/*
* Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org),
* IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#define DEBUG
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/iommu.h>
#include <asm/ppc-pci.h>
#include "maple.h"
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
static struct pci_controller *u3_agp, *u3_ht;
static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
{
for (; node != 0;node = node->sibling) {
int * bus_range;
unsigned int *class_code;
int len;
/* For PCI<->PCI bridges or CardBus bridges, we go down */
class_code = (unsigned int *) get_property(node, "class-code", NULL);
if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
continue;
bus_range = (int *) get_property(node, "bus-range", &len);
if (bus_range != NULL && len > 2 * sizeof(int)) {
if (bus_range[1] > higher)
higher = bus_range[1];
}
higher = fixup_one_level_bus_range(node->child, higher);
}
return higher;
}
/* This routine fixes the "bus-range" property of all bridges in the
* system since they tend to have their "last" member wrong on macs
*
* Note that the bus numbers manipulated here are OF bus numbers, they
* are not Linux bus numbers.
*/
static void __init fixup_bus_range(struct device_node *bridge)
{
int * bus_range;
int len;
/* Lookup the "bus-range" property for the hose */
bus_range = (int *) get_property(bridge, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s\n",
bridge->full_name);
return;
}
bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
}
#define U3_AGP_CFA0(devfn, off) \
((1 << (unsigned long)PCI_SLOT(dev_fn)) \
| (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
| (((unsigned long)(off)) & 0xFCUL))
#define U3_AGP_CFA1(bus, devfn, off) \
((((unsigned long)(bus)) << 16) \
|(((unsigned long)(devfn)) << 8) \
|(((unsigned long)(off)) & 0xFCUL) \
|1UL)
static unsigned long u3_agp_cfg_access(struct pci_controller* hose,
u8 bus, u8 dev_fn, u8 offset)
{
unsigned int caddr;
if (bus == hose->first_busno) {
if (dev_fn < (11 << 3))
return 0;
caddr = U3_AGP_CFA0(dev_fn, offset);
} else
caddr = U3_AGP_CFA1(bus, dev_fn, offset);
/* Uninorth will return garbage if we don't read back the value ! */
do {
out_le32(hose->cfg_addr, caddr);
} while (in_le32(hose->cfg_addr) != caddr);
offset &= 0x07;
return ((unsigned long)hose->cfg_data) + offset;
}
static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
unsigned long addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
*val = in_8((u8 *)addr);
break;
case 2:
*val = in_le16((u16 *)addr);
break;
default:
*val = in_le32((u32 *)addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose;
unsigned long addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
out_8((u8 *)addr, val);
(void) in_8((u8 *)addr);
break;
case 2:
out_le16((u16 *)addr, val);
(void) in_le16((u16 *)addr);
break;
default:
out_le32((u32 *)addr, val);
(void) in_le32((u32 *)addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops u3_agp_pci_ops =
{
u3_agp_read_config,
u3_agp_write_config
};
#define U3_HT_CFA0(devfn, off) \
((((unsigned long)devfn) << 8) | offset)
#define U3_HT_CFA1(bus, devfn, off) \
(U3_HT_CFA0(devfn, off) \
+ (((unsigned long)bus) << 16) \
+ 0x01000000UL)
static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
u8 bus, u8 devfn, u8 offset)
{
if (bus == hose->first_busno) {
if (PCI_SLOT(devfn) == 0)
return 0;
return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset);
} else
return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset);
}
static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
unsigned long addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
*val = in_8((u8 *)addr);
break;
case 2:
*val = in_le16((u16 *)addr);
break;
default:
*val = in_le32((u32 *)addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose;
unsigned long addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
out_8((u8 *)addr, val);
(void) in_8((u8 *)addr);
break;
case 2:
out_le16((u16 *)addr, val);
(void) in_le16((u16 *)addr);
break;
default:
out_le32((u32 *)addr, val);
(void) in_le32((u32 *)addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops u3_ht_pci_ops =
{
u3_ht_read_config,
u3_ht_write_config
};
static void __init setup_u3_agp(struct pci_controller* hose)
{
/* On G5, we move AGP up to high bus number so we don't need
* to reassign bus numbers for HT. If we ever have P2P bridges
* on AGP, we'll have to move pci_assign_all_buses to the
* pci_controller structure so we enable it for AGP and not for
* HT childs.
