/*
* Low-level parallel-support for PC-style hardware integrated in the
* LASI-Controller (on GSC-Bus) for HP-PARISC Workstations
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* (C) 1999-2001 by Helge Deller <deller@gmx.de>
*
*
* based on parport_pc.c by
* Grant Guenther <grant@torque.net>
* Phil Blundell <philb@gnu.org>
* Tim Waugh <tim@cyberelk.demon.co.uk>
* Jose Renau <renau@acm.org>
* David Campbell <campbell@torque.net>
* Andrea Arcangeli
*/
#undef DEBUG /* undef for production */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/sysctl.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/uaccess.h>
#include <asm/superio.h>
#include <linux/parport.h>
#include <asm/pdc.h>
#include <asm/parisc-device.h>
#include <asm/hardware.h>
#include "parport_gsc.h"
MODULE_AUTHOR("Helge Deller <deller@gmx.de>");
MODULE_DESCRIPTION("HP-PARISC PC-style parallel port driver");
MODULE_SUPPORTED_DEVICE("integrated PC-style parallel port");
MODULE_LICENSE("GPL");
/*
* Clear TIMEOUT BIT in EPP MODE
*
* This is also used in SPP detection.
*/
static int clear_epp_timeout(struct parport *pb)
{
unsigned char r;
if (!(parport_gsc_read_status(pb) & 0x01))
return 1;
/* To clear timeout some chips require double read */
parport_gsc_read_status(pb);
r = parport_gsc_read_status(pb);
parport_writeb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
parport_writeb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
r = parport_gsc_read_status(pb);
return !(r & 0x01);
}
/*
* Access functions.
*
* Most of these aren't static because they may be used by the
* parport_xxx_yyy macros. extern __inline__ versions of several
* of these are in parport_gsc.h.
*/
static irqreturn_t parport_gsc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
parport_generic_irq(irq, (struct parport *) dev_id, regs);
return IRQ_HANDLED;
}
void parport_gsc_init_state(struct pardevice *dev, struct parport_state *s)
{
s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
}
void parport_gsc_save_state(struct parport *p, struct parport_state *s)
{
s->u.pc.ctr = parport_readb (CONTROL (p));
}
void parport_gsc_restore_state(struct parport *p, struct parport_state *s)
{
parport_writeb (s->u.pc.ctr, CONTROL (p));
}
struct parport_operations parport_gsc_ops =
{
.write_data = parport_gsc_write_data,
.read_data = parport_gsc_read_data,
.write_control = parport_gsc_write_control,
.read_control = parport_gsc_read_control,
.frob_control = parport_gsc_frob_control,
.read_status = parport_gsc_read_status,
.enable_irq = parport_gsc_enable_irq,
.disable_irq = parport_gsc_disable_irq,
.data_forward = parport_gsc_data_forward,
.data_reverse = parport_gsc_data_reverse,
.init_state = parport_gsc_init_state,
.save_state = parport_gsc_save_state,
.restore_state = parport_gsc_restore_state,
.epp_write_data = parport_ieee1284_epp_write_data,
.epp_read_data = parport_ieee1284_epp_read_data,
.epp_write_addr = parport_ieee1284_epp_write_addr,
.epp_read_addr = parport_ieee1284_epp_read_addr,
.ecp_write_data = parport_ieee1284_ecp_write_data,
.ecp_read_data = parport_ieee1284_ecp_read_data,
.ecp_write_addr = parport_ieee1284_ecp_write_addr,
.compat_write_data = parport_ieee1284_write_compat,
.nibble_read_data = parport_ieee1284_read_nibble,
.byte_read_data = parport_ieee1284_read_byte,
.owner = THIS_MODULE,
};
/* --- Mode detection ------------------------------------- */
/*
* Checks for port existence, all ports support SPP MODE
*/
static int __devinit parport_SPP_supported(struct parport *pb)
{
