/*======================================================================
A PCMCIA ethernet driver for SMC91c92-based cards.
This driver supports Megahertz PCMCIA ethernet cards; and
Megahertz, Motorola, Ositech, and Psion Dacom ethernet/modem
multifunction cards.
Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
smc91c92_cs.c 1.122 2002/10/25 06:26:39
This driver contains code written by Donald Becker
(becker@scyld.com), Rowan Hughes (x-csrdh@jcu.edu.au),
David Hinds (dahinds@users.sourceforge.net), and Erik Stahlman
(erik@vt.edu). Donald wrote the SMC 91c92 code using parts of
Erik's SMC 91c94 driver. Rowan wrote a similar driver, and I've
incorporated some parts of his driver here. I (Dave) wrote most
of the PCMCIA glue code, and the Ositech support code. Kelly
Stephens (kstephen@holli.com) added support for the Motorola
Mariner, with help from Allen Brost.
This software may be used and distributed according to the terms of
the GNU General Public License, incorporated herein by reference.
======================================================================*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/crc32.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/jiffies.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/uaccess.h>
/* Ositech Seven of Diamonds firmware */
#include "ositech.h"
/*====================================================================*/
static char *if_names[] = { "auto", "10baseT", "10base2"};
/* Module parameters */
MODULE_DESCRIPTION("SMC 91c92 series PCMCIA ethernet driver");
MODULE_LICENSE("GPL");
#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
/*
Transceiver/media type.
0 = auto
1 = 10baseT (and autoselect if #define AUTOSELECT),
2 = AUI/10base2,
*/
INT_MODULE_PARM(if_port, 0);
#ifdef PCMCIA_DEBUG
INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
static const char *version =
"smc91c92_cs.c 0.09 1996/8/4 Donald Becker, becker@scyld.com.\n";
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
#else
#define DEBUG(n, args...)
#endif
#define DRV_NAME "smc91c92_cs"
#define DRV_VERSION "1.122"
/*====================================================================*/
/* Operational parameter that usually are not changed. */
/* Time in jiffies before concluding Tx hung */
#define TX_TIMEOUT ((400*HZ)/1000)
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
#define INTR_WORK 4
/* Times to check the check the chip before concluding that it doesn't
currently have room for another Tx packet. */
#define MEMORY_WAIT_TIME 8
static dev_info_t dev_info = "smc91c92_cs";
static dev_link_t *dev_list;
struct smc_private {
dev_link_t link;
spinlock_t lock;
u_short manfid;
u_short cardid;
struct net_device_stats stats;
dev_node_t node;
struct sk_buff *saved_skb;
int packets_waiting;
void __iomem *base;
u_short cfg;
struct timer_list media;
int watchdog, tx_err;
u_short media_status;
u_short fast_poll;
u_short link_status;
struct mii_if_info mii_if;
int duplex;
int rx_ovrn;
};
struct smc_cfg_mem {
tuple_t tuple;
cisparse_t parse;
u_char buf[255];
};
/* Special definitions for Megahertz multifunction cards */
#define MEGAHERTZ_ISR 0x0380
/* Special function registers for Motorola Mariner */
#define MOT_LAN 0x0000
#define MOT_UART 0x0020
#define MOT_EEPROM 0x20
#define MOT_NORMAL \
(COR_LEVEL_REQ | COR_FUNC_ENA | COR_ADDR_DECODE | COR_IREQ_ENA)
/* Special function registers for Ositech cards */
#define OSITECH_AUI_CTL 0x0c
#define OSITECH_PWRDOWN 0x0d
#define OSITECH_RESET 0x0e
#define OSITECH_ISR 0x0f
#define OSITECH_AUI_PWR 0x0c
#define OSITECH_RESET_ISR 0x0e
#define OSI_AUI_PWR 0x40
#define OSI_LAN_PWRDOWN 0x02
#define OSI_MODEM_PWRDOWN 0x01
#define OSI_LAN_RESET 0x02
#define OSI_MODEM_RESET 0x01
/* Symbolic constants for the SMC91c9* series chips, from Erik Stahlman. */
#define BANK_SELECT 14 /* Window select register. */
#define SMC_SELECT_BANK(x) { outw(x, ioaddr + BANK_SELECT); }
/* Bank 0 registers. */
#define TCR 0 /* transmit control register */
#define TCR_CLEAR 0 /* do NOTHING */
#define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */
#define TCR_PAD_EN 0x0080 /* pads short packets to 64 bytes */
#define TCR_MONCSN 0x0400 /* Monitor Carrier. */
#define TCR_FDUPLX 0x0800 /* Full duplex mode. */
#define TCR_NORMAL TCR_ENABLE | TCR_PAD_EN
#define EPH 2 /* Ethernet Protocol Handler report. */
#define EPH_TX_SUC 0x0001
#define EPH_SNGLCOL 0x0002
#define EPH_MULCOL 0x0004
#define EPH_LTX_MULT 0x0008
#define EPH_16COL 0x0010
#define EPH_SQET 0x0020
#define EPH_LTX_BRD 0x0040
#define EPH_TX_DEFR 0x0080
#define EPH_LAT_COL 0x0200
#define EPH_LOST_CAR 0x0400
#define EPH_EXC_DEF 0x0800
#define EPH_CTR_ROL 0x1000
#define EPH_RX_OVRN 0x2000
#define EPH_LINK_OK 0x4000
#define EPH_TX_UNRN 0x8000
#define MEMINFO 8 /* Memory Information Register */
#define MEMCFG 10 /* Memory Configuration Register */
/* Bank 1 registers. */
#define CONFIG 0
#define CFG_MII_SELECT 0x8000 /* 91C100 only */
#define CFG_NO_WAIT 0x1000
#define CFG_FULL_STEP 0x0400
#define CFG_SET_SQLCH 0x0200
#define CFG_AUI_SELECT 0x0100
#define CFG_16BIT 0x0080
#define CFG_DIS_LINK 0x0040
#define CFG_STATIC 0x0030
#define CFG_IRQ_SEL_1 0x0004
#define CFG_IRQ_SEL_0 0x0002
#define BASE_ADDR 2
#define ADDR0 4
#define GENERAL 10
#define CONTROL 12
#define CTL_STORE 0x0001
#define CTL_RELOAD 0x0002
#define CTL_EE_SELECT 0x0004
#define CTL_TE_ENABLE 0x0020
#define CTL_CR_ENABLE 0x0040
#define CTL_LE_ENABLE 0x0080
#define CTL_AUTO_RELEASE 0x0800
#define CTL_POWERDOWN 0x2000
/* Bank 2 registers. */
#define MMU_CMD 0
#define MC_ALLOC 0x20 /* or with number of 256 byte packets */
#define MC_RESET 0x40
#define MC_RELEASE 0x80 /* remove and release the current rx packet */
#define MC_FREEPKT 0xA0 /* Release packet in PNR register */
#define MC_ENQUEUE 0xC0 /* Enqueue the packet for transmit */
#define PNR_ARR 2
#define FIFO_PORTS 4
#define FP_RXEMPTY 0x8000
#define POINTER 6
#define PTR_AUTO_INC 0x0040
#define PTR_READ 0x2000
#define PTR_AUTOINC 0x4000
#define PTR_RCV 0x8000
#define DATA_1 8
#define INTERRUPT 12
#define IM_RCV_INT 0x1
#define IM_TX_INT 0x2
#define IM_TX_EMPTY_INT 0x4
#define IM_ALLOC_INT 0x8
#define IM_RX_OVRN_INT 0x10
#define IM_EPH_INT 0x20
#define RCR 4
enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002,
RxEnable = 0x0100, RxStripCRC = 0x0200};
#define RCR_SOFTRESET 0x8000 /* resets the chip */
#define RCR_STRIP_CRC 0x200 /* strips CRC */
#define RCR_ENABLE 0x100 /* IFF this is set, we can receive packets */
#define RCR_ALMUL 0x4 /* receive all multicast packets */
#define RCR_PROMISC 0x2 /* enable promiscuous mode */
/* the normal settings for the RCR register : */
#define RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE)
#define RCR_CLEAR 0x0 /* set it to a base state */
#define COUNTER 6
/* BANK 3 -- not the same values as in smc9194! */
#define MULTICAST0 0
#define MULTICAST2 2
#define MULTICAST4 4
#define MULTICAST6 6
#define MGMT 8
#define REVISION 0x0a
/* Transmit status bits. */
#define TS_SUCCESS 0x0001
#define TS_16COL 0x0010
#define TS_LATCOL 0x0200
#define TS_LOSTCAR 0x0400
/* Receive status bits. */
#define RS_ALGNERR 0x8000
#define RS_BADCRC 0x2000
#define RS_ODDFRAME 0x1000
#define RS_TOOLONG 0x0800
#define RS_TOOSHORT 0x0400
#define RS_MULTICAST 0x0001
#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
#define set_bits(v, p) outw(inw(p)|(v), (p))
#define mask_bits(v, p) outw(inw(p)&(v), (p))
/*====================================================================*/
static dev_link_t *smc91c92_attach(void);
static void smc91c92_detach(dev_link_t *);
static void smc91c92_config(dev_link_t *link);
static void smc91c92_release(dev_link_t *link);
static int smc91c92_event(event_t event, int priority,
event_callback_args_t *args);
static int smc_open(struct net_device *dev);
static int smc_close(struct net_device *dev);
static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static void smc_tx_timeout(struct net_device *dev);
static int smc_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static void smc_rx(struct net_device *dev);
static struct net_device_stats *smc_get_stats(struct net_device *dev);
static void set_rx_mode(struct net_device *dev);
static int s9k_config(struct net_device *dev, struct ifmap *map);
static void smc_set_xcvr(struct net_device *dev, int if_port);
static void smc_reset(struct net_device *dev);
static void media_check(u_long arg);
static void mdio_sync(kio_addr_t addr);
static int mdio_read(struct net_device *dev, int phy_id, int loc);
static void mdio_write(struct net_device *dev, int phy_id, int loc, int value);
static int smc_link_ok(struct net_device *dev);
static struct ethtool_ops ethtool_ops;
/*======================================================================
smc91c92_attach() creates an "instance" of the driver, allocating
local data structures for one device. The device is registered
with Card Services.