* We hard code the address because of the different size of
* the reg address cell, we shall fix that by killing struct
* reg_property and using some accessor functions instead
*/
hose->first_busno = 0xf0;
hose->last_busno = 0xff;
hose->ops = &u3_agp_pci_ops;
hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
u3_agp = hose;
}
static void __init setup_u3_ht(struct pci_controller* hose)
{
hose->ops = &u3_ht_pci_ops;
/* We hard code the address because of the different size of
* the reg address cell, we shall fix that by killing struct
* reg_property and using some accessor functions instead
*/
hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000);
hose->first_busno = 0;
hose->last_busno = 0xef;
u3_ht = hose;
}
static int __init add_bridge(struct device_node *dev)
{
int len;
struct pci_controller *hose;
char* disp_name;
int *bus_range;
int primary = 1;
DBG("Adding PCI host bridge %s\n", dev->full_name);
bus_range = (int *) get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
dev->full_name);
}
hose = pcibios_alloc_controller(dev);
if (hose == NULL)
return -ENOMEM;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
disp_name = NULL;
if (device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
} else if (device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
}
printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
disp_name, hose->first_busno, hose->last_busno);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev, primary);
pci_setup_phb_io(hose, primary);
/* Fixup "bus-range" OF property */
fixup_bus_range(dev);
return 0;
}
void __init maple_pcibios_fixup(void)
{
struct pci_dev *dev = NULL;
DBG(" -> maple_pcibios_fixup\n");
for_each_pci_dev(dev)
pci_read_irq_line(dev);
DBG(" <- maple_pcibios_fixup\n");
}
static void __init maple_fixup_phb_resources(void)
{
struct pci_controller *hose, *tmp;
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base;
hose->io_resource.start += offset;
hose->io_resource.end += offset;
printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n",
hose->global_number,
hose->io_resource.start, hose->io_resource.end);
}
}
void __init maple_pci_init(void)
{
struct device_node *np, *root;
struct device_node *ht = NULL;
/* Probe root PCI hosts, that is on U3 the AGP host and the
* HyperTransport host. That one is actually "kept" around
* and actually added last as it's resource management relies
* on the AGP resources to have been setup first
*/
root = of_find_node_by_path("/");
if (root == NULL) {
printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n");
return;
}
for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
if (np->name == NULL)
continue;
if (strcmp(np->name, "pci") == 0) {
if (add_bridge(np) == 0)
of_node_get(np);
}
if (strcmp(np->name, "ht") == 0) {
of_node_get(np);
ht = np;
}
}
of_node_put(root);
/* Now setup the HyperTransport host if we found any
*/
if (ht && add_bridge(ht) != 0)
of_node_put(ht);
/* Fixup the IO resources on our host bridges as the common code
* does it only for childs of the host bridges
*/
maple_fixup_phb_resources();
/* Setup the linkage between OF nodes and PHBs */
pci_devs_phb_init();
/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
* assume there is no P2P bridge on the AGP bus, which should be a
* safe assumptions hopefully.
*/
if (u3_agp) {
struct device_node *np = u3_agp->arch_data;
PCI_DN(np)->busno = 0xf0;
for (np = np->child; np; np = np->sibling)
PCI_DN(np)->busno = 0xf0;
}
/* Tell pci.c to not change any resource allocations. */
pci_probe_only = 1;
/* Allow all IO */
io_page_mask = -1;
}
int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
{
struct device_node *np;
int irq = channel ? 15 : 14;
if (pdev->vendor != PCI_VENDOR_ID_AMD ||
pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
return irq;
np = pci_device_to_OF_node(pdev);
if (np == NULL)
return irq;
if (np->n_intrs < 2)
return irq;
return np->intrs[channel & 0x1].line;
}
/* XXX: To remove once all firmwares are ok */
static void fixup_maple_ide(struct pci_dev* dev)
{
#if 0 /* Enable this to enable IDE port 0 */
{
u8 v;
pci_read_config_byte(dev, 0x40, &v);
v |= 2;
pci_write_config_byte(dev, 0x40, v);
}
#endif
#if 0 /* fix bus master base */
pci_write_config_dword(dev, 0x20, 0xcc01);
printk("old ide resource: %lx -> %lx \n",
dev->resource[4].start, dev->resource[4].end);
dev->resource[4].start = 0xcc00;
dev->resource[4].end = 0xcc10;
#endif
#if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
{
struct pci_dev *apicdev;
u32 v;
apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
if (apicdev == NULL)
printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
else {
pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
pci_read_config_dword(apicdev, 0xf4, &v);
v &= ~0x00000022;
pci_write_config_dword(apicdev, 0xf4, v);
pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
pci_read_config_dword(apicdev, 0xf4, &v);
v &= ~0x00000022;
pci_write_config_dword(apicdev, 0xf4, v);
pci_dev_put(apicdev);
}
}
#endif
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
fixup_maple_ide);
