/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000,2002-2005 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <asm/delay.h>
#include <asm/sn/sn_sal.h>
#include "ioerror.h"
#include <asm/sn/addrs.h>
#include <asm/sn/shubio.h>
#include <asm/sn/geo.h>
#include "xtalk/xwidgetdev.h"
#include "xtalk/hubdev.h"
#include <asm/sn/bte.h>
void hubiio_crb_error_handler(struct hubdev_info *hubdev_info);
extern void bte_crb_error_handler(cnodeid_t, int, int, ioerror_t *,
int);
static irqreturn_t hub_eint_handler(int irq, void *arg, struct pt_regs *ep)
{
struct hubdev_info *hubdev_info;
struct ia64_sal_retval ret_stuff;
nasid_t nasid;
ret_stuff.status = 0;
ret_stuff.v0 = 0;
hubdev_info = (struct hubdev_info *)arg;
nasid = hubdev_info->hdi_nasid;
SAL_CALL_NOLOCK(ret_stuff, SN_SAL_HUB_ERROR_INTERRUPT,
(u64) nasid, 0, 0, 0, 0, 0, 0);
if ((int)ret_stuff.v0)
panic("hubii_eint_handler(): Fatal TIO Error");
if (is_shub1()) {
if (!(nasid & 1)) /* Not a TIO, handle CRB errors */
(void)hubiio_crb_error_handler(hubdev_info);
} else
bte_error_handler((unsigned long)NODEPDA(nasid_to_cnodeid(nasid)));
return IRQ_HANDLED;
}
/*
* Free the hub CRB "crbnum" which encountered an error.
* Assumption is, error handling was successfully done,
* and we now want to return the CRB back to Hub for normal usage.
*
* In order to free the CRB, all that's needed is to de-allocate it
*
* Assumption:
* No other processor is mucking around with the hub control register.
* So, upper layer has to single thread this.
*/
void hubiio_crb_free(struct hubdev_info *hubdev_info, int crbnum)
{
ii_icrb0_b_u_t icrbb;
/*
* The hardware does NOT clear the mark bit, so it must get cleared
* here to be sure the error is not processed twice.
*/
icrbb.ii_icrb0_b_regval = REMOTE_HUB_L(hubdev_info->hdi_nasid,
IIO_ICRB_B(crbnum));
icrbb.b_mark = 0;
REMOTE_HUB_S(hubdev_info->hdi_nasid, IIO_ICRB_B(crbnum),
icrbb.ii_icrb0_b_regval);
/*
* Deallocate the register wait till hub indicates it's done.
*/
REMOTE_HUB_S(hubdev_info->hdi_nasid, IIO_ICDR, (IIO_ICDR_PND | crbnum));
while (REMOTE_HUB_L(hubdev_info->hdi_nasid, IIO_ICDR) & IIO_ICDR_PND)
cpu_relax();
}
/*
* hubiio_crb_error_handler
*
* This routine gets invoked when a hub gets an error
* interrupt. So, the routine is running in interrupt context
* at error interrupt level.
* Action:
* It's responsible for identifying ALL the CRBs that are marked
* with error, and process them.
*
* If you find the CRB that's marked with error, map this to the
* reason it caused error, and invoke appropriate error handler.
*
* XXX Be aware of the information in the context register.
*
* NOTE:
* Use REMOTE_HUB_* macro instead of LOCAL_HUB_* so that the interrupt
* handler can be run on any node. (not necessarily the node
* corresponding to the hub that encountered error).
*/
void hubiio_crb_error_handler(struct hubdev_info *hubdev_info)
{
nasid_t nasid;
ii_icrb0_a_u_t icrba; /* II CRB Register A */
ii_icrb0_b_u_t icrbb; /* II CRB Register B */
ii_icrb0_c_u_t icrbc; /* II CRB Register C */
ii_icrb0_d_u_t icrbd; /* II CRB Register D */
ii_icrb0_e_u_t icrbe; /* II CRB Register D */
int i;
int num_errors = 0; /* Num of errors handled */
ioerror_t ioerror;
nasid = hubdev_info->hdi_nasid;
/*
* XXX - Add locking for any recovery actions
*/
/*
* Scan through all CRBs in the Hub, and handle the errors
* in any of the CRBs marked.
*/
for (i = 0; i < IIO_NUM_CRBS; i++) {
/* Check this crb entry to see if it is in error. */
icrbb.ii_icrb0_b_regval = REMOTE_HUB_L(nasid, IIO_ICRB_B(i));
if (icrbb.b_mark == 0) {
continue;
}
icrba.ii_icrb0_a_regval = REMOTE_HUB_L(nasid, IIO_ICRB_A(i));
IOERROR_INIT(&ioerror);
/* read other CRB error registers. */
icrbc.ii_icrb0_c_regval = REMOTE_HUB_L(nasid, IIO_ICRB_C(i));
icrbd.ii_icrb0_d_regval = REMOTE_HUB_L(nasid, IIO_ICRB_D(i));
icrbe.ii_icrb0_e_regval = REMOTE_HUB_L(nasid, IIO_ICRB_E(i));
IOERROR_SETVALUE(&ioerror, errortype, icrbb.b_ecode);
/* Check if this error is due to BTE operation,
* and handle it separately.
*/
if (icrbd.d_bteop ||
((icrbb.b_initiator == IIO_ICRB_INIT_BTE0 ||
icrbb.b_initiator == IIO_ICRB_INIT_BTE1) &&
(icrbb.b_imsgtype == IIO_ICRB_IMSGT_BTE ||
icrbb.b_imsgtype == IIO_ICRB_IMSGT_SN1NET))) {
int bte_num;
if (icrbd.d_bteop)
bte_num = icrbc.c_btenum;
else /* b_initiator bit 2 gives BTE number */
bte_num = (icrbb.b_initiator & 0x4) >> 2;
hubiio_crb_free(hubdev_info, i);
bte_crb_error_handler(nasid_to_cnodeid(nasid), bte_num,
i, &ioerror, icrbd.d_bteop);
num_errors++;
continue;
}
}
}
/*
* Function : hub_error_init
* Purpose : initialize the error handling requirements for a given hub.
* Parameters : cnode, the compact nodeid.
* Assumptions : Called only once per hub, either by a local cpu. Or by a
* remote cpu, when this hub is headless.(cpuless)
* Returns : None
*/
void hub_error_init(struct hubdev_info *hubdev_info)
{
if (request_irq(SGI_II_ERROR, (void *)hub_eint_handler, SA_SHIRQ,
"SN_hub_error", (void *)hubdev_info))
printk("hub_error_init: Failed to request_irq for 0x%p\n",
hubdev_info);
return;
}
/*
* Function : ice_error_init
* Purpose : initialize the error handling requirements for a given tio.
* Parameters : cnode, the compact nodeid.
* Assumptions : Called only once per tio.
* Returns : None
*/
void ice_error_init(struct hubdev_info *hubdev_info)
{
if (request_irq
(SGI_TIO_ERROR, (void *)hub_eint_handler, SA_SHIRQ, "SN_TIO_error",
(void *)hubdev_info))
printk("ice_error_init: request_irq() error hubdev_info 0x%p\n",
hubdev_info);
return;
}
