/*
* arch/powerpc/sysdev/qe_lib/ucc.c
*
* QE UCC API Set - UCC specific routines implementations.
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/module.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include <asm/ucc.h>
static DEFINE_SPINLOCK(ucc_lock);
int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
{
unsigned long flags;
if (ucc_num > UCC_MAX_NUM - 1)
return -EINVAL;
spin_lock_irqsave(&ucc_lock, flags);
clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
spin_unlock_irqrestore(&ucc_lock, flags);
return 0;
}
EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
/* Configure the UCC to either Slow or Fast.
*
* A given UCC can be figured to support either "slow" devices (e.g. UART)
* or "fast" devices (e.g. Ethernet).
*
* 'ucc_num' is the UCC number, from 0 - 7.
*
* This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
* must always be set to 1.
*/
int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
{
u8 __iomem *guemr;
/* The GUEMR register is at the same location for both slow and fast
devices, so we just use uccX.slow.guemr. */
switch (ucc_num) {
case 0: guemr = &qe_immr->ucc1.slow.guemr;
break;
case 1: guemr = &qe_immr->ucc2.slow.guemr;
break;
case 2: guemr = &qe_immr->ucc3.slow.guemr;
break;
case 3: guemr = &qe_immr->ucc4.slow.guemr;
break;
case 4: guemr = &qe_immr->ucc5.slow.guemr;
break;
case 5: guemr = &qe_immr->ucc6.slow.guemr;
break;
case 6: guemr = &qe_immr->ucc7.slow.guemr;
break;
case 7: guemr = &qe_immr->ucc8.slow.guemr;
break;
default:
return -EINVAL;
}
clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
UCC_GUEMR_SET_RESERVED3 | speed);
return 0;
}
static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
unsigned int *reg_num, unsigned int *shift)
{
unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
*reg_num = cmx + 1;
*cmxucr = &qe_immr->qmx.cmxucr[cmx];
*shift = 16 - 8 * (ucc_num & 2);
}
int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
{
__be32 *cmxucr;
unsigned int reg_num;
unsigned int shift;
/* check if the UCC number is in range. */
if (ucc_num > UCC_MAX_NUM - 1)
return -EINVAL;
get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift);
if (set)
setbits32(cmxucr, mask << shift);
else
clrbits32(cmxucr, mask << shift);
return 0;
}
int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
enum comm_dir mode)
{
__be32 *cmxucr;
unsigned int reg_num;
unsigned int shift;
u32 clock_bits = 0;
/* check if the UCC number is in range. */
if (ucc_num > UCC_MAX_NUM - 1)
return -EINVAL;
/* The communications direction must be RX or TX */
if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
return -EINVAL;
get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift);
switch (reg_num) {
case 1:
switch (clock) {
case QE_BRG1: clock_bits = 1; break;
case QE_BRG2: clock_bits = 2; break;
case QE_BRG7: clock_bits = 3; break;
case QE_BRG8: clock_bits = 4; break;
case QE_CLK9: clock_bits = 5; break;
case QE_CLK10: clock_bits = 6; break;
case QE_CLK11: clock_bits = 7; break;
case QE_CLK12: clock_bits = 8; break;
case QE_CLK15: clock_bits = 9; break;
case QE_CLK16: clock_bits = 10; break;
default: break;
}
break;
case 2:
switch (clock) {
case QE_BRG5: clock_bits = 1; break;
case QE_BRG6: clock_bits = 2; break;
case QE_BRG7: clock_bits = 3; break;
case QE_BRG8: clock_bits = 4; break;
case QE_CLK13: clock_bits = 5; break;
case QE_CLK14: clock_bits = 6; break;
case QE_CLK19: clock_bits = 7; break;
case QE_CLK20: clock_bits = 8; break;
case QE_CLK15: clock_bits = 9; break;
case QE_CLK16: clock_bits = 10; break;
default: break;
}
break;
case 3:
switch (clock) {
case QE_BRG9: clock_bits = 1; break;
case QE_BRG10: clock_bits = 2; break;
case QE_BRG15: clock_bits = 3; break;
case QE_BRG16: clock_bits = 4; break;
case QE_CLK3: clock_bits = 5; break;
case QE_CLK4: clock_bits = 6; break;
case QE_CLK17: clock_bits = 7; break;
case QE_CLK18: clock_bits = 8; break;
case QE_CLK7: clock_bits = 9; break;
case QE_CLK8: clock_bits = 10; break;
case QE_CLK16: clock_bits = 11; break;
default: break;
}
break;
case 4:
switch (clock) {
case QE_BRG13: clock_bits = 1; break;
case QE_BRG14: clock_bits = 2; break;
case QE_BRG15: clock_bits = 3; break;
case QE_BRG16: clock_bits = 4; break;
case QE_CLK5: clock_bits = 5; break;
case QE_CLK6: clock_bits = 6; break;
case QE_CLK21: clock_bits = 7; break;
case QE_CLK22: clock_bits = 8; break;
case QE_CLK7: clock_bits = 9; break;
case QE_CLK8: clock_bits = 10; break;
case QE_CLK16: clock_bits = 11; break;
default: break;
}
break;
default: break;
}
/* Check for invalid combination of clock and UCC number */
if (!clock_bits)
return -ENOENT;
if (mode == COMM_DIR_RX)
shift += 4;
clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
clock_bits << shift);
return 0;
}
