/* SF16FMR2 radio driver for Linux radio support
* heavily based on fmi driver...
* (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com
*
* Notes on the hardware
*
* Frequency control is done digitally -- ie out(port,encodefreq(95.8));
* No volume control - only mute/unmute - you have to use line volume
*
* For read stereo/mono you must wait 0.1 sec after set frequency and
* card unmuted so I set frequency on unmute
* Signal handling seem to work only on autoscanning (not implemented)
*
* Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
*/
#include <linux/module.h> /* Modules */
#include <linux/init.h> /* Initdata */
#include <linux/ioport.h> /* request_region */
#include <linux/delay.h> /* udelay */
#include <linux/videodev2.h> /* kernel radio structs */
#include <linux/mutex.h>
#include <linux/version.h> /* for KERNEL_VERSION MACRO */
#include <linux/io.h> /* outb, outb_p */
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
MODULE_AUTHOR("Ziglio Frediano, freddy77@angelfire.com");
MODULE_DESCRIPTION("A driver for the SF16FMR2 radio.");
MODULE_LICENSE("GPL");
static int io = 0x384;
static int radio_nr = -1;
module_param(io, int, 0);
MODULE_PARM_DESC(io, "I/O address of the SF16FMR2 card (should be 0x384, if do not work try 0x284)");
module_param(radio_nr, int, 0);
#define RADIO_VERSION KERNEL_VERSION(0,0,2)
#define AUD_VOL_INDEX 1
#undef DEBUG
//#define DEBUG 1
#ifdef DEBUG
# define debug_print(s) printk s
#else
# define debug_print(s)
#endif
/* this should be static vars for module size */
struct fmr2
{
struct v4l2_device v4l2_dev;
struct video_device vdev;
struct mutex lock;
int io;
int curvol; /* 0-15 */
int mute;
int stereo; /* card is producing stereo audio */
unsigned long curfreq; /* freq in kHz */
int card_type;
};
static struct fmr2 fmr2_card;
/* hw precision is 12.5 kHz
* It is only useful to give freq in interval of 200 (=0.0125Mhz),
* other bits will be truncated
*/
#define RSF16_ENCODE(x) ((x) / 200 + 856)
#define RSF16_MINFREQ (87 * 16000)
#define RSF16_MAXFREQ (108 * 16000)
static inline void wait(int n, int io)
{
for (; n; --n)
inb(io);
}
static void outbits(int bits, unsigned int data, int nWait, int io)
{
int bit;
for (; --bits >= 0;) {
bit = (data >> bits) & 1;
outb(bit, io);
wait(nWait, io);
outb(bit | 2, io);
wait(nWait, io);
outb(bit, io);
wait(nWait, io);
}
}
static inline void fmr2_mute(int io)
{
outb(0x00, io);
wait(4, io);
}
static inline void fmr2_unmute(int io)
{
outb(0x04, io);
wait(4, io);
}
static inline int fmr2_stereo_mode(int io)
{
int n = inb(io);
outb(6, io);
inb(io);
n = ((n >> 3) & 1) ^ 1;
debug_print((KERN_DEBUG "stereo: %d\n", n));
return n;
}
static int fmr2_product_info(struct fmr2 *dev)
{
int n = inb(dev->io);
n &= 0xC1;
if (n == 0) {
/* this should support volume set */
dev->card_type = 12;
return 0;
}
/* not volume (mine is 11) */
dev->card_type = (n == 128) ? 11 : 0;
return n;
}
static inline int fmr2_getsigstr(struct fmr2 *dev)
{
/* !!! works only if scanning freq */
int res = 0xffff;
outb(5, dev->io);
wait(4, dev->io);
if (!(inb(dev->io) & 1))
res = 0;
debug_print((KERN_DEBUG "signal: %d\n", res));
return res;
}
/* set frequency and unmute card */
static int fmr2_setfreq(struct fmr2 *dev)
{
unsigned long freq = dev->curfreq;
fmr2_mute(dev->io);
/* 0x42 for mono output
* 0x102 forward scanning
* 0x182 scansione avanti
*/
outbits(9, 0x2, 3, dev->io);
outbits(16, RSF16_ENCODE(freq), 2, dev->io);
fmr2_unmute(dev->io);
/* wait 0.11 sec */
msleep(110);
/* NOTE if mute this stop radio
you must set freq on unmute */
dev->stereo = fmr2_stereo_mode(dev->io);
return 0;
}
/* !!! not tested, in my card this does't work !!! */
static int fmr2_setvolume(struct fmr2 *dev)
{
int vol[16] = { 0x021, 0x084, 0x090, 0x104,
0x110, 0x204, 0x210, 0x402,
0x404, 0x408, 0x410, 0x801,
0x802, 0x804, 0x808, 0x810 };
int i, a;
int n = vol[dev->curvol & 0x0f];
if (dev->card_type != 11)
return 1;
for (i = 12; --i >= 0; ) {
a = ((n >> i) & 1) << 6; /* if (a==0) a = 0; else a = 0x40; */
outb(a | 4, dev->io);
wait(4, dev->io);
outb(a | 0x24, dev->io);
wait(4, dev->io);
outb(a | 4, dev->io);
wait(4, dev->io);
}
for (i = 6; --i >= 0; ) {
a = ((0x18 >> i) & 1) << 6;
outb(a | 4, dev->io);
wait(4, dev->io);
outb(a | 0x24, dev->io);
wait(4, dev->io);
outb(a | 4, dev->io);
wait(4, dev->io);
}
wait(4, dev->io);
outb(0x14, dev->io);
return 0;
}
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *v)
{
strlcpy(v->driver, "radio-sf16fmr2", sizeof(v->driver));
strlcpy(v->card, "SF16-FMR2 radio", sizeof(v->card));
strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
v->version = RADIO_VERSION;
v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
return 0;
}
static int vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
