/*
* $Id: pci.c,v 1.91 1999/01/21 13:34:01 davem Exp $
*
* PCI Bus Services, see include/linux/pci.h for further explanation.
*
* Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
* David Mosberger-Tang
*
* Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* @bus: pointer to PCI bus structure to search
*
* Given a PCI bus, returns the highest PCI bus number present in the set
* including the given PCI bus and its list of child PCI buses.
*/
unsigned char __devinit
pci_bus_max_busnr(struct pci_bus* bus)
{
struct list_head *tmp;
unsigned char max, n;
max = bus->number;
list_for_each(tmp, &bus->children) {
n = pci_bus_max_busnr(pci_bus_b(tmp));
if(n > max)
max = n;
}
return max;
}
/**
* pci_max_busnr - returns maximum PCI bus number
*
* Returns the highest PCI bus number present in the system global list of
* PCI buses.
*/
unsigned char __devinit
pci_max_busnr(void)
{
struct pci_bus *bus = NULL;
unsigned char max, n;
max = 0;
while ((bus = pci_find_next_bus(bus)) != NULL) {
n = pci_bus_max_busnr(bus);
if(n > max)
max = n;
}
return max;
}
static int __pci_bus_find_cap(struct pci_bus *bus, unsigned int devfn, u8 hdr_type, int cap)
{
u16 status;
u8 pos, id;
int ttl = 48;
pci_bus_read_config_word(bus, devfn, PCI_STATUS, &status);
if (!(status & PCI_STATUS_CAP_LIST))
return 0;
switch (hdr_type) {
case PCI_HEADER_TYPE_NORMAL:
case PCI_HEADER_TYPE_BRIDGE:
pci_bus_read_config_byte(bus, devfn, PCI_CAPABILITY_LIST, &pos);
break;
case PCI_HEADER_TYPE_CARDBUS:
pci_bus_read_config_byte(bus, devfn, PCI_CB_CAPABILITY_LIST, &pos);
break;
default:
return 0;
}
while (ttl-- && pos >= 0x40) {
pos &= ~3;
pci_bus_read_config_byte(bus, devfn, pos + PCI_CAP_LIST_ID, &id);
if (id == 0xff)
break;
if (id == cap)
return pos;
pci_bus_read_config_byte(bus, devfn, pos + PCI_CAP_LIST_NEXT, &pos);
}
return 0;
}
/**
* pci_find_capability - query for devices' capabilities
* @dev: PCI device to query
* @cap: capability code
*
* Tell if a device supports a given PCI capability.
* Returns the address of the requested capability structure within the
* device's PCI configuration space or 0 in case the device does not
* support it. Possible values for @cap:
*
* %PCI_CAP_ID_PM Power Management
* %PCI_CAP_ID_AGP Accelerated Graphics Port
* %PCI_CAP_ID_VPD Vital Product Data
* %PCI_CAP_ID_SLOTID Slot Identification
* %PCI_CAP_ID_MSI Message Signalled Interrupts
* %PCI_CAP_ID_CHSWP CompactPCI HotSwap
* %PCI_CAP_ID_PCIX PCI-X
* %PCI_CAP_ID_EXP PCI Express
*/
int pci_find_capability(struct pci_dev *dev, int cap)
{
return __pci_bus_find_cap(dev->bus, dev->devfn, dev->hdr_type, cap);
}
/**
* pci_bus_find_capability - query for devices' capabilities
* @bus: the PCI bus to query
* @devfn: PCI device to query
* @cap: capability code
*
* Like pci_find_capability() but works for pci devices that do not have a
* pci_dev structure set up yet.
*
* Returns the address of the requested capability structure within the
* device's PCI configuration space or 0 in case the device does not
* support it.
