/*
* Port for PPC64 David Engebretsen, IBM Corp.
* Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
*
* Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
* Rework, based on alpha PCI code.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/syscalls.h>
#include <linux/irq.h>
#include <linux/vmalloc.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
unsigned long pci_probe_only = 1;
/* pci_io_base -- the base address from which io bars are offsets.
* This is the lowest I/O base address (so bar values are always positive),
* and it *must* be the start of ISA space if an ISA bus exists because
* ISA drivers use hard coded offsets. If no ISA bus exists nothing
* is mapped on the first 64K of IO space
*/
unsigned long pci_io_base = ISA_IO_BASE;
EXPORT_SYMBOL(pci_io_base);
static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
{
const u32 *prop;
int len;
prop = of_get_property(np, name, &len);
if (prop && len >= 4)
return *prop;
return def;
}
static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
{
unsigned int flags = 0;
if (addr0 & 0x02000000) {
flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
if (addr0 & 0x40000000)
flags |= IORESOURCE_PREFETCH
| PCI_BASE_ADDRESS_MEM_PREFETCH;
/* Note: We don't know whether the ROM has been left enabled
* by the firmware or not. We mark it as disabled (ie, we do
* not set the IORESOURCE_ROM_ENABLE flag) for now rather than
* do a config space read, it will be force-enabled if needed
*/
if (!bridge && (addr0 & 0xff) == 0x30)
flags |= IORESOURCE_READONLY;
} else if (addr0 & 0x01000000)
flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
if (flags)
flags |= IORESOURCE_SIZEALIGN;
return flags;
}
static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
{
u64 base, size;
unsigned int flags;
struct resource *res;
const u32 *addrs;
u32 i;
int proplen;
addrs = of_get_property(node, "assigned-addresses", &proplen);
if (!addrs)
return;
pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
for (; proplen >= 20; proplen -= 20, addrs += 5) {
flags = pci_parse_of_flags(addrs[0], 0);
if (!flags)
continue;
base = of_read_number(&addrs[1], 2);
size = of_read_number(&addrs[3], 2);
if (!size)
continue;
i = addrs[0] & 0xff;
pr_debug(" base: %llx, size: %llx, i: %x\n",
(unsigned long long)base,
(unsigned long long)size, i);
if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
} else if (i == dev->rom_base_reg) {
res = &dev->resource[PCI_ROM_RESOURCE];
flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
} else {
printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
continue;
}
res->start = base;
res->end = base + size - 1;
res->flags = flags;
res->name = pci_name(dev);
}
}
struct pci_dev *of_create_pci_dev(struct device_node *node,
struct pci_bus *bus, int devfn)
{
struct pci_dev *dev;
const char *type;
dev = alloc_pci_dev();
if (!dev)
return NULL;
type = of_get_property(node, "device_type", NULL);
if (type == NULL)
type = "";
pr_debug(" create device, devfn: %x, type: %s\n", devfn, type);
dev->bus = bus;
dev->sysdata = node;
dev->dev.parent = bus->bridge;
dev->dev.bus = &pci_bus_type;
dev->devfn = devfn;
dev->multifunction = 0; /* maybe a lie? */
dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
dev->device = get_int_prop(node, "device-id", 0xffff);
dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
dev->cfg_size = pci_cfg_space_size(dev);
dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
dev->revision = get_int_prop(node, "revision-id", 0);
pr_debug(" class: 0x%x\n", dev->class);
pr_debug(" revision: 0x%x\n", dev->revision);
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
dev->dma_mask = 0xffffffff;
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
} else if (!strcmp(type, "cardbus")) {
dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
} else {
dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
dev->rom_base_reg = PCI_ROM_ADDRESS;
/* Maybe do a default OF mapping here */
dev->irq = NO_IRQ;
}
pci_parse_of_addrs(node, dev);
pr_debug(" adding to system ...\n");
pci_device_add(dev, bus);
return dev;
}
EXPORT_SYMBOL(of_create_pci_dev);
static void __devinit __of_scan_bus(struct device_node *node,
struct pci_bus *bus, int rescan_existing)
{
struct device_node *child;
const u32 *reg;
int reglen, devfn;
struct pci_dev *dev;
pr_debug("of_scan_bus(%s) bus no %d... \n",
node->full_name, bus->number);
/* Scan direct children */
for_each_child_of_node(node, child) {
pr_debug(" * %s\n", child->full_name);
reg = of_get_property(child, "reg", ®len);
if (reg == NULL || reglen < 20)
continue;
devfn = (reg[0] >> 8) & 0xff;
/* create a new pci_dev for this device */
dev = of_create_pci_dev(child, bus, devfn);
if (!dev)
continue;
pr_debug(" dev header type: %x\n", dev->hdr_type);
}
