine.
*/
break;
if (ret == 0) {
stsch (sch->schid, &sch->schib);
if (!sch->schib.pmcw.ena)
break;
}
}
sprintf (dbf_txt, "ret:%d", ret);
CIO_TRACE_EVENT (2, dbf_txt);
return ret;
}
int cio_create_sch_lock(struct subchannel *sch)
{
sch->lock = kmalloc(sizeof(spinlock_t), GFP_KERNEL);
if (!sch->lock)
return -ENOMEM;
spin_lock_init(sch->lock);
return 0;
}
/*
* cio_validate_subchannel()
*
* Find out subchannel type and initialize struct subchannel.
* Return codes:
* SUBCHANNEL_TYPE_IO for a normal io subchannel
* SUBCHANNEL_TYPE_CHSC for a chsc subchannel
* SUBCHANNEL_TYPE_MESSAGE for a messaging subchannel
* SUBCHANNEL_TYPE_ADM for a adm(?) subchannel
* -ENXIO for non-defined subchannels
* -ENODEV for subchannels with invalid device number or blacklisted devices
*/
int
cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid)
{
char dbf_txt[15];
int ccode;
int err;
sprintf (dbf_txt, "valsch%x", schid.sch_no);
CIO_TRACE_EVENT (4, dbf_txt);
/* Nuke all fields. */
memset(sch, 0, sizeof(struct subchannel));
sch->schid = schid;
if (cio_is_console(schid)) {
sch->lock = cio_get_console_lock();
} else {
err = cio_create_sch_lock(sch);
if (err)
goto out;
}
mutex_init(&sch->reg_mutex);
/* Set a name for the subchannel */
snprintf (sch->dev.bus_id, BUS_ID_SIZE, "0.%x.%04x", schid.ssid,
schid.sch_no);
/*
* The first subchannel that is not-operational (ccode==3)
* indicates that there aren't any more devices available.
* If stsch gets an exception, it means the current subchannel set
* is not valid.
*/
ccode = stsch_err (schid, &sch->schib);
if (ccode) {
err = (ccode == 3) ? -ENXIO : ccode;
goto out;
}
/* Copy subchannel type from path management control word. */
sch->st = sch->schib.pmcw.st;
/*
* ... just being curious we check for non I/O subchannels
*/
if (sch->st != 0) {
CIO_MSG_EVENT(4, "Subchannel 0.%x.%04x reports "
"non-I/O subchannel type %04X\n",
sch->schid.ssid, sch->schid.sch_no, sch->st);
/* We stop here for non-io subchannels. */
err = sch->st;
goto out;
}
/* Initialization for io subchannels. */
if (!css_sch_is_valid(&sch->schib)) {
err = -ENODEV;
goto out;
}
/* Devno is valid. */
if (is_blacklisted (sch->schid.ssid, sch->schib.pmcw.dev)) {
/*
* This device must not be known to Linux. So we simply
* say that there is no device and return ENODEV.
*/
CIO_MSG_EVENT(6, "Blacklisted device detected "
"at devno %04X, subchannel set %x\n",
sch->schib.pmcw.dev, sch->schid.ssid);
err = -ENODEV;
goto out;
}
if (cio_is_console(sch->schid))
sch->opm = 0xff;
else
sch->opm = chp_get_sch_opm(sch);
sch->lpm = sch->schib.pmcw.pam & sch->opm;
sch->isc = 3;
CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X "
"- PIM = %02X, PAM = %02X, POM = %02X\n",
sch->schib.pmcw.dev, sch->schid.ssid,
sch->schid.sch_no, sch->schib.pmcw.pim,
sch->schib.pmcw.pam, sch->schib.pmcw.pom);
/*
* We now have to initially ...
* ... enable "concurrent sense"
* ... enable "multipath mode" if more than one
* CHPID is available. This is done regardless
* whether multiple paths are available for us.
*/
sch->schib.pmcw.csense = 1; /* concurrent sense */
sch->schib.pmcw.ena = 0;
if ((sch->lpm & (sch->lpm - 1)) != 0)
sch->schib.pmcw.mp = 1; /* multipath mode */
/* clean up possible residual cmf stuff */
sch->schib.pmcw.mme = 0;
sch->schib.pmcw.mbfc = 0;
sch->schib.pmcw.mbi = 0;
sch->schib.mba = 0;
return 0;
out:
if (!cio_is_console(schid))
kfree(sch->lock);
sch->lock = NULL;
return err;
}
/*
* do_IRQ() handles all normal I/O device IRQ's (the special
* SMP cross-CPU interrupts have their own specific
* handlers).
