/*
* linux/arch/arm/mach-realview/core.h
*
* Copyright (C) 2004 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_REALVIEW_H
#define __ASM_ARCH_REALVIEW_H
#include <asm/hardware/amba.h>
#include <asm/io.h>
#define __io_address(n) __io(IO_ADDRESS(n))
extern struct sys_timer realview_timer;
#define AMBA_DEVICE(name,busid,base,plat) \
static struct amba_device name##_device = { \
.dev = { \
.coherent_dma_mask = ~0, \
.bus_id = busid, \
.platform_data = plat, \
}, \
.res = { \
.start = REALVIEW_##base##_BASE, \
.end = (REALVIEW_##base##_BASE) + SZ_4K - 1,\
.flags = IORESOURCE_MEM, \
}, \
.dma_mask = ~0, \
.irq = base##_IRQ, \
/* .dma = base##_DMA,*/ \
}
/*
* These devices are connected via the core APB bridge
*/
#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ }
#define GPIO2_DMA { 0, 0 }
#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ }
#define GPIO3_DMA { 0, 0 }
#define AACI_IRQ { IRQ_AACI, NO_IRQ }
#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_MMCI0B }
#define MMCI0_DMA { 0x84, 0 }
#define KMI0_IRQ { IRQ_KMI0, NO_IRQ }
#define KMI0_DMA { 0, 0 }
#define KMI1_IRQ { IRQ_KMI1, NO_IRQ }
#define KMI1_DMA { 0, 0 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
#define SMC_IRQ { NO_IRQ, NO_IRQ }
#define SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_DMA { 0, 0 }
#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
#define CLCD_DMA { 0, 0 }
#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
#define DMAC_DMA { 0, 0 }
/*
* These devices are connected via the core APB bridge
*/
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define SCTL_DMA { 0, 0 }
#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
#define WATCHDOG_DMA { 0, 0 }
#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
#define GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
#define GPIO1_DMA { 0, 0 }
#define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
#define RTC_DMA { 0, 0 }
/*
* These devices are connected via the DMA APB bridge
*/
#define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
#define SCI_DMA { 7, 6 }
#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
#define UART0_DMA { 15, 14 }
#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
#define UART1_DMA { 13, 12 }
#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
#define UART2_DMA { 11, 10 }
#define UART3_IRQ { IRQ_UART3, NO_IRQ }
#define UART3_DMA { 0x86, 0x87 }
#define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
#define SSP_DMA { 9, 8 }
extern struct platform_device realview_flash_device;
extern struct platform_device realview_smc91x_device;
extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
extern struct clk realview_clcd_clk;
extern struct clcd_board clcd_plat_data;
extern void realview_leds_event(led_event_t ledevt);
#endif
