/*
* arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
*
* Initialize for ALi M1535+(included M5229 and M5237).
*
* Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
* Alex Sapkov <asapkov@ru.mvista.com>
*
* 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Support for NEC-CMBVR4133 in 2.6
* Author: Manish Lachwani (mlachwani@mvista.com)
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/serial.h>
#include <asm/vr41xx/cmbvr4133.h>
#include <linux/pci.h>
#include <asm/io.h>
#define CONFIG_PORT(port) ((port) ? 0x3f0 : 0x370)
#define DATA_PORT(port) ((port) ? 0x3f1 : 0x371)
#define INDEX_PORT(port) CONFIG_PORT(port)
#define ENTER_CONFIG_MODE(port) \
do { \
outb_p(0x51, CONFIG_PORT(port)); \
outb_p(0x23, CONFIG_PORT(port)); \
} while(0)
#define SELECT_LOGICAL_DEVICE(port, dev_no) \
do { \
outb_p(0x07, INDEX_PORT(port)); \
outb_p((dev_no), DATA_PORT(port)); \
} while(0)
#define WRITE_CONFIG_DATA(port,index,data) \
do { \
outb_p((index), INDEX_PORT(port)); \
outb_p((data), DATA_PORT(port)); \
} while(0)
#define EXIT_CONFIG_MODE(port) outb(0xbb, CONFIG_PORT(port))
#define PCI_CONFIG_ADDR KSEG1ADDR(0x0f000c18)
#define PCI_CONFIG_DATA KSEG1ADDR(0x0f000c14)
#ifdef CONFIG_BLK_DEV_FD
void __devinit ali_m1535plus_fdc_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 0); /* FDC */
WRITE_CONFIG_DATA(port, 0x30, 0x01); /* FDC: enable */
WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x3f0 */
WRITE_CONFIG_DATA(port, 0x61, 0xf0);
WRITE_CONFIG_DATA(port, 0x70, 0x06); /* IRQ: 6 */
WRITE_CONFIG_DATA(port, 0x74, 0x02); /* DMA: channel 2 */
WRITE_CONFIG_DATA(port, 0xf0, 0x08);
WRITE_CONFIG_DATA(port, 0xf1, 0x00);
WRITE_CONFIG_DATA(port, 0xf2, 0xff);
WRITE_CONFIG_DATA(port, 0xf4, 0x00);
EXIT_CONFIG_MODE(port);
}
#endif
void __devinit ali_m1535plus_parport_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 3); /* Parallel Port */
WRITE_CONFIG_DATA(port, 0x30, 0x01);
WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x378 */
WRITE_CONFIG_DATA(port, 0x61, 0x78);
WRITE_CONFIG_DATA(port, 0x70, 0x07); /* IRQ: 7 */
WRITE_CONFIG_DATA(port, 0x74, 0x04); /* DMA: None */
WRITE_CONFIG_DATA(port, 0xf0, 0x8c); /* IRQ polarity: Active Low */
WRITE_CONFIG_DATA(port, 0xf1, 0xc5);
EXIT_CONFIG_MODE(port);
}
void __devinit ali_m1535plus_keyboard_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 7); /* KEYBOARD */
WRITE_CONFIG_DATA(port, 0x30, 0x01); /* KEYBOARD: eable */
WRITE_CONFIG_DATA(port, 0x70, 0x01); /* IRQ: 1 */
WRITE_CONFIG_DATA(port, 0x72, 0x0c); /* PS/2 Mouse IRQ: 12 */
WRITE_CONFIG_DATA(port, 0xf0, 0x00);
EXIT_CONFIG_MODE(port);
}
void __devinit ali_m1535plus_hotkey_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 0xc); /* HOTKEY */
WRITE_CONFIG_DATA(port, 0x30, 0x00);
WRITE_CONFIG_DATA(port, 0xf0, 0x35);
WRITE_CONFIG_DATA(port, 0xf1, 0x14);
WRITE_CONFIG_DATA(port, 0xf2, 0x11);
WRITE_CONFIG_DATA(port, 0xf3, 0x71);
WRITE_CONFIG_DATA(port, 0xf5, 0x05);
EXIT_CONFIG_MODE(port);
}
void ali_m1535plus_init(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x40, 0x18); /* PCI Interface Control */
pci_write_config_byte(dev, 0x41, 0xc0); /* PS2 keyb & mouse enable */
pci_write_config_byte(dev, 0x42, 0x41); /* ISA bus cycle control */
pci_write_config_byte(dev, 0x43, 0x00); /* ISA bus cycle control 2 */
pci_write_config_byte(dev, 0x44, 0x5d); /* IDE enable & IRQ 14 */
pci_write_config_byte(dev, 0x45, 0x0b); /* PCI int polling mode */
pci_write_config_byte(dev, 0x47, 0x00); /* BIOS chip select control */
/* IRQ routing */
pci_write_config_byte(dev, 0x48, 0x03); /* INTA IRQ10, INTB disable */
pci_write_config_byte(dev, 0x49, 0x00); /* INTC and INTD disable */
pci_write_config_byte(dev, 0x4a, 0x00); /* INTE and INTF disable */
pci_write_config_byte(dev, 0x4b, 0x90); /* Audio IRQ11, Modem disable */
