/*
* Copyright (c) 2012 Intel Corporation. All rights reserved.
* Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include "qib.h"
/*
* Functions specific to the serial EEPROM on cards handled by ib_qib.
* The actual serail interface code is in qib_twsi.c. This file is a client
*/
/**
* qib_eeprom_read - receives bytes from the eeprom via I2C
* @dd: the qlogic_ib device
* @eeprom_offset: address to read from
* @buffer: where to store result
* @len: number of bytes to receive
*/
int qib_eeprom_read(struct qib_devdata *dd, u8 eeprom_offset,
void *buff, int len)
{
int ret;
ret = mutex_lock_interruptible(&dd->eep_lock);
if (!ret) {
ret = qib_twsi_reset(dd);
if (ret)
qib_dev_err(dd, "EEPROM Reset for read failed\n");
else
ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev,
eeprom_offset, buff, len);
mutex_unlock(&dd->eep_lock);
}
return ret;
}
/*
* Actually update the eeprom, first doing write enable if
* needed, then restoring write enable state.
* Must be called with eep_lock held
*/
static int eeprom_write_with_enable(struct qib_devdata *dd, u8 offset,
const void *buf, int len)
{
int ret, pwen;
pwen = dd->f_eeprom_wen(dd, 1);
ret = qib_twsi_reset(dd);
if (ret)
qib_dev_err(dd, "EEPROM Reset for write failed\n");
else
ret = qib_twsi_blk_wr(dd, dd->twsi_eeprom_dev,
offset, buf, len);
dd->f_eeprom_wen(dd, pwen);
return ret;
}
/**
* qib_eeprom_write - writes data to the eeprom via I2C
* @dd: the qlogic_ib device
* @eeprom_offset: where to place data
* @buffer: data to write
* @len: number of bytes to write
*/
int qib_eeprom_write(struct qib_devdata *dd, u8 eeprom_offset,
const void *buff, int len)
{
int ret;
ret = mutex_lock_interruptible(&dd->eep_lock);
if (!ret) {
ret = eeprom_write_with_enable(dd, eeprom_offset, buff, len);
mutex_unlock(&dd->eep_lock);
}
return ret;
}
static u8 flash_csum(struct qib_flash *ifp, int adjust)
{
u8 *ip = (u8 *) ifp;
u8 csum = 0, len;
/*
* Limit length checksummed to max length of actual data.
* Checksum of erased eeprom will still be bad, but we avoid
* reading past the end of the buffer we were passed.
*/
len = ifp->if_length;
if (len > sizeof(struct qib_flash))
len = sizeof(struct qib_flash);
while (len--)
csum += *ip++;
csum -= ifp->if_csum;
csum = ~csum;
if (adjust)
ifp->if_csum = csum;
return csum;
}
/**
* qib_get_eeprom_info- get the GUID et al. from the TSWI EEPROM device
* @dd: the qlogic_ib device
*
* We have the capability to use the nguid field, and get
* the guid from the first chip's flash, to use for all of them.
*/
void qib_get_eeprom_info(struct qib_devdata *dd)
{
void *buf;
struct qib_flash *ifp;
__be64 guid;
int len, eep_stat;
u8 csum, *bguid;
int t = dd->unit;
struct qib_devdata *dd0 = qib_lookup(0);
if (t && dd0->nguid > 1 && t <= dd0->nguid) {
u8 oguid;
dd->base_guid = dd0->base_guid;
bguid = (u8 *) &dd->base_guid;
oguid = bguid[7];
bguid[7] += t;
if (oguid > bguid[7]) {
if (bguid[6] == 0xff) {
if (bguid[5] == 0xff) {
qib_dev_err(dd,
"Can't set %s GUID from base, wraps to OUI!\n",
qib_get_unit_name(t));
dd->base_guid = 0;
goto bail;
}
bguid[5]++;
}
bguid[6]++;
}
dd->nguid = 1;
goto bail;
}
/*
* Read full flash, not just currently used part, since it may have
* been written with a newer definition.
* */
len = sizeof(struct qib_flash);
buf = vmalloc(len);
if (!buf) {
qib_dev_err(dd,
"Couldn't allocate memory to read %u bytes from eeprom for GUID\n",
len);
goto bail;
}
/*
* Use "public" eeprom read function, which does locking and
* figures out device. This will migrate to chip-specific.
