/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <net/net_namespace.h>
#include <linux/netdevice.h>
#include <net/cfg80211.h>
#include <net/mac80211.h>
#include <net/netlink.h>
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-debug.h"
#include "iwl-fh.h"
#include "iwl-io.h"
#include "iwl-agn.h"
#include "iwl-testmode.h"
/* The TLVs used in the gnl message policy between the kernel module and
* user space application. iwl_testmode_gnl_msg_policy is to be carried
* through the NL80211_CMD_TESTMODE channel regulated by nl80211.
* See iwl-testmode.h
*/
static
struct nla_policy iwl_testmode_gnl_msg_policy[IWL_TM_ATTR_MAX] = {
[IWL_TM_ATTR_COMMAND] = { .type = NLA_U32, },
[IWL_TM_ATTR_UCODE_CMD_ID] = { .type = NLA_U8, },
[IWL_TM_ATTR_UCODE_CMD_DATA] = { .type = NLA_UNSPEC, },
[IWL_TM_ATTR_REG_OFFSET] = { .type = NLA_U32, },
[IWL_TM_ATTR_REG_VALUE8] = { .type = NLA_U8, },
[IWL_TM_ATTR_REG_VALUE32] = { .type = NLA_U32, },
[IWL_TM_ATTR_SYNC_RSP] = { .type = NLA_UNSPEC, },
[IWL_TM_ATTR_UCODE_RX_PKT] = { .type = NLA_UNSPEC, },
[IWL_TM_ATTR_EEPROM] = { .type = NLA_UNSPEC, },
[IWL_TM_ATTR_TRACE_ADDR] = { .type = NLA_UNSPEC, },
[IWL_TM_ATTR_TRACE_DATA] = { .type = NLA_UNSPEC, },
[IWL_TM_ATTR_FIXRATE] = { .type = NLA_U32, },
};
/*
* See the struct iwl_rx_packet in iwl-commands.h for the format of the
* received events from the device
*/
static inline int get_event_length(struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
if (pkt)
return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
else
return 0;
}
/*
* This function multicasts the spontaneous messages from the device to the
* user space. It is invoked whenever there is a received messages
* from the device. This function is called within the ISR of the rx handlers
* in iwlagn driver.
*
* The parsing of the message content is left to the user space application,
* The message content is treated as unattacked raw data and is encapsulated
* with IWL_TM_ATTR_UCODE_RX_PKT multicasting to the user space.
*
* @priv: the instance of iwlwifi device
* @rxb: pointer to rx data content received by the ISR
*
* See the message policies and TLVs in iwl_testmode_gnl_msg_policy[].
* For the messages multicasting to the user application, the mandatory
* TLV fields are :
* IWL_TM_ATTR_COMMAND must be IWL_TM_CMD_DEV2APP_UCODE_RX_PKT
* IWL_TM_ATTR_UCODE_RX_PKT for carrying the message content
*/
static void iwl_testmode_ucode_rx_pkt(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct ieee80211_hw *hw = priv->hw;
struct sk_buff *skb;
void *data;
int length;
data = (void *)rxb_addr(rxb);
length = get_event_length(rxb);
if (!data || length == 0)
return;
skb = cfg80211_testmode_alloc_event_skb(hw->wiphy, 20 + length,
GFP_ATOMIC);
if (skb == NULL) {
IWL_DEBUG_INFO(priv,
"Run out of memory for messages to user space ?\n");
return;
}
NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND, IWL_TM_CMD_DEV2APP_UCODE_RX_PKT);
NLA_PUT(skb, IWL_TM_ATTR_UCODE_RX_PKT, length, data);
cfg80211_testmode_event(skb, GFP_ATOMIC);
return;
nla_put_failure:
kfree_skb(skb);
IWL_DEBUG_INFO(priv, "Ouch, overran buffer, check allocation!\n");
}
void iwl_testmode_init(struct iwl_priv *priv)
{
priv->pre_rx_handler = iwl_testmode_ucode_rx_pkt;
priv->testmode_trace.trace_enabled = false;
}
static void iwl_trace_cleanup(struct iwl_priv *priv)
{
struct device *dev = &priv->pci_dev->dev;
if (priv->testmode_trace.trace_enabled) {
if (priv->testmode_trace.cpu_addr &&
priv->testmode_trace.dma_addr)
dma_free_coherent(dev,
TRACE_TOTAL_SIZE,
priv->testmode_trace.cpu_addr,
priv->testmode_trace.dma_addr);
priv->testmode_trace.trace_enabled = false;
priv->testmode_trace.cpu_addr = NULL;
priv->testmode_trace.trace_addr = NULL;
priv->testmode_trace.dma_addr = 0;
}
}
void iwl_testmode_cleanup(struct iwl_priv *priv)
{
iwl_trace_cleanup(priv);
}
/*
* This function handles the user application commands to the ucode.
