/*
* Real Time Clock interface for StrongARM SA1x00 and XScale PXA2xx
*
* Copyright (c) 2000 Nils Faerber
*
* Based on rtc.c by Paul Gortmaker
*
* Original Driver by Nils Faerber <nils@kernelconcepts.de>
*
* Modifications from:
* CIH <cih@coventive.com>
* Nicolas Pitre <nico@fluxnic.net>
* Andrew Christian <andrew.christian@hp.com>
*
* Converted to the RTC subsystem and Driver Model
* by Richard Purdie <rpurdie@rpsys.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/rtc.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
#include <mach/regs-rtc.h>
#endif
#define RTC_DEF_DIVIDER (32768 - 1)
#define RTC_DEF_TRIM 0
#define RTC_FREQ 1024
struct sa1100_rtc {
spinlock_t lock;
int irq_1hz;
int irq_alarm;
struct rtc_device *rtc;
struct clk *clk;
};
static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
{
struct sa1100_rtc *info = dev_get_drvdata(dev_id);
struct rtc_device *rtc = info->rtc;
unsigned int rtsr;
unsigned long events = 0;
spin_lock(&info->lock);
rtsr = RTSR;
/* clear interrupt sources */
RTSR = 0;
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_probe(). */
if (rtsr & (RTSR_ALE | RTSR_HZE)) {
/* This is the original code, before there was the if test
* above. This code does not clear interrupts that were not
* enabled. */
RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
} else {
/* For some reason, it is possible to enter this routine
* without interruptions enabled, it has been tested with
* several units (Bug in SA11xx chip?).
*
* This situation leads to an infinite "loop" of interrupt
* routine calling and as a result the processor seems to
* lock on its first call to open(). */
RTSR = RTSR_AL | RTSR_HZ;
}
/* clear alarm interrupt if it has occurred */
if (rtsr & RTSR_AL)
rtsr &= ~RTSR_ALE;
RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
/* update irq data & counter */
if (rtsr & RTSR_AL)
events |= RTC_AF | RTC_IRQF;
if (rtsr & RTSR_HZ)
events |= RTC_UF | RTC_IRQF;
rtc_update_irq(rtc, 1, events);
spin_unlock(&info->lock);
return IRQ_HANDLED;
}
static int sa1100_rtc_open(struct device *dev)
{
struct sa1100_rtc *info = dev_get_drvdata(dev);
struct rtc_device *rtc = info->rtc;
int ret;
ret = clk_prepare_enable(info->clk);
if (ret)
goto fail_clk;
ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, 0, "rtc 1Hz", dev);
if (ret) {
dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz);
goto fail_ui;
}
ret = request_irq(info->irq_alarm, sa1100_rtc_interrupt, 0, "rtc Alrm", dev);
if (ret) {
dev_err(dev, "IRQ %d already in use.\n", info->irq_alarm);
goto fail_ai;
}
rtc->max_user_freq = RTC_FREQ;
rtc_irq_set_freq(rtc, NULL, RTC_FREQ);
return 0;
fail_ai:
free_irq(info->irq_1hz, dev);
fail_ui:
clk_disable_unprepare(info->clk);
fail_clk:
return ret;
}
static void sa1100_rtc_release(struct device *dev)
{
struct sa1100_rtc *info = dev_get_drvdata(dev);
spin_lock_irq(&info->lock);
RTSR = 0;
spin_unlock_irq(&info->lock);
free_irq(info->irq_alarm, dev);
free_irq(info->irq_1hz, dev);
clk_disable_unprepare(info->clk);
}
static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct sa1100_rtc *info = dev_get_drvdata(dev);
spin_lock_irq(&info->lock);
if (enabled)
RTSR |= RTSR_ALE;
else
RTSR &= ~RTSR_ALE;
spin_unlock_irq(&info->lock);
return 0;
}
static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
rtc_time_to_tm(RCNR, tm);
return 0;
}
static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
unsigned long time;
int ret;
ret = rtc_tm_to_time(tm, &time);
if (ret == 0)
RCNR = time;
return ret;
}
static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
u32 rtsr;
rtsr = RTSR;
alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
return 0;
}
static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct sa1100_rtc *info = dev_get_drvdata(dev);
unsigned long time;
int ret;
spin_lock_irq(&info->lock);
ret = rtc_tm_to_time(&alrm->time, &time);
if (ret != 0)
goto out;
RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
RTAR = time;
if (alrm->enabled)
RTSR |= RTSR_ALE;
else
RTSR &= ~RTSR_ALE;
out:
spin_unlock_irq(&info->lock);
return ret;
}
static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
{
seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
return 0;
}
static const struct rtc_class_ops sa1100_rtc_ops = {
.open = sa1100_rtc_open,
.release = sa1100_rtc_release,
.read_time = sa1100_rtc_read_time,
.set_time = sa1100_rtc_set_time,
.read_alarm = sa1100_rtc_read_alarm,
.set_alarm = sa1100_rtc_set_alarm,
.proc = sa1100_rtc_proc,
.alarm_irq_enable = sa1100_rtc_alarm_irq_enable,
};
static int sa1100_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct sa1100_rtc *info;
int irq_1hz, irq_alarm, ret = 0;
irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
if (irq_1hz < 0 || irq_alarm < 0)
return -ENODEV;
info = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(info->clk)) {
dev_err(&pdev->dev, "failed to find rtc clock source\n");
ret = PTR_ERR(info->clk);
goto err_clk;
}
info->irq_1hz = irq_1hz;
info->irq_alarm = irq_alarm;
spin_lock_init(&info->lock);
platform_set_drvdata(pdev, info);
/*
* According to the manual we should be able to let RTTR be zero
* and then a default diviser for a 32.768KHz clock is used.