======================================================================*/
static dev_link_t *smc91c92_attach(void)
{
client_reg_t client_reg;
struct smc_private *smc;
dev_link_t *link;
struct net_device *dev;
int ret;
DEBUG(0, "smc91c92_attach()\n");
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(struct smc_private));
if (!dev)
return NULL;
smc = netdev_priv(dev);
link = &smc->link;
link->priv = dev;
spin_lock_init(&smc->lock);
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 4;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = &smc_interrupt;
link->irq.Instance = dev;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
/* The SMC91c92-specific entries in the device structure. */
SET_MODULE_OWNER(dev);
dev->hard_start_xmit = &smc_start_xmit;
dev->get_stats = &smc_get_stats;
dev->set_config = &s9k_config;
dev->set_multicast_list = &set_rx_mode;
dev->open = &smc_open;
dev->stop = &smc_close;
dev->do_ioctl = &smc_ioctl;
SET_ETHTOOL_OPS(dev, ðtool_ops);
#ifdef HAVE_TX_TIMEOUT
dev->tx_timeout = smc_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
#endif
smc->mii_if.dev = dev;
smc->mii_if.mdio_read = mdio_read;
smc->mii_if.mdio_write = mdio_write;
smc->mii_if.phy_id_mask = 0x1f;
smc->mii_if.reg_num_mask = 0x1f;
/* Register with Card Services */
link->next = dev_list;
dev_list = link;
client_reg.dev_info = &dev_info;
client_reg.Version = 0x0210;
client_reg.event_callback_args.client_data = link;
ret = pcmcia_register_client(&link->handle, &client_reg);
if (ret != 0) {
cs_error(link->handle, RegisterClient, ret);
smc91c92_detach(link);
return NULL;
}
return link;
} /* smc91c92_attach */
/*======================================================================
This deletes a driver "instance". The device is de-registered
with Card Services. If it has been released, all local data
structures are freed. Otherwise, the structures will be freed
when the device is released.
======================================================================*/
static void smc91c92_detach(dev_link_t *link)
{
struct net_device *dev = link->priv;
dev_link_t **linkp;
DEBUG(0, "smc91c92_detach(0x%p)\n", link);
/* Locate device structure */
for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
if (*linkp == link) break;
if (*linkp == NULL)
return;
if (link->dev)
unregister_netdev(dev);
if (link->state & DEV_CONFIG)
smc91c92_release(link);
if (link->handle)
pcmcia_deregister_client(link->handle);
/* Unlink device structure, free bits */
*linkp = link->next;
free_netdev(dev);
} /* smc91c92_detach */
/*====================================================================*/
static int cvt_ascii_address(struct net_device *dev, char *s)
{
int i, j, da, c;
if (strlen(s) != 12)
return -1;
for (i = 0; i < 6; i++) {
da = 0;
for (j = 0; j < 2; j++) {
c = *s++;
da <<= 4;
da += ((c >= '0') && (c <= '9')) ?
(c - '0') : ((c & 0x0f) + 9);
}
dev->dev_addr[i] = da;
}
return 0;
}
/*====================================================================*/
static int first_tuple(client_handle_t handle, tuple_t *tuple,
cisparse_t *parse)
{
int i;
if ((i = pcmcia_get_first_tuple(handle, tuple)) != CS_SUCCESS ||
(i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
return i;
return pcmcia_parse_tuple(handle, tuple, parse);
}
static int next_tuple(client_handle_t handle, tuple_t *tuple,
cisparse_t *parse)
{
int i;
if ((i = pcmcia_get_next_tuple(handle, tuple)) != CS_SUCCESS ||
(i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
return i;
return pcmcia_parse_tuple(handle, tuple, parse);
}
/*======================================================================
Configuration stuff for Megahertz cards
mhz_3288_power() is used to power up a 3288's ethernet chip.
mhz_mfc_config() handles socket setup for multifunction (1144
and 3288) cards. mhz_setup() gets a card's hardware ethernet
address.
======================================================================*/
static int mhz_3288_power(dev_link_t *link)
{
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
u_char tmp;
/* Read the ISR twice... */
readb(smc->base+MEGAHERTZ_ISR);
udelay(5);
readb(smc->base+MEGAHERTZ_ISR);
/* Pause 200ms... */
mdelay(200);
/* Now read and write the COR... */
tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR);
udelay(5);
writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR);
return 0;
}
static int mhz_mfc_config(dev_link_t *link)
{
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
struct smc_cfg_mem *cfg_mem;
tuple_t *tuple;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
u_char *buf;
win_req_t req;
memreq_t mem;
int i, k;
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return CS_OUT_OF_RESOURCE;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
link->io.IOAddrLines = 16;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts2 = 8;
tuple->Attributes = tuple->TupleOffset = 0;
tuple->TupleData = (cisdata_t *)buf;
tuple->TupleDataMax = 255;
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(link->handle, tuple, parse);
/* The Megahertz combo cards have modem-like CIS entries, so
we have to explicitly try a bunch of port combinations. */
while (i == CS_SUCCESS) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort2 = cf->io.win[0].base;
for (k = 0; k < 0x400; k += 0x10) {
if (k & 0x80) continue;
link->io.BasePort1 = k ^ 0x300;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS) break;
}
if (i == CS_SUCCESS) break;
i = next_tuple(link->handle, tuple, parse);
}
if (i != CS_SUCCESS)
goto free_cfg_mem;
dev->base_addr = link->io.BasePort1;
/* Allocate a memory window, for accessing the ISR */
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
req.Base = req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link->handle, &req, &link->win);
if (i != CS_SUCCESS)
goto free_cfg_mem;
smc->base = ioremap(req.Base, req.Size);
mem.CardOffset = mem.Page = 0;
if (smc->manfid == MANFID_MOTOROLA)
mem.CardOffset = link->conf.ConfigBase;
i = pcmcia_map_mem_page(link->win, &mem);
if ((i == CS_SUCCESS)
&& (smc->manfid == MANFID_MEGAHERTZ)
&& (smc->cardid == PRODID_MEGAHERTZ_EM3288))
mhz_3288_power(link);
free_cfg_mem:
kfree(cfg_mem);
return i;
}
static int mhz_setup(dev_link_t *link)
{
client_handle_t handle = link->handle;
struct net_device *dev = link->priv;
struct smc_cfg_mem *cfg_mem;
tuple_t *tuple;
cisparse_t *parse;
u_char *buf, *station_addr;
int rc;
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return -1;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
buf = cfg_mem->buf;
tuple->Attributes = tuple->TupleOffset = 0;
tuple->TupleData = (cisdata_t *)buf;
tuple->TupleDataMax = 255;
/* Read the station address from the CIS. It is stored as the last
(fourth) string in the Version 1 Version/ID tuple. */
tuple->DesiredTuple = CISTPL_VERS_1;
if (first_tuple(handle, tuple, parse) != CS_SUCCESS) {
rc = -1;
goto free_cfg_mem;
}
/* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
if (next_tuple(handle, tuple, parse) != CS_SUCCESS)
first_tuple(handle, tuple, parse);
if (parse->version_1.ns > 3) {
station_addr = parse->version_1.str + parse->version_1.ofs[3];
if (cvt_ascii_address(dev, station_addr) == 0) {
rc = 0;
goto free_cfg_mem;
}
}
/* Another possibility: for the EM3288, in a special tuple */
tuple->DesiredTuple = 0x81;
if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS) {
rc = -1;
goto free_cfg_mem;
}
if (pcmcia_get_tuple_data(handle, tuple) != CS_SUCCESS) {
rc = -1;
goto free_cfg_mem;
}
buf[12] = '\0';
if (cvt_ascii_address(dev, buf) == 0) {
rc = 0;
goto free_cfg_mem;
}
rc = -1;
free_cfg_mem:
kfree(cfg_mem);
return rc;
}
/*======================================================================
Configuration stuff for the Motorola Mariner
mot_config() writes directly to the Mariner configuration
registers because the CIS is just bogus.
