/*
* This file contains low-level functions for performing various
* types of TLB invalidations on various processors with no hash
* table.
*
* This file implements the following functions for all no-hash
* processors. Some aren't implemented for some variants. Some
* are inline in tlbflush.h
*
* - tlbil_va
* - tlbil_pid
* - tlbil_all
* - tlbivax_bcast (not yet)
*
* Code mostly moved over from misc_32.S
*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Partially rewritten by Cort Dougan (cort@cs.nmt.edu)
* Paul Mackerras, Kumar Gala and Benjamin Herrenschmidt.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/mmu.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/processor.h>
#if defined(CONFIG_40x)
/*
* 40x implementation needs only tlbil_va
*/
_GLOBAL(__tlbil_va)
/* We run the search with interrupts disabled because we have to change
* the PID and I don't want to preempt when that happens.
*/
mfmsr r5
mfspr r6,SPRN_PID
wrteei 0
mtspr SPRN_PID,r4
tlbsx. r3, 0, r3
mtspr SPRN_PID,r6
wrtee r5
bne 1f
sync
/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is
* clear. Since 25 is the V bit in the TLB_TAG, loading this value
* will invalidate the TLB entry. */
tlbwe r3, r3, TLB_TAG
isync
1: blr
#elif defined(CONFIG_8xx)
/*
* Nothing to do for 8xx, everything is inline
*/
#elif defined(CONFIG_44x)
/*
* 440 implementation uses tlbsx/we for tlbil_va and a full sweep
* of the TLB for everything else.
*/
_GLOBAL(__tlbil_va)
mfspr r5,SPRN_MMUCR
rlwimi r5,r4,0,24,31 /* Set TID */
/* We have to run the search with interrupts disabled, otherwise
* an interrupt which causes a TLB miss can clobber the MMUCR
* between the mtspr and the tlbsx.
*
* Critical and Machine Check interrupts take care of saving
* and restoring MMUCR, so only normal interrupts have to be
* taken care of.
*/
mfmsr r4
wrteei 0
mtspr SPRN_MMUCR,r5
tlbsx. r3, 0, r3
wrtee r4
bne 1f
sync
/* There are only 64 TLB entries, so r3 < 64,
* which means bit 22, is clear. Since 22 is
* the V bit in the TLB_PAGEID, loading this
* value will invalidate the TLB entry.
*/
tlbwe r3, r3, PPC44x_TLB_PAGEID
isync
1: blr
_GLOBAL(_tlbil_all)
_GLOBAL(_tlbil_pid)
li r3,0
sync
/* Load high watermark */
lis r4,tlb_44x_hwater@ha
lwz r5,tlb_44x_hwater@l(r4)
1: tlbwe r3,r3,PPC44x_TLB_PAGEID
addi r3,r3,1
cmpw 0,r3,r5
ble 1b
isync
blr
#elif defined(CONFIG_FSL_BOOKE)
/*
* FSL BookE implementations.
*
* Since feature sections are using _SECTION_ELSE we need
* to have the larger code path before the _SECTION_ELSE
*/
/*
* Flush MMU TLB on the local processor
*/
_GLOBAL(_tlbil_all)
BEGIN_MMU_FTR_SECTION
li r3,(MMUCSR0_TLBFI)@l
mtspr SPRN_MMUCSR0, r3
1:
mfspr r3,SPRN_MMUCSR0
andi. r3,r3,MMUCSR0_TLBFI@l
bne 1b
MMU_FTR_SECTION_ELSE
PPC_TLBILX_ALL(0,0)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
blr
_GLOBAL(_tlbil_pid)
BEGIN_MMU_FTR_SECTION
slwi r3,r3,16
mfmsr r10
wrteei 0
mfspr r4,SPRN_MAS6 /* save MAS6 */
mtspr SPRN_MAS6,r3
PPC_TLBILX_PID(0,0)
mtspr SPRN_MAS6,r4 /* restore MAS6 */
wrtee r10
MMU_FTR_SECTION_ELSE
li r3,(MMUCSR0_TLBFI)@l
mtspr SPRN_MMUCSR0, r3
1:
mfspr r3,SPRN_MMUCSR0
andi. r3,r3,MMUCSR0_TLBFI@l
bne 1b
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBILX)
msync
isync
blr
/*
* Flush MMU TLB for a particular address, but only on the local processor
* (no broadcast)
*/
_GLOBAL(__tlbil_va)
mfmsr r10
wrteei 0
slwi r4,r4,16
ori r4,r4,(MAS6_ISIZE(BOOK3E_PAGESZ_4K))@l
mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
BEGIN_MMU_FTR_SECTION
tlbsx 0,r3
mfspr r4,SPRN_MAS1 /* check valid */
andis. r3,r4,MAS1_VALID@h
beq 1f
rlwinm r4,r4,0,1,31
mtspr SPRN_MAS1,r4
tlbwe
MMU_FTR_SECTION_ELSE
PPC_TLBILX_VA(0,r3)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
1: wrtee r10
blr
#elif defined(CONFIG_PPC_BOOK3E)
/*
* New Book3E (>= 2.06) implementation
*
* Note: We may be able to get away without the interrupt masking stuff
* if we save/restore MAS6 on exceptions that might modify it
*/
_GLOBAL(_tlbil_pid)
slwi r4,r3,MAS6_SPID_SHIFT
mfmsr r10
wrteei 0
mtspr SPRN_MAS6,r4
PPC_TLBILX_PID(0,0)
wrtee r10
msync
isync
blr
_GLOBAL(_tlbil_pid_noind)
slwi r4,r3,MAS6_SPID_SHIFT
mfmsr r10
ori r4,r4,MAS6_SIND
wrteei 0
mtspr SPRN_MAS6,r4
PPC_TLBILX_PID(0,0)
wrtee r10
msync
isync
blr
_GLOBAL(_tlbil_all)
PPC_TLBILX_ALL(0,0)
msync
isync
blr
_GLOBAL(_tlbil_va)
mfmsr r10
wrteei 0
cmpwi cr0,r6,0
slwi r4,r4,MAS6_SPID_SHIFT
rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
beq 1f
rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
PPC_TLBILX_VA(0,r3)
msync
isync
wrtee r10
blr
_GLOBAL(_tlbivax_bcast)
mfmsr r10
wrteei 0
cmpwi cr0,r6,0
slwi r4,r4,MAS6_SPID_SHIFT
rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
beq 1f
rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
PPC_TLBIVAX(0,r3)
eieio
tlbsync
sync
wrtee r10
blr
_GLOBAL(set_context)
#ifdef CONFIG_BDI_SWITCH
/* Context switch the PTE pointer for the Abatron BDI2000.
* The PGDIR is the second parameter.
*/
lis r5, abatron_pteptrs@h
ori r5, r5, abatron_pteptrs@l
stw r4, 0x4(r5)
#endif
mtspr SPRN_PID,r3
isync /* Force context change */
blr
#else
#error Unsupported processor type !
#endif
