/*
* arch/powerpc/platforms/83xx/mpc837x_mds.c
*
* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
*
* MPC837x MDS board specific routines
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
#include <asm/prom.h>
#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
#define BCSR12_USB_SER_MASK 0x8a
#define BCSR12_USB_SER_PIN 0x80
#define BCSR12_USB_SER_DEVICE 0x02
static int mpc837xmds_usb_cfg(void)
{
struct device_node *np;
const void *phy_type, *mode;
void __iomem *bcsr_regs = NULL;
u8 bcsr12;
int ret;
ret = mpc837x_usb_cfg();
if (ret)
return ret;
/* Map BCSR area */
np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr");
if (np) {
bcsr_regs = of_iomap(np, 0);
of_node_put(np);
}
if (!bcsr_regs)
return -1;
np = of_find_node_by_name(NULL, "usb");
if (!np)
return -ENODEV;
phy_type = of_get_property(np, "phy_type", NULL);
if (phy_type && !strcmp(phy_type, "ulpi")) {
clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN);
} else if (phy_type && !strcmp(phy_type, "serial")) {
mode = of_get_property(np, "dr_mode", NULL);
bcsr12 = in_8(bcsr_regs + 12) & ~BCSR12_USB_SER_MASK;
bcsr12 |= BCSR12_USB_SER_PIN;
if (mode && !strcmp(mode, "peripheral"))
bcsr12 |= BCSR12_USB_SER_DEVICE;
out_8(bcsr_regs + 12, bcsr12);
} else {
printk(KERN_ERR "USB DR: unsupported PHY\n");
}
of_node_put(np);
iounmap(bcsr_regs);
return 0;
}
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init mpc837x_mds_setup_arch(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc837x_mds_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
mpc83xx_add_bridge(np);
for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
mpc83xx_add_bridge(np);
#endif
mpc837xmds_usb_cfg();
}
static struct of_device_id mpc837x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{},
};
static int __init mpc837x_declare_of_platform_devices(void)
{
/* Publish of_device */
of_platform_bus_probe(NULL, mpc837x_ids, NULL);
return 0;
}
machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices);
static void __init mpc837x_mds_init_IRQ(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
if (!np)
return;
ipic_init(np, 0);
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
ipic_set_default_priority();
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc837x_mds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,mpc837xmds");
}
define_machine(mpc837x_mds) {
.name = "MPC837x MDS",
.probe = mpc837x_mds_probe,
.setup_arch = mpc837x_mds_setup_arch,
.init_IRQ = mpc837x_mds_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