======================================================================*/
static void mot_config(dev_link_t *link)
{
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
kio_addr_t iouart = link->io.BasePort2;
/* Set UART base address and force map with COR bit 1 */
writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0);
writeb((iouart >> 8) & 0xff, smc->base + MOT_UART + CISREG_IOBASE_1);
writeb(MOT_NORMAL, smc->base + MOT_UART + CISREG_COR);
/* Set SMC base address and force map with COR bit 1 */
writeb(ioaddr & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_0);
writeb((ioaddr >> 8) & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_1);
writeb(MOT_NORMAL, smc->base + MOT_LAN + CISREG_COR);
/* Wait for things to settle down */
mdelay(100);
}
static int mot_setup(dev_link_t *link)
{
struct net_device *dev = link->priv;
kio_addr_t ioaddr = dev->base_addr;
int i, wait, loop;
u_int addr;
/* Read Ethernet address from Serial EEPROM */
for (i = 0; i < 3; i++) {
SMC_SELECT_BANK(2);
outw(MOT_EEPROM + i, ioaddr + POINTER);
SMC_SELECT_BANK(1);
outw((CTL_RELOAD | CTL_EE_SELECT), ioaddr + CONTROL);
for (loop = wait = 0; loop < 200; loop++) {
udelay(10);
wait = ((CTL_RELOAD | CTL_STORE) & inw(ioaddr + CONTROL));
if (wait == 0) break;
}
if (wait)
return -1;
addr = inw(ioaddr + GENERAL);
dev->dev_addr[2*i] = addr & 0xff;
dev->dev_addr[2*i+1] = (addr >> 8) & 0xff;
}
return 0;
}
/*====================================================================*/
static int smc_config(dev_link_t *link)
{
struct net_device *dev = link->priv;
struct smc_cfg_mem *cfg_mem;
tuple_t *tuple;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
u_char *buf;
int i;
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return CS_OUT_OF_RESOURCE;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
tuple->Attributes = tuple->TupleOffset = 0;
tuple->TupleData = (cisdata_t *)buf;
tuple->TupleDataMax = 255;
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
link->io.NumPorts1 = 16;
i = first_tuple(link->handle, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if (i == CS_SUCCESS) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS) break;
}
i = next_tuple(link->handle, tuple, parse);
}
if (i == CS_SUCCESS)
dev->base_addr = link->io.BasePort1;
kfree(cfg_mem);
return i;
}
static int smc_setup(dev_link_t *link)
{
client_handle_t handle = link->handle;
struct net_device *dev = link->priv;
struct smc_cfg_mem *cfg_mem;
tuple_t *tuple;
cisparse_t *parse;
cistpl_lan_node_id_t *node_id;
u_char *buf, *station_addr;
int i, rc;
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return CS_OUT_OF_RESOURCE;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
buf = cfg_mem->buf;
tuple->Attributes = tuple->TupleOffset = 0;
tuple->TupleData = (cisdata_t *)buf;
tuple->TupleDataMax = 255;
/* Check for a LAN function extension tuple */
tuple->DesiredTuple = CISTPL_FUNCE;
i = first_tuple(handle, tuple, parse);
while (i == CS_SUCCESS) {
if (parse->funce.type == CISTPL_FUNCE_LAN_NODE_ID)
break;
i = next_tuple(handle, tuple, parse);
}
if (i == CS_SUCCESS) {
node_id = (cistpl_lan_node_id_t *)parse->funce.data;
if (node_id->nb == 6) {
for (i = 0; i < 6; i++)
dev->dev_addr[i] = node_id->id[i];
rc = 0;
goto free_cfg_mem;
}
}
/* Try the third string in the Version 1 Version/ID tuple. */
tuple->DesiredTuple = CISTPL_VERS_1;
if (first_tuple(handle, tuple, parse) != CS_SUCCESS) {
rc = -1;
goto free_cfg_mem;
}
station_addr = parse->version_1.str + parse->version_1.ofs[2];
if (cvt_ascii_address(dev, station_addr) == 0) {
rc = 0;
goto free_cfg_mem;
}
rc = -1;
free_cfg_mem:
kfree(cfg_mem);
return rc;
}
/*====================================================================*/
static int osi_config(dev_link_t *link)
{
struct net_device *dev = link->priv;
static kio_addr_t com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
int i, j;
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
link->io.NumPorts1 = 64;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts2 = 8;
link->io.IOAddrLines = 16;
/* Enable Hard Decode, LAN, Modem */
link->conf.ConfigIndex = 0x23;
for (i = j = 0; j < 4; j++) {
link->io.BasePort2 = com[j];
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS) break;
}
if (i != CS_SUCCESS) {
/* Fallback: turn off hard decode */
link->conf.ConfigIndex = 0x03;
link->io.NumPorts2 = 0;
i = pcmcia_request_io(link->handle, &link->io);
}
dev->base_addr = link->io.BasePort1 + 0x10;
return i;
}
static int osi_setup(dev_link_t *link, u_short manfid, u_short cardid)
{
client_handle_t handle = link->handle;
struct net_device *dev = link->priv;
struct smc_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
int i, rc;
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return -1;
tuple = &cfg_mem->tuple;
buf = cfg_mem->buf;
tuple->Attributes = TUPLE_RETURN_COMMON;
tuple->TupleData = (cisdata_t *)buf;
tuple->TupleDataMax = 255;
tuple->TupleOffset = 0;
/* Read the station address from tuple 0x90, subtuple 0x04 */
tuple->DesiredTuple = 0x90;
i = pcmcia_get_first_tuple(handle, tuple);
while (i == CS_SUCCESS) {
i = pcmcia_get_tuple_data(handle, tuple);
if ((i != CS_SUCCESS) || (buf[0] == 0x04))
break;
i = pcmcia_get_next_tuple(handle, tuple);
}
if (i != CS_SUCCESS) {
rc = -1;
goto free_cfg_mem;
}
for (i = 0; i < 6; i++)
dev->dev_addr[i] = buf[i+2];
if (((manfid == MANFID_OSITECH) &&
(cardid == PRODID_OSITECH_SEVEN)) ||
((manfid == MANFID_PSION) &&
(cardid == PRODID_PSION_NET100))) {
/* Download the Seven of Diamonds firmware */
for (i = 0; i < sizeof(__Xilinx7OD); i++) {
outb(__Xilinx7OD[i], link->io.BasePort1+2);
udelay(50);
}
} else if (manfid == MANFID_OSITECH) {
/* Make sure both functions are powered up */
set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
/* Now, turn on the interrupt for both card functions */
set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
DEBUG(2, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
inw(link->io.BasePort1 + OSITECH_AUI_PWR),
inw(link->io.BasePort1 + OSITECH_RESET_ISR));
}
rc = 0;
free_cfg_mem:
kfree(cfg_mem);
return rc;
}
/*======================================================================
This verifies that the chip is some SMC91cXX variant, and returns
the revision code if successful. Otherwise, it returns -ENODEV.
======================================================================*/
static int check_sig(dev_link_t *link)
{
struct net_device *dev = link->priv;
kio_addr_t ioaddr = dev->base_addr;
int width;
u_short s;
SMC_SELECT_BANK(1);
if (inw(ioaddr + BANK_SELECT) >> 8 != 0x33) {
/* Try powering up the chip */
outw(0, ioaddr + CONTROL);
mdelay(55);
}
/* Try setting bus width */
width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO);
s = inb(ioaddr + CONFIG);
if (width)
s |= CFG_16BIT;
else
s &= ~CFG_16BIT;
outb(s, ioaddr + CONFIG);
/* Check Base Address Register to make sure bus width is OK */
s = inw(ioaddr + BASE_ADDR);
if ((inw(ioaddr + BANK_SELECT) >> 8 == 0x33) &&
((s >> 8) != (s & 0xff))) {
SMC_SELECT_BANK(3);
s = inw(ioaddr + REVISION);
return (s & 0xff);
}
if (width) {
event_callback_args_t args;
printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n");
args.client_data = link;
smc91c92_event(CS_EVENT_RESET_PHYSICAL, 0, &args);
pcmcia_release_io(link->handle, &link->io);
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
pcmcia_request_io(link->handle, &link->io);
smc91c92_event(CS_EVENT_CARD_RESET, 0, &args);
return check_sig(link);
}
return -ENODEV;
}
/*======================================================================
smc91c92_config() is scheduled to run after a CARD_INSERTION event
is received, to configure the PCMCIA socket, and to make the
ethernet device available to the system.