*/
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap)
{
u8 hdr_type;
pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type);
return __pci_bus_find_cap(bus, devfn, hdr_type & 0x7f, cap);
}
/**
* pci_find_ext_capability - Find an extended capability
* @dev: PCI device to query
* @cap: capability code
*
* Returns the address of the requested extended capability structure
* within the device's PCI configuration space or 0 if the device does
* not support it. Possible values for @cap:
*
* %PCI_EXT_CAP_ID_ERR Advanced Error Reporting
* %PCI_EXT_CAP_ID_VC Virtual Channel
* %PCI_EXT_CAP_ID_DSN Device Serial Number
* %PCI_EXT_CAP_ID_PWR Power Budgeting
*/
int pci_find_ext_capability(struct pci_dev *dev, int cap)
{
u32 header;
int ttl = 480; /* 3840 bytes, minimum 8 bytes per capability */
int pos = 0x100;
if (dev->cfg_size <= 256)
return 0;
if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
return 0;
/*
* If we have no capabilities, this is indicated by cap ID,
* cap version and next pointer all being 0.
*/
if (header == 0)
return 0;
while (ttl-- > 0) {
if (PCI_EXT_CAP_ID(header) == cap)
return pos;
pos = PCI_EXT_CAP_NEXT(header);
if (pos < 0x100)
break;
if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
break;
}
return 0;
}
/**
* pci_find_parent_resource - return resource region of parent bus of given region
* @dev: PCI device structure contains resources to be searched
* @res: child resource record for which parent is sought
*
* For given resource region of given device, return the resource
* region of parent bus the given region is contained in or where
* it should be allocated from.
*/
struct resource *
pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
{
const struct pci_bus *bus = dev->bus;
int i;
struct resource *best = NULL;
for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
struct resource *r = bus->resource[i];
if (!r)
continue;
if (res->start && !(res->start >= r->start && res->end <= r->end))
continue; /* Not contained */
if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
continue; /* Wrong type */
if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH))
return r; /* Exact match */
if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH))
best = r; /* Approximating prefetchable by non-prefetchable */
}
return best;
}
/**
* pci_set_power_state - Set the power state of a PCI device
* @dev: PCI device to be suspended
* @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering
*
* Transition a device to a new power state, using the Power Management
* Capabilities in the device's config space.
*
* RETURN VALUE:
* -EINVAL if trying to enter a lower state than we're already in.
* 0 if we're already in the requested state.
* -EIO if device does not support PCI PM.
* 0 if we can successfully change the power state.
*/
int
pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
int pm;
u16 pmcsr, pmc;
/* bound the state we're entering */
if (state > PCI_D3hot)
state = PCI_D3hot;
/* Validate current state:
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
*/
if (state != PCI_D0 && dev->current_state > state)
return -EINVAL;
else if (dev->current_state == state)
return 0; /* we're already there */
/* find PCI PM capability in list */
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
/* abort if the device doesn't support PM capabilities */
if (!pm)
return -EIO;
pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
if ((pmc & PCI_PM_CAP_VER_MASK) > 2) {
printk(KERN_DEBUG
"PCI: %s has unsupported PM cap regs version (%u)\n",
pci_name(dev), pmc & PCI_PM_CAP_VER_MASK);
return -EIO;
}
/* check if this device supports the desired state */
if (state == PCI_D1 || state == PCI_D2) {
if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
return -EIO;
else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
return -EIO;
}
/* If we're in D3, force entire word to 0.
* This doesn't affect PME_Status, disables PME_En, and
* sets PowerState to 0.
*/
if (dev->current_state >= PCI_D3hot)
pmcsr = 0;
else {
pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
pmcsr |= state;
}
/* enter specified state */
pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr);
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
msleep(10);
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(200);
dev->current_state = state;
return 0;
}
/**
* pci_choose_state - Choose the power state of a PCI device
* @dev: PCI device to be suspended
* @state: target sleep state for the whole system. This is the value
* that is passed to suspend() function.
*
* Returns PCI power state suitable for given device and given system
* message.
