/*
* VIA AGPGART routines.
*/
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/agp_backend.h>
#include "agp.h"
static const struct pci_device_id agp_via_pci_table[];
#define VIA_GARTCTRL 0x80
#define VIA_APSIZE 0x84
#define VIA_ATTBASE 0x88
#define VIA_AGP3_GARTCTRL 0x90
#define VIA_AGP3_APSIZE 0x94
#define VIA_AGP3_ATTBASE 0x98
#define VIA_AGPSEL 0xfd
static int via_fetch_size(void)
{
int i;
u8 temp;
struct aper_size_info_8 *values;
values = A_SIZE_8(agp_bridge->driver->aperture_sizes);
pci_read_config_byte(agp_bridge->dev, VIA_APSIZE, &temp);
for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
if (temp == values[i].size_value) {
agp_bridge->previous_size =
agp_bridge->current_size = (void *) (values + i);
agp_bridge->aperture_size_idx = i;
return values[i].size;
}
}
printk(KERN_ERR PFX "Unknown aperture size from AGP bridge (0x%x)\n", temp);
return 0;
}
static int via_configure(void)
{
u32 temp;
struct aper_size_info_8 *current_size;
current_size = A_SIZE_8(agp_bridge->current_size);
/* aperture size */
pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
current_size->size_value);
/* address to map too */
pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
/* GART control register */
pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, 0x0000000f);
/* attbase - aperture GATT base */
pci_write_config_dword(agp_bridge->dev, VIA_ATTBASE,
(agp_bridge->gatt_bus_addr & 0xfffff000) | 3);
return 0;
}
static void via_cleanup(void)
{
struct aper_size_info_8 *previous_size;
previous_size = A_SIZE_8(agp_bridge->previous_size);
pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
previous_size->size_value);
/* Do not disable by writing 0 to VIA_ATTBASE, it screws things up
* during reinitialization.
*/
}
static void via_tlbflush(struct agp_memory *mem)
{
u32 temp;
pci_read_config_dword(agp_bridge->dev, VIA_GARTCTRL, &temp);
temp |= (1<<7);
pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, temp);
temp &= ~(1<<7);
pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, temp);
}
static const struct aper_size_info_8 via_generic_sizes[9] =
{
{256, 65536, 6, 0},
{128, 32768, 5, 128},
{64, 16384, 4, 192},
{32, 8192, 3, 224},
{16, 4096, 2, 240},
{8, 2048, 1, 248},
{4, 1024, 0, 252},
{2, 512, 0, 254},
{1, 256, 0, 255}
};
static int via_fetch_size_agp3(void)
{
int i;
u16 temp;
struct aper_size_info_16 *values;
values = A_SIZE_16(agp_bridge->driver->aperture_sizes);
pci_read_config_word(agp_bridge->dev, VIA_AGP3_APSIZE, &temp);
temp &= 0xfff;
for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
if (temp == values[i].size_value) {
agp_bridge->previous_size =
agp_bridge->current_size = (void *) (values + i);
agp_bridge->aperture_size_idx = i;
return values[i].size;
}
}
return 0;
}
static int via_configure_agp3(void)
{
u32 temp;
struct aper_size_info_16 *current_size;
current_size = A_SIZE_16(agp_bridge->current_size);
/* address to map too */
pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
/* attbase - aperture GATT base */
pci_write_config_dword(agp_bridge->dev, VIA_AGP3_ATTBASE,
agp_bridge->gatt_bus_addr & 0xfffff000);
/* 1. Enable GTLB in RX90<7>, all AGP aperture access needs to fetch
* translation table first.
* 2. Enable AGP aperture in RX91<0>. This bit controls the enabling of the
* graphics AGP aperture for the AGP3.0 port.