======================================================================*/
#define CS_EXIT_TEST(ret, svc, label) \
if (ret != CS_SUCCESS) { cs_error(link->handle, svc, ret); goto label; }
static void smc91c92_config(dev_link_t *link)
{
client_handle_t handle = link->handle;
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
struct smc_cfg_mem *cfg_mem;
tuple_t *tuple;
cisparse_t *parse;
u_char *buf;
char *name;
int i, j, rev;
kio_addr_t ioaddr;
u_long mir;
DEBUG(0, "smc91c92_config(0x%p)\n", link);
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
goto config_failed;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
buf = cfg_mem->buf;
tuple->Attributes = tuple->TupleOffset = 0;
tuple->TupleData = (cisdata_t *)buf;
tuple->TupleDataMax = 64;
tuple->DesiredTuple = CISTPL_CONFIG;
i = first_tuple(handle, tuple, parse);
CS_EXIT_TEST(i, ParseTuple, config_failed);
link->conf.ConfigBase = parse->config.base;
link->conf.Present = parse->config.rmask[0];
tuple->DesiredTuple = CISTPL_MANFID;
tuple->Attributes = TUPLE_RETURN_COMMON;
if (first_tuple(handle, tuple, parse) == CS_SUCCESS) {
smc->manfid = parse->manfid.manf;
smc->cardid = parse->manfid.card;
}
/* Configure card */
link->state |= DEV_CONFIG;
if ((smc->manfid == MANFID_OSITECH) &&
(smc->cardid != PRODID_OSITECH_SEVEN)) {
i = osi_config(link);
} else if ((smc->manfid == MANFID_MOTOROLA) ||
((smc->manfid == MANFID_MEGAHERTZ) &&
((smc->cardid == PRODID_MEGAHERTZ_VARIOUS) ||
(smc->cardid == PRODID_MEGAHERTZ_EM3288)))) {
i = mhz_mfc_config(link);
} else {
i = smc_config(link);
}
CS_EXIT_TEST(i, RequestIO, config_failed);
i = pcmcia_request_irq(link->handle, &link->irq);
CS_EXIT_TEST(i, RequestIRQ, config_failed);
i = pcmcia_request_configuration(link->handle, &link->conf);
CS_EXIT_TEST(i, RequestConfiguration, config_failed);
if (smc->manfid == MANFID_MOTOROLA)
mot_config(link);
dev->irq = link->irq.AssignedIRQ;
if ((if_port >= 0) && (if_port <= 2))
dev->if_port = if_port;
else
printk(KERN_NOTICE "smc91c92_cs: invalid if_port requested\n");
switch (smc->manfid) {
case MANFID_OSITECH:
case MANFID_PSION:
i = osi_setup(link, smc->manfid, smc->cardid); break;
case MANFID_SMC:
case MANFID_NEW_MEDIA:
i = smc_setup(link); break;
case 0x128: /* For broken Megahertz cards */
case MANFID_MEGAHERTZ:
i = mhz_setup(link); break;
case MANFID_MOTOROLA:
default: /* get the hw address from EEPROM */
i = mot_setup(link); break;
}
if (i != 0) {
printk(KERN_NOTICE "smc91c92_cs: Unable to find hardware address.\n");
goto config_undo;
}
smc->duplex = 0;
smc->rx_ovrn = 0;
rev = check_sig(link);
name = "???";
if (rev > 0)
switch (rev >> 4) {
case 3: name = "92"; break;
case 4: name = ((rev & 15) >= 6) ? "96" : "94"; break;
case 5: name = "95"; break;
case 7: name = "100"; break;
case 8: name = "100-FD"; break;
case 9: name = "110"; break;
}
ioaddr = dev->base_addr;
if (rev > 0) {
u_long mcr;
SMC_SELECT_BANK(0);
mir = inw(ioaddr + MEMINFO) & 0xff;
if (mir == 0xff) mir++;
/* Get scale factor for memory size */
mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200;
mir *= 128 * (1<<((mcr >> 9) & 7));
SMC_SELECT_BANK(1);
smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT;
smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC;
if (smc->manfid == MANFID_OSITECH)
smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0;
if ((rev >> 4) >= 7)
smc->cfg |= CFG_MII_SELECT;
} else
mir = 0;
if (smc->cfg & CFG_MII_SELECT) {
SMC_SELECT_BANK(3);
for (i = 0; i < 32; i++) {
j = mdio_read(dev, i, 1);
if ((j != 0) && (j != 0xffff)) break;
}
smc->mii_if.phy_id = (i < 32) ? i : -1;
SMC_SELECT_BANK(0);
}
link->dev = &smc->node;
link->state &= ~DEV_CONFIG_PENDING;
SET_NETDEV_DEV(dev, &handle_to_dev(handle));
if (register_netdev(dev) != 0) {
printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
link->dev = NULL;
goto config_undo;
}
strcpy(smc->node.dev_name, dev->name);
printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
"hw_addr ", dev->name, name, (rev & 0x0f), dev->base_addr,
dev->irq);
for (i = 0; i < 6; i++)
printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
if (rev > 0) {
if (mir & 0x3ff)
printk(KERN_INFO " %lu byte", mir);
else
printk(KERN_INFO " %lu kb", mir>>10);
printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ?
"MII" : if_names[dev->if_port]);
}
if (smc->cfg & CFG_MII_SELECT) {
if (smc->mii_if.phy_id != -1) {
DEBUG(0, " MII transceiver at index %d, status %x.\n",
smc->mii_if.phy_id, j);
} else {
printk(KERN_NOTICE " No MII transceivers found!\n");
}
}
kfree(cfg_mem);
return;
config_undo:
unregister_netdev(dev);
config_failed: /* CS_EXIT_TEST() calls jump to here... */
smc91c92_release(link);
link->state &= ~DEV_CONFIG_PENDING;
kfree(cfg_mem);
} /* smc91c92_config */
/*======================================================================
After a card is removed, smc91c92_release() will unregister the net
device, and release the PCMCIA configuration. If the device is
still open, this will be postponed until it is closed.
======================================================================*/
static void smc91c92_release(dev_link_t *link)
{
DEBUG(0, "smc91c92_release(0x%p)\n", link);
pcmcia_release_configuration(link->handle);
pcmcia_release_io(link->handle, &link->io);
pcmcia_release_irq(link->handle, &link->irq);
if (link->win) {
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
iounmap(smc->base);
pcmcia_release_window(link->win);
}
link->state &= ~DEV_CONFIG;
}
/*======================================================================
The card status event handler. Mostly, this schedules other
stuff to run after an event is received. A CARD_REMOVAL event
also sets some flags to discourage the net drivers from trying
to talk to the card any more.