*
* It retrieves the mandatory fields IWL_TM_ATTR_UCODE_CMD_ID and
* IWL_TM_ATTR_UCODE_CMD_DATA and calls to the handler to send the
* host command to the ucode.
*
* If any mandatory field is missing, -ENOMSG is replied to the user space
* application; otherwise, the actual execution result of the host command to
* ucode is replied.
*
* @hw: ieee80211_hw object that represents the device
* @tb: gnl message fields from the user space
*/
static int iwl_testmode_ucode(struct ieee80211_hw *hw, struct nlattr **tb)
{
struct iwl_priv *priv = hw->priv;
struct iwl_host_cmd cmd;
memset(&cmd, 0, sizeof(struct iwl_host_cmd));
if (!tb[IWL_TM_ATTR_UCODE_CMD_ID] ||
!tb[IWL_TM_ATTR_UCODE_CMD_DATA]) {
IWL_DEBUG_INFO(priv,
"Error finding ucode command mandatory fields\n");
return -ENOMSG;
}
cmd.id = nla_get_u8(tb[IWL_TM_ATTR_UCODE_CMD_ID]);
cmd.data[0] = nla_data(tb[IWL_TM_ATTR_UCODE_CMD_DATA]);
cmd.len[0] = nla_len(tb[IWL_TM_ATTR_UCODE_CMD_DATA]);
cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
IWL_INFO(priv, "testmode ucode command ID 0x%x, flags 0x%x,"
" len %d\n", cmd.id, cmd.flags, cmd.len[0]);
/* ok, let's submit the command to ucode */
return iwl_send_cmd(priv, &cmd);
}
/*
* This function handles the user application commands for register access.
*
* It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
* handlers respectively.
*
* If it's an unknown commdn ID, -ENOSYS is returned; or -ENOMSG if the
* mandatory fields(IWL_TM_ATTR_REG_OFFSET,IWL_TM_ATTR_REG_VALUE32,
* IWL_TM_ATTR_REG_VALUE8) are missing; Otherwise 0 is replied indicating
* the success of the command execution.
*
* If IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_REG_READ32, the register read
* value is returned with IWL_TM_ATTR_REG_VALUE32.
