/*
* linux/arch/arm/mach-pxa/littleton.c
*
* Support for the Marvell Littleton Development Platform.
*
* Author: Jason Chagas (largely modified code)
* Created: Nov 20, 2006
* Copyright: (C) Copyright 2006 Marvell International Ltd.
*
* 2007-11-22 modified to align with latest kernel
* eric miao <eric.miao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/smc91x.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/pxa-regs.h>
#include <mach/mfp-pxa300.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa3xx_nand.h>
#include <mach/littleton.h>
#include "generic.h"
/* Littleton MFP configurations */
static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
/* LCD */
GPIO54_LCD_LDD_0,
GPIO55_LCD_LDD_1,
GPIO56_LCD_LDD_2,
GPIO57_LCD_LDD_3,
GPIO58_LCD_LDD_4,
GPIO59_LCD_LDD_5,
GPIO60_LCD_LDD_6,
GPIO61_LCD_LDD_7,
GPIO62_LCD_LDD_8,
GPIO63_LCD_LDD_9,
GPIO64_LCD_LDD_10,
GPIO65_LCD_LDD_11,
GPIO66_LCD_LDD_12,
GPIO67_LCD_LDD_13,
GPIO68_LCD_LDD_14,
GPIO69_LCD_LDD_15,
GPIO70_LCD_LDD_16,
GPIO71_LCD_LDD_17,
GPIO72_LCD_FCLK,
GPIO73_LCD_LCLK,
GPIO74_LCD_PCLK,
GPIO75_LCD_BIAS,
/* SSP2 */
GPIO25_SSP2_SCLK,
GPIO27_SSP2_TXD,
GPIO17_GPIO, /* SFRM as chip-select */
/* Debug Ethernet */
GPIO90_GPIO,
/* Keypad */
GPIO107_KP_DKIN_0,
GPIO108_KP_DKIN_1,
GPIO115_KP_MKIN_0,
GPIO116_KP_MKIN_1,
GPIO117_KP_MKIN_2,
GPIO118_KP_MKIN_3,
GPIO119_KP_MKIN_4,
GPIO120_KP_MKIN_5,
GPIO121_KP_MKOUT_0,
GPIO122_KP_MKOUT_1,
GPIO123_KP_MKOUT_2,
GPIO124_KP_MKOUT_3,
GPIO125_KP_MKOUT_4,
};
static struct resource smc91x_resources[] = {
[0] = {
.start = (LITTLETON_ETH_PHYS + 0x300),
.end = (LITTLETON_ETH_PHYS + 0xfffff),
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
.end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
}
};
static struct smc91x_platdata littleton_smc91x_info = {
.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
SMC91X_NOWAIT | SMC91X_USE_DMA,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev = {
.platform_data = &littleton_smc91x_info,
},
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
[0] = {
/* VGA */
.pixclock = 38250,
.xres = 480,
.yres = 640,
.bpp = 16,
.hsync_len = 8,
.left_margin = 8,
.right_margin = 24,
.vsync_len = 2,
.upper_margin = 2,
.lower_margin = 4,
.sync = 0,
},
[1] = {
/* QVGA */
.pixclock = 153000,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 8,
.left_margin = 8,
.right_margin = 88,
.vsync_len = 2,
.upper_margin = 2,
.lower_margin = 2,
.sync = 0,
},
};
static struct pxafb_mach_info littleton_lcd_info = {
.modes = tpo_tdo24mtea1_modes,
.num_modes = 2,
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
static void littleton_init_lcd(void)
{
set_pxa_fb_info(&littleton_lcd_info);
}
#else
static inline void littleton_init_lcd(void) {};
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
static struct pxa2xx_spi_master littleton_spi_info = {
.num_chipselect = 1,
};
static void littleton_tdo24m_cs(u32 cmd)
{
gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
}
static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
.rx_threshold = 1,
.tx_threshold = 1,
.cs_control = littleton_tdo24m_cs,
};
static struct spi_board_info littleton_spi_devices[] __initdata = {
{
.modalias = "tdo24m",
.max_speed_hz = 1000000,
.bus_num = 2,
.chip_select = 0,
.controller_data= &littleton_tdo24m_chip,
},
};
static void __init littleton_init_spi(void)
{
int err;
err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
if (err) {
pr_warning("failed to request GPIO for LCS CS\n");
return;
}
gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
pxa2xx_set_spi_info(2, &littleton_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
}
#else
static inline void littleton_init_spi(void) {}
#endif
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int littleton_matrix_key_map[] = {
/* KEY(row, col, key_code) */
KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
KEY(0, 3, KEY_KPASTERISK), /* * */
KEY(2, 3, KEY_KPDOT), /* # */
KEY(5, 4, KEY_ENTER),
KEY(5, 0, KEY_UP),
KEY(5, 1, KEY_DOWN),
KEY(5, 2, KEY_LEFT),
KEY(5, 3, KEY_RIGHT),
KEY(3, 2, KEY_HOME),
KEY(4, 1, KEY_END),
KEY(3, 3, KEY_BACK),
KEY(4, 0, KEY_SEND),
KEY(4, 2, KEY_VOLUMEUP),
KEY(4, 3, KEY_VOLUMEDOWN),
KEY(3, 0, KEY_F22), /* soft1 */
KEY(3, 1, KEY_F23), /* soft2 */
};
static struct pxa27x_keypad_platform_data littleton_keypad_info = {
.matrix_key_rows = 6,
.matrix_key_cols = 5,
.matrix_key_map = littleton_matrix_key_map,
.matrix_key_map_size = ARRAY_SIZE(littleton_matrix_key_map),
.enable_rotary0 = 1,
.rotary0_up_key = KEY_UP,
.rotary0_down_key = KEY_DOWN,
.debounce_interval = 30,
};
static void __init littleton_init_keypad(void)
{
pxa_set_keypad_info(&littleton_keypad_info);
}
#else
static inline void littleton_init_keypad(void) {}
#endif
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
static struct mtd_partition littleton_nand_partitions[] = {
[0] = {
.name = "Bootloader",
.offset = 0,
.size = 0x060000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
[1] = {
.name = "Kernel",
.offset = 0x060000,
.size = 0x200000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
[2] = {
.name = "Filesystem",
.offset = 0x0260000,
.size = 0x3000000, /* 48M - rootfs */
},
[3] = {
.name = "MassStorage",
.offset = 0x3260000,
.size = 0x3d40000,
},
[4] = {
.name = "BBT",
.offset = 0x6FA0000,
.size = 0x80000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* NOTE: we reserve some blocks at the end of the NAND flash for
* bad block management, and the max number of relocation blocks
* differs on different platforms. Please take care with it when
* defining the partition table.
*/
};
static struct pxa3xx_nand_platform_data littleton_nand_info = {
.enable_arbiter = 1,
.parts = littleton_nand_partitions,
.nr_parts = ARRAY_SIZE(littleton_nand_partitions),
};
static void __init littleton_init_nand(void)
{
pxa3xx_set_nand_info(&littleton_nand_info);
}
#else
static inline void littleton_init_nand(void) {}
#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
static void __init littleton_init(void)
{
/* initialize MFP configurations */
pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
/*
* Note: we depend bootloader set the correct
* value to MSC register for SMC91x.
*/
platform_device_register(&smc91x_device);
littleton_init_spi();
littleton_init_lcd();
littleton_init_keypad();
littleton_init_nand();
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
.phys_io = 0x40000000,
.boot_params = 0xa0000100,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = pxa_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = littleton_init,
MACHINE_END