======================================================================*/
static int smc91c92_event(event_t event, int priority,
event_callback_args_t *args)
{
dev_link_t *link = args->client_data;
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
int i;
DEBUG(1, "smc91c92_event(0x%06x)\n", event);
switch (event) {
case CS_EVENT_CARD_REMOVAL:
link->state &= ~DEV_PRESENT;
if (link->state & DEV_CONFIG)
netif_device_detach(dev);
break;
case CS_EVENT_CARD_INSERTION:
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
smc91c92_config(link);
break;
case CS_EVENT_PM_SUSPEND:
link->state |= DEV_SUSPEND;
/* Fall through... */
case CS_EVENT_RESET_PHYSICAL:
if (link->state & DEV_CONFIG) {
if (link->open)
netif_device_detach(dev);
pcmcia_release_configuration(link->handle);
}
break;
case CS_EVENT_PM_RESUME:
link->state &= ~DEV_SUSPEND;
/* Fall through... */
case CS_EVENT_CARD_RESET:
if (link->state & DEV_CONFIG) {
if ((smc->manfid == MANFID_MEGAHERTZ) &&
(smc->cardid == PRODID_MEGAHERTZ_EM3288))
mhz_3288_power(link);
pcmcia_request_configuration(link->handle, &link->conf);
if (smc->manfid == MANFID_MOTOROLA)
mot_config(link);
if ((smc->manfid == MANFID_OSITECH) &&
(smc->cardid != PRODID_OSITECH_SEVEN)) {
/* Power up the card and enable interrupts */
set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR);
set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR);
}
if (((smc->manfid == MANFID_OSITECH) &&
(smc->cardid == PRODID_OSITECH_SEVEN)) ||
((smc->manfid == MANFID_PSION) &&
(smc->cardid == PRODID_PSION_NET100))) {
/* Download the Seven of Diamonds firmware */
for (i = 0; i < sizeof(__Xilinx7OD); i++) {
outb(__Xilinx7OD[i], link->io.BasePort1+2);
udelay(50);
}
}
if (link->open) {
smc_reset(dev);
netif_device_attach(dev);
}
}
break;
}
return 0;
} /* smc91c92_event */
/*======================================================================
MII interface support for SMC91cXX based cards
======================================================================*/
#define MDIO_SHIFT_CLK 0x04
#define MDIO_DATA_OUT 0x01
#define MDIO_DIR_WRITE 0x08
#define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE)
#define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT)
#define MDIO_DATA_READ 0x02
static void mdio_sync(kio_addr_t addr)
{
int bits;
for (bits = 0; bits < 32; bits++) {
outb(MDIO_DATA_WRITE1, addr);
outb(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
}
}
static int mdio_read(struct net_device *dev, int phy_id, int loc)
{
kio_addr_t addr = dev->base_addr + MGMT;
u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
int i, retval = 0;
mdio_sync(addr);
for (i = 13; i >= 0; i--) {
int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
outb(dat, addr);
outb(dat | MDIO_SHIFT_CLK, addr);
}
for (i = 19; i > 0; i--) {
outb(0, addr);
retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
outb(MDIO_SHIFT_CLK, addr);
}
return (retval>>1) & 0xffff;
}
static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
{
kio_addr_t addr = dev->base_addr + MGMT;
u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
int i;
mdio_sync(addr);
for (i = 31; i >= 0; i--) {
int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
outb(dat, addr);
outb(dat | MDIO_SHIFT_CLK, addr);
}
for (i = 1; i >= 0; i--) {
outb(0, addr);
outb(MDIO_SHIFT_CLK, addr);
}
}
/*======================================================================
The driver core code, most of which should be common with a
non-PCMCIA implementation.
======================================================================*/
#ifdef PCMCIA_DEBUG
static void smc_dump(struct net_device *dev)
{
kio_addr_t ioaddr = dev->base_addr;
u_short i, w, save;
save = inw(ioaddr + BANK_SELECT);
for (w = 0; w < 4; w++) {
SMC_SELECT_BANK(w);
printk(KERN_DEBUG "bank %d: ", w);
for (i = 0; i < 14; i += 2)
printk(" %04x", inw(ioaddr + i));
printk("\n");
}
outw(save, ioaddr + BANK_SELECT);
}
#endif
static int smc_open(struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
dev_link_t *link = &smc->link;
#ifdef PCMCIA_DEBUG
DEBUG(0, "%s: smc_open(%p), ID/Window %4.4x.\n",
dev->name, dev, inw(dev->base_addr + BANK_SELECT));
if (pc_debug > 1) smc_dump(dev);
#endif
/* Check that the PCMCIA card is still here. */
if (!DEV_OK(link))
return -ENODEV;
/* Physical device present signature. */
if (check_sig(link) < 0) {
printk("smc91c92_cs: Yikes! Bad chip signature!\n");
return -ENODEV;
}
link->open++;
netif_start_queue(dev);
smc->saved_skb = NULL;
smc->packets_waiting = 0;
smc_reset(dev);
init_timer(&smc->media);
smc->media.function = &media_check;
smc->media.data = (u_long) dev;
smc->media.expires = jiffies + HZ;
add_timer(&smc->media);
return 0;
} /* smc_open */
/*====================================================================*/
static int smc_close(struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
dev_link_t *link = &smc->link;
kio_addr_t ioaddr = dev->base_addr;
DEBUG(0, "%s: smc_close(), status %4.4x.\n",
dev->name, inw(ioaddr + BANK_SELECT));
netif_stop_queue(dev);
/* Shut off all interrupts, and turn off the Tx and Rx sections.
Don't bother to check for chip present. */
SMC_SELECT_BANK(2); /* Nominally paranoia, but do no assume... */
outw(0, ioaddr + INTERRUPT);
SMC_SELECT_BANK(0);
mask_bits(0xff00, ioaddr + RCR);
mask_bits(0xff00, ioaddr + TCR);
/* Put the chip into power-down mode. */
SMC_SELECT_BANK(1);
outw(CTL_POWERDOWN, ioaddr + CONTROL );
link->open--;
del_timer_sync(&smc->media);
return 0;
} /* smc_close */
/*======================================================================
Transfer a packet to the hardware and trigger the packet send.
This may be called at either from either the Tx queue code
or the interrupt handler.
======================================================================*/
static void smc_hardware_send_packet(struct net_device * dev)
{
struct smc_private *smc = netdev_priv(dev);
struct sk_buff *skb = smc->saved_skb;
kio_addr_t ioaddr = dev->base_addr;
u_char packet_no;
if (!skb) {
printk(KERN_ERR "%s: In XMIT with no packet to send.\n", dev->name);
return;
}
/* There should be a packet slot waiting. */
packet_no = inw(ioaddr + PNR_ARR) >> 8;
if (packet_no & 0x80) {
/* If not, there is a hardware problem! Likely an ejected card. */
printk(KERN_WARNING "%s: 91c92 hardware Tx buffer allocation"
" failed, status %#2.2x.\n", dev->name, packet_no);
dev_kfree_skb_irq(skb);
smc->saved_skb = NULL;
netif_start_queue(dev);
return;
}
smc->stats.tx_bytes += skb->len;
/* The card should use the just-allocated buffer. */
outw(packet_no, ioaddr + PNR_ARR);
/* point to the beginning of the packet */
outw(PTR_AUTOINC , ioaddr + POINTER);
/* Send the packet length (+6 for status, length and ctl byte)
and the status word (set to zeros). */
{
u_char *buf = skb->data;
u_int length = skb->len; /* The chip will pad to ethernet min. */
DEBUG(2, "%s: Trying to xmit packet of length %d.\n",
dev->name, length);
/* send the packet length: +6 for status word, length, and ctl */
outw(0, ioaddr + DATA_1);
outw(length + 6, ioaddr + DATA_1);
outsw(ioaddr + DATA_1, buf, length >> 1);
/* The odd last byte, if there is one, goes in the control word. */
outw((length & 1) ? 0x2000 | buf[length-1] : 0, ioaddr + DATA_1);
}
/* Enable the Tx interrupts, both Tx (TxErr) and TxEmpty. */
outw(((IM_TX_INT|IM_TX_EMPTY_INT)<<8) |
(inw(ioaddr + INTERRUPT) & 0xff00),
ioaddr + INTERRUPT);
/* The chip does the rest of the work. */
outw(MC_ENQUEUE , ioaddr + MMU_CMD);
smc->saved_skb = NULL;
dev_kfree_skb_irq(skb);
dev->trans_start = jiffies;
netif_start_queue(dev);
return;
}
/*====================================================================*/
static void smc_tx_timeout(struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
printk(KERN_NOTICE "%s: SMC91c92 transmit timed out, "
"Tx_status %2.2x status %4.4x.\n",
dev->name, inw(ioaddr)&0xff, inw(ioaddr + 2));
smc->stats.tx_errors++;
smc_reset(dev);
dev->trans_start = jiffies;
smc->saved_skb = NULL;
netif_wake_queue(dev);
}
static int smc_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
u_short num_pages;
short time_out, ir;
netif_stop_queue(dev);
DEBUG(2, "%s: smc_start_xmit(length = %d) called,"
" status %4.4x.\n", dev->name, skb->len, inw(ioaddr + 2));
if (smc->saved_skb) {
/* THIS SHOULD NEVER HAPPEN. */
smc->stats.tx_aborted_errors++;
printk(KERN_DEBUG "%s: Internal error -- sent packet while busy.\n",
dev->name);
return 1;
}
smc->saved_skb = skb;
num_pages = skb->len >> 8;
if (num_pages > 7) {
printk(KERN_ERR "%s: Far too big packet error.\n", dev->name);
dev_kfree_skb (skb);
smc->saved_skb = NULL;
smc->stats.tx_dropped++;
return 0; /* Do not re-queue this packet. */
}
/* A packet is now waiting. */
smc->packets_waiting++;
SMC_SELECT_BANK(2); /* Paranoia, we should always be in window 2 */
/* need MC_RESET to keep the memory consistent. errata? */
if (smc->rx_ovrn) {
outw(MC_RESET, ioaddr + MMU_CMD);
smc->rx_ovrn = 0;
}
/* Allocate the memory; send the packet now if we win. */
outw(MC_ALLOC | num_pages, ioaddr + MMU_CMD);
for (time_out = MEMORY_WAIT_TIME; time_out >= 0; time_out--) {
ir = inw(ioaddr+INTERRUPT);
if (ir & IM_ALLOC_INT) {
/* Acknowledge the interrupt, send the packet. */
outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT);
smc_hardware_send_packet(dev); /* Send the packet now.. */
return 0;
}
}
/* Otherwise defer until the Tx-space-allocated interrupt. */
DEBUG(2, "%s: memory allocation deferred.\n", dev->name);
outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
return 0;
}
/*======================================================================
Handle a Tx anomolous event. Entered while in Window 2.