* Apparently this doesn't work, at least for my SA1110 rev 5.
* If the clock divider is uninitialized then reset it to the
* default value to get the 1Hz clock.
*/
if (RTTR == 0) {
RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
dev_warn(&pdev->dev, "warning: "
"initializing default clock divider/trim value\n");
/* The current RTC value probably doesn't make sense either */
RCNR = 0;
}
device_init_wakeup(&pdev->dev, 1);
rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
THIS_MODULE);
if (IS_ERR(rtc)) {
ret = PTR_ERR(rtc);
goto err_dev;
}
info->rtc = rtc;
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_interrupt().
*
* Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an
* interrupt pending, even though interrupts were never enabled.
* In this case, this bit it must be reset before enabling
* interruptions to avoid a nonexistent interrupt to occur.
*
* In principle, the same problem would apply to bit 0, although it has
* never been observed to happen.
*
* This issue is addressed both here and in sa1100_rtc_interrupt().
* If the issue is not addressed here, in the times when the processor
* wakes up with the bit set there will be one spurious interrupt.
*
* The issue is also dealt with in sa1100_rtc_interrupt() to be on the
* safe side, once the condition that lead to this strange
* initialization is unknown and could in principle happen during
* normal processing.
*
* Notice that clearing bit 1 and 0 is accomplished by writting ONES to
* the corresponding bits in RTSR. */
RTSR = RTSR_AL | RTSR_HZ;
return 0;
err_dev:
platform_set_drvdata(pdev, NULL);
clk_put(info->clk);
err_clk:
kfree(info);
return ret;
}
static int sa1100_rtc_remove(struct platform_device *pdev)
{
struct sa1100_rtc *info = platform_get_drvdata(pdev);
if (info) {
rtc_device_unregister(info->rtc);
clk_put(info->clk);
platform_set_drvdata(pdev, NULL);
kfree(info);
}
return 0;
}
#ifdef CONFIG_PM
static int sa1100_rtc_suspend(struct device *dev)
{
struct sa1100_rtc *info = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
enable_irq_wake(info->irq_alarm);
return 0;
}
static int sa1100_rtc_resume(struct device *dev)
{
struct sa1100_rtc *info = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
disable_irq_wake(info->irq_alarm);
return 0;
}
static const struct dev_pm_ops sa1100_rtc_pm_ops = {
.suspend = sa1100_rtc_suspend,
.resume = sa1100_rtc_resume,
};
#endif
static struct of_device_id sa1100_rtc_dt_ids[] = {
{ .compatible = "mrvl,sa1100-rtc", },
{ .compatible = "mrvl,mmp-rtc", },
{}
};
MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
static struct platform_driver sa1100_rtc_driver = {
.probe = sa1100_rtc_probe,
.remove = sa1100_rtc_remove,
.driver = {
.name = "sa1100-rtc",
#ifdef CONFIG_PM
.pm = &sa1100_rtc_pm_ops,
#endif
.of_match_table = sa1100_rtc_dt_ids,
},
};
module_platform_driver(sa1100_rtc_driver);
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("SA11x0/PXA2xx Realtime Clock Driver (RTC)");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:sa1100-rtc");