*/
pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp);
pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp | (3<<7));
return 0;
}
static void via_cleanup_agp3(void)
{
struct aper_size_info_16 *previous_size;
previous_size = A_SIZE_16(agp_bridge->previous_size);
pci_write_config_byte(agp_bridge->dev, VIA_APSIZE, previous_size->size_value);
}
static void via_tlbflush_agp3(struct agp_memory *mem)
{
u32 temp;
pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp);
pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp & ~(1<<7));
pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp);
}
static const struct agp_bridge_driver via_agp3_driver = {
.owner = THIS_MODULE,
.aperture_sizes = agp3_generic_sizes,
.size_type = U8_APER_SIZE,
.num_aperture_sizes = 10,
.configure = via_configure_agp3,
.fetch_size = via_fetch_size_agp3,
.cleanup = via_cleanup_agp3,
.tlb_flush = via_tlbflush_agp3,
.mask_memory = agp_generic_mask_memory,
.masks = NULL,
.agp_enable = agp_generic_enable,
.cache_flush = global_cache_flush,
.create_gatt_table = agp_generic_create_gatt_table,
.free_gatt_table = agp_generic_free_gatt_table,
.insert_memory = agp_generic_insert_memory,
.remove_memory = agp_generic_remove_memory,
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
};
static const struct agp_bridge_driver via_driver = {
.owner = THIS_MODULE,
.aperture_sizes = via_generic_sizes,
.size_type = U8_APER_SIZE,
.num_aperture_sizes = 9,
.configure = via_configure,
.fetch_size = via_fetch_size,
.cleanup = via_cleanup,
.tlb_flush = via_tlbflush,
.mask_memory = agp_generic_mask_memory,
.masks = NULL,
.agp_enable = agp_generic_enable,
.cache_flush = global_cache_flush,
.create_gatt_table = agp_generic_create_gatt_table,
.free_gatt_table = agp_generic_free_gatt_table,
.insert_memory = agp_generic_insert_memory,
.remove_memory = agp_generic_remove_memory,
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
};
static struct agp_device_ids via_agp_device_ids[] __devinitdata =
{
{
.device_id = PCI_DEVICE_ID_VIA_82C597_0,
.chipset_name = "Apollo VP3",
},
{
.device_id = PCI_DEVICE_ID_VIA_82C598_0,
.chipset_name = "Apollo MVP3",
},
{
.device_id = PCI_DEVICE_ID_VIA_8501_0,
.chipset_name = "Apollo MVP4",
},
/* VT8601 */
{
.device_id = PCI_DEVICE_ID_VIA_8601_0,
.chipset_name = "Apollo ProMedia/PLE133Ta",
},
/* VT82C693A / VT28C694T */
{
.device_id = PCI_DEVICE_ID_VIA_82C691_0,
.chipset_name = "Apollo Pro 133",
},
{
.device_id = PCI_DEVICE_ID_VIA_8371_0,
.chipset_name = "KX133",
},
/* VT8633 */
{
.device_id = PCI_DEVICE_ID_VIA_8633_0,
.chipset_name = "Pro 266",
},
{
.device_id = PCI_DEVICE_ID_VIA_XN266,
.chipset_name = "Apollo Pro266",
},
/* VT8361 */
{
.device_id = PCI_DEVICE_ID_VIA_8361,
.chipset_name = "KLE133",
},
/* VT8365 / VT8362 */
{
.device_id = PCI_DEVICE_ID_VIA_8363_0,
.chipset_name = "Twister-K/KT133x/KM133",
},
/* VT8753A */
{
.device_id = PCI_DEVICE_ID_VIA_8753_0,
.chipset_name = "P4X266",
},
/* VT8366 */
{
.device_id = PCI_DEVICE_ID_VIA_8367_0,
.chipset_name = "KT266/KY266x/KT333",
},
/* VT8633 (for CuMine/ Celeron) */
{
.device_id = PCI_DEVICE_ID_VIA_8653_0,
.chipset_name = "Pro266T",
},
/* KM266 / PM266 */
{
.device_id = PCI_DEVICE_ID_VIA_XM266,