======================================================================*/
static void smc_tx_err(struct net_device * dev)
{
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
int saved_packet = inw(ioaddr + PNR_ARR) & 0xff;
int packet_no = inw(ioaddr + FIFO_PORTS) & 0x7f;
int tx_status;
/* select this as the packet to read from */
outw(packet_no, ioaddr + PNR_ARR);
/* read the first word from this packet */
outw(PTR_AUTOINC | PTR_READ | 0, ioaddr + POINTER);
tx_status = inw(ioaddr + DATA_1);
smc->stats.tx_errors++;
if (tx_status & TS_LOSTCAR) smc->stats.tx_carrier_errors++;
if (tx_status & TS_LATCOL) smc->stats.tx_window_errors++;
if (tx_status & TS_16COL) {
smc->stats.tx_aborted_errors++;
smc->tx_err++;
}
if (tx_status & TS_SUCCESS) {
printk(KERN_NOTICE "%s: Successful packet caused error "
"interrupt?\n", dev->name);
}
/* re-enable transmit */
SMC_SELECT_BANK(0);
outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
SMC_SELECT_BANK(2);
outw(MC_FREEPKT, ioaddr + MMU_CMD); /* Free the packet memory. */
/* one less packet waiting for me */
smc->packets_waiting--;
outw(saved_packet, ioaddr + PNR_ARR);
return;
}
/*====================================================================*/
static void smc_eph_irq(struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
u_short card_stats, ephs;
SMC_SELECT_BANK(0);
ephs = inw(ioaddr + EPH);
DEBUG(2, "%s: Ethernet protocol handler interrupt, status"
" %4.4x.\n", dev->name, ephs);
/* Could be a counter roll-over warning: update stats. */
card_stats = inw(ioaddr + COUNTER);
/* single collisions */
smc->stats.collisions += card_stats & 0xF;
card_stats >>= 4;
/* multiple collisions */
smc->stats.collisions += card_stats & 0xF;
#if 0 /* These are for when linux supports these statistics */
card_stats >>= 4; /* deferred */
card_stats >>= 4; /* excess deferred */
#endif
/* If we had a transmit error we must re-enable the transmitter. */
outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
/* Clear a link error interrupt. */
SMC_SELECT_BANK(1);
outw(CTL_AUTO_RELEASE | 0x0000, ioaddr + CONTROL);
outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
ioaddr + CONTROL);
SMC_SELECT_BANK(2);
}
/*====================================================================*/
static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct net_device *dev = dev_id;
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr;
u_short saved_bank, saved_pointer, mask, status;
unsigned int handled = 1;
char bogus_cnt = INTR_WORK; /* Work we are willing to do. */
if (!netif_device_present(dev))
return IRQ_NONE;
ioaddr = dev->base_addr;
DEBUG(3, "%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
irq, ioaddr);
smc->watchdog = 0;
saved_bank = inw(ioaddr + BANK_SELECT);
if ((saved_bank & 0xff00) != 0x3300) {
/* The device does not exist -- the card could be off-line, or
maybe it has been ejected. */
DEBUG(1, "%s: SMC91c92 interrupt %d for non-existent"
"/ejected device.\n", dev->name, irq);
handled = 0;
goto irq_done;
}
SMC_SELECT_BANK(2);
saved_pointer = inw(ioaddr + POINTER);
mask = inw(ioaddr + INTERRUPT) >> 8;
/* clear all interrupts */
outw(0, ioaddr + INTERRUPT);
do { /* read the status flag, and mask it */
status = inw(ioaddr + INTERRUPT) & 0xff;
DEBUG(3, "%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
status, mask);
if ((status & mask) == 0) {
if (bogus_cnt == INTR_WORK)
handled = 0;
break;
}
if (status & IM_RCV_INT) {
/* Got a packet(s). */
smc_rx(dev);
}
if (status & IM_TX_INT) {
smc_tx_err(dev);
outw(IM_TX_INT, ioaddr + INTERRUPT);
}
status &= mask;
if (status & IM_TX_EMPTY_INT) {
outw(IM_TX_EMPTY_INT, ioaddr + INTERRUPT);
mask &= ~IM_TX_EMPTY_INT;
smc->stats.tx_packets += smc->packets_waiting;
smc->packets_waiting = 0;
}
if (status & IM_ALLOC_INT) {
/* Clear this interrupt so it doesn't happen again */
mask &= ~IM_ALLOC_INT;
smc_hardware_send_packet(dev);
/* enable xmit interrupts based on this */
mask |= (IM_TX_EMPTY_INT | IM_TX_INT);
/* and let the card send more packets to me */
netif_wake_queue(dev);
}
if (status & IM_RX_OVRN_INT) {
smc->stats.rx_errors++;
smc->stats.rx_fifo_errors++;
if (smc->duplex)
smc->rx_ovrn = 1; /* need MC_RESET outside smc_interrupt */
outw(IM_RX_OVRN_INT, ioaddr + INTERRUPT);
}
if (status & IM_EPH_INT)
smc_eph_irq(dev);
} while (--bogus_cnt);
DEBUG(3, " Restoring saved registers mask %2.2x bank %4.4x"
" pointer %4.4x.\n", mask, saved_bank, saved_pointer);
/* restore state register */
outw((mask<<8), ioaddr + INTERRUPT);
outw(saved_pointer, ioaddr + POINTER);
SMC_SELECT_BANK(saved_bank);
DEBUG(3, "%s: Exiting interrupt IRQ%d.\n", dev->name, irq);
irq_done:
if ((smc->manfid == MANFID_OSITECH) &&
(smc->cardid != PRODID_OSITECH_SEVEN)) {
/* Retrigger interrupt if needed */
mask_bits(0x00ff, ioaddr-0x10+OSITECH_RESET_ISR);
set_bits(0x0300, ioaddr-0x10+OSITECH_RESET_ISR);
}
if (smc->manfid == MANFID_MOTOROLA) {
u_char cor;
cor = readb(smc->base + MOT_UART + CISREG_COR);
writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_UART + CISREG_COR);
writeb(cor, smc->base + MOT_UART + CISREG_COR);
cor = readb(smc->base + MOT_LAN + CISREG_COR);
writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR);
writeb(cor, smc->base + MOT_LAN + CISREG_COR);
}
#ifdef DOES_NOT_WORK
if (smc->base != NULL) { /* Megahertz MFC's */
readb(smc->base+MEGAHERTZ_ISR);
readb(smc->base+MEGAHERTZ_ISR);
}
#endif
return IRQ_RETVAL(handled);
}
/*====================================================================*/
static void smc_rx(struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
int rx_status;
int packet_length; /* Caution: not frame length, rather words
to transfer from the chip. */
/* Assertion: we are in Window 2. */
if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) {
printk(KERN_ERR "%s: smc_rx() with nothing on Rx FIFO.\n",
dev->name);
return;
}
/* Reset the read pointer, and read the status and packet length. */
outw(PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER);
rx_status = inw(ioaddr + DATA_1);
packet_length = inw(ioaddr + DATA_1) & 0x07ff;
DEBUG(2, "%s: Receive status %4.4x length %d.\n",
dev->name, rx_status, packet_length);
if (!(rx_status & RS_ERRORS)) {
/* do stuff to make a new packet */
struct sk_buff *skb;
/* Note: packet_length adds 5 or 6 extra bytes here! */
skb = dev_alloc_skb(packet_length+2);
if (skb == NULL) {
DEBUG(1, "%s: Low memory, packet dropped.\n", dev->name);
smc->stats.rx_dropped++;
outw(MC_RELEASE, ioaddr + MMU_CMD);
return;
}
packet_length -= (rx_status & RS_ODDFRAME ? 5 : 6);
skb_reserve(skb, 2);
insw(ioaddr+DATA_1, skb_put(skb, packet_length),
(packet_length+1)>>1);
skb->protocol = eth_type_trans(skb, dev);
skb->dev = dev;
netif_rx(skb);
dev->last_rx = jiffies;
smc->stats.rx_packets++;
smc->stats.rx_bytes += packet_length;
if (rx_status & RS_MULTICAST)
smc->stats.multicast++;
} else {
/* error ... */
smc->stats.rx_errors++;
if (rx_status & RS_ALGNERR) smc->stats.rx_frame_errors++;
if (rx_status & (RS_TOOSHORT | RS_TOOLONG))
smc->stats.rx_length_errors++;
if (rx_status & RS_BADCRC) smc->stats.rx_crc_errors++;
}
/* Let the MMU free the memory of this packet. */
outw(MC_RELEASE, ioaddr + MMU_CMD);
return;
}
/*====================================================================*/
static struct net_device_stats *smc_get_stats(struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
/* Nothing to update - the 91c92 is a pretty primative chip. */
return &smc->stats;
}
/*======================================================================
Calculate values for the hardware multicast filter hash table.
