/*
* Standard Hot Plug Controller Driver
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include "../pci.h"
#include "shpchp.h"
static void program_fw_provided_values(struct pci_dev *dev)
{
u16 pci_cmd, pci_bctl;
struct pci_dev *cdev;
struct hotplug_params hpp;
/* Program hpp values for this device */
if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
return;
/* use default values if we can't get them from firmware */
if (get_hp_params_from_firmware(dev, &hpp) ||
!hpp.t0 || (hpp.t0->revision > 1)) {
warn("Could not get hotplug parameters. Use defaults\n");
hpp.t0 = &hpp.type0_data;
hpp.t0->revision = 0;
hpp.t0->cache_line_size = 8;
hpp.t0->latency_timer = 0x40;
hpp.t0->enable_serr = 0;
hpp.t0->enable_perr = 0;
}
pci_write_config_byte(dev,
PCI_CACHE_LINE_SIZE, hpp.t0->cache_line_size);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.t0->latency_timer);
pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
if (hpp.t0->enable_serr)
pci_cmd |= PCI_COMMAND_SERR;
else
pci_cmd &= ~PCI_COMMAND_SERR;
if (hpp.t0->enable_perr)
pci_cmd |= PCI_COMMAND_PARITY;
else
pci_cmd &= ~PCI_COMMAND_PARITY;
pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
/* Program bridge control value and child devices */
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
hpp.t0->latency_timer);
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
if (hpp.t0->enable_serr)
pci_bctl |= PCI_BRIDGE_CTL_SERR;
else
pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
if (hpp.t0->enable_perr)
pci_bctl |= PCI_BRIDGE_CTL_PARITY;
else
pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
if (dev->subordinate) {
list_for_each_entry(cdev, &dev->subordinate->devices,
bus_list)
program_fw_provided_values(cdev);
}
}
}
int __ref shpchp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
int num, fn;
struct controller *ctrl = p_slot->ctrl;
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (dev) {
ctrl_err(ctrl, "Device %s already exists "
"at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
pci_domain_nr(parent), p_slot->bus, p_slot->device);
pci_dev_put(dev);
return -EINVAL;
}
num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (num == 0) {
ctrl_err(ctrl, "No new device found\n");
return -ENODEV;
}
for (fn = 0; fn < 8; fn++) {
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
if (!dev)
continue;
if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
ctrl_err(ctrl, "Cannot hot-add display device %s\n",
pci_name(dev));
pci_dev_put(dev);
continue;
}
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
/* Find an unused bus number for the new bridge */
struct pci_bus *child;
unsigned char busnr, start = parent->secondary;
unsigned char end = parent->subordinate;
for (busnr = start; busnr <= end; busnr++) {
if (!pci_find_bus(pci_domain_nr(parent),
busnr))
break;
}
if (busnr > end) {
ctrl_err(ctrl,
"No free bus for hot-added bridge\n");
pci_dev_put(dev);
continue;
}
child = pci_add_new_bus(parent, dev, busnr);
if (!child) {
ctrl_err(ctrl, "Cannot add new bus for %s\n",
pci_name(dev));
pci_dev_put(dev);
continue;
}
child->subordinate = pci_do_scan_bus(child);
pci_bus_size_bridges(child);
}
program_fw_provided_values(dev);
pci_dev_put(dev);
}
pci_bus_assign_resources(parent);
pci_bus_add_devices(parent);
pci_enable_bridges(parent);
return 0;
}
int shpchp_unconfigure_device(struct slot *p_slot)
{
int rc = 0;
int j;
u8 bctl = 0;
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
struct controller *ctrl = p_slot->ctrl;
ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
__func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
for (j=0; j<8 ; j++) {
struct pci_dev* temp = pci_get_slot(parent,
(p_slot->device << 3) | j);
if (!temp)
continue;
if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
ctrl_err(ctrl, "Cannot remove display device %s\n",
pci_name(temp));
pci_dev_put(temp);
continue;
}
if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
if (bctl & PCI_BRIDGE_CTL_VGA) {
ctrl_err(ctrl,
"Cannot remove display device %s\n",
pci_name(temp));
pci_dev_put(temp);
continue;
}
}
pci_remove_bus_device(temp);
pci_dev_put(temp);
}
return rc;
}
