/*
* pci.c -- basic PCI support code
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/pci.h>
/*
* From arch/i386/kernel/pci-i386.c:
*
* We need to avoid collisions with `mirrored' VGA ports
* and other strange ISA hardware, so we always want the
* addresses to be allocated in the 0x000-0x0ff region
* modulo 0x400.
*
* Why? Because some silly external IO cards only decode
* the low 10 bits of the IO address. The 0x00-0xff region
* is reserved for motherboard devices that decode all 16
* bits, so it's ok to allocate at, say, 0x2800-0x28ff,
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might be mirrored at 0x0100-0x03ff..
*/
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
resource_size_t start = res->start;
if ((res->flags & IORESOURCE_IO) && (start & 0x300))
start = (start + 0x3ff) & ~0x3ff;
start = (start + align - 1) & ~(align - 1);
return start;
}
/*
* This is taken from the ARM code for this.
*/
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
struct resource *r;
u16 cmd, newcmd;
int idx;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
newcmd = cmd;
for (idx = 0; idx < 6; idx++) {
/* Only set up the requested stuff */
if (!(mask & (1 << idx)))
continue;
r = dev->resource + idx;
if (!r->start && r->end) {
pr_err(KERN_ERR "PCI: Device %s not available because of resource collisions\n",
pci_name(dev));
return -EINVAL;
}
if (r->flags & IORESOURCE_IO)
newcmd |= PCI_COMMAND_IO;
if (r->flags & IORESOURCE_MEM)
newcmd |= PCI_COMMAND_MEMORY;
}
/*
* Bridges (eg, cardbus bridges) need to be fully enabled
*/
if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
if (newcmd != cmd) {
pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n",
pci_name(dev), cmd, newcmd);
pci_write_config_word(dev, PCI_COMMAND, newcmd);
}
return 0;
}
void pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_dev *dev;
list_for_each_entry(dev, &bus->devices, bus_list) {
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32);
}
}
char *pcibios_setup(char *str)
{
return str;
}
