/*
* Port for PPC64 David Engebretsen, IBM Corp.
* Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
*
* Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
* Rework, based on alpha PCI code.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/export.h>
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/syscalls.h>
#include <linux/irq.h>
#include <linux/vmalloc.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
/* pci_io_base -- the base address from which io bars are offsets.
* This is the lowest I/O base address (so bar values are always positive),
* and it *must* be the start of ISA space if an ISA bus exists because
* ISA drivers use hard coded offsets. If no ISA bus exists nothing
* is mapped on the first 64K of IO space
*/
unsigned long pci_io_base = ISA_IO_BASE;
EXPORT_SYMBOL(pci_io_base);
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
printk(KERN_INFO "PCI: Probing PCI hardware\n");
/* For now, override phys_mem_access_prot. If we need it,g
* later, we may move that initialization to each ppc_md
*/
ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
/* On ppc64, we always enable PCI domains and we keep domain 0
* backward compatible in /proc for video cards
*/
pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0);
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
pcibios_scan_phb(hose);
pci_bus_add_devices(hose->bus);
}
/* Call common code to handle resource allocation */
pcibios_resource_survey();
printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
return 0;
}
subsys_initcall(pcibios_init);
#ifdef CONFIG_HOTPLUG
int pcibios_unmap_io_space(struct pci_bus *bus)
{
struct pci_controller *hose;
WARN_ON(bus == NULL);
/* If this is not a PHB, we only flush the hash table over
* the area mapped by this bridge. We don't play with the PTE
* mappings since we might have to deal with sub-page alignemnts
* so flushing the hash table is the only sane way to make sure
* that no hash entries are covering that removed bridge area
* while still allowing other busses overlapping those pages
*
* Note: If we ever support P2P hotplug on Book3E, we'll have
* to do an appropriate TLB flush here too
*/
if (bus->self) {
#ifdef CONFIG_PPC_STD_MMU_64
struct resource *res = bus->resource[0];
#endif
pr_debug("IO unmapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
#ifdef CONFIG_PPC_STD_MMU_64
__flush_hash_table_range(&init_mm, res->start + _IO_BASE,
res->end + _IO_BASE + 1);
#endif
return 0;
}
/* Get the host bridge */
hose = pci_bus_to_host(bus);
/* Check if we have IOs allocated */
if (hose->io_base_alloc == 0)
return 0;
pr_debug("IO unmapping for PHB %s\n", hose->dn->full_name);
pr_debug(" alloc=0x%p\n", hose->io_base_alloc);
/* This is a PHB, we fully unmap the IO area */
vunmap(hose->io_base_alloc);
return 0;
}
EXPORT_SYMBOL_GPL(pcibios_unmap_io_space);
#endif /* CONFIG_HOTPLUG */
static int __devinit pcibios_map_phb_io_space(struct pci_controller *hose)
{
struct vm_struct *area;
unsigned long phys_page;
unsigned long size_page;
unsigned long io_virt_offset;
phys_page = _ALIGN_DOWN(hose->io_base_phys, PAGE_SIZE);
size_page = _ALIGN_UP(hose->pci_io_size, PAGE_SIZE);
/* Make sure IO area address is clear */
hose->io_base_alloc = NULL;
/* If there's no IO to map on that bus, get away too */
if (hose->pci_io_size == 0 || hose->io_base_phys == 0)
return 0;
/* Let's allocate some IO space for that guy. We don't pass
* VM_IOREMAP because we don't care about alignment tricks that
* the core does in that case. Maybe we should due to stupid card
* with incomplete address decoding but I'd rather not deal with
* those outside of the reserved 64K legacy region.
*/
area = __get_vm_area(size_page, 0, PHB_IO_BASE, PHB_IO_END);
if (area == NULL)
return -ENOMEM;
hose->io_base_alloc = area->addr;
hose->io_base_virt = (void __iomem *)(area->addr +
hose->io_base_phys - phys_page);
pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
pr_debug(" phys=0x%016llx, virt=0x%p (alloc=0x%p)\n",
hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
pr_debug(" size=0x%016llx (alloc=0x%016lx)\n",
hose->pci_io_size, size_page);
/* Establish the mapping */
if (__ioremap_at(phys_page, area->addr, size_page,
_PAGE_NO_CACHE | _PAGE_GUARDED) == NULL)
return -ENOMEM;
/* Fixup hose IO resource */
io_virt_offset = pcibios_io_space_offset(hose);
hose->io_resource.start += io_virt_offset;
hose->io_resource.end += io_virt_offset;
pr_debug(" hose->io_resource=%pR\n", &hose->io_resource);
return 0;
}
int __devinit pcibios_map_io_space(struct pci_bus *bus)
{
WARN_ON(bus == NULL);
/* If this not a PHB, nothing to do, page tables still exist and
* thus HPTEs will be faulted in when needed
*/
if (bus->self) {
pr_debug("IO mapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
pr_debug(" virt=0x%016llx...0x%016llx\n",
bus->resource[0]->start + _IO_BASE,
bus->resource[0]->end + _IO_BASE);
return 0;
}
return pcibios_map_phb_io_space(pci_bus_to_host(bus));
}
EXPORT_SYMBOL_GPL(pcibios_map_io_space);
void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
{
pcibios_map_phb_io_space(hose);
}
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
#define IOBASE_ISA_IO 3
#define IOBASE_ISA_MEM 4
long sys_pciconfig_iobase(long which, unsigned long in_bus,
unsigned long in_devfn)
{
struct pci_controller* hose;
struct list_head *ln;
struct pci_bus *bus = NULL;
struct device_node *hose_node;
/* Argh ! Please forgive me for that hack, but that's the
* simplest way to get existing XFree to not lockup on some
* G5 machines... So when something asks for bus 0 io base
* (bus 0 is HT root), we return the AGP one instead.
*/
if (in_bus == 0 && of_machine_is_compatible("MacRISC4")) {
struct device_node *agp;
agp = of_find_compatible_node(NULL, NULL, "u3-agp");
if (agp)
in_bus = 0xf0;
of_node_put(agp);
}
/* That syscall isn't quite compatible with PCI domains, but it's
* used on pre-domains setup. We return the first match
*/
for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
bus = pci_bus_b(ln);
if (in_bus >= bus->number && in_bus <= bus->subordinate)
break;
bus = NULL;
}
if (bus == NULL || bus->dev.of_node == NULL)
return -ENODEV;
hose_node = bus->dev.of_node;
hose = PCI_DN(hose_node)->phb;
switch (which) {
case IOBASE_BRIDGE_NUMBER:
return (long)hose->first_busno;
case IOBASE_MEMORY:
return (long)hose->pci_mem_offset;
case IOBASE_IO:
return (long)hose->io_base_phys;
case IOBASE_ISA_IO:
return (long)isa_io_base;
case IOBASE_ISA_MEM:
return -EINVAL;
}
return -EOPNOTSUPP;
}
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
{
struct pci_controller *phb = pci_bus_to_host(bus);
return phb->node;
}
EXPORT_SYMBOL(pcibus_to_node);
#endif
