/******************************************************************************
*
* Module Name: nsarguments - Validation of args for ACPI predefined methods
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2015, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
#include "acpredef.h"
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsarguments")
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_argument_types
*
* PARAMETERS: info - Method execution information block
*
* RETURN: None
*
* DESCRIPTION: Check the incoming argument count and all argument types
* against the argument type list for a predefined name.
*
******************************************************************************/
void acpi_ns_check_argument_types(struct acpi_evaluate_info *info)
{
u16 arg_type_list;
u8 arg_count;
u8 arg_type;
u8 user_arg_type;
u32 i;
/* If not a predefined name, cannot typecheck args */
if (!info->predefined) {
return;
}
arg_type_list = info->predefined->info.argument_list;
arg_count = METHOD_GET_ARG_COUNT(arg_type_list);
/* Typecheck all arguments */
for (i = 0; ((i < arg_count) && (i < info->param_count)); i++) {
arg_type = METHOD_GET_NEXT_TYPE(arg_type_list);
user_arg_type = info->parameters[i]->common.type;
if (user_arg_type != arg_type) {
ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname,
ACPI_WARN_ALWAYS,
"Argument #%u type mismatch - "
"Found [%s], ACPI requires [%s]",
(i + 1),
acpi_ut_get_type_name
(user_arg_type),
acpi_ut_get_type_name(arg_type)));
}
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_acpi_compliance
*
* PARAMETERS: pathname - Full pathname to the node (for error msgs)
* node - Namespace node for the method/object
* predefined - Pointer to entry in predefined name table
*
* RETURN: None
*
* DESCRIPTION: Check that the declared parameter count (in ASL/AML) for a
* predefined name is what is expected (matches what is defined in
* the ACPI specification for this predefined name.)
*
******************************************************************************/
void
acpi_ns_check_acpi_compliance(char *pathname,
struct acpi_namespace_node *node,
const union acpi_predefined_info *predefined)
{
u32 aml_param_count;
u32 required_param_count;
if (!predefined) {
return;
}
/* Get the ACPI-required arg count from the predefined info table */
required_param_count =
METHOD_GET_ARG_COUNT(predefined->info.argument_list);
/*
* If this object is not a control method, we can check if the ACPI
* spec requires that it be a method.
*/
if (node->type != ACPI_TYPE_METHOD) {
if (required_param_count > 0) {
/* Object requires args, must be implemented as a method */
ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Object (%s) must be a control method with %u arguments",
acpi_ut_get_type_name(node->
type),
required_param_count));
} else if (!required_param_count
&& !predefined->info.expected_btypes) {
/* Object requires no args and no return value, must be a method */
ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Object (%s) must be a control method "
"with no arguments and no return value",
acpi_ut_get_type_name(node->
type)));
}
return;
}
/*
* This is a control method.
* Check that the ASL/AML-defined parameter count for this method
* matches the ACPI-required parameter count
*
* Some methods are allowed to have a "minimum" number of args (_SCP)
* because their definition in ACPI has changed over time.
*
* Note: These are BIOS errors in the declaration of the object
*/
aml_param_count = node->object->method.param_count;
if (aml_param_count < required_param_count) {
ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS,
"Insufficient arguments - "
"ASL declared %u, ACPI requires %u",
aml_param_count,
required_param_count));
} else if ((aml_param_count > required_param_count)
&& !(predefined->info.
argument_list & ARG_COUNT_IS_MINIMUM)) {
ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS,
"Excess arguments - "
"ASL declared %u, ACPI requires %u",
aml_param_count,
required_param_count));
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_argument_count
*
* PARAMETERS: pathname - Full pathname to the node (for error msgs)
* node - Namespace node for the method/object
* user_param_count - Number of args passed in by the caller
* predefined - Pointer to entry in predefined name table
*
* RETURN: None
*
* DESCRIPTION: Check that incoming argument count matches the declared
* parameter count (in the ASL/AML) for an object.
*
******************************************************************************/
void
acpi_ns_check_argument_count(char *pathname,
struct acpi_namespace_node *node,
u32 user_param_count,
const union acpi_predefined_info *predefined)
{
u32 aml_param_count;
u32 required_param_count;
if (!predefined) {
/*
* Not a predefined name. Check the incoming user argument count
* against the count that is specified in the method/object.
*/
if (node->type != ACPI_TYPE_METHOD) {
if (user_param_count) {
ACPI_INFO_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"%u arguments were passed to a non-method ACPI object (%s)",
user_param_count,
acpi_ut_get_type_name
(node->type)));
}
return;
}
/*
* This is a control method. Check the parameter count.
* We can only check the incoming argument count against the
* argument count declared for the method in the ASL/AML.
*
* Emit a message if too few or too many arguments have been passed
* by the caller.
*
* Note: Too many arguments will not cause the method to
* fail. However, the method will fail if there are too few
* arguments and the method attempts to use one of the missing ones.
*/
aml_param_count = node->object->method.param_count;
if (user_param_count < aml_param_count) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Insufficient arguments - "
"Caller passed %u, method requires %u",
user_param_count,
aml_param_count));
} else if (user_param_count > aml_param_count) {
ACPI_INFO_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Excess arguments - "
"Caller passed %u, method requires %u",
user_param_count,
aml_param_count));
}
return;
}
/*
* This is a predefined name. Validate the user-supplied parameter
* count against the ACPI specification. We don't validate against
* the method itself because what is important here is that the
* caller is in conformance with the spec. (The arg count for the
* method was checked against the ACPI spec earlier.)
*
* Some methods are allowed to have a "minimum" number of args (_SCP)
* because their definition in ACPI has changed over time.
*/
required_param_count =
METHOD_GET_ARG_COUNT(predefined->info.argument_list);
if (user_param_count < required_param_count) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS,
"Insufficient arguments - "
"Caller passed %u, ACPI requires %u",
user_param_count, required_param_count));
} else if ((user_param_count > required_param_count) &&
!(predefined->info.argument_list & ARG_COUNT_IS_MINIMUM)) {
ACPI_INFO_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS,
"Excess arguments - "
"Caller passed %u, ACPI requires %u",
user_param_count, required_param_count));
}
}