/* Apply all fixups necessary. We don't fixup the bus "self"
* for an existing bridge that is being rescanned
*/
if (!rescan_existing)
pcibios_setup_bus_self(bus);
pcibios_setup_bus_devices(bus);
/* Now scan child busses */
list_for_each_entry(dev, &bus->devices, bus_list) {
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
struct device_node *child = pci_device_to_OF_node(dev);
if (dev)
of_scan_pci_bridge(child, dev);
}
}
}
void __devinit of_scan_bus(struct device_node *node,
struct pci_bus *bus)
{
__of_scan_bus(node, bus, 0);
}
EXPORT_SYMBOL_GPL(of_scan_bus);
void __devinit of_rescan_bus(struct device_node *node,
struct pci_bus *bus)
{
__of_scan_bus(node, bus, 1);
}
EXPORT_SYMBOL_GPL(of_rescan_bus);
void __devinit of_scan_pci_bridge(struct device_node *node,
struct pci_dev *dev)
{
struct pci_bus *bus;
const u32 *busrange, *ranges;
int len, i, mode;
struct resource *res;
unsigned int flags;
u64 size;
pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
/* parse bus-range property */
busrange = of_get_property(node, "bus-range", &len);
if (busrange == NULL || len != 8) {
printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
node->full_name);
return;
}
ranges = of_get_property(node, "ranges", &len);
if (ranges == NULL) {
printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
node->full_name);
return;
}
bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
if (!bus) {
printk(KERN_ERR "Failed to create pci bus for %s\n",
node->full_name);
return;
}
bus->primary = dev->bus->number;
bus->subordinate = busrange[1];
bus->bridge_ctl = 0;
bus->sysdata = node;
/* parse ranges property */
/* PCI #address-cells == 3 and #size-cells == 2 always */
res = &dev->resource[PCI_BRIDGE_RESOURCES];
for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
res->flags = 0;
bus->resource[i] = res;
++res;
}
i = 1;
for (; len >= 32; len -= 32, ranges += 8) {
flags = pci_parse_of_flags(ranges[0], 1);
size = of_read_number(&ranges[6], 2);
if (flags == 0 || size == 0)
continue;
if (flags & IORESOURCE_IO) {
res = bus->resource[0];
if (res->flags) {
printk(KERN_ERR "PCI: ignoring extra I/O range"
" for bridge %s\n", node->full_name);
continue;
}
} else {
if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
printk(KERN_ERR "PCI: too many memory ranges"
" for bridge %s\n", node->full_name);
continue;
}
res = bus->resource[i];
++i;
}
res->start = of_read_number(&ranges[1], 2);
res->end = res->start + size - 1;
res->flags = flags;
}
sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
bus->number);
pr_debug(" bus name: %s\n", bus->name);
mode = PCI_PROBE_NORMAL;
if (ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
pr_debug(" probe mode: %d\n", mode);
if (mode == PCI_PROBE_DEVTREE)
of_scan_bus(node, bus);
else if (mode == PCI_PROBE_NORMAL)
pci_scan_child_bus(bus);
}
EXPORT_SYMBOL(of_scan_pci_bridge);
void __devinit scan_phb(struct pci_controller *hose)
{
struct pci_bus *bus;
struct device_node *node = hose->dn;
int mode;
pr_debug("PCI: Scanning PHB %s\n",
node ? node->full_name : "<NO NAME>");
/* Create an empty bus for the toplevel */
bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node);
if (bus == NULL) {
printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
hose->global_number);
return;
}
bus->secondary = hose->first_busno;
hose->bus = bus;
/* Get some IO space for the new PHB */
pcibios_map_io_space(bus);
/* Wire up PHB bus resources */
pcibios_setup_phb_resources(hose);
/* Get probe mode and perform scan */
mode = PCI_PROBE_NORMAL;
if (node && ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
pr_debug(" probe mode: %d\n", mode);
if (mode == PCI_PROBE_DEVTREE) {
bus->subordinate = hose->last_busno;
of_scan_bus(node, bus);
}
if (mode == PCI_PROBE_NORMAL)
hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
}
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
printk(KERN_INFO "PCI: Probing PCI hardware\n");
/* For now, override phys_mem_access_prot. If we need it,g
* later, we may move that initialization to each ppc_md
*/
ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
if (pci_probe_only)
ppc_pci_flags |= PPC_PCI_PROBE_ONLY;
/* On ppc64, we always enable PCI domains and we keep domain 0
* backward compatible in /proc for video cards
*/
ppc_pci_flags |= PPC_PCI_ENABLE_PROC_DOMAINS | PPC_PCI_COMPAT_DOMAIN_0;
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
scan_phb(hose);
pci_bus_add_devices(hose->bus);
}
/* Call common code to handle resource allocation */
pcibios_resource_survey();
printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
return 0;
}
subsys_initcall(pcibios_init);
#ifdef CONFIG_HOTPLUG
int pcibios_unmap_io_space(struct pci_bus *bus)
{
struct pci_controller *hose;
WARN_ON(bus == NULL);
/* If this is not a PHB, we only flush the hash table over