*/
eep_stat = qib_eeprom_read(dd, 0, buf, len);
if (eep_stat) {
qib_dev_err(dd, "Failed reading GUID from eeprom\n");
goto done;
}
ifp = (struct qib_flash *)buf;
csum = flash_csum(ifp, 0);
if (csum != ifp->if_csum) {
qib_devinfo(dd->pcidev,
"Bad I2C flash checksum: 0x%x, not 0x%x\n",
csum, ifp->if_csum);
goto done;
}
if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
*(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
qib_dev_err(dd,
"Invalid GUID %llx from flash; ignoring\n",
*(unsigned long long *) ifp->if_guid);
/* don't allow GUID if all 0 or all 1's */
goto done;
}
/* complain, but allow it */
if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
qib_devinfo(dd->pcidev,
"Warning, GUID %llx is default, probably not correct!\n",
*(unsigned long long *) ifp->if_guid);
bguid = ifp->if_guid;
if (!bguid[0] && !bguid[1] && !bguid[2]) {
/*
* Original incorrect GUID format in flash; fix in
* core copy, by shifting up 2 octets; don't need to
* change top octet, since both it and shifted are 0.
*/
bguid[1] = bguid[3];
bguid[2] = bguid[4];
bguid[3] = 0;
bguid[4] = 0;
guid = *(__be64 *) ifp->if_guid;
} else
guid = *(__be64 *) ifp->if_guid;
dd->base_guid = guid;
dd->nguid = ifp->if_numguid;
/*
* Things are slightly complicated by the desire to transparently
* support both the Pathscale 10-digit serial number and the QLogic
* 13-character version.
*/
if ((ifp->if_fversion > 1) && ifp->if_sprefix[0] &&
((u8 *) ifp->if_sprefix)[0] != 0xFF) {
char *snp = dd->serial;
/*
* This board has a Serial-prefix, which is stored
* elsewhere for backward-compatibility.
*/
memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix);
snp[sizeof ifp->if_sprefix] = '\0';
len = strlen(snp);
snp += len;
len = (sizeof dd->serial) - len;
if (len > sizeof ifp->if_serial)
len = sizeof ifp->if_serial;
memcpy(snp, ifp->if_serial, len);
} else
memcpy(dd->serial, ifp->if_serial,
sizeof ifp->if_serial);
if (!strstr(ifp->if_comment, "Tested successfully"))
qib_dev_err(dd,
"Board SN %s did not pass functional test: %s\n",
dd->serial, ifp->if_comment);
memcpy(&dd->eep_st_errs, &ifp->if_errcntp, QIB_EEP_LOG_CNT);
/*
* Power-on (actually "active") hours are kept as little-endian value
* in EEPROM, but as seconds in a (possibly as small as 24-bit)
* atomic_t while running.
*/
atomic_set(&dd->active_time, 0);
dd->eep_hrs = ifp->if_powerhour[0] | (ifp->if_powerhour[1] << 8);
done:
vfree(buf);
bail:;
}
/**
* qib_update_eeprom_log - copy active-time and error counters to eeprom
* @dd: the qlogic_ib device
*
* Although the time is kept as seconds in the qib_devdata struct, it is
* rounded to hours for re-write, as we have only 16 bits in EEPROM.
* First-cut code reads whole (expected) struct qib_flash, modifies,
* re-writes. Future direction: read/write only what we need, assuming
* that the EEPROM had to have been "good enough" for driver init, and
* if not, we aren't making it worse.
*
*/
int qib_update_eeprom_log(struct qib_devdata *dd)
{
void *buf;
struct qib_flash *ifp;
int len, hi_water;
uint32_t new_time, new_hrs;
u8 csum;
int ret, idx;
unsigned long flags;
/* first, check if we actually need to do anything. */
ret = 0;
for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
if (dd->eep_st_new_errs[idx]) {
ret = 1;
break;
}
}
new_time = atomic_read(&dd->active_time);
if (ret == 0 && new_time < 3600)
goto bail;
/*
* The quick-check above determined that there is something worthy
* of logging, so get current contents and do a more detailed idea.
* read full flash, not just currently used part, since it may have
* been written with a newer definition
*/
len = sizeof(struct qib_flash);
buf = vmalloc(len);
ret = 1;
if (!buf) {
qib_dev_err(dd,
"Couldn't allocate memory to read %u bytes from eeprom for logging\n",
len);
goto bail;
}
/* Grab semaphore and read current EEPROM. If we get an
* error, let go, but if not, keep it until we finish write.