*
*/
void
do_IRQ (struct pt_regs *regs)
{
struct tpi_info *tpi_info;
struct subchannel *sch;
struct irb *irb;
struct pt_regs *old_regs;
old_regs = set_irq_regs(regs);
irq_enter();
s390_idle_check();
if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
/* Serve timer interrupts first. */
clock_comparator_work();
/*
* Get interrupt information from lowcore
*/
tpi_info = (struct tpi_info *) __LC_SUBCHANNEL_ID;
irb = (struct irb *) __LC_IRB;
do {
kstat_cpu(smp_processor_id()).irqs[IO_INTERRUPT]++;
/*
* Non I/O-subchannel thin interrupts are processed differently
*/
if (tpi_info->adapter_IO == 1 &&
tpi_info->int_type == IO_INTERRUPT_TYPE) {
do_adapter_IO();
continue;
}
sch = (struct subchannel *)(unsigned long)tpi_info->intparm;
if (!sch) {
/* Clear pending interrupt condition. */
tsch(tpi_info->schid, irb);
continue;
}
spin_lock(sch->lock);
/* Store interrupt response block to lowcore. */
if (tsch(tpi_info->schid, irb) == 0) {
/* Keep subchannel information word up to date. */
memcpy (&sch->schib.scsw, &irb->scsw,
sizeof (irb->scsw));
/* Call interrupt handler if there is one. */
if (sch->driver && sch->driver->irq)
sch->driver->irq(sch);
}
spin_unlock(sch->lock);
/*
* Are more interrupts pending?
* If so, the tpi instruction will update the lowcore
* to hold the info for the next interrupt.
* We don't do this for VM because a tpi drops the cpu
* out of the sie which costs more cycles than it saves.
*/
} while (!MACHINE_IS_VM && tpi (NULL) != 0);
irq_exit();
set_irq_regs(old_regs);
}
#ifdef CONFIG_CCW_CONSOLE
static struct subchannel console_subchannel;
static struct io_subchannel_private console_priv;
static int console_subchannel_in_use;
void *cio_get_console_priv(void)
{
return &console_priv;
}
/*
* busy wait for the next interrupt on the console
*/
void wait_cons_dev(void)
__releases(console_subchannel.lock)
__acquires(console_subchannel.lock)
{
unsigned long cr6 __attribute__ ((aligned (8)));
unsigned long save_cr6 __attribute__ ((aligned (8)));
/*
* before entering the spinlock we may already have
* processed the interrupt on a different CPU...
*/
if (!console_subchannel_in_use)
return;
/* disable all but isc 7 (console device) */
__ctl_store (save_cr6, 6, 6);
cr6 = 0x01000000;
__ctl_load (cr6, 6, 6);
do {
spin_unlock(console_subchannel.lock);
if (!cio_tpi())
cpu_relax();
spin_lock(console_subchannel.lock);
} while (console_subchannel.schib.scsw.actl != 0);
/*
* restore previous isc value
*/
__ctl_load (save_cr6, 6, 6);
}
static int
cio_test_for_console(struct subchannel_id schid, void *data)
{
if (stsch_err(schid, &console_subchannel.schib) != 0)
return -ENXIO;
if ((console_subchannel.schib.pmcw.st == SUBCHANNEL_TYPE_IO) &&
console_subchannel.schib.pmcw.dnv &&
(console_subchannel.schib.pmcw.dev == console_devno)) {
console_irq = schid.sch_no;
return 1; /* found */
}
return 0;
}
static int
cio_get_console_sch_no(void)
{
struct subchannel_id schid;
init_subchannel_id(&schid);
if (console_irq != -1) {
/* VM provided us with the irq number of the console. */
schid.sch_no = console_irq;
if (stsch(schid, &console_subchannel.schib) != 0 ||
(console_subchannel.schib.pmcw.st != SUBCHANNEL_TYPE_IO) ||
!console_subchannel.schib.pmcw.dnv)
return -1;
console_devno = console_subchannel.schib.pmcw.dev;
} else if (console_devno != -1) {
/* At least the console device number is known. */
for_each_subchannel(cio_test_for_console, NULL);
if (console_irq == -1)
return -1;
} else {
/* unlike in 2.4, we cannot autoprobe here, since
* the channel subsystem is not fully initialized.