struct fmr2 *fmr2 = video_drvdata(file);
if (v->index > 0)
return -EINVAL;
strlcpy(v->name, "FM", sizeof(v->name));
v->type = V4L2_TUNER_RADIO;
v->rangelow = RSF16_MINFREQ;
v->rangehigh = RSF16_MAXFREQ;
v->rxsubchans = fmr2->stereo ? V4L2_TUNER_SUB_STEREO :
V4L2_TUNER_SUB_MONO;
v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
v->audmode = V4L2_TUNER_MODE_STEREO;
mutex_lock(&fmr2->lock);
v->signal = fmr2_getsigstr(fmr2);
mutex_unlock(&fmr2->lock);
return 0;
}
static int vidioc_s_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
return v->index ? -EINVAL : 0;
}
static int vidioc_s_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct fmr2 *fmr2 = video_drvdata(file);
if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
return -EINVAL;
if (f->frequency < RSF16_MINFREQ ||
f->frequency > RSF16_MAXFREQ)
return -EINVAL;
/* rounding in steps of 200 to match the freq
that will be used */
fmr2->curfreq = (f->frequency / 200) * 200;
/* set card freq (if not muted) */
if (fmr2->curvol && !fmr2->mute) {
mutex_lock(&fmr2->lock);
fmr2_setfreq(fmr2);
mutex_unlock(&fmr2->lock);
}
return 0;
}
static int vidioc_g_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct fmr2 *fmr2 = video_drvdata(file);
if (f->tuner != 0)
return -EINVAL;
f->type = V4L2_TUNER_RADIO;
f->frequency = fmr2->curfreq;
return 0;
}
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qc)
{
struct fmr2 *fmr2 = video_drvdata(file);
switch (qc->id) {
case V4L2_CID_AUDIO_MUTE:
return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
case V4L2_CID_AUDIO_VOLUME:
/* Only card_type == 11 implements volume */
if (fmr2->card_type == 11)
return v4l2_ctrl_query_fill(qc, 0, 15, 1, 0);
return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
}
return -EINVAL;
}
static int vidioc_g_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct fmr2 *fmr2 = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
ctrl->value = fmr2->mute;
return 0;
case V4L2_CID_AUDIO_VOLUME:
ctrl->value = fmr2->curvol;
return 0;
}
return -EINVAL;
}
static int vidioc_s_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct fmr2 *fmr2 = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
fmr2->mute = ctrl->value;
break;
case V4L2_CID_AUDIO_VOLUME:
fmr2->curvol = ctrl->value;
break;
default:
return -EINVAL;
}
#ifdef DEBUG
if (fmr2->curvol && !fmr2->mute)
printk(KERN_DEBUG "unmute\n");
else
printk(KERN_DEBUG "mute\n");
#endif
mutex_lock(&fmr2->lock);
if (fmr2->curvol && !fmr2->mute) {
fmr2_setvolume(fmr2);
/* Set frequency and unmute card */
fmr2_setfreq(fmr2);
} else
fmr2_mute(fmr2->io);
mutex_unlock(&fmr2->lock);
return 0;
}
static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
{
*i = 0;
return 0;
}
static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
{
return i ? -EINVAL : 0;
}
static int vidioc_g_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
a->index = 0;
strlcpy(a->name, "Radio", sizeof(a->name));
a->capability = V4L2_AUDCAP_STEREO;
return 0;
}
static int vidioc_s_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
return a->index ? -EINVAL : 0;
}
static const struct v4l2_file_operations fmr2_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
.vidioc_querycap = vidioc_querycap,
.vidioc_g_tuner = vidioc_g_tuner,
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
};
static int __init fmr2_init(void)
{
struct fmr2 *fmr2 = &fmr2_card;
struct v4l2_device *v4l2_dev = &fmr2->v4l2_dev;
int res;
strlcpy(v4l2_dev->name, "sf16fmr2", sizeof(v4l2_dev->name));
fmr2->io = io;
fmr2->stereo = 1;
mutex_init(&fmr2->lock);
if (!request_region(fmr2->io, 2, "sf16fmr2")) {
v4l2_err(v4l2_dev, "request_region failed!\n");
return -EBUSY;
}
res = v4l2_device_register(NULL, v4l2_dev);
if (res < 0) {
release_region(fmr2->io, 2);
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
return res;
}
strlcpy(fmr2->vdev.name, v4l2_dev->name, sizeof(fmr2->vdev.name));
fmr2->vdev.v4l2_dev = v4l2_dev;
fmr2->vdev.fops = &fmr2_fops;
fmr2->vdev.ioctl_ops = &fmr2_ioctl_ops;
fmr2->vdev.release = video_device_release_empty;
video_set_drvdata(&fmr2->vdev, fmr2);
/* mute card - prevents noisy bootups */
fmr2_mute(fmr2->io);
fmr2_product_info(fmr2);
if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
release_region(fmr2->io, 2);
return -EINVAL;
}
v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io);
debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type));
return 0;
}
static void __exit fmr2_exit(void)
{
struct fmr2 *fmr2 = &fmr2_card;
video_unregister_device(&fmr2->vdev);
v4l2_device_unregister(&fmr2->v4l2_dev);
release_region(fmr2->io, 2);
}
module_init(fmr2_init);
module_exit(fmr2_exit);
#ifndef MODULE
static int __init fmr2_setup_io(char *str)
{
get_option(&str, &io);
return 1;
}
__setup("sf16fmr2=", fmr2_setup_io);
#endif