*/
ret = mutex_lock_interruptible(&dd->eep_lock);
if (ret) {
qib_dev_err(dd, "Unable to acquire EEPROM for logging\n");
goto free_bail;
}
ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev, 0, buf, len);
if (ret) {
mutex_unlock(&dd->eep_lock);
qib_dev_err(dd, "Unable read EEPROM for logging\n");
goto free_bail;
}
ifp = (struct qib_flash *)buf;
csum = flash_csum(ifp, 0);
if (csum != ifp->if_csum) {
mutex_unlock(&dd->eep_lock);
qib_dev_err(dd, "EEPROM cks err (0x%02X, S/B 0x%02X)\n",
csum, ifp->if_csum);
ret = 1;
goto free_bail;
}
hi_water = 0;
spin_lock_irqsave(&dd->eep_st_lock, flags);
for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
int new_val = dd->eep_st_new_errs[idx];
if (new_val) {
/*
* If we have seen any errors, add to EEPROM values
* We need to saturate at 0xFF (255) and we also
* would need to adjust the checksum if we were
* trying to minimize EEPROM traffic
* Note that we add to actual current count in EEPROM,
* in case it was altered while we were running.
*/
new_val += ifp->if_errcntp[idx];
if (new_val > 0xFF)
new_val = 0xFF;
if (ifp->if_errcntp[idx] != new_val) {
ifp->if_errcntp[idx] = new_val;
hi_water = offsetof(struct qib_flash,
if_errcntp) + idx;
}
/*
* update our shadow (used to minimize EEPROM
* traffic), to match what we are about to write.
*/
dd->eep_st_errs[idx] = new_val;
dd->eep_st_new_errs[idx] = 0;
}
}
/*
* Now update active-time. We would like to round to the nearest hour
* but unless atomic_t are sure to be proper signed ints we cannot,
* because we need to account for what we "transfer" to EEPROM and
* if we log an hour at 31 minutes, then we would need to set
* active_time to -29 to accurately count the _next_ hour.
*/
if (new_time >= 3600) {
new_hrs = new_time / 3600;
atomic_sub((new_hrs * 3600), &dd->active_time);
new_hrs += dd->eep_hrs;
if (new_hrs > 0xFFFF)
new_hrs = 0xFFFF;
dd->eep_hrs = new_hrs;
if ((new_hrs & 0xFF) != ifp->if_powerhour[0]) {
ifp->if_powerhour[0] = new_hrs & 0xFF;
hi_water = offsetof(struct qib_flash, if_powerhour);
}
if ((new_hrs >> 8) != ifp->if_powerhour[1]) {
ifp->if_powerhour[1] = new_hrs >> 8;
hi_water = offsetof(struct qib_flash, if_powerhour) + 1;
}
}
/*
* There is a tiny possibility that we could somehow fail to write
* the EEPROM after updating our shadows, but problems from holding
* the spinlock too long are a much bigger issue.
*/
spin_unlock_irqrestore(&dd->eep_st_lock, flags);
if (hi_water) {
/* we made some change to the data, uopdate cksum and write */
csum = flash_csum(ifp, 1);
ret = eeprom_write_with_enable(dd, 0, buf, hi_water + 1);
}
mutex_unlock(&dd->eep_lock);
if (ret)
qib_dev_err(dd, "Failed updating EEPROM\n");
free_bail:
vfree(buf);
bail:
return ret;
}
/**
* qib_inc_eeprom_err - increment one of the four error counters
* that are logged to EEPROM.
* @dd: the qlogic_ib device
* @eidx: 0..3, the counter to increment
* @incr: how much to add
*
* Each counter is 8-bits, and saturates at 255 (0xFF). They
* are copied to the EEPROM (aka flash) whenever qib_update_eeprom_log()
* is called, but it can only be called in a context that allows sleep.
* This function can be called even at interrupt level.
*/
void qib_inc_eeprom_err(struct qib_devdata *dd, u32 eidx, u32 incr)
{
uint new_val;
unsigned long flags;
spin_lock_irqsave(&dd->eep_st_lock, flags);
new_val = dd->eep_st_new_errs[eidx] + incr;
if (new_val > 255)
new_val = 255;
dd->eep_st_new_errs[eidx] = new_val;
spin_unlock_irqrestore(&dd->eep_st_lock, flags);
}
