/*
* hfcsusb.h, HFC-S USB mISDN driver
*/
#ifndef __HFCSUSB_H__
#define __HFCSUSB_H__
#define DRIVER_NAME "HFC-S_USB"
#define DBG_HFC_CALL_TRACE 0x00010000
#define DBG_HFC_FIFO_VERBOSE 0x00020000
#define DBG_HFC_USB_VERBOSE 0x00100000
#define DBG_HFC_URB_INFO 0x00200000
#define DBG_HFC_URB_ERROR 0x00400000
#define DEFAULT_TRANSP_BURST_SZ 128
#define HFC_CTRL_TIMEOUT 20 /* 5ms timeout writing/reading regs */
#define CLKDEL_TE 0x0f /* CLKDEL in TE mode */
#define CLKDEL_NT 0x6c /* CLKDEL in NT mode */
/* hfcsusb Layer1 commands */
#define HFC_L1_ACTIVATE_TE 1
#define HFC_L1_ACTIVATE_NT 2
#define HFC_L1_DEACTIVATE_NT 3
#define HFC_L1_FORCE_DEACTIVATE_TE 4
/* cmd FLAGS in HFCUSB_STATES register */
#define HFCUSB_LOAD_STATE 0x10
#define HFCUSB_ACTIVATE 0x20
#define HFCUSB_DO_ACTION 0x40
#define HFCUSB_NT_G2_G3 0x80
/* timers */
#define NT_ACTIVATION_TIMER 0x01 /* enables NT mode activation Timer */
#define NT_T1_COUNT 10
#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */
#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */
#define HFCUSB_TX_THRESHOLD 96 /* threshold for fifo report bit tx */
#define HFCUSB_CHIP_ID 0x16 /* Chip ID register index */
#define HFCUSB_CIRM 0x00 /* cirm register index */
#define HFCUSB_USB_SIZE 0x07 /* int length register */
#define HFCUSB_USB_SIZE_I 0x06 /* iso length register */
#define HFCUSB_F_CROSS 0x0b /* bit order register */
#define HFCUSB_CLKDEL 0x37 /* bit delay register */
#define HFCUSB_CON_HDLC 0xfa /* channel connect register */
#define HFCUSB_HDLC_PAR 0xfb
#define HFCUSB_SCTRL 0x31 /* S-bus control register (tx) */
#define HFCUSB_SCTRL_E 0x32 /* same for E and special funcs */
#define HFCUSB_SCTRL_R 0x33 /* S-bus control register (rx) */
#define HFCUSB_F_THRES 0x0c /* threshold register */
#define HFCUSB_FIFO 0x0f /* fifo select register */
#define HFCUSB_F_USAGE 0x1a /* fifo usage register */
#define HFCUSB_MST_MODE0 0x14
#define HFCUSB_MST_MODE1 0x15
#define HFCUSB_P_DATA 0x1f
#define HFCUSB_INC_RES_F 0x0e
#define HFCUSB_B1_SSL 0x20
#define HFCUSB_B2_SSL 0x21
#define HFCUSB_B1_RSL 0x24
#define HFCUSB_B2_RSL 0x25
#define HFCUSB_STATES 0x30
#define HFCUSB_CHIPID 0x40 /* ID value of HFC-S USB */
/* fifo registers */
#define HFCUSB_NUM_FIFOS 8 /* maximum number of fifos */
#define HFCUSB_B1_TX 0 /* index for B1 transmit bulk/int */
#define HFCUSB_B1_RX 1 /* index for B1 receive bulk/int */
#define HFCUSB_B2_TX 2
#define HFCUSB_B2_RX 3
#define HFCUSB_D_TX 4
#define HFCUSB_D_RX 5
#define HFCUSB_PCM_TX 6
#define HFCUSB_PCM_RX 7
#define USB_INT 0
#define USB_BULK 1
#define USB_ISOC 2
#define ISOC_PACKETS_D 8
#define ISOC_PACKETS_B 8
#define ISO_BUFFER_SIZE 128
/* defines how much ISO packets are handled in one URB */
static int iso_packets[8] =
{ ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B,
ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D
};
/* Fifo flow Control for TX ISO */
#define SINK_MAX 68
#define SINK_MIN 48
#define SINK_DMIN 12
#define SINK_DMAX 18
#define BITLINE_INF (-96 * 8)
/* HFC-S USB register access by Control-URSs */
#define write_reg_atomic(a, b, c) \
usb_control_msg((a)->dev, (a)->ctrl_out_pipe, 0, 0x40, (c), (b), \
0, 0, HFC_CTRL_TIMEOUT)
#define read_reg_atomic(a, b, c) \
usb_control_msg((a)->dev, (a)->ctrl_in_pipe, 1, 0xC0, 0, (b), (c), \
1, HFC_CTRL_TIMEOUT)
#define HFC_CTRL_BUFSIZE 64
struct ctrl_buf {
__u8 hfcs_reg; /* register number */
__u8 reg_val; /* value to be written (or read) */
};
/*
* URB error codes
* Used to represent a list of values and their respective symbolic names
*/
struct hfcusb_symbolic_list {
const int num;
const char *name;
};
static struct hfcusb_symbolic_list urb_errlist[] = {
{-ENOMEM, "No memory for allocation of internal structures"},
{-ENOSPC, "The host controller's bandwidth is already consumed"},
{-ENOENT, "URB was canceled by unlink_urb"},
{-EXDEV, "ISO transfer only partially completed"},
{-EAGAIN, "Too match scheduled for the future"},