unsigned char r, w;
/*
* first clear an eventually pending EPP timeout
* I (sailer@ife.ee.ethz.ch) have an SMSC chipset
* that does not even respond to SPP cycles if an EPP
* timeout is pending
*/
clear_epp_timeout(pb);
/* Do a simple read-write test to make sure the port exists. */
w = 0xc;
parport_writeb (w, CONTROL (pb));
/* Is there a control register that we can read from? Some
* ports don't allow reads, so read_control just returns a
* software copy. Some ports _do_ allow reads, so bypass the
* software copy here. In addition, some bits aren't
* writable. */
r = parport_readb (CONTROL (pb));
if ((r & 0xf) == w) {
w = 0xe;
parport_writeb (w, CONTROL (pb));
r = parport_readb (CONTROL (pb));
parport_writeb (0xc, CONTROL (pb));
if ((r & 0xf) == w)
return PARPORT_MODE_PCSPP;
}
/* Try the data register. The data lines aren't tri-stated at
* this stage, so we expect back what we wrote. */
w = 0xaa;
parport_gsc_write_data (pb, w);
r = parport_gsc_read_data (pb);
if (r == w) {
w = 0x55;
parport_gsc_write_data (pb, w);
r = parport_gsc_read_data (pb);
if (r == w)
return PARPORT_MODE_PCSPP;
}
return 0;
}
/* Detect PS/2 support.
*
* Bit 5 (0x20) sets the PS/2 data direction; setting this high
* allows us to read data from the data lines. In theory we would get back
* 0xff but any peripheral attached to the port may drag some or all of the
* lines down to zero. So if we get back anything that isn't the contents
* of the data register we deem PS/2 support to be present.
*
* Some SPP ports have "half PS/2" ability - you can't turn off the line
* drivers, but an external peripheral with sufficiently beefy drivers of
* its own can overpower them and assert its own levels onto the bus, from
* where they can then be read back as normal. Ports with this property
* and the right type of device attached are likely to fail the SPP test,
* (as they will appear to have stuck bits) and so the fact that they might
* be misdetected here is rather academic.
*/
static int __devinit parport_PS2_supported(struct parport *pb)
{
int ok = 0;
clear_epp_timeout(pb);
/* try to tri-state the buffer */
parport_gsc_data_reverse (pb);
parport_gsc_write_data(pb, 0x55);
if (parport_gsc_read_data(pb) != 0x55) ok++;
parport_gsc_write_data(pb, 0xaa);
if (parport_gsc_read_data(pb) != 0xaa) ok++;
/* cancel input mode */
parport_gsc_data_forward (pb);
if (ok) {
pb->modes |= PARPORT_MODE_TRISTATE;
} else {
struct parport_gsc_private *priv = pb->private_data;
priv->ctr_writable &= ~0x20;
}
return ok;
}
/* --- Initialisation code -------------------------------- */
struct parport *__devinit parport_gsc_probe_port (unsigned long base,
unsigned long base_hi,
int irq, int dma,
struct pci_dev *dev)
{
struct parport_gsc_private *priv;
struct parport_operations *ops;
struct parport tmp;
struct parport *p = &tmp;
priv = kmalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
if (!priv) {
printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
return NULL;
}
ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
if (!ops) {
printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
base);
kfree (priv);
return NULL;
}
memcpy (ops, &parport_gsc_ops, sizeof (struct parport_operations));
priv->ctr = 0xc;
priv->ctr_writable = 0xff;
priv->dma_buf = 0;
priv->dma_handle = 0;
priv->dev = dev;
p->base = base;
p->base_hi = base_hi;
p->irq = irq;
p->dma = dma;
p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
p->ops = ops;
p->private_data = priv;
p->physport = p;
if (!parport_SPP_supported (p)) {