* With some luck, the HWC console can take over */
printk(KERN_WARNING "cio: No ccw console found!\n");
return -1;
}
return console_irq;
}
struct subchannel *
cio_probe_console(void)
{
int sch_no, ret;
struct subchannel_id schid;
if (xchg(&console_subchannel_in_use, 1) != 0)
return ERR_PTR(-EBUSY);
sch_no = cio_get_console_sch_no();
if (sch_no == -1) {
console_subchannel_in_use = 0;
return ERR_PTR(-ENODEV);
}
memset(&console_subchannel, 0, sizeof(struct subchannel));
init_subchannel_id(&schid);
schid.sch_no = sch_no;
ret = cio_validate_subchannel(&console_subchannel, schid);
if (ret) {
console_subchannel_in_use = 0;
return ERR_PTR(-ENODEV);
}
/*
* enable console I/O-interrupt subclass 7
*/
ctl_set_bit(6, 24);
console_subchannel.isc = 7;
console_subchannel.schib.pmcw.isc = 7;
console_subchannel.schib.pmcw.intparm =
(u32)(addr_t)&console_subchannel;
ret = cio_modify(&console_subchannel);
if (ret) {
console_subchannel_in_use = 0;
return ERR_PTR(ret);
}
return &console_subchannel;
}
void
cio_release_console(void)
{
console_subchannel.schib.pmcw.intparm = 0;
cio_modify(&console_subchannel);
ctl_clear_bit(6, 24);
console_subchannel_in_use = 0;
}
/* Bah... hack to catch console special sausages. */
int
cio_is_console(struct subchannel_id schid)
{
if (!console_subchannel_in_use)
return 0;
return schid_equal(&schid, &console_subchannel.schid);
}
struct subchannel *
cio_get_console_subchannel(void)
{
if (!console_subchannel_in_use)
return NULL;
return &console_subchannel;
}
#endif
static int
__disable_subchannel_easy(struct subchannel_id schid, struct schib *schib)
{
int retry, cc;
cc = 0;
for (retry=0;retry<3;retry++) {
schib->pmcw.ena = 0;
cc = msch(schid, schib);
if (cc)
return (cc==3?-ENODEV:-EBUSY);
stsch(schid, schib);
if (!schib->pmcw.ena)
return 0;
}
return -EBUSY; /* uhm... */
}
/* we can't use the normal udelay here, since it enables external interrupts */
static void udelay_reset(unsigned long usecs)
{
uint64_t start_cc, end_cc;
asm volatile ("STCK %0" : "=m" (start_cc));
do {
cpu_relax();
asm volatile ("STCK %0" : "=m" (end_cc));
} while (((end_cc - start_cc)/4096) < usecs);
}
static int
__clear_subchannel_easy(struct subchannel_id schid)
{
int retry;
if (csch(schid))
return -ENODEV;
for (retry=0;retry<20;retry++) {
struct tpi_info ti;
if (tpi(&ti)) {
tsch(ti.schid, (struct irb *)__LC_IRB);
if (schid_equal(&ti.schid, &schid))
return 0;
}
udelay_reset(100);
}
return -EBUSY;
}
static int pgm_check_occured;
static void cio_reset_pgm_check_handler(void)
{
pgm_check_occured = 1;
}
static int stsch_reset(struct subchannel_id schid, volatile struct schib *addr)
{
int rc;
pgm_check_occured = 0;
s390_base_pgm_handler_fn = cio_reset_pgm_check_handler;
rc = stsch(schid, addr);
s390_base_pgm_handler_fn = NULL;
/* The program check handler could have changed pgm_check_occured. */
barrier();
if (pgm_check_occured)
return -EIO;
else
return rc;
}
static int __shutdown_subchannel_easy(struct subchannel_id schid, void *data)
{
struct schib schib;
if (stsch_reset(schid, &schib))
return -ENXIO;
if (!schib.pmcw.ena)
return 0;
switch(__disable_subchannel_easy(schid, &schib)) {
case 0:
case -ENODEV:
break;
default: /* -EBUSY */
if (__clear_subchannel_easy(schid))
break; /* give up... */
stsch(schid, &schib);
