|
|
/* DVB USB compliant Linux driver for the
* - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
*
* Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
* Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
*
* Thanks to GENPIX for the sample code used to implement this module.
*
* This module is based off the vp7045 and vp702x modules
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
#ifndef _DVB_USB_GP8PSK_H_
#define _DVB_USB_GP8PSK_H_
#define DVB_USB_LOG_PREFIX "gp8psk"
#include "dvb-usb.h"
extern int dvb_usb_gp8psk_debug;
#define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args)
#define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args)
#define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args)
#define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args)
/* gp8psk commands */
/* Twinhan Vendor requests */
#define TH_COMMAND_IN 0xC0
#define TH_COMMAND_OUT 0xC1
/* gp8psk commands */
#define GET_8PSK_CONFIG 0x80 /* in */
#define SET_8PSK_CONFIG 0x81
#define I2C_WRITE 0x83
#define I2C_READ 0x84
#define ARM_TRANSFER 0x85
#define TUNE_8PSK 0x86
#define GET_SIGNAL_STRENGTH 0x87 /* in */
#define LOAD_BCM4500 0x88
#define BOOT_8PSK 0x89 /* in */
#define START_INTERSIL 0x8A /* in */
#define SET_LNB_VOLTAGE 0x8B
#define SET_22KHZ_TONE 0x8C
#define SEND_DISEQC_COMMAND 0x8D
#define SET_DVB_MODE 0x8E
#define SET_DN_SWITCH 0x8F
#define GET_SIGNAL_LOCK 0x90 /* in */
#define GET_SERIAL_NUMBER 0x93 /* in */
#define USE_EXTRA_VOLT 0x94
#define CW3K_INIT 0x9d
/* PSK_configuration bits */
#define bm8pskStarted 0x01
#define bm8pskFW_Loaded 0x02
#define bmIntersilOn 0x04
#define bmDVBmode 0x08
#define bm22kHz 0x10
#define bmSEL18V 0x20
#define bmDCtuned 0x40
#define bmArmed 0x80
/* Satellite modulation modes */
#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */
#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */
#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */
#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */
#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */
#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */
#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */
#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */
#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */
#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */
#define GET_USB_SPEED 0x07
#define USB_SPEED_LOW 0
#define USB_SPEED_FULL 1
#define USB_SPEED_HIGH 2
#define RESET_FX2 0x13
#define FW_VERSION_READ 0x0B
#define VENDOR_STRING_READ 0x0C
#define PRODUCT_STRING_READ 0x0D
#define FW_BCD_VERSION_READ 0x14
extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
u16 index, u8 *b, int blen);
#endif
|