*
* @hw: ieee80211_hw object that represents the device
* @tb: gnl message fields from the user space
*/
static int iwl_testmode_reg(struct ieee80211_hw *hw, struct nlattr **tb)
{
struct iwl_priv *priv = hw->priv;
u32 ofs, val32;
u8 val8;
struct sk_buff *skb;
int status = 0;
if (!tb[IWL_TM_ATTR_REG_OFFSET]) {
IWL_DEBUG_INFO(priv, "Error finding register offset\n");
return -ENOMSG;
}
ofs = nla_get_u32(tb[IWL_TM_ATTR_REG_OFFSET]);
IWL_INFO(priv, "testmode register access command offset 0x%x\n", ofs);
switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
case IWL_TM_CMD_APP2DEV_REG_READ32:
val32 = iwl_read32(priv, ofs);
IWL_INFO(priv, "32bit value to read 0x%x\n", val32);
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20);
if (!skb) {
IWL_DEBUG_INFO(priv, "Error allocating memory\n");
return -ENOMEM;
}
NLA_PUT_U32(skb, IWL_TM_ATTR_REG_VALUE32, val32);
status = cfg80211_testmode_reply(skb);
if (status < 0)
IWL_DEBUG_INFO(priv,
"Error sending msg : %d\n", status);
break;
case IWL_TM_CMD_APP2DEV_REG_WRITE32:
if (!tb[IWL_TM_ATTR_REG_VALUE32]) {
IWL_DEBUG_INFO(priv,
"Error finding value to write\n");
return -ENOMSG;
} else {
val32 = nla_get_u32(tb[IWL_TM_ATTR_REG_VALUE32]);
IWL_INFO(priv, "32bit value to write 0x%x\n", val32);
iwl_write32(priv, ofs, val32);
}
break;
case IWL_TM_CMD_APP2DEV_REG_WRITE8:
if (!tb[IWL_TM_ATTR_REG_VALUE8]) {
IWL_DEBUG_INFO(priv, "Error finding value to write\n");
return -ENOMSG;
} else {
val8 = nla_get_u8(tb[IWL_TM_ATTR_REG_VALUE8]);
IWL_INFO(priv, "8bit value to write 0x%x\n", val8);
iwl_write8(priv, ofs, val8);
}
break;
default:
IWL_DEBUG_INFO(priv, "Unknown testmode register command ID\n");
return -ENOSYS;
}
return status;
nla_put_failure:
kfree_skb(skb);
return -EMSGSIZE;
}
static int iwl_testmode_cfg_init_calib(struct iwl_priv *priv)
{
struct iwl_notification_wait calib_wait;
int ret;
iwlagn_init_notification_wait(priv, &calib_wait,
CALIBRATION_COMPLETE_NOTIFICATION,
NULL, NULL);
ret = iwlagn_init_alive_start(priv);
if (ret) {
IWL_DEBUG_INFO(priv,
"Error configuring init calibration: %d\n", ret);
goto cfg_init_calib_error;
}
ret = iwlagn_wait_notification(priv, &calib_wait, 2 * HZ);
if (ret)
IWL_DEBUG_INFO(priv, "Error detecting"
" CALIBRATION_COMPLETE_NOTIFICATION: %d\n", ret);
return ret;
cfg_init_calib_error:
iwlagn_remove_notification(priv, &calib_wait);
return ret;
}
/*
* This function handles the user application commands for driver.
*
* It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
* handlers respectively.
*
* If it's an unknown commdn ID, -ENOSYS is replied; otherwise, the returned
* value of the actual command execution is replied to the user application.
*
* If there's any message responding to the user space, IWL_TM_ATTR_SYNC_RSP
* is used for carry the message while IWL_TM_ATTR_COMMAND must set to
* IWL_TM_CMD_DEV2APP_SYNC_RSP.
*
* @hw: ieee80211_hw object that represents the device
* @tb: gnl message fields from the user space
*/
static int iwl_testmode_driver(struct ieee80211_hw *hw, struct nlattr **tb)
{
struct iwl_priv *priv = hw->priv;
struct sk_buff *skb;
unsigned char *rsp_data_ptr = NULL;
int status = 0, rsp_data_len = 0;
switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
case IWL_TM_CMD_APP2DEV_GET_DEVICENAME:
rsp_data_ptr = (unsigned char *)priv->cfg->name;
rsp_data_len = strlen(priv->cfg->name);
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
rsp_data_len + 20);
if (!skb) {
IWL_DEBUG_INFO(priv,
"Error allocating memory\n");
return -ENOMEM;
}
NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND,
IWL_TM_CMD_DEV2APP_SYNC_RSP);
NLA_PUT(skb, IWL_TM_ATTR_SYNC_RSP,
rsp_data_len, rsp_data_ptr);
status = cfg80211_testmode_reply(skb);
if (status < 0)
IWL_DEBUG_INFO(priv, "Error sending msg : %d\n",
status);
break;
case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW:
status = iwlagn_load_ucode_wait_alive(priv, &priv->ucode_init,
UCODE_SUBTYPE_INIT, -1);
if (status)
IWL_DEBUG_INFO(priv,
"Error loading init ucode: %d\n", status);
break;
