/*
* Support for 'mpc5200-simple-platform' compatible boards.
*
* Written by Marian Balakowicz <m8@semihalf.com>
* Copyright (C) 2007 Semihalf
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Description:
* This code implements support for a simple MPC52xx based boards which
* do not need a custom platform specific setup. Such boards are
* supported assuming the following:
*
* - GPIO pins are configured by the firmware,
* - CDM configuration (clocking) is setup correctly by firmware,
* - if the 'fsl,has-wdt' property is present in one of the
* gpt nodes, then it is safe to use such gpt to reset the board,
* - PCI is supported if enabled in the kernel configuration
* and if there is a PCI bus node defined in the device tree.
*
* Boards that are compatible with this generic platform support
* are listed in a 'board' table.
*/
#undef DEBUG
#include <asm/time.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/mpc52xx.h>
/*
* Setup the architecture
*/
static void __init mpc5200_simple_setup_arch(void)
{
if (ppc_md.progress)
ppc_md.progress("mpc5200_simple_setup_arch()", 0);
/* Map important registers from the internal memory map */
mpc52xx_map_common_devices();
/* Some mpc5200 & mpc5200b related configuration */
mpc5200_setup_xlb_arbiter();
mpc52xx_setup_pci();
}
/* list of the supported boards */
static const char *board[] __initdata = {
"intercontrol,digsy-mtc",
"manroland,mucmc52",
"manroland,uc101",
"phytec,pcm030",
"phytec,pcm032",
"promess,motionpro",
"schindler,cm5200",
"tqc,tqm5200",
NULL
};
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc5200_simple_probe(void)
{
return of_flat_dt_match(of_get_flat_dt_root(), board);
}
define_machine(mpc5200_simple_platform) {
.name = "mpc5200-simple-platform",
.probe = mpc5200_simple_probe,
.setup_arch = mpc5200_simple_setup_arch,
.init = mpc52xx_declare_of_platform_devices,
.init_IRQ = mpc52xx_init_irq,
.get_irq = mpc52xx_get_irq,
.restart = mpc52xx_restart,
.calibrate_decr = generic_calibrate_decr,
};