{-ENXIO, "URB already queued"},
{-EFBIG, "Too much ISO frames requested"},
{-ENOSR, "Buffer error (overrun)"},
{-EPIPE, "Specified endpoint is stalled (device not responding)"},
{-EOVERFLOW, "Babble (bad cable?)"},
{-EPROTO, "Bit-stuff error (bad cable?)"},
{-EILSEQ, "CRC/Timeout"},
{-ETIMEDOUT, "NAK (device does not respond)"},
{-ESHUTDOWN, "Device unplugged"},
{-1, NULL}
};
static inline const char *
symbolic(struct hfcusb_symbolic_list list[], const int num)
{
int i;
for (i = 0; list[i].name != NULL; i++)
if (list[i].num == num)
return list[i].name;
return "<unknown USB Error>";
}
/* USB descriptor need to contain one of the following EndPoint combination: */
#define CNF_4INT3ISO 1 /* 4 INT IN, 3 ISO OUT */
#define CNF_3INT3ISO 2 /* 3 INT IN, 3 ISO OUT */
#define CNF_4ISO3ISO 3 /* 4 ISO IN, 3 ISO OUT */
#define CNF_3ISO3ISO 4 /* 3 ISO IN, 3 ISO OUT */
#define EP_NUL 1 /* Endpoint at this position not allowed */
#define EP_NOP 2 /* all type of endpoints allowed at this position */
#define EP_ISO 3 /* Isochron endpoint mandatory at this position */
#define EP_BLK 4 /* Bulk endpoint mandatory at this position */
#define EP_INT 5 /* Interrupt endpoint mandatory at this position */
#define HFC_CHAN_B1 0
#define HFC_CHAN_B2 1
#define HFC_CHAN_D 2
#define HFC_CHAN_E 3
/*
* List of all supported enpoints configiration sets, used to find the
* best matching endpoint configuration within a devices' USB descriptor.
* We need at least 3 RX endpoints, and 3 TX endpoints, either
* INT-in and ISO-out, or ISO-in and ISO-out)
* with 4 RX endpoints even E-Channel logging is possible
*/
static int
validconf[][19] = {
/* INT in, ISO out config */
{EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NOP, EP_INT,
EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
CNF_4INT3ISO, 2, 1},
{EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_NUL,
EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
CNF_3INT3ISO, 2, 0},
/* ISO in, ISO out config */
{EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP,
EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NOP, EP_ISO,
CNF_4ISO3ISO, 2, 1},
{EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL,
EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NUL, EP_NUL,
CNF_3ISO3ISO, 2, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* EOL element */
};
/* string description of chosen config */
static char *conf_str[] = {
"4 Interrupt IN + 3 Isochron OUT",
"3 Interrupt IN + 3 Isochron OUT",
"4 Isochron IN + 3 Isochron OUT",
"3 Isochron IN + 3 Isochron OUT"
};
#define LED_OFF 0 /* no LED support */
#define LED_SCHEME1 1 /* LED standard scheme */
#define LED_SCHEME2 2 /* not used yet... */
#define LED_POWER_ON 1
#define LED_POWER_OFF 2
#define LED_S0_ON 3
#define LED_S0_OFF 4
#define LED_B1_ON 5
#define LED_B1_OFF 6
#define LED_B1_DATA 7
#define LED_B2_ON 8
#define LED_B2_OFF 9
#define LED_B2_DATA 10
#define LED_NORMAL 0 /* LEDs are normal */
#define LED_INVERTED 1 /* LEDs are inverted */
/* time in ms to perform a Flashing LED when B-Channel has traffic */
#define LED_TIME 250
struct hfcsusb;
struct usb_fifo;
/* structure defining input+output fifos (interrupt/bulk mode) */
struct iso_urb {
struct urb *urb;
__u8 buffer[ISO_BUFFER_SIZE]; /* buffer rx/tx USB URB data */
struct usb_fifo *owner_fifo; /* pointer to owner fifo */
__u8 indx; /* Fifos's ISO double buffer 0 or 1 ? */
#ifdef ISO_FRAME_START_DEBUG
int start_frames[ISO_FRAME_START_RING_COUNT];
__u8 iso_frm_strt_pos; /* index in start_frame[] */
#endif
};
struct usb_fifo {
int fifonum; /* fifo index attached to this structure */
int active; /* fifo is currently active */
struct hfcsusb *hw; /* pointer to main structure */
int pipe; /* address of endpoint */
__u8 usb_packet_maxlen; /* maximum length for usb transfer */
unsigned int max_size; /* maximum size of receive/send packet */
