blob: 99310c033253372b1cfd4ed2cf2bed5352cb7321 (
plain) (
tree)
|
|
config IWLWIFI
tristate "Intel Wireless Wifi"
depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
select LIB80211
select FW_LOADER
select MAC80211_LEDS if IWLWIFI_LEDS
select LEDS_CLASS if IWLWIFI_LEDS
config IWLWIFI_LEDS
bool "Enable LED support in iwlagn and iwl3945 drivers"
depends on IWLWIFI
default y
---help---
Select this if you want LED support.
config IWLWIFI_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwlagn driver"
depends on IWLWIFI
---help---
This option will enable spectrum measurement for the iwlagn driver.
config IWLWIFI_DEBUG
bool "Enable full debugging output in iwlagn and iwl3945 drivers"
depends on IWLWIFI
---help---
This option will enable debug tracing output for the iwlwifi drivers
This will result in the kernel module being ~100k larger. You can
control which debug output is sent to the kernel log by setting the
value in
/sys/class/net/wlan0/device/debug_level
This entry will only exist if this option is enabled.
To set a value, simply echo an 8-byte hex value to the same file:
% echo 0x43fff > /sys/class/net/wlan0/device/debug_level
You can find the list of debug mask values in:
drivers/net/wireless/iwlwifi/iwl-debug.h
If this is your first time using this driver, you should say Y here
as the debug information can assist others in helping you resolve
any problems you may encounter.
config IWLWIFI_DEBUGFS
bool "iwlagn debugfs support"
depends on IWLWIFI && IWLWIFI_DEBUG && MAC80211_DEBUGFS
---help---
Enable creation of debugfs files for the iwlwifi drivers.
config IWLAGN
tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
depends on IWLWIFI
---help---
Select to build the driver supporting the:
Intel Wireless WiFi Link Next-Gen AGN
This driver uses the kernel's mac80211 subsystem.
In order to use this driver, you will need a microcode (uCode)
image for it. You can obtain the microcode from:
<http://intellinuxwireless.org/>.
The microcode is typically installed in /lib/firmware. You can
look in the hotplug script /etc/hotplug/firmware.agent to
determine which directory FIRMWARE_DIR is set to when the script
runs.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwlagn.
config IWL4965
bool "Intel Wireless WiFi 4965AGN"
depends on IWLAGN
---help---
This option enables support for Intel Wireless WiFi Link 4965AGN
config IWL5000
bool "Intel Wireless WiFi 5000AGN; Intel WiFi Link 1000, 6000, and 6050 Series"
depends on IWLAGN
---help---
This option enables support for Intel Wireless WiFi Link 5000AGN Family
config IWL3945
tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
depends on IWLWIFI
---help---
Select to build the driver supporting the:
Intel PRO/Wireless 3945ABG/BG Network Connection
This driver uses the kernel's mac80211 subsystem.
In order to use this driver, you will need a microcode (uCode)
image for it. You can obtain the microcode from:
<http://intellinuxwireless.org/>.
The microcode is typically installed in /lib/firmware. You can
look in the hotplug script /etc/hotplug/firmware.agent to
determine which directory FIRMWARE_DIR is set to when the script
runs.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl3945.
config IWL3945_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwl3945 driver"
depends on IWL3945
---help---
This option will enable spectrum measurement for the iwl3945 driver.
|