case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB:
iwl_testmode_cfg_init_calib(priv);
iwlagn_stop_device(priv);
break;
case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW:
status = iwlagn_load_ucode_wait_alive(priv,
&priv->ucode_rt,
UCODE_SUBTYPE_REGULAR,
UCODE_SUBTYPE_REGULAR_NEW);
if (status) {
IWL_DEBUG_INFO(priv,
"Error loading runtime ucode: %d\n", status);
break;
}
status = iwl_alive_start(priv);
if (status)
IWL_DEBUG_INFO(priv,
"Error starting the device: %d\n", status);
break;
case IWL_TM_CMD_APP2DEV_GET_EEPROM:
if (priv->eeprom) {
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
priv->cfg->base_params->eeprom_size + 20);
if (!skb) {
IWL_DEBUG_INFO(priv,
"Error allocating memory\n");
return -ENOMEM;
}
NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND,
IWL_TM_CMD_DEV2APP_EEPROM_RSP);
NLA_PUT(skb, IWL_TM_ATTR_EEPROM,
priv->cfg->base_params->eeprom_size,
priv->eeprom);
status = cfg80211_testmode_reply(skb);
if (status < 0)
IWL_DEBUG_INFO(priv,
"Error sending msg : %d\n",
status);
} else
return -EFAULT;
break;
case IWL_TM_CMD_APP2DEV_FIXRATE_REQ:
if (!tb[IWL_TM_ATTR_FIXRATE]) {
IWL_DEBUG_INFO(priv,
"Error finding fixrate setting\n");
return -ENOMSG;
}
priv->dbg_fixed_rate = nla_get_u32(tb[IWL_TM_ATTR_FIXRATE]);
break;
default:
IWL_DEBUG_INFO(priv, "Unknown testmode driver command ID\n");
return -ENOSYS;
}
return status;
nla_put_failure:
kfree_skb(skb);
return -EMSGSIZE;
}
/*
* This function handles the user application commands for uCode trace
*
* It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
* handlers respectively.
*
* If it's an unknown commdn ID, -ENOSYS is replied; otherwise, the returned
* value of the actual command execution is replied to the user application.
*
* @hw: ieee80211_hw object that represents the device
* @tb: gnl message fields from the user space
*/
static int iwl_testmode_trace(struct ieee80211_hw *hw, struct nlattr **tb)
{
struct iwl_priv *priv = hw->priv;
struct sk_buff *skb;
int status = 0;
struct device *dev = &priv->pci_dev->dev;
switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
case IWL_TM_CMD_APP2DEV_BEGIN_TRACE:
if (priv->testmode_trace.trace_enabled)
return -EBUSY;
priv->testmode_trace.cpu_addr =
dma_alloc_coherent(dev,
TRACE_TOTAL_SIZE,
&priv->testmode_trace.dma_addr,
GFP_KERNEL);
if (!priv->testmode_trace.cpu_addr)
return -ENOMEM;
priv->testmode_trace.trace_enabled = true;
priv->testmode_trace.trace_addr = (u8 *)PTR_ALIGN(
priv->testmode_trace.cpu_addr, 0x100);
memset(priv->testmode_trace.trace_addr, 0x03B,
TRACE_BUFF_SIZE);
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
sizeof(priv->testmode_trace.dma_addr) + 20);
if (!skb) {
IWL_DEBUG_INFO(priv,
"Error allocating memory\n");
iwl_trace_cleanup(priv);
return -ENOMEM;
}
NLA_PUT(skb, IWL_TM_ATTR_TRACE_ADDR,
sizeof(priv->testmode_trace.dma_addr),
(u64 *)&priv->testmode_trace.dma_addr);
status = cfg80211_testmode_reply(skb);
if (status < 0) {
IWL_DEBUG_INFO(priv,
"Error sending msg : %d\n",
status);
}
break;
case IWL_TM_CMD_APP2DEV_END_TRACE:
iwl_trace_cleanup(priv);
break;
case IWL_TM_CMD_APP2DEV_READ_TRACE:
if (priv->testmode_trace.trace_enabled &&
priv->testmode_trace.trace_addr) {
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
20 + TRACE_BUFF_SIZE);
if (skb == NULL) {
IWL_DEBUG_INFO(priv,
"Error allocating memory\n");
return -ENOMEM;
}
NLA_PUT(skb, IWL_TM_ATTR_TRACE_DATA,
TRACE_BUFF_SIZE,
priv->testmode_trace.trace_addr);
status = cfg80211_testmode_reply(skb);
if (status < 0) {
IWL_DEBUG_INFO(priv,
"Error sending msg : %d\n", status);
}
} else
return -EFAULT;
break;
default:
IWL_DEBUG_INFO(priv, "Unknown testmode mem command ID\n");
return -ENOSYS;
}
return status;
nla_put_failure:
kfree_skb(skb);
if (nla_get_u32(tb[IWL_TM_ATTR_COMMAND]) ==
IWL_TM_CMD_APP2DEV_BEGIN_TRACE)
iwl_trace_cleanup(priv);
return -EMSGSIZE;
}
/* The testmode gnl message handler that takes the gnl message from the
* user space and parses it per the policy iwl_testmode_gnl_msg_policy, then
* invoke the corresponding handlers.