*/
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
return PCI_D0;
switch (state) {
case 0: return PCI_D0;
case 3: return PCI_D3hot;
default:
printk("They asked me for state %d\n", state);
BUG();
}
return PCI_D0;
}
EXPORT_SYMBOL(pci_choose_state);
/**
* pci_save_state - save the PCI configuration space of a device before suspending
* @dev: - PCI device that we're dealing with
* @buffer: - buffer to hold config space context
*
* @buffer must be large enough to hold the entire PCI 2.2 config space
* (>= 64 bytes).
*/
int
pci_save_state(struct pci_dev *dev)
{
int i;
/* XXX: 100% dword access ok here? */
for (i = 0; i < 16; i++)
pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
return 0;
}
/**
* pci_restore_state - Restore the saved state of a PCI device
* @dev: - PCI device that we're dealing with
* @buffer: - saved PCI config space
*
*/
int
pci_restore_state(struct pci_dev *dev)
{
int i;
for (i = 0; i < 16; i++)
pci_write_config_dword(dev,i * 4, dev->saved_config_space[i]);
return 0;
}
/**
* pci_enable_device_bars - Initialize some of a device for use
* @dev: PCI device to be initialized
* @bars: bitmask of BAR's that must be configured
*
* Initialize device before it's used by a driver. Ask low-level code
* to enable selected I/O and memory resources. Wake up the device if it
* was suspended. Beware, this function can fail.
*/
int
pci_enable_device_bars(struct pci_dev *dev, int bars)
{
int err;
pci_set_power_state(dev, PCI_D0);
if ((err = pcibios_enable_device(dev, bars)) < 0)
return err;
return 0;
}
/**
* pci_enable_device - Initialize device before it's used by a driver.
* @dev: PCI device to be initialized
*
* Initialize device before it's used by a driver. Ask low-level code
* to enable I/O and memory. Wake up the device if it was suspended.
* Beware, this function can fail.
*/
int
pci_enable_device(struct pci_dev *dev)
{
int err;
if ((err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1)))
return err;
pci_fixup_device(pci_fixup_enable, dev);
dev->is_enabled = 1;
return 0;
}
/**
* pcibios_disable_device - disable arch specific PCI resources for device dev
* @dev: the PCI device to disable
*
* Disables architecture specific PCI resources for the device. This
* is the default implementation. Architecture implementations can
* override this.
*/
void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
/**
* pci_disable_device - Disable PCI device after use
* @dev: PCI device to be disabled
*
* Signal to the system that the PCI device is not in use by the system
* anymore. This only involves disabling PCI bus-mastering, if active.
*/
void
pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
dev->is_busmaster = 0;
pcibios_disable_device(dev);
dev->is_enabled = 0;
}
/**
* pci_enable_wake - enable device to generate PME# when suspended
* @dev: - PCI device to operate on
* @state: - Current state of device.
* @enable: - Flag to enable or disable generation
*
* Set the bits in the device's PM Capabilities to generate PME# when
* the system is suspended.
*
* -EIO is returned if device doesn't have PM Capabilities.
* -EINVAL is returned if device supports it, but can't generate wake events.
* 0 if operation is successful.
*
*/
int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
{
int pm;
u16 value;
/* find PCI PM capability in list */
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
/* If device doesn't support PM Capabilities, but request is to disable
* wake events, it's a nop; otherwise fail */
if (!pm)
return enable ? -EIO : 0;
/* Check device's ability to generate PME# */
pci_read_config_word(dev,pm+PCI_PM_PMC,&value);
value &= PCI_PM_CAP_PME_MASK;
value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
/* Check if it can generate PME# from requested state. */
if (!value || !(value & (1 << state)))
return enable ? -EINVAL : 0;
pci_read_config_word(dev, pm + PCI_PM_CTRL, &value);
/* Clear PME_Status by writing 1 to it and enable PME# */
value |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
if (!enable)
value &= ~PCI_PM_CTRL_PME_ENABLE;
pci_write_config_word(dev, pm + PCI_PM_CTRL, value);
return 0;
}
int
pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
{
u8 pin;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (!pin)
return -1;
pin--;
while (dev->bus->self) {
pin = (pin + PCI_SLOT(dev->devfn)) % 4;
dev = dev->bus->self;
}
*bridge = dev;
return pin;
}
/**
* pci_release_region - Release a PCI bar
* @pdev: PCI device whose resources were previously reserved by pci_request_region
* @bar: BAR to release
*
* Releases the PCI I/O and memory resources previously reserved by a
* successful call to pci_request_region. Call this function only
* after all use of the PCI regions has ceased.