/* No port. */
kfree (priv);
return NULL;
}
parport_PS2_supported (p);
if (!(p = parport_register_port(base, PARPORT_IRQ_NONE,
PARPORT_DMA_NONE, ops))) {
kfree (priv);
kfree (ops);
return NULL;
}
p->base_hi = base_hi;
p->modes = tmp.modes;
p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
p->private_data = priv;
printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
p->irq = irq;
if (p->irq == PARPORT_IRQ_AUTO) {
p->irq = PARPORT_IRQ_NONE;
}
if (p->irq != PARPORT_IRQ_NONE) {
printk(", irq %d", p->irq);
if (p->dma == PARPORT_DMA_AUTO) {
p->dma = PARPORT_DMA_NONE;
}
}
if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
is mandatory (see above) */
p->dma = PARPORT_DMA_NONE;
printk(" [");
#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
{
int f = 0;
printmode(PCSPP);
printmode(TRISTATE);
printmode(COMPAT)
printmode(EPP);
// printmode(ECP);
// printmode(DMA);
}
#undef printmode
printk("]\n");
if (p->irq != PARPORT_IRQ_NONE) {
if (request_irq (p->irq, parport_gsc_interrupt,
0, p->name, p)) {
printk (KERN_WARNING "%s: irq %d in use, "
"resorting to polled operation\n",
p->name, p->irq);
p->irq = PARPORT_IRQ_NONE;
p->dma = PARPORT_DMA_NONE;
}
}
/* Done probing. Now put the port into a sensible start-up state. */
parport_gsc_write_data(p, 0);
parport_gsc_data_forward (p);
/* Now that we've told the sharing engine about the port, and
found out its characteristics, let the high-level drivers
know about it. */
parport_announce_port (p);
return p;
}
#define PARPORT_GSC_OFFSET 0x800
static int __initdata parport_count;
static int __devinit parport_init_chip(struct parisc_device *dev)
{
struct parport *p;
unsigned long port;
if (!dev->irq) {
printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n",
dev->hpa.start);
return -ENODEV;
}
port = dev->hpa.start + PARPORT_GSC_OFFSET;
/* some older machines with ASP-chip don't support
* the enhanced parport modes.
*/
if (boot_cpu_data.cpu_type > pcxt && !pdc_add_valid(port+4)) {
/* Initialize bidirectional-mode (0x10) & data-tranfer-mode #1 (0x20) */
printk("%s: initialize bidirectional-mode.\n", __FUNCTION__);
parport_writeb ( (0x10 + 0x20), port + 4);
} else {
printk("%s: enhanced parport-modes not supported.\n", __FUNCTION__);
}
p = parport_gsc_probe_port(port, 0, dev->irq,
/* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL);
if (p)
parport_count++;
dev->dev.driver_data = p;
return 0;
}
static int __devexit parport_remove_chip(struct parisc_device *dev)
{
struct parport *p = dev->dev.driver_data;
if (p) {
struct parport_gsc_private *priv = p->private_data;
struct parport_operations *ops = p->ops;
parport_remove_port(p);
if (p->dma != PARPORT_DMA_NONE)
free_dma(p->dma);
if (p->irq != PARPORT_IRQ_NONE)
free_irq(p->irq, p);
if (priv->dma_buf)
pci_free_consistent(priv->dev, PAGE_SIZE,
priv->dma_buf,
priv->dma_handle);
kfree (p->private_data);
parport_put_port(p);
kfree (ops); /* hope no-one cached it */
}
return 0;
}
static struct parisc_device_id parport_tbl[] = {
{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x74 },
{ 0, }
};
MODULE_DEVICE_TABLE(parisc, parport_tbl);
static struct parisc_driver parport_driver = {
.name = "Parallel",
.id_table = parport_tbl,
.probe = parport_init_chip,
.remove = __devexit_p(parport_remove_chip),
};
int __devinit parport_gsc_init(void)
{
return register_parisc_driver(&parport_driver);
}
static void __devexit parport_gsc_exit(void)
{
unregister_parisc_driver(&parport_driver);
}
module_init(parport_gsc_init);
module_exit(parport_gsc_exit);