.chipset_name = "PM266/KM266",
},
/* CLE266 */
{
.device_id = PCI_DEVICE_ID_VIA_862X_0,
.chipset_name = "CLE266",
},
{
.device_id = PCI_DEVICE_ID_VIA_8377_0,
.chipset_name = "KT400/KT400A/KT600",
},
/* VT8604 / VT8605 / VT8603
* (Apollo Pro133A chipset with S3 Savage4) */
{
.device_id = PCI_DEVICE_ID_VIA_8605_0,
.chipset_name = "ProSavage PM133/PL133/PN133"
},
/* P4M266x/P4N266 */
{
.device_id = PCI_DEVICE_ID_VIA_8703_51_0,
.chipset_name = "P4M266x/P4N266",
},
/* VT8754 */
{
.device_id = PCI_DEVICE_ID_VIA_8754C_0,
.chipset_name = "PT800",
},
/* P4X600 */
{
.device_id = PCI_DEVICE_ID_VIA_8763_0,
.chipset_name = "P4X600"
},
/* KM400 */
{
.device_id = PCI_DEVICE_ID_VIA_8378_0,
.chipset_name = "KM400/KM400A",
},
/* PT880 */
{
.device_id = PCI_DEVICE_ID_VIA_PT880,
.chipset_name = "PT880",
},
/* PT880 Ultra */
{
.device_id = PCI_DEVICE_ID_VIA_PT880ULTRA,
.chipset_name = "PT880 Ultra",
},
/* PT890 */
{
.device_id = PCI_DEVICE_ID_VIA_8783_0,
.chipset_name = "PT890",
},
/* PM800/PN800/PM880/PN880 */
{
.device_id = PCI_DEVICE_ID_VIA_PX8X0_0,
.chipset_name = "PM800/PN800/PM880/PN880",
},
/* KT880 */
{
.device_id = PCI_DEVICE_ID_VIA_3269_0,
.chipset_name = "KT880",
},
/* KTxxx/Px8xx */
{
.device_id = PCI_DEVICE_ID_VIA_83_87XX_1,
.chipset_name = "VT83xx/VT87xx/KTxxx/Px8xx",
},
/* P4M800 */
{
.device_id = PCI_DEVICE_ID_VIA_3296_0,
.chipset_name = "P4M800",
},
/* P4M800CE */
{
.device_id = PCI_DEVICE_ID_VIA_P4M800CE,
.chipset_name = "VT3314",
},
/* VT3324 / CX700 */
{
.device_id = PCI_DEVICE_ID_VIA_VT3324,
.chipset_name = "CX700",
},
/* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique
* architecture, the AGP resource and behavior are different from
* the traditional AGP which resides only in chipset. AGP is used
* by 3D driver which wasn't available for the VT3336 and VT3364
* generation until now. Unfortunately, by testing, VT3364 works
* but VT3336 doesn't. - explaination from via, just leave this as
* as a placeholder to avoid future patches adding it back in.
*/
#if 0
{
.device_id = PCI_DEVICE_ID_VIA_VT3336,
.chipset_name = "VT3336",
},
#endif
/* P4M890 */
{
.device_id = PCI_DEVICE_ID_VIA_P4M890,
.chipset_name = "P4M890",
},
/* P4M900 */
{
.device_id = PCI_DEVICE_ID_VIA_VT3364,
.chipset_name = "P4M900",
},
{ }, /* dummy final entry, always present */
};
/*
* VIA's AGP3 chipsets do magick to put the AGP bridge compliant
* with the same standards version as the graphics card.
*/
static void check_via_agp3 (struct agp_bridge_data *bridge)
{
u8 reg;
pci_read_config_byte(bridge->dev, VIA_AGPSEL, ®);
/* Check AGP 2.0 compatibility mode. */
if ((reg & (1<<1))==0)
bridge->driver = &via_agp3_driver;
}
static int __devinit agp_via_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct agp_device_ids *devs = via_agp_device_ids;
struct agp_bridge_data *bridge;
int j = 0;
u8 cap_ptr;
cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
if (!cap_ptr)
return -ENODEV;
j = ent - agp_via_pci_table;
printk (KERN_INFO PFX "Detected VIA %s chipset\n", devs[j].chipset_name);
bridge = agp_alloc_bridge();
if (!bridge)
return -ENOMEM;
bridge->dev = pdev;
bridge->capndx = cap_ptr;
bridge->driver = &via_driver;
/*
* Garg, there are KT400s with KT266 IDs.