__disable_subchannel_easy(schid, &schib);
}
return 0;
}
static atomic_t chpid_reset_count;
static void s390_reset_chpids_mcck_handler(void)
{
struct crw crw;
struct mci *mci;
/* Check for pending channel report word. */
mci = (struct mci *)&S390_lowcore.mcck_interruption_code;
if (!mci->cp)
return;
/* Process channel report words. */
while (stcrw(&crw) == 0) {
/* Check for responses to RCHP. */
if (crw.slct && crw.rsc == CRW_RSC_CPATH)
atomic_dec(&chpid_reset_count);
}
}
#define RCHP_TIMEOUT (30 * USEC_PER_SEC)
static void css_reset(void)
{
int i, ret;
unsigned long long timeout;
struct chp_id chpid;
/* Reset subchannels. */
for_each_subchannel(__shutdown_subchannel_easy, NULL);
/* Reset channel paths. */
s390_base_mcck_handler_fn = s390_reset_chpids_mcck_handler;
/* Enable channel report machine checks. */
__ctl_set_bit(14, 28);
/* Temporarily reenable machine checks. */
local_mcck_enable();
chp_id_init(&chpid);
for (i = 0; i <= __MAX_CHPID; i++) {
chpid.id = i;
ret = rchp(chpid);
if ((ret == 0) || (ret == 2))
/*
* rchp either succeeded, or another rchp is already
* in progress. In either case, we'll get a crw.
*/
atomic_inc(&chpid_reset_count);
}
/* Wait for machine check for all channel paths. */
timeout = get_clock() + (RCHP_TIMEOUT << 12);
while (atomic_read(&chpid_reset_count) != 0) {
if (get_clock() > timeout)
break;
cpu_relax();
}
/* Disable machine checks again. */
local_mcck_disable();
/* Disable channel report machine checks. */
__ctl_clear_bit(14, 28);
s390_base_mcck_handler_fn = NULL;
}
static struct reset_call css_reset_call = {
.fn = css_reset,
};
static int __init init_css_reset_call(void)
{
atomic_set(&chpid_reset_count, 0);
register_reset_call(&css_reset_call);
return 0;
}
arch_initcall(init_css_reset_call);
struct sch_match_id {
struct subchannel_id schid;
struct ccw_dev_id devid;
int rc;
};
static int __reipl_subchannel_match(struct subchannel_id schid, void *data)
{
struct schib schib;
struct sch_match_id *match_id = data;
if (stsch_reset(schid, &schib))
return -ENXIO;
if ((schib.pmcw.st == SUBCHANNEL_TYPE_IO) && schib.pmcw.dnv &&
(schib.pmcw.dev == match_id->devid.devno) &&
(schid.ssid == match_id->devid.ssid)) {
match_id->schid = schid;
match_id->rc = 0;
return 1;
}
return 0;
}
static int reipl_find_schid(struct ccw_dev_id *devid,
struct subchannel_id *schid)
{
struct sch_match_id match_id;
match_id.devid = *devid;
match_id.rc = -ENODEV;
for_each_subchannel(__reipl_subchannel_match, &match_id);
if (match_id.rc == 0)
*schid = match_id.schid;
return match_id.rc;
}
extern void do_reipl_asm(__u32 schid);
/* Make sure all subchannels are quiet before we re-ipl an lpar. */
void reipl_ccw_dev(struct ccw_dev_id *devid)
{
struct subchannel_id schid;
s390_reset_system();
if (reipl_find_schid(devid, &schid) != 0)
panic("IPL Device not found\n");
do_reipl_asm(*((__u32*)&schid));
}
int __init cio_get_iplinfo(struct cio_iplinfo *iplinfo)
{
struct subchannel_id schid;
struct schib schib;
schid = *(struct subchannel_id *)__LC_SUBCHANNEL_ID;
if (!schid.one)
return -ENODEV;
if (stsch(schid, &schib))
return -ENODEV;
if (schib.pmcw.st != SUBCHANNEL_TYPE_IO)
return -ENODEV;
if (!schib.pmcw.dnv)
return -ENODEV;
iplinfo->devno = schib.pmcw.dev;
iplinfo->is_qdio = schib.pmcw.qf;
return 0;
}