/*
* $Id: saa7134-dvb.c,v 1.12 2005/02/18 12:28:29 kraxel Exp $
*
* (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/suspend.h>
#include "saa7134-reg.h"
#include "saa7134.h"
#include "dvb-pll.h"
#include "mt352.h"
#include "mt352_priv.h" /* FIXME */
#include "tda1004x.h"
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
static unsigned int antenna_pwr = 0;
module_param(antenna_pwr, int, 0444);
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
/* ------------------------------------------------------------------ */
static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
{
u32 ok;
if (!on) {
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
return 0;
}
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
udelay(10);
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28));
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
udelay(10);
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
udelay(10);
ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
printk("%s: %s %s\n", dev->name, __FUNCTION__,
ok ? "on" : "off");
if (!ok)
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
return ok;
}
static int mt352_pinnacle_init(struct dvb_frontend* fe)
{
static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 };
static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 };
static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f };
static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d };
static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
struct saa7134_dev *dev= fe->dvb->priv;
printk("%s: %s called\n",dev->name,__FUNCTION__);
mt352_write(fe, clock_config, sizeof(clock_config));
udelay(200);
mt352_write(fe, reset, sizeof(reset));
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
mt352_write(fe, irq_cfg, sizeof(irq_cfg));
return 0;
}
static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params,
u8* pllbuf)
{
static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
struct saa7134_dev *dev = fe->dvb->priv;
struct v4l2_frequency f;
/* set frequency (mt2050) */
f.tuner = 0;
f.type = V4L2_TUNER_DIGITAL_TV;
f.frequency = params->frequency / 1000 * 16 / 1000;
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
pinnacle_antenna_pwr(dev, antenna_pwr);
/* mt352 setup */
mt352_pinnacle_init(fe);
pllbuf[0] = 0xc2;
pllbuf[1] = 0x00;
pllbuf[2] = 0x00;
pllbuf[3] = 0x80;
pllbuf[4] = 0x00;
return 0;
}
static struct mt352_config pinnacle_300i = {
.demod_address = 0x3c >> 1,
.adc_clock = 20333,
.if2 = 36150,
.no_tuner = 1,
.demod_init = mt352_pinnacle_init,
.pll_set = mt352_pinnacle_pll_set,
};
/* ------------------------------------------------------------------ */
static int medion_cardbus_init(struct dvb_frontend* fe)
{
/* anything to do here ??? */
return 0;
}
static int medion_cardbus_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct v4l2_frequency f;
/*
* this instructs tuner.o to set the frequency, the call will
* end up in tuner_command(), VIDIOC_S_FREQUENCY switch.
* tda9887.o will see that as well.
*/
f.tuner = 0;
f.type = V4L2_TUNER_DIGITAL_TV;
f.frequency = params->frequency / 1000 * 16 / 1000;
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
return 0;
}
static int fe_request_firmware(struct dvb_frontend* fe,
const struct firmware **fw, char* name)
{
struct saa7134_dev *dev = fe->dvb->priv;
return request_firmware(fw, name, &dev->pci->dev);
}
struct tda1004x_config medion_cardbus = {
.demod_address = 0x08, /* not sure this is correct */
.invert = 0,
.invert_oclk = 0,
.pll_init = medion_cardbus_init,
.pll_set = medion_cardbus_pll_set,
.request_firmware = fe_request_firmware,
};
/* ------------------------------------------------------------------ */
static int dvb_init(struct saa7134_dev *dev)
{
/* init struct videobuf_dvb */
dev->ts.nr_bufs = 32;
dev->ts.nr_packets = 32*4;
dev->dvb.name = dev->name;
videobuf_queue_init(&dev->dvb.dvbq, &saa7134_ts_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_ALTERNATE,
sizeof(struct saa7134_buf),
dev);
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
printk("%s: pinnacle 300i dvb setup\n",dev->name);
dev->dvb.frontend = mt352_attach(&pinnacle_300i,
&dev->i2c_adap);
break;
case SAA7134_BOARD_MD7134:
dev->dvb.frontend = tda10046_attach(&medion_cardbus,
&dev->i2c_adap);
if (NULL == dev->dvb.frontend)
printk("%s: Hmm, looks like this is the old MD7134 "
"version without DVB-T support\n",dev->name);
break;
default:
printk("%s: Huh? unknown DVB card?\n",dev->name);
break;
}
if (NULL == dev->dvb.frontend) {
printk("%s: frontend initialization failed\n",dev->name);
return -1;
}
/* register everything else */
return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev);
}
static int dvb_fini(struct saa7134_dev *dev)
{
static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
printk("%s: %s\n",dev->name,__FUNCTION__);
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
/* otherwise we don't detect the tuner on next insmod */
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
break;
};
videobuf_dvb_unregister(&dev->dvb);
return 0;
}
static struct saa7134_mpeg_ops dvb_ops = {
.type = SAA7134_MPEG_DVB,
.init = dvb_init,
.fini = dvb_fini,
};
static int __init dvb_register(void)
{
return saa7134_ts_register(&dvb_ops);
}
static void __exit dvb_unregister(void)
{
saa7134_ts_unregister(&dvb_ops);
}
module_init(dvb_register);
module_exit(dvb_unregister);
/* ------------------------------------------------------------------ */
/*
* Local variables:
* c-basic-offset: 8
* End:
*/