*/
if (pdev->device == PCI_DEVICE_ID_VIA_8367_0) {
/* Is there a KT400 subsystem ? */
if (pdev->subsystem_device == PCI_DEVICE_ID_VIA_8377_0) {
printk(KERN_INFO PFX "Found KT400 in disguise as a KT266.\n");
check_via_agp3(bridge);
}
}
/* If this is an AGP3 bridge, check which mode its in and adjust. */
get_agp_version(bridge);
if (bridge->major_version >= 3)
check_via_agp3(bridge);
/* Fill in the mode register */
pci_read_config_dword(pdev,
bridge->capndx+PCI_AGP_STATUS, &bridge->mode);
pci_set_drvdata(pdev, bridge);
return agp_add_bridge(bridge);
}
static void __devexit agp_via_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
agp_remove_bridge(bridge);
agp_put_bridge(bridge);
}
#ifdef CONFIG_PM
static int agp_via_suspend(struct pci_dev *pdev, pm_message_t state)
{
pci_save_state (pdev);
pci_set_power_state (pdev, PCI_D3hot);
return 0;
}
static int agp_via_resume(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
pci_set_power_state (pdev, PCI_D0);
pci_restore_state(pdev);
if (bridge->driver == &via_agp3_driver)
return via_configure_agp3();
else if (bridge->driver == &via_driver)
return via_configure();
return 0;
}
#endif /* CONFIG_PM */
/* must be the same order as name table above */
static const struct pci_device_id agp_via_pci_table[] = {
#define ID(x) \
{ \
.class = (PCI_CLASS_BRIDGE_HOST << 8), \
.class_mask = ~0, \
.vendor = PCI_VENDOR_ID_VIA, \
.device = x, \
.subvendor = PCI_ANY_ID, \
.subdevice = PCI_ANY_ID, \
}
ID(PCI_DEVICE_ID_VIA_82C597_0),
ID(PCI_DEVICE_ID_VIA_82C598_0),
ID(PCI_DEVICE_ID_VIA_8501_0),
ID(PCI_DEVICE_ID_VIA_8601_0),
ID(PCI_DEVICE_ID_VIA_82C691_0),
ID(PCI_DEVICE_ID_VIA_8371_0),
ID(PCI_DEVICE_ID_VIA_8633_0),
ID(PCI_DEVICE_ID_VIA_XN266),
ID(PCI_DEVICE_ID_VIA_8361),
ID(PCI_DEVICE_ID_VIA_8363_0),
ID(PCI_DEVICE_ID_VIA_8753_0),
ID(PCI_DEVICE_ID_VIA_8367_0),
ID(PCI_DEVICE_ID_VIA_8653_0),
ID(PCI_DEVICE_ID_VIA_XM266),
ID(PCI_DEVICE_ID_VIA_862X_0),
ID(PCI_DEVICE_ID_VIA_8377_0),
ID(PCI_DEVICE_ID_VIA_8605_0),
ID(PCI_DEVICE_ID_VIA_8703_51_0),
ID(PCI_DEVICE_ID_VIA_8754C_0),
ID(PCI_DEVICE_ID_VIA_8763_0),
ID(PCI_DEVICE_ID_VIA_8378_0),
ID(PCI_DEVICE_ID_VIA_PT880),
ID(PCI_DEVICE_ID_VIA_PT880ULTRA),
ID(PCI_DEVICE_ID_VIA_8783_0),
ID(PCI_DEVICE_ID_VIA_PX8X0_0),
ID(PCI_DEVICE_ID_VIA_3269_0),
ID(PCI_DEVICE_ID_VIA_83_87XX_1),
ID(PCI_DEVICE_ID_VIA_3296_0),
ID(PCI_DEVICE_ID_VIA_P4M800CE),
ID(PCI_DEVICE_ID_VIA_VT3324),
ID(PCI_DEVICE_ID_VIA_P4M890),
ID(PCI_DEVICE_ID_VIA_VT3364),
{ }
};
MODULE_DEVICE_TABLE(pci, agp_via_pci_table);
static struct pci_driver agp_via_pci_driver = {
.name = "agpgart-via",
.id_table = agp_via_pci_table,
.probe = agp_via_probe,
.remove = agp_via_remove,
#ifdef CONFIG_PM
.suspend = agp_via_suspend,
.resume = agp_via_resume,
#endif
};
static int __init agp_via_init(void)
{
if (agp_off)
return -EINVAL;
return pci_register_driver(&agp_via_pci_driver);
}
static void __exit agp_via_cleanup(void)
{
pci_unregister_driver(&agp_via_pci_driver);
}
module_init(agp_via_init);
module_exit(agp_via_cleanup);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Dave Jones <davej@codemonkey.org.uk>");