======================================================================*/
static void fill_multicast_tbl(int count, struct dev_mc_list *addrs,
u_char *multicast_table)
{
struct dev_mc_list *mc_addr;
for (mc_addr = addrs; mc_addr && --count > 0; mc_addr = mc_addr->next) {
u_int position = ether_crc(6, mc_addr->dmi_addr);
#ifndef final_version /* Verify multicast address. */
if ((mc_addr->dmi_addr[0] & 1) == 0)
continue;
#endif
multicast_table[position >> 29] |= 1 << ((position >> 26) & 7);
}
}
/*======================================================================
Set the receive mode.
This routine is used by both the protocol level to notify us of
promiscuous/multicast mode changes, and by the open/reset code to
initialize the Rx registers. We always set the multicast list and
leave the receiver running.
======================================================================*/
static void set_rx_mode(struct net_device *dev)
{
kio_addr_t ioaddr = dev->base_addr;
struct smc_private *smc = netdev_priv(dev);
u_int multicast_table[ 2 ] = { 0, };
unsigned long flags;
u_short rx_cfg_setting;
if (dev->flags & IFF_PROMISC) {
printk(KERN_NOTICE "%s: setting Rx mode to promiscuous.\n", dev->name);
rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti;
} else if (dev->flags & IFF_ALLMULTI)
rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti;
else {
if (dev->mc_count) {
fill_multicast_tbl(dev->mc_count, dev->mc_list,
(u_char *)multicast_table);
}
rx_cfg_setting = RxStripCRC | RxEnable;
}
/* Load MC table and Rx setting into the chip without interrupts. */
spin_lock_irqsave(&smc->lock, flags);
SMC_SELECT_BANK(3);
outl(multicast_table[0], ioaddr + MULTICAST0);
outl(multicast_table[1], ioaddr + MULTICAST4);
SMC_SELECT_BANK(0);
outw(rx_cfg_setting, ioaddr + RCR);
SMC_SELECT_BANK(2);
spin_unlock_irqrestore(&smc->lock, flags);
return;
}
/*======================================================================
Senses when a card's config changes. Here, it's coax or TP.
======================================================================*/
static int s9k_config(struct net_device *dev, struct ifmap *map)
{
struct smc_private *smc = netdev_priv(dev);
if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
if (smc->cfg & CFG_MII_SELECT)
return -EOPNOTSUPP;
else if (map->port > 2)
return -EINVAL;
dev->if_port = map->port;
printk(KERN_INFO "%s: switched to %s port\n",
dev->name, if_names[dev->if_port]);
smc_reset(dev);
}
return 0;
}
/*======================================================================
Reset the chip, reloading every register that might be corrupted.
======================================================================*/
/*
Set transceiver type, perhaps to something other than what the user
specified in dev->if_port.
*/
static void smc_set_xcvr(struct net_device *dev, int if_port)
{
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
u_short saved_bank;
saved_bank = inw(ioaddr + BANK_SELECT);
SMC_SELECT_BANK(1);
if (if_port == 2) {
outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG);
if ((smc->manfid == MANFID_OSITECH) &&
(smc->cardid != PRODID_OSITECH_SEVEN))
set_bits(OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
smc->media_status = ((dev->if_port == 0) ? 0x0001 : 0x0002);
} else {
outw(smc->cfg, ioaddr + CONFIG);
if ((smc->manfid == MANFID_OSITECH) &&
(smc->cardid != PRODID_OSITECH_SEVEN))
mask_bits(~OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
smc->media_status = ((dev->if_port == 0) ? 0x0012 : 0x4001);
}
SMC_SELECT_BANK(saved_bank);
}
static void smc_reset(struct net_device *dev)
{
kio_addr_t ioaddr = dev->base_addr;
struct smc_private *smc = netdev_priv(dev);
int i;
DEBUG(0, "%s: smc91c92 reset called.\n", dev->name);
/* The first interaction must be a write to bring the chip out
of sleep mode. */
SMC_SELECT_BANK(0);
/* Reset the chip. */
outw(RCR_SOFTRESET, ioaddr + RCR);
udelay(10);
/* Clear the transmit and receive configuration registers. */
outw(RCR_CLEAR, ioaddr + RCR);
outw(TCR_CLEAR, ioaddr + TCR);
/* Set the Window 1 control, configuration and station addr registers.
No point in writing the I/O base register ;-> */
SMC_SELECT_BANK(1);
/* Automatically release succesfully transmitted packets,
Accept link errors, counter and Tx error interrupts. */
outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
ioaddr + CONTROL);
smc_set_xcvr(dev, dev->if_port);
if ((smc->manfid == MANFID_OSITECH) &&
(smc->cardid != PRODID_OSITECH_SEVEN))
outw((dev->if_port == 2 ? OSI_AUI_PWR : 0) |
(inw(ioaddr-0x10+OSITECH_AUI_PWR) & 0xff00),
ioaddr - 0x10 + OSITECH_AUI_PWR);
/* Fill in the physical address. The databook is wrong about the order! */
for (i = 0; i < 6; i += 2)
outw((dev->dev_addr[i+1]<<8)+dev->dev_addr[i],
ioaddr + ADDR0 + i);
/* Reset the MMU */
SMC_SELECT_BANK(2);
outw(MC_RESET, ioaddr + MMU_CMD);
outw(0, ioaddr + INTERRUPT);
/* Re-enable the chip. */
SMC_SELECT_BANK(0);
outw(((smc->cfg & CFG_MII_SELECT) ? 0 : TCR_MONCSN) |
TCR_ENABLE | TCR_PAD_EN | smc->duplex, ioaddr + TCR);
set_rx_mode(dev);
if (smc->cfg & CFG_MII_SELECT) {
SMC_SELECT_BANK(3);
/* Reset MII */
mdio_write(dev, smc->mii_if.phy_id, 0, 0x8000);
/* Advertise 100F, 100H, 10F, 10H */
mdio_write(dev, smc->mii_if.phy_id, 4, 0x01e1);
/* Restart MII autonegotiation */
mdio_write(dev, smc->mii_if.phy_id, 0, 0x0000);
mdio_write(dev, smc->mii_if.phy_id, 0, 0x1200);
}
/* Enable interrupts. */
SMC_SELECT_BANK(2);
outw((IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) << 8,
ioaddr + INTERRUPT);
}
/*======================================================================
Media selection timer routine
======================================================================*/
static void media_check(u_long arg)
{
struct net_device *dev = (struct net_device *) arg;
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
u_short i, media, saved_bank;
u_short link;
saved_bank = inw(ioaddr + BANK_SELECT);
if (!netif_device_present(dev))
goto reschedule;
SMC_SELECT_BANK(2);
/* need MC_RESET to keep the memory consistent. errata? */
if (smc->rx_ovrn) {
outw(MC_RESET, ioaddr + MMU_CMD);
smc->rx_ovrn = 0;
}
i = inw(ioaddr + INTERRUPT);
SMC_SELECT_BANK(0);
media = inw(ioaddr + EPH) & EPH_LINK_OK;
SMC_SELECT_BANK(1);
media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1;
/* Check for pending interrupt with watchdog flag set: with
this, we can limp along even if the interrupt is blocked */
if (smc->watchdog++ && ((i>>8) & i)) {
if (!smc->fast_poll)
printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
smc_interrupt(dev->irq, smc, NULL);
smc->fast_poll = HZ;
}
if (smc->fast_poll) {
smc->fast_poll--;
smc->media.expires = jiffies + HZ/100;
add_timer(&smc->media);
SMC_SELECT_BANK(saved_bank);
return;
}
if (smc->cfg & CFG_MII_SELECT) {
if (smc->mii_if.phy_id < 0)
goto reschedule;
SMC_SELECT_BANK(3);
link = mdio_read(dev, smc->mii_if.phy_id, 1);
if (!link || (link == 0xffff)) {
printk(KERN_INFO "%s: MII is missing!\n", dev->name);
smc->mii_if.phy_id = -1;
goto reschedule;
}
link &= 0x0004;
if (link != smc->link_status) {
u_short p = mdio_read(dev, smc->mii_if.phy_id, 5);