*
* This function is invoked when there is user space application sending
* gnl message through the testmode tunnel NL80211_CMD_TESTMODE regulated
* by nl80211.
*
* It retrieves the mandatory field, IWL_TM_ATTR_COMMAND, before
* dispatching it to the corresponding handler.
*
* If IWL_TM_ATTR_COMMAND is missing, -ENOMSG is replied to user application;
* -ENOSYS is replied to the user application if the command is unknown;
* Otherwise, the command is dispatched to the respective handler.
*
* @hw: ieee80211_hw object that represents the device
* @data: pointer to user space message
* @len: length in byte of @data
*/
int iwl_testmode_cmd(struct ieee80211_hw *hw, void *data, int len)
{
struct nlattr *tb[IWL_TM_ATTR_MAX - 1];
struct iwl_priv *priv = hw->priv;
int result;
result = nla_parse(tb, IWL_TM_ATTR_MAX - 1, data, len,
iwl_testmode_gnl_msg_policy);
if (result != 0) {
IWL_DEBUG_INFO(priv,
"Error parsing the gnl message : %d\n", result);
return result;
}
/* IWL_TM_ATTR_COMMAND is absolutely mandatory */
if (!tb[IWL_TM_ATTR_COMMAND]) {
IWL_DEBUG_INFO(priv, "Error finding testmode command type\n");
return -ENOMSG;
}
/* in case multiple accesses to the device happens */
mutex_lock(&priv->mutex);
switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
case IWL_TM_CMD_APP2DEV_UCODE:
IWL_DEBUG_INFO(priv, "testmode cmd to uCode\n");
result = iwl_testmode_ucode(hw, tb);
break;
case IWL_TM_CMD_APP2DEV_REG_READ32:
case IWL_TM_CMD_APP2DEV_REG_WRITE32:
case IWL_TM_CMD_APP2DEV_REG_WRITE8:
IWL_DEBUG_INFO(priv, "testmode cmd to register\n");
result = iwl_testmode_reg(hw, tb);
break;
case IWL_TM_CMD_APP2DEV_GET_DEVICENAME:
case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW:
case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB:
case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW:
case IWL_TM_CMD_APP2DEV_GET_EEPROM:
case IWL_TM_CMD_APP2DEV_FIXRATE_REQ:
IWL_DEBUG_INFO(priv, "testmode cmd to driver\n");
result = iwl_testmode_driver(hw, tb);
break;
case IWL_TM_CMD_APP2DEV_BEGIN_TRACE:
case IWL_TM_CMD_APP2DEV_END_TRACE:
case IWL_TM_CMD_APP2DEV_READ_TRACE:
IWL_DEBUG_INFO(priv, "testmode uCode trace cmd to driver\n");
result = iwl_testmode_trace(hw, tb);
break;
default:
IWL_DEBUG_INFO(priv, "Unknown testmode command\n");
result = -ENOSYS;
break;
}
mutex_unlock(&priv->mutex);
return result;
}
