/*
* linux/arch/arm/mm/proc-v7.S
*
* Copyright (C) 2001 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This is the "shell" of the ARMv7 processor support.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include "proc-macros.S"
#define TTB_C (1 << 0)
#define TTB_S (1 << 1)
#define TTB_RGN_OC_WT (2 << 3)
#define TTB_RGN_OC_WB (3 << 3)
ENTRY(cpu_v7_proc_init)
mov pc, lr
ENDPROC(cpu_v7_proc_init)
ENTRY(cpu_v7_proc_fin)
mov pc, lr
ENDPROC(cpu_v7_proc_fin)
/*
* cpu_v7_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
*
* It is assumed that:
*/
.align 5
ENTRY(cpu_v7_reset)
mov pc, r0
ENDPROC(cpu_v7_reset)
/*
* cpu_v7_do_idle()
*
* Idle the processor (eg, wait for interrupt).
*
* IRQs are already disabled.
*/
ENTRY(cpu_v7_do_idle)
wfi
mov pc, lr
ENDPROC(cpu_v7_do_idle)
ENTRY(cpu_v7_dcache_clean_area)
#ifndef TLB_CAN_READ_FROM_L1_CACHE
dcache_line_size r2, r3
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, r2
subs r1, r1, r2
bhi 1b
dsb
#endif
mov pc, lr
ENDPROC(cpu_v7_dcache_clean_area)
/*
* cpu_v7_switch_mm(pgd_phys, tsk)
*
* Set the translation table base pointer to be pgd_phys
*
* - pgd_phys - physical address of new TTB
*
* It is assumed that:
* - we are not using split page tables
*/
ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_MMU
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
orr r0, r0, #TTB_RGN_OC_WB @ mark PTWs outer cacheable, WB
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
#endif
mov pc, lr
ENDPROC(cpu_v7_switch_mm)
/*
* cpu_v7_set_pte_ext(ptep, pte)
*
* Set a level 2 translation table entry.
*
* - ptep - pointer to level 2 translation table entry
* (hardware version is stored at -1024 bytes)
* - pte - PTE value to store
* - ext - value for extended PTE bits
*/
ENTRY(cpu_v7_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
bic r3, r1, #0x000003f0
bic r3, r3, #PTE_TYPE_MASK
orr r3, r3, r2
orr r3, r3, #PTE_EXT_AP0 | 2
tst r2, #1 << 4
orrne r3, r3, #PTE_EXT_TEX(1)
tst r1, #L_PTE_WRITE
tstne r1, #L_PTE_DIRTY
orreq r3, r3, #PTE_EXT_APX
tst r1, #L_PTE_USER
orrne r3, r3, #PTE_EXT_AP1
tstne r3, #PTE_EXT_APX
bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
tst r1, #L_PTE_EXEC
orreq r3, r3, #PTE_EXT_XN
tst r1, #L_PTE_YOUNG
tstne r1, #L_PTE_PRESENT
moveq r3, #0
str r3, [r0]
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
#endif
mov pc, lr
ENDPROC(cpu_v7_set_pte_ext)
cpu_v7_name:
.ascii "ARMv7 Processor"
.align
.section ".text.init", #alloc, #execinstr
/*
* __v7_setup
*
* Initialise TLB, Caches, and MMU state ready to switch the MMU
* on. Return in r0 the new CP15 C1 control register setting.
*
* We automatically detect if we have a Harvard cache, and use the
* Harvard cache control instructions insead of the unified cache
* control instructions.
*
* This should be able to cover all ARMv7 cores.
*
* It is assumed that:
* - cache type register is implemented
*/
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
ldmia r12, {r0-r5, r7, r9, r11, lr}
mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#endif
dsb
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
mcr p15, 0, r10, c2, c0, 2 @ TTB control register
orr r4, r4, #TTB_RGN_OC_WB @ mark PTWs outer cacheable, WB
mcr p15, 0, r4, c2, c0, 0 @ load TTB0
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
mov r10, #0x1f @ domains 0, 1 = manager
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
#endif
ldr r5, =0xff0aa1a8
ldr r6, =0x40e040e0
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
adr r5, v7_crval
ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
mov pc, lr @ return to head.S:__ret
ENDPROC(__v7_setup)
/*
* V X F I D LR
* .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM
* rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
* 0 110 0011 1.00 .111 1101 < we want
*/
.type v7_crval, #object
v7_crval:
crval clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c
__v7_setup_stack:
.space 4 * 11 @ 11 registers
.type v7_processor_functions, #object
ENTRY(v7_processor_functions)
.word v7_early_abort
.word pabort_ifar
.word cpu_v7_proc_init
.word cpu_v7_proc_fin
.word cpu_v7_reset
.word cpu_v7_do_idle
.word cpu_v7_dcache_clean_area
.word cpu_v7_switch_mm
.word cpu_v7_set_pte_ext
.size v7_processor_functions, . - v7_processor_functions
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv7"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v7"
.size cpu_elf_name, . - cpu_elf_name
.align
.section ".proc.info.init", #alloc, #execinstr
/*
* Match any ARMv7 processor core.
*/
.type __v7_proc_info, #object
__v7_proc_info:
.long 0x000f0000 @ Required ID value
.long 0x000f0000 @ Mask for ID
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __v7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_v7_name
.long v7_processor_functions
.long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
.size __v7_proc_info, . - __v7_proc_info