printk(KERN_INFO "%s: %s link beat\n", dev->name,
(link) ? "found" : "lost");
smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40))
? TCR_FDUPLX : 0);
if (link) {
printk(KERN_INFO "%s: autonegotiation complete: "
"%sbaseT-%cD selected\n", dev->name,
((p & 0x0180) ? "100" : "10"),
(smc->duplex ? 'F' : 'H'));
}
SMC_SELECT_BANK(0);
outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR);
smc->link_status = link;
}
goto reschedule;
}
/* Ignore collisions unless we've had no rx's recently */
if (time_after(jiffies, dev->last_rx + HZ)) {
if (smc->tx_err || (smc->media_status & EPH_16COL))
media |= EPH_16COL;
}
smc->tx_err = 0;
if (media != smc->media_status) {
if ((media & smc->media_status & 1) &&
((smc->media_status ^ media) & EPH_LINK_OK))
printk(KERN_INFO "%s: %s link beat\n", dev->name,
(smc->media_status & EPH_LINK_OK ? "lost" : "found"));
else if ((media & smc->media_status & 2) &&
((smc->media_status ^ media) & EPH_16COL))
printk(KERN_INFO "%s: coax cable %s\n", dev->name,
(media & EPH_16COL ? "problem" : "ok"));
if (dev->if_port == 0) {
if (media & 1) {
if (media & EPH_LINK_OK)
printk(KERN_INFO "%s: flipped to 10baseT\n",
dev->name);
else
smc_set_xcvr(dev, 2);
} else {
if (media & EPH_16COL)
smc_set_xcvr(dev, 1);
else
printk(KERN_INFO "%s: flipped to 10base2\n",
dev->name);
}
}
smc->media_status = media;
}
reschedule:
smc->media.expires = jiffies + HZ;
add_timer(&smc->media);
SMC_SELECT_BANK(saved_bank);
}
static int smc_link_ok(struct net_device *dev)
{
kio_addr_t ioaddr = dev->base_addr;
struct smc_private *smc = netdev_priv(dev);
if (smc->cfg & CFG_MII_SELECT) {
return mii_link_ok(&smc->mii_if);
} else {
SMC_SELECT_BANK(0);
return inw(ioaddr + EPH) & EPH_LINK_OK;
}
}
static int smc_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
{
u16 tmp;
kio_addr_t ioaddr = dev->base_addr;
ecmd->supported = (SUPPORTED_TP | SUPPORTED_AUI |
SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full);
SMC_SELECT_BANK(1);
tmp = inw(ioaddr + CONFIG);
ecmd->port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP;
ecmd->transceiver = XCVR_INTERNAL;
ecmd->speed = SPEED_10;
ecmd->phy_address = ioaddr + MGMT;
SMC_SELECT_BANK(0);
tmp = inw(ioaddr + TCR);
ecmd->duplex = (tmp & TCR_FDUPLX) ? DUPLEX_FULL : DUPLEX_HALF;
return 0;
}
static int smc_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
{
u16 tmp;
kio_addr_t ioaddr = dev->base_addr;
if (ecmd->speed != SPEED_10)
return -EINVAL;
if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
return -EINVAL;
if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI)
return -EINVAL;
if (ecmd->transceiver != XCVR_INTERNAL)
return -EINVAL;
if (ecmd->port == PORT_AUI)
smc_set_xcvr(dev, 1);
else
smc_set_xcvr(dev, 0);
SMC_SELECT_BANK(0);
tmp = inw(ioaddr + TCR);
if (ecmd->duplex == DUPLEX_FULL)
tmp |= TCR_FDUPLX;
else
tmp &= ~TCR_FDUPLX;
outw(tmp, ioaddr + TCR);
return 0;
}
static int check_if_running(struct net_device *dev)
{
if (!netif_running(dev))
return -EINVAL;
return 0;
}
static void smc_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
}
static int smc_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
u16 saved_bank = inw(ioaddr + BANK_SELECT);
int ret;
SMC_SELECT_BANK(3);
spin_lock_irq(&smc->lock);
if (smc->cfg & CFG_MII_SELECT)
ret = mii_ethtool_gset(&smc->mii_if, ecmd);
else
ret = smc_netdev_get_ecmd(dev, ecmd);
spin_unlock_irq(&smc->lock);
SMC_SELECT_BANK(saved_bank);
return ret;
}
static int smc_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
u16 saved_bank = inw(ioaddr + BANK_SELECT);
int ret;
SMC_SELECT_BANK(3);
spin_lock_irq(&smc->lock);
if (smc->cfg & CFG_MII_SELECT)
ret = mii_ethtool_sset(&smc->mii_if, ecmd);
else
ret = smc_netdev_set_ecmd(dev, ecmd);
spin_unlock_irq(&smc->lock);
SMC_SELECT_BANK(saved_bank);
return ret;
}
static u32 smc_get_link(struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
kio_addr_t ioaddr = dev->base_addr;
u16 saved_bank = inw(ioaddr + BANK_SELECT);
u32 ret;
SMC_SELECT_BANK(3);
spin_lock_irq(&smc->lock);
ret = smc_link_ok(dev);
spin_unlock_irq(&smc->lock);
SMC_SELECT_BANK(saved_bank);
return ret;
}
#ifdef PCMCIA_DEBUG
static u32 smc_get_msglevel(struct net_device *dev)
{
return pc_debug;
}
static void smc_set_msglevel(struct net_device *dev, u32 val)
{
pc_debug = val;
}
#endif
static int smc_nway_reset(struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
if (smc->cfg & CFG_MII_SELECT) {
kio_addr_t ioaddr = dev->base_addr;
u16 saved_bank = inw(ioaddr + BANK_SELECT);
int res;
SMC_SELECT_BANK(3);
res = mii_nway_restart(&smc->mii_if);
SMC_SELECT_BANK(saved_bank);
return res;
} else
return -EOPNOTSUPP;
}
static struct ethtool_ops ethtool_ops = {
.begin = check_if_running,
.get_drvinfo = smc_get_drvinfo,
.get_settings = smc_get_settings,
.set_settings = smc_set_settings,
.get_link = smc_get_link,
#ifdef PCMCIA_DEBUG
.get_msglevel = smc_get_msglevel,
.set_msglevel = smc_set_msglevel,
#endif
.nway_reset = smc_nway_reset,
};
static int smc_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
{
struct smc_private *smc = netdev_priv(dev);
struct mii_ioctl_data *mii = if_mii(rq);
int rc = 0;
u16 saved_bank;
kio_addr_t ioaddr = dev->base_addr;
if (!netif_running(dev))
return -EINVAL;
spin_lock_irq(&smc->lock);
saved_bank = inw(ioaddr + BANK_SELECT);
SMC_SELECT_BANK(3);
rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL);
SMC_SELECT_BANK(saved_bank);
spin_unlock_irq(&smc->lock);
return rc;
}
static struct pcmcia_device_id smc91c92_ids[] = {
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0109, 0x0501),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0140, 0x000a),
PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020),
PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023),
PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "Fast Ethernet PCCard", 0x78f308dc, 0xdcea68bc),
PCMCIA_DEVICE_PROD_ID12("dit Co., Ltd.", "PC Card-10/100BTX", 0xe59365c8, 0x6a2161d1),
PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L100C", 0x6a26d1cf, 0xc16ce9c5),
PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9),
PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953),
PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a),
PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314),
PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc),
PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9),
PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d),
/* These conflict with other cards! */
/* PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0100), */
/* PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), */
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids);
static struct pcmcia_driver smc91c92_cs_driver = {
.owner = THIS_MODULE,
.drv = {
.name = "smc91c92_cs",
},
.attach = smc91c92_attach,
.event = smc91c92_event,
.detach = smc91c92_detach,
.id_table = smc91c92_ids,
};
static int __init init_smc91c92_cs(void)
{
return pcmcia_register_driver(&smc91c92_cs_driver);
}
static void __exit exit_smc91c92_cs(void)
{
pcmcia_unregister_driver(&smc91c92_cs_driver);
BUG_ON(dev_list != NULL);
}
module_init(init_smc91c92_cs);
module_exit(exit_smc91c92_cs);
