/*
* Freescale eSDHC controller driver.
*
* Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/io.h>
#include <linux/of.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mmc/host.h>
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
#define VENDOR_V_22 0x12
static u32 esdhc_readl(struct sdhci_host *host, int reg)
{
u32 ret;
ret = in_be32(host->ioaddr + reg);
/*
* The bit of ADMA flag in eSDHC is not compatible with standard
* SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
* supported by eSDHC.
* And for many FSL eSDHC controller, the reset value of field
* SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA,
* only these vendor version is greater than 2.2/0x12 support ADMA.
* For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the
* the verdor version number, oxFE is SDHCI_HOST_VERSION.
*/
if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) {
u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
if (tmp > VENDOR_V_22)
ret |= SDHCI_CAN_DO_ADMA2;
}
return ret;
}
static u16 esdhc_readw(struct sdhci_host *host, int reg)
{
u16 ret;
int base = reg & ~0x3;
int shift = (reg & 0x2) * 8;
if (unlikely(reg == SDHCI_HOST_VERSION))
ret = in_be32(host->ioaddr + base) & 0xffff;
else
ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff;
return ret;
}
static u8 esdhc_readb(struct sdhci_host *host, int reg)
{
int base = reg & ~0x3;
int shift = (reg & 0x3) * 8;
u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
/*
* "DMA select" locates at offset 0x28 in SD specification, but on
* P5020 or P3041, it locates at 0x29.
*/
if (reg == SDHCI_HOST_CONTROL) {
u32 dma_bits;
dma_bits = in_be32(host->ioaddr + reg);
/* DMA select is 22,23 bits in Protocol Control Register */
dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
/* fixup the result */
ret &= ~SDHCI_CTRL_DMA_MASK;
ret |= dma_bits;
}
return ret;
}
static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
{
if (reg == SDHCI_BLOCK_SIZE) {
/*
* Two last DMA bits are reserved, and first one is used for
* non-standard blksz of 4096 bytes that we don't support
* yet. So clear the DMA boundary bits.
*/
val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
}
sdhci_be32bs_writew(host, val, reg);
}
static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
{
/*
* "DMA select" location is offset 0x28 in SD specification, but on
* P5020 or P3041, it's located at 0x29.
*/
if (reg == SDHCI_HOST_CONTROL) {
u32 dma_bits;
/* DMA select is 22,23 bits in Protocol Control Register */
dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
dma_bits);
val &= ~SDHCI_CTRL_DMA_MASK;
val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
}
/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
if (reg == SDHCI_HOST_CONTROL)
val &= ~ESDHC_HOST_CONTROL_RES;
sdhci_be32bs_writeb(host, val, reg);
}
static int esdhc_of_enable_dma(struct sdhci_host *host)
{
setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
return 0;
}
static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
return pltfm_host->clock;
}
static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
return pltfm_host->clock / 256 / 16;
}
static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
{
/* Workaround to reduce the clock frequency for p1010 esdhc */
if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
if (clock > 20000000)
clock -= 5000000;
if (clock > 40000000)
clock -= 5000000;
}
/* Set the clock */
esdhc_set_clock(host, clock);
}
#ifdef CONFIG_PM
static u32 esdhc_proctl;
static void esdhc_of_suspend(struct sdhci_host *host)
{
esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL);
}
static void esdhc_of_resume(struct sdhci_host *host)
{
esdhc_of_enable_dma(host);
sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
}
#endif
static struct sdhci_ops sdhci_esdhc_ops = {
.read_l = esdhc_readl,
.read_w = esdhc_readw,
.read_b = esdhc_readb,
.write_l = sdhci_be32bs_writel,
.write_w = esdhc_writew,
.write_b = esdhc_writeb,
.set_clock = esdhc_of_set_clock,
.enable_dma = esdhc_of_enable_dma,
.get_max_clock = esdhc_of_get_max_clock,
.get_min_clock = esdhc_of_get_min_clock,
#ifdef CONFIG_PM
.platform_suspend = esdhc_of_suspend,
.platform_resume = esdhc_of_resume,
#endif
};
static struct sdhci_pltfm_data sdhci_esdhc_pdata = {
/*
* card detection could be handled via GPIO
* eSDHC cannot support End Attribute in NOP ADMA descriptor
*/
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
| SDHCI_QUIRK_NO_CARD_NO_RESET
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.ops = &sdhci_esdhc_ops,
};
static int __devinit sdhci_esdhc_probe(struct platform_device *pdev)
{
return sdhci_pltfm_register(pdev, &sdhci_esdhc_pdata);
}
static int __devexit sdhci_esdhc_remove(struct platform_device *pdev)
{
return sdhci_pltfm_unregister(pdev);
}
static const struct of_device_id sdhci_esdhc_of_match[] = {
{ .compatible = "fsl,mpc8379-esdhc" },
{ .compatible = "fsl,mpc8536-esdhc" },
{ .compatible = "fsl,esdhc" },
{ }
};
MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
static struct platform_driver sdhci_esdhc_driver = {
.driver = {
.name = "sdhci-esdhc",
.owner = THIS_MODULE,
.of_match_table = sdhci_esdhc_of_match,
.pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_esdhc_probe,
.remove = __devexit_p(sdhci_esdhc_remove),
};
module_platform_driver(sdhci_esdhc_driver);
MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
"Anton Vorontsov <avorontsov@ru.mvista.com>");
MODULE_LICENSE("GPL v2");