pci_write_config_word(dev, 0x50, 0x4000); /* Parity check IDE enable */
pci_write_config_word(dev, 0x52, 0x0000); /* USB & RTC disable */
pci_write_config_word(dev, 0x54, 0x0002); /* ??? no info */
pci_write_config_word(dev, 0x56, 0x0002); /* PCS1J signal disable */
pci_write_config_byte(dev, 0x59, 0x00); /* PCSDS */
pci_write_config_byte(dev, 0x5a, 0x00);
pci_write_config_byte(dev, 0x5b, 0x00);
pci_write_config_word(dev, 0x5c, 0x0000);
pci_write_config_byte(dev, 0x5e, 0x00);
pci_write_config_byte(dev, 0x5f, 0x00);
pci_write_config_word(dev, 0x60, 0x0000);
pci_write_config_byte(dev, 0x6c, 0x00);
pci_write_config_byte(dev, 0x6d, 0x48); /* ROM address mapping */
pci_write_config_byte(dev, 0x6e, 0x00); /* ??? what for? */
pci_write_config_byte(dev, 0x70, 0x12); /* Serial IRQ control */
pci_write_config_byte(dev, 0x71, 0xEF); /* DMA channel select */
pci_write_config_byte(dev, 0x72, 0x03); /* USB IDSEL */
pci_write_config_byte(dev, 0x73, 0x00); /* ??? no info */
/*
* IRQ setup ALi M5237 USB Host Controller
* IRQ: 9
*/
pci_write_config_byte(dev, 0x74, 0x01); /* USB IRQ9 */
pci_write_config_byte(dev, 0x75, 0x1f); /* IDE2 IRQ 15 */
pci_write_config_byte(dev, 0x76, 0x80); /* ACPI disable */
pci_write_config_byte(dev, 0x77, 0x40); /* Modem disable */
pci_write_config_dword(dev, 0x78, 0x20000000); /* Pin select 2 */
pci_write_config_byte(dev, 0x7c, 0x00); /* Pin select 3 */
pci_write_config_byte(dev, 0x81, 0x00); /* ID read/write control */
pci_write_config_byte(dev, 0x90, 0x00); /* PCI PM block control */
pci_write_config_word(dev, 0xa4, 0x0000); /* PMSCR */
#ifdef CONFIG_BLK_DEV_FD
ali_m1535plus_fdc_init(1);
#endif
ali_m1535plus_keyboard_init(1);
ali_m1535plus_hotkey_init(1);
}
static inline void ali_config_writeb(u8 reg, u8 val, int devfn)
{
u32 data;
int shift;
writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
shift = (reg & 3) << 3;
data &= ~(0xff << shift);
data |= (((u32)val) << shift);
writel(data, PCI_CONFIG_DATA);
}
static inline u8 ali_config_readb(u8 reg, int devfn)
{
u32 data;
writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
return (u8)(data >> ((reg & 3) << 3));
}
static inline u16 ali_config_readw(u8 reg, int devfn)
{
u32 data;
writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
return (u16)(data >> ((reg & 2) << 3));
}
int vr4133_rockhopper = 0;
void __init ali_m5229_preinit(void)
{
if (ali_config_readw(PCI_VENDOR_ID,16) == PCI_VENDOR_ID_AL &&
ali_config_readw(PCI_DEVICE_ID,16) == PCI_DEVICE_ID_AL_M1533) {
printk(KERN_INFO "Found an NEC Rockhopper \n");
vr4133_rockhopper = 1;
/*
* Enable ALi M5229 IDE Controller (both channels)
* IDSEL: A27
*/
ali_config_writeb(0x58, 0x4c, 16);
}
}
void __init ali_m5229_init(struct pci_dev *dev)
{
/*
* Enable Primary/Secondary Channel Cable Detect 40-Pin
*/
pci_write_config_word(dev, 0x4a, 0xc023);
/*
* Set only the 3rd byteis for the master IDE's cycle and
* enable Internal IDE Function
*/
pci_write_config_byte(dev, 0x50, 0x23); /* Class code attr register */
pci_write_config_byte(dev, 0x09, 0xff); /* Set native mode & stuff */
pci_write_config_byte(dev, 0x52, 0x00); /* use timing registers */
pci_write_config_byte(dev, 0x58, 0x02); /* Primary addr setup timing */
pci_write_config_byte(dev, 0x59, 0x22); /* Primary cmd block timing */
pci_write_config_byte(dev, 0x5a, 0x22); /* Pr drv 0 R/W timing */
pci_write_config_byte(dev, 0x5b, 0x22); /* Pr drv 1 R/W timing */
pci_write_config_byte(dev, 0x5c, 0x02); /* Sec addr setup timing */
pci_write_config_byte(dev, 0x5d, 0x22); /* Sec cmd block timing */
pci_write_config_byte(dev, 0x5e, 0x22); /* Sec drv 0 R/W timing */
pci_write_config_byte(dev, 0x5f, 0x22); /* Sec drv 1 R/W timing */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
pci_write_config_word(dev, PCI_COMMAND,
PCI_COMMAND_PARITY | PCI_COMMAND_MASTER |
PCI_COMMAND_IO);
}
