/*
* IXP2400 MSF network device driver for the Radisys ENP2611
* Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
* Dedicated to Marija Kulikova.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <asm/hardware/uengine.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include "ixpdev.h"
#include "caleb.h"
#include "ixp2400-msf.h"
#include "pm3386.h"
/***********************************************************************
* The Radisys ENP2611 is a PCI form factor board with three SFP GBIC
* slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA
* to the IXP2400.
*
* +-------------+
* SFP GBIC #0 ---+ | +---------+
* | PM3386 #0 +-------+ |
* SFP GBIC #1 ---+ | | "Caleb" | +---------+
* +-------------+ | | | |
* | SPI-3 +---------+ IXP2400 |
* +-------------+ | bridge | | |
* SFP GBIC #2 ---+ | | FPGA | +---------+
* | PM3386 #1 +-------+ |
* | | +---------+
* +-------------+
* ^ ^ ^
* | 1.25Gbaud | 104MHz | 104MHz
* | SERDES ea. | SPI-3 ea. | SPI-3
*
***********************************************************************/
static struct ixp2400_msf_parameters enp2611_msf_parameters =
{
.rx_mode = IXP2400_RX_MODE_UTOPIA_POS |
IXP2400_RX_MODE_1x32 |
IXP2400_RX_MODE_MPHY |
IXP2400_RX_MODE_MPHY_32 |
IXP2400_RX_MODE_MPHY_POLLED_STATUS |
IXP2400_RX_MODE_MPHY_LEVEL3 |
IXP2400_RX_MODE_RBUF_SIZE_64,
.rxclk01_multiplier = IXP2400_PLL_MULTIPLIER_16,
.rx_poll_ports = 3,
.rx_channel_mode = {
IXP2400_PORT_RX_MODE_MASTER |
IXP2400_PORT_RX_MODE_POS_PHY |
IXP2400_PORT_RX_MODE_POS_PHY_L3 |
IXP2400_PORT_RX_MODE_ODD_PARITY |
IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
IXP2400_PORT_RX_MODE_MASTER |
IXP2400_PORT_RX_MODE_POS_PHY |
IXP2400_PORT_RX_MODE_POS_PHY_L3 |
IXP2400_PORT_RX_MODE_ODD_PARITY |
IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
IXP2400_PORT_RX_MODE_MASTER |
IXP2400_PORT_RX_MODE_POS_PHY |
IXP2400_PORT_RX_MODE_POS_PHY_L3 |
IXP2400_PORT_RX_MODE_ODD_PARITY |
IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
IXP2400_PORT_RX_MODE_MASTER |
IXP2400_PORT_RX_MODE_POS_PHY |
IXP2400_PORT_RX_MODE_POS_PHY_L3 |
IXP2400_PORT_RX_MODE_ODD_PARITY |
IXP2400_PORT_RX_MODE_2_CYCLE_DECODE
},
.tx_mode = IXP2400_TX_MODE_UTOPIA_POS |
IXP2400_TX_MODE_1x32 |
IXP2400_TX_MODE_MPHY |
IXP2400_TX_MODE_MPHY_32 |
IXP2400_TX_MODE_MPHY_POLLED_STATUS |
IXP2400_TX_MODE_MPHY_LEVEL3 |
IXP2400_TX_MODE_TBUF_SIZE_64,
.txclk01_multiplier = IXP2400_PLL_MULTIPLIER_16,
.tx_poll_ports = 3,
.tx_channel_mode = {
IXP2400_PORT_TX_MODE_MASTER |
IXP2400_PORT_TX_MODE_POS_PHY |
IXP2400_PORT_TX_MODE_ODD_PARITY |
IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
IXP2400_PORT_TX_MODE_MASTER |
IXP2400_PORT_TX_MODE_POS_PHY |
IXP2400_PORT_TX_MODE_ODD_PARITY |
IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
IXP2400_PORT_TX_MODE_MASTER |
IXP2400_PORT_TX_MODE_POS_PHY |
IXP2400_PORT_TX_MODE_ODD_PARITY |
IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
IXP2400_PORT_TX_MODE_MASTER |
IXP2400_PORT_TX_MODE_POS_PHY |
IXP2400_PORT_TX_MODE_ODD_PARITY |
IXP2400_PORT_TX_MODE_2_CYCLE_DECODE
}
};
struct enp2611_ixpdev_priv
{
struct ixpdev_priv ixpdev_priv;
struct net_device_stats stats;
};
static struct net_device *nds[3];
static struct timer_list link_check_timer;
static struct net_device_stats *enp2611_get_stats(struct net_device *dev)
{
struct enp2611_ixpdev_priv *ip = netdev_priv(dev);
pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats));
return &(ip->stats);
}
/* @@@ Poll the SFP moddef0 line too. */
/* @@@ Try to use the pm3386 DOOL interrupt as well. */
static void enp2611_check_link_status(unsigned long __dummy)
{
int i;
for (i = 0; i < 3; i++) {
struct net_device *dev;
int status;
dev = nds[i];
if (dev == NULL)
continue;
status = pm3386_is_link_up(i);
if (status && !netif_carrier_ok(dev)) {
/* @@@ Should report autonegotiation status. */
printk(KERN_INFO "%s: NIC Link is Up\n", dev->name);
pm3386_enable_tx(i);
caleb_enable_tx(i);
netif_carrier_on(dev);
} else if (!status && netif_carrier_ok(dev)) {
printk(KERN_INFO "%s: NIC Link is Down\n", dev->name);
netif_carrier_off(dev);
caleb_disable_tx(i);
pm3386_disable_tx(i);
}
}
link_check_timer.expires = jiffies + HZ / 10;
add_timer(&link_check_timer);
}
static void enp2611_set_port_admin_status(int port, int up)
{
if (up) {
caleb_enable_rx(port);
pm3386_set_carrier(port, 1);
pm3386_enable_rx(port);
} else {
caleb_disable_tx(port);
pm3386_disable_tx(port);
/* @@@ Flush out pending packets. */
pm3386_set_carrier(port, 0);
pm3386_disable_rx(port);
caleb_disable_rx(port);
}
}
static int __init enp2611_init_module(void)
{
int ports;
int i;
if (!machine_is_enp2611())
return -ENODEV;
caleb_reset();
pm3386_reset();
ports = pm3386_port_count();
for (i = 0; i < ports; i++) {
nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
if (nds[i] == NULL) {
while (--i >= 0)
free_netdev(nds[i]);
return -ENOMEM;
}
nds[i]->get_stats = enp2611_get_stats;
pm3386_init_port(i);
pm3386_get_mac(i, nds[i]->dev_addr);
}
ixp2400_msf_init(&enp2611_msf_parameters);
if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
for (i = 0; i < ports; i++)
if (nds[i])
free_netdev(nds[i]);
return -EINVAL;
}
init_timer(&link_check_timer);
link_check_timer.function = enp2611_check_link_status;
link_check_timer.expires = jiffies;
add_timer(&link_check_timer);
return 0;
}
static void __exit enp2611_cleanup_module(void)
{
int i;
del_timer_sync(&link_check_timer);
ixpdev_deinit();
for (i = 0; i < 3; i++)
free_netdev(nds[i]);
}
module_init(enp2611_init_module);
module_exit(enp2611_cleanup_module);
MODULE_LICENSE("GPL");