*/
void pci_release_region(struct pci_dev *pdev, int bar)
{
if (pci_resource_len(pdev, bar) == 0)
return;
if (pci_resource_flags(pdev, bar) & IORESOURCE_IO)
release_region(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar));
else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM)
release_mem_region(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar));
}
/**
* pci_request_region - Reserved PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
* @res_name: Name to be associated with resource.
*
* Mark the PCI region associated with PCI device @pdev BR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
int pci_request_region(struct pci_dev *pdev, int bar, char *res_name)
{
if (pci_resource_len(pdev, bar) == 0)
return 0;
if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) {
if (!request_region(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar), res_name))
goto err_out;
}
else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
if (!request_mem_region(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar), res_name))
goto err_out;
}
return 0;
err_out:
printk (KERN_WARNING "PCI: Unable to reserve %s region #%d:%lx@%lx for device %s\n",
pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
bar + 1, /* PCI BAR # */
pci_resource_len(pdev, bar), pci_resource_start(pdev, bar),
pci_name(pdev));
return -EBUSY;
}
/**
* pci_release_regions - Release reserved PCI I/O and memory resources
* @pdev: PCI device whose resources were previously reserved by pci_request_regions
*
* Releases all PCI I/O and memory resources previously reserved by a
* successful call to pci_request_regions. Call this function only
* after all use of the PCI regions has ceased.
*/
void pci_release_regions(struct pci_dev *pdev)
{
int i;
for (i = 0; i < 6; i++)
pci_release_region(pdev, i);
}
/**
* pci_request_regions - Reserved PCI I/O and memory resources
* @pdev: PCI device whose resources are to be reserved
* @res_name: Name to be associated with resource.
*
* Mark all PCI regions associated with PCI device @pdev as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
int pci_request_regions(struct pci_dev *pdev, char *res_name)
{
int i;
for (i = 0; i < 6; i++)
if(pci_request_region(pdev, i, res_name))
goto err_out;
return 0;
err_out:
while(--i >= 0)
pci_release_region(pdev, i);
return -EBUSY;
}
/**
* pci_set_master - enables bus-mastering for device dev
* @dev: the PCI device to enable
*
* Enables bus-mastering on the device and calls pcibios_set_master()
* to do the needed arch specific settings.
*/
void
pci_set_master(struct pci_dev *dev)
{
u16 cmd;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_MASTER)) {
pr_debug("PCI: Enabling bus mastering for device %s\n", pci_name(dev));
cmd |= PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
dev->is_busmaster = 1;
pcibios_set_master(dev);
}
#ifndef HAVE_ARCH_PCI_MWI
/* This can be overridden by arch code. */
u8 pci_cache_line_size = L1_CACHE_BYTES >> 2;
/**
* pci_generic_prep_mwi - helper function for pci_set_mwi
* @dev: the PCI device for which MWI is enabled
*
* Helper function for generic implementation of pcibios_prep_mwi
* function. Originally copied from drivers/net/acenic.c.
* Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
static int
pci_generic_prep_mwi(struct pci_dev *dev)
{
u8 cacheline_size;
if (!pci_cache_line_size)
return -EINVAL; /* The system doesn't support MWI. */
/* Validate current setting: the PCI_CACHE_LINE_SIZE must be
equal to or multiple of the right value. */
pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cacheline_size);
if (cacheline_size >= pci_cache_line_size &&
(cacheline_size % pci_cache_line_size) == 0)
return 0;
/* Write the correct value. */
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size);
/* Read it back. */
pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cacheline_size);
if (cacheline_size == pci_cache_line_size)
return 0;
printk(KERN_DEBUG "PCI: cache line size of %d is not supported "
"by device %s\n", pci_cache_line_size << 2, pci_name(dev));
return -EINVAL;
}
#endif /* !HAVE_ARCH_PCI_MWI */
/**
* pci_set_mwi - enables memory-write-invalidate PCI transaction
* @dev: the PCI device for which MWI is enabled
*
* Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND,
* and then calls @pcibios_set_mwi to do the needed arch specific
* operations or a generic mwi-prep function.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
int
pci_set_mwi(struct pci_dev *dev)
{
int rc;
u16 cmd;
#ifdef HAVE_ARCH_PCI_MWI
rc = pcibios_prep_mwi(dev);
#else
rc = pci_generic_prep_mwi(dev);
#endif
if (rc)
return rc;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_INVALIDATE)) {
pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", pci_name(dev));
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
}
/**
* pci_clear_mwi - disables Memory-Write-Invalidate for device dev
* @dev: the PCI device to disable
*
* Disables PCI Memory-Write-Invalidate transaction on the device
*/
void
pci_clear_mwi(struct pci_dev *dev)
{
u16 cmd;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (cmd & PCI_COMMAND_INVALIDATE) {
cmd &= ~PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
}
#ifndef HAVE_ARCH_PCI_SET_DMA_MASK
/*
* These can be overridden by arch-specific implementations
*/
int
pci_set_dma_mask(struct pci_dev *dev, u64 mask)
{
if (!pci_dma_supported(dev, mask))
return -EIO;
dev->dma_mask = mask;
return 0;
}
int
pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
{
if (!pci_dma_supported(dev, mask))
return -EIO;
dev->dev.coherent_dma_mask = mask;
return 0;
}
#endif
static int __devinit pci_init(void)
{
struct pci_dev *dev = NULL;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
pci_fixup_device(pci_fixup_final, dev);
}
return 0;
}
static int __devinit pci_setup(char *str)
{
while (str) {
char *k = strchr(str, ',');
if (k)
*k++ = 0;
if (*str && (str = pcibios_setup(str)) && *str) {
/* PCI layer options should be handled here */
printk(KERN_ERR "PCI: Unknown option `%s'\n", str);
}
str = k;
}
return 1;
}
device_initcall(pci_init);
__setup("pci=", pci_setup);
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
/* FIXME: Some boxes have multiple ISA bridges! */
struct pci_dev *isa_bridge;
EXPORT_SYMBOL(isa_bridge);
#endif
EXPORT_SYMBOL(pci_enable_device_bars);
EXPORT_SYMBOL(pci_enable_device);
EXPORT_SYMBOL(pci_disable_device);
EXPORT_SYMBOL(pci_max_busnr);
EXPORT_SYMBOL(pci_bus_max_busnr);
EXPORT_SYMBOL(pci_find_capability);
EXPORT_SYMBOL(pci_bus_find_capability);
EXPORT_SYMBOL(pci_release_regions);
EXPORT_SYMBOL(pci_request_regions);
EXPORT_SYMBOL(pci_release_region);
EXPORT_SYMBOL(pci_request_region);
EXPORT_SYMBOL(pci_set_master);
EXPORT_SYMBOL(pci_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
EXPORT_SYMBOL(pci_set_dma_mask);
EXPORT_SYMBOL(pci_set_consistent_dma_mask);
EXPORT_SYMBOL(pci_assign_resource);
EXPORT_SYMBOL(pci_find_parent_resource);
EXPORT_SYMBOL(pci_set_power_state);
EXPORT_SYMBOL(pci_save_state);
EXPORT_SYMBOL(pci_restore_state);
EXPORT_SYMBOL(pci_enable_wake);
/* Quirk info */
EXPORT_SYMBOL(isa_dma_bridge_buggy);
EXPORT_SYMBOL(pci_pci_problems);
