/*
* marzen board support
*
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2011 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/dma-mapping.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/spi/spi.h>
#include <linux/spi/sh_hspi.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <mach/hardware.h>
#include <mach/r8a7779.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/traps.h>
/* Fixed 3.3V regulator to be used by SDHI0 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
};
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
/* SMSC LAN89218 */
static struct resource smsc911x_resources[] = {
[0] = {
.start = 0x18000000, /* ExCS0 */
.end = 0x180000ff, /* A1->A7 */
.flags = IORESOURCE_MEM,
},
[1] = {
.start = irq_pin(1), /* IRQ 1 */
.flags = IORESOURCE_IRQ,
},
};
static struct smsc911x_platform_config smsc911x_platdata = {
.flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
};
static struct platform_device eth_device = {
.name = "smsc911x",
.id = -1,
.dev = {
.platform_data = &smsc911x_platdata,
},
.resource = smsc911x_resources,
.num_resources = ARRAY_SIZE(smsc911x_resources),
};
static struct resource sdhi0_resources[] = {
[0] = {
.name = "sdhi0",
.start = 0xffe4c000,
.end = 0xffe4c0ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_iid(0x88),
.flags = IORESOURCE_IRQ,
},
};
static struct sh_mobile_sdhi_info sdhi0_platform_data = {
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
};
static struct platform_device sdhi0_device = {
.name = "sh_mobile_sdhi",
.num_resources = ARRAY_SIZE(sdhi0_resources),
.resource = sdhi0_resources,
.id = 0,
.dev = {
.platform_data = &sdhi0_platform_data,
}
};
/* Thermal */
static struct resource thermal_resources[] = {
[0] = {
.start = 0xFFC48000,
.end = 0xFFC48038 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device thermal_device = {
.name = "rcar_thermal",
.resource = thermal_resources,
.num_resources = ARRAY_SIZE(thermal_resources),
};
/* HSPI */
static struct resource hspi_resources[] = {
[0] = {
.start = 0xFFFC7000,
.end = 0xFFFC7018 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device hspi_device = {
.name = "sh-hspi",
.id = 0,
.resource = hspi_resources,
.num_resources = ARRAY_SIZE(hspi_resources),
};
/* LEDS */
static struct gpio_led marzen_leds[] = {
{
.name = "led2",
.gpio = RCAR_GP_PIN(4, 29),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led3",
.gpio = RCAR_GP_PIN(4, 30),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led4",
.gpio = RCAR_GP_PIN(4, 31),
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static struct gpio_led_platform_data marzen_leds_pdata = {
.leds = marzen_leds,
.num_leds = ARRAY_SIZE(marzen_leds),
};
static struct platform_device leds_device = {
.name = "leds-gpio",
.id = 0,
.dev = {
.platform_data = &marzen_leds_pdata,
},
};
static struct platform_device *marzen_devices[] __initdata = {
ð_device,
&sdhi0_device,
&thermal_device,
&hspi_device,
&leds_device,
};
static const struct pinctrl_map marzen_pinctrl_map[] = {
/* HSPI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
"hspi0", "hspi0"),
/* SCIF2 (CN18: DEBUG0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
"scif2_data_c", "scif2"),
/* SCIF4 (CN19: DEBUG1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
"scif4_data", "scif4"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_wp", "sdhi0"),
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"intc_irq1_b", "intc"),
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"lbsc_ex_cs0", "lbsc"),
/* USB0 */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
"usb0", "usb0"),
/* USB1 */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
"usb1", "usb1"),
/* USB2 */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
"usb2", "usb2"),
};
static void __init marzen_init(void)
{
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
regulator_register_fixed(1, dummy_supplies,
ARRAY_SIZE(dummy_supplies));
pinctrl_register_mappings(marzen_pinctrl_map,
ARRAY_SIZE(marzen_pinctrl_map));
r8a7779_pinmux_init();
r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
r8a7779_add_standard_devices();
r8a7779_add_usb_phy_device(&usb_phy_platform_data);
platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
}
MACHINE_START(MARZEN, "marzen")
.smp = smp_ops(r8a7779_smp_ops),
.map_io = r8a7779_map_io,
.init_early = r8a7779_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq,
.init_machine = marzen_init,
.init_late = r8a7779_init_late,
.init_time = r8a7779_earlytimer_init,
MACHINE_END