* the area mapped by this bridge. We don't play with the PTE
* mappings since we might have to deal with sub-page alignemnts
* so flushing the hash table is the only sane way to make sure
* that no hash entries are covering that removed bridge area
* while still allowing other busses overlapping those pages
*
* Note: If we ever support P2P hotplug on Book3E, we'll have
* to do an appropriate TLB flush here too
*/
if (bus->self) {
struct resource *res = bus->resource[0];
pr_debug("IO unmapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
#ifdef CONFIG_PPC_STD_MMU_64
__flush_hash_table_range(&init_mm, res->start + _IO_BASE,
res->end + _IO_BASE + 1);
#endif
return 0;
}
/* Get the host bridge */
hose = pci_bus_to_host(bus);
/* Check if we have IOs allocated */
if (hose->io_base_alloc == 0)
return 0;
pr_debug("IO unmapping for PHB %s\n", hose->dn->full_name);
pr_debug(" alloc=0x%p\n", hose->io_base_alloc);
/* This is a PHB, we fully unmap the IO area */
vunmap(hose->io_base_alloc);
return 0;
}
EXPORT_SYMBOL_GPL(pcibios_unmap_io_space);
#endif /* CONFIG_HOTPLUG */
int __devinit pcibios_map_io_space(struct pci_bus *bus)
{
struct vm_struct *area;
unsigned long phys_page;
unsigned long size_page;
unsigned long io_virt_offset;
struct pci_controller *hose;
WARN_ON(bus == NULL);
/* If this not a PHB, nothing to do, page tables still exist and
* thus HPTEs will be faulted in when needed
*/
if (bus->self) {
pr_debug("IO mapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
pr_debug(" virt=0x%016llx...0x%016llx\n",
bus->resource[0]->start + _IO_BASE,
bus->resource[0]->end + _IO_BASE);
return 0;
}
/* Get the host bridge */
hose = pci_bus_to_host(bus);
phys_page = _ALIGN_DOWN(hose->io_base_phys, PAGE_SIZE);
size_page = _ALIGN_UP(hose->pci_io_size, PAGE_SIZE);
/* Make sure IO area address is clear */
hose->io_base_alloc = NULL;
/* If there's no IO to map on that bus, get away too */
if (hose->pci_io_size == 0 || hose->io_base_phys == 0)
return 0;
/* Let's allocate some IO space for that guy. We don't pass
* VM_IOREMAP because we don't care about alignment tricks that
* the core does in that case. Maybe we should due to stupid card
* with incomplete address decoding but I'd rather not deal with
* those outside of the reserved 64K legacy region.
*/
area = __get_vm_area(size_page, 0, PHB_IO_BASE, PHB_IO_END);
if (area == NULL)
return -ENOMEM;
hose->io_base_alloc = area->addr;
hose->io_base_virt = (void __iomem *)(area->addr +
hose->io_base_phys - phys_page);
pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
pr_debug(" phys=0x%016llx, virt=0x%p (alloc=0x%p)\n",
hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
pr_debug(" size=0x%016llx (alloc=0x%016lx)\n",
hose->pci_io_size, size_page);
/* Establish the mapping */
if (__ioremap_at(phys_page, area->addr, size_page,
_PAGE_NO_CACHE | _PAGE_GUARDED) == NULL)
return -ENOMEM;
/* Fixup hose IO resource */
io_virt_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
hose->io_resource.start += io_virt_offset;
hose->io_resource.end += io_virt_offset;
pr_debug(" hose->io_resource=0x%016llx...0x%016llx\n",
hose->io_resource.start, hose->io_resource.end);
return 0;
}
EXPORT_SYMBOL_GPL(pcibios_map_io_space);
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
#define IOBASE_ISA_IO 3
#define IOBASE_ISA_MEM 4
long sys_pciconfig_iobase(long which, unsigned long in_bus,
unsigned long in_devfn)
{
struct pci_controller* hose;
struct list_head *ln;
struct pci_bus *bus = NULL;
struct device_node *hose_node;
/* Argh ! Please forgive me for that hack, but that's the
* simplest way to get existing XFree to not lockup on some
* G5 machines... So when something asks for bus 0 io base
* (bus 0 is HT root), we return the AGP one instead.
*/
if (in_bus == 0 && machine_is_compatible("MacRISC4")) {
struct device_node *agp;
agp = of_find_compatible_node(NULL, NULL, "u3-agp");
if (agp)
in_bus = 0xf0;
of_node_put(agp);
}
/* That syscall isn't quite compatible with PCI domains, but it's
* used on pre-domains setup. We return the first match
*/
for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
bus = pci_bus_b(ln);
if (in_bus >= bus->number && in_bus <= bus->subordinate)
break;
bus = NULL;
}
if (bus == NULL || bus->sysdata == NULL)
return -ENODEV;
hose_node = (struct device_node *)bus->sysdata;
hose = PCI_DN(hose_node)->phb;
switch (which) {
case IOBASE_BRIDGE_NUMBER:
return (long)hose->first_busno;
case IOBASE_MEMORY:
return (long)hose->pci_mem_offset;
case IOBASE_IO:
return (long)hose->io_base_phys;
case IOBASE_ISA_IO:
return (long)isa_io_base;
case IOBASE_ISA_MEM:
return -EINVAL;
}
return -EOPNOTSUPP;
}
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
{
struct pci_controller *phb = pci_bus_to_host(bus);
return phb->node;
}
EXPORT_SYMBOL(pcibus_to_node);
#endif