__u8 intervall; /* interrupt interval */
struct urb *urb; /* transfer structure for usb routines */
__u8 buffer[128]; /* buffer USB INT OUT URB data */
int bit_line; /* how much bits are in the fifo? */
__u8 usb_transfer_mode; /* switched between ISO and INT */
struct iso_urb iso[2]; /* two urbs to have one always
one pending */
struct dchannel *dch; /* link to hfcsusb_t->dch */
struct bchannel *bch; /* link to hfcsusb_t->bch */
struct dchannel *ech; /* link to hfcsusb_t->ech, TODO: E-CHANNEL */
int last_urblen; /* remember length of last packet */
__u8 stop_gracefull; /* stops URB retransmission */
};
struct hfcsusb {
struct list_head list;
struct dchannel dch;
struct bchannel bch[2];
struct dchannel ech; /* TODO : wait for struct echannel ;) */
struct usb_device *dev; /* our device */
struct usb_interface *intf; /* used interface */
int if_used; /* used interface number */
int alt_used; /* used alternate config */
int cfg_used; /* configuration index used */
int vend_idx; /* index in hfcsusb_idtab */
int packet_size;
int iso_packet_size;
struct usb_fifo fifos[HFCUSB_NUM_FIFOS];
/* control pipe background handling */
struct ctrl_buf ctrl_buff[HFC_CTRL_BUFSIZE];
int ctrl_in_idx, ctrl_out_idx, ctrl_cnt;
struct urb *ctrl_urb;
struct usb_ctrlrequest ctrl_write;
struct usb_ctrlrequest ctrl_read;
int ctrl_paksize;
int ctrl_in_pipe, ctrl_out_pipe;
spinlock_t ctrl_lock; /* lock for ctrl */
spinlock_t lock;
__u8 threshold_mask;
__u8 led_state;
__u8 protocol;
int nt_timer;
int open;
__u8 timers;
__u8 initdone;
char name[MISDN_MAX_IDLEN];
};
/* private vendor specific data */
struct hfcsusb_vdata {
__u8 led_scheme; /* led display scheme */
signed short led_bits[8]; /* array of 8 possible LED bitmask */
char *vend_name; /* device name */
};
#define HFC_MAX_TE_LAYER1_STATE 8
#define HFC_MAX_NT_LAYER1_STATE 4
static const char *HFC_TE_LAYER1_STATES[HFC_MAX_TE_LAYER1_STATE + 1] = {
"TE F0 - Reset",
"TE F1 - Reset",
"TE F2 - Sensing",
"TE F3 - Deactivated",
"TE F4 - Awaiting signal",
"TE F5 - Identifying input",
"TE F6 - Synchronized",
"TE F7 - Activated",
"TE F8 - Lost framing",
};
static const char *HFC_NT_LAYER1_STATES[HFC_MAX_NT_LAYER1_STATE + 1] = {
"NT G0 - Reset",
"NT G1 - Deactive",
"NT G2 - Pending activation",
"NT G3 - Active",
"NT G4 - Pending deactivation",
};
/* supported devices */
static struct usb_device_id hfcsusb_idtab[] = {
{
USB_DEVICE(0x0959, 0x2bd0),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_OFF, {4, 0, 2, 1},
"ISDN USB TA (Cologne Chip HFC-S USB based)"}),
},
{
USB_DEVICE(0x0675, 0x1688),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {1, 2, 0, 0},
"DrayTek miniVigor 128 USB ISDN TA"}),
},
{
USB_DEVICE(0x07b0, 0x0007),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Billion tiny USB ISDN TA 128"}),
},
{
USB_DEVICE(0x0742, 0x2008),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {4, 0, 2, 1},
"Stollmann USB TA"}),
},
{
USB_DEVICE(0x0742, 0x2009),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {4, 0, 2, 1},
"Aceex USB ISDN TA"}),
},
{
USB_DEVICE(0x0742, 0x200A),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {4, 0, 2, 1},
"OEM USB ISDN TA"}),
},
{
USB_DEVICE(0x08e3, 0x0301),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {2, 0, 1, 4},
"Olitec USB RNIS"}),
},
{
USB_DEVICE(0x07fa, 0x0846),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Bewan Modem RNIS USB"}),
},
{
USB_DEVICE(0x07fa, 0x0847),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Djinn Numeris USB"}),
},
{
USB_DEVICE(0x07b0, 0x0006),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Twister ISDN TA"}),
},
{
USB_DEVICE(0x071d, 0x1005),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {0x02, 0, 0x01, 0x04},
"Eicon DIVA USB 4.0"}),
},
{
USB_DEVICE(0x0586, 0x0102),
.driver_info = (unsigned long) &((struct hfcsusb_vdata)
{LED_SCHEME1, {0x88, -64, -32, -16},
"ZyXEL OMNI.NET USB II"}),
},
{ }
};
MODULE_DEVICE_TABLE(usb, hfcsusb_idtab);
#endif /* __HFCSUSB_H__ */